README.md

various commit SLAX scripts for Junos

GTSM.slax

Currently, this script does NOT look inside routing-instances

A commit script that will look for apply-macro GTSM in a BGP group and take the following action:

• add multi-hop ttl 255 to the BGP group
• add the neighbor address to a family-specific prefix list (v4 or v6)

This script assumes that there is a filter applied to the loopback that uses these prefixes-lists to perform the filtering. For example:

family inet6 {
    filter protect-RE_v6 {
        term GTSM {
            from {
                prefix-list {
                    pf_GTSM_neighbors_v6;
                }
                next-header tcp;
                port bgp;
                hop-limit-except 255;
            }
            then discard;
        }
    }
}


family inet {
    filter protect-RE_v4 {
        term GTSM {
            from {
                prefix-list {
                    pf_GTSM_neighbors_v4;
                }
                protocol tcp;
                ttl-except 255;
                port bgp;
            }
            then {
                discard;
            }
        }
    }
}

These terms can be added to the loopback filter before any peers are enabled for GTSM. In that case, the prefix-list needs to exist, even if it is empty.

requireIFdescriptions.slax

A commit script that will cause commit to fail unless each PHY interface that exists in the configuration has a description

If the interface has multiple units, each unit requires a description (the logic here is that a with a single unit, the description of the parent PHY will suffice)

requireBGPpolicy.slax

A commit script to check all external BGP peers- if no policy, apply default DENY policy. This implements the behavior described in RFC 8212.

requires po_DEFAULT-BGP-POLICY-DENY-ALL to be configured

policy-statement po_DEFAULT-BGP-POLICY-DENY-ALL {
    term reject-everything {
        then reject;
    }
}