look at blheli suite:
https://github.com/4712/BLHeliSuite/releases
you can flash the esc to a late enough firmware that supports 3D, set that, then from 1500 to 2K pwm is forward and 1499 to 1000 is backwards.
if it is a blheli32 esc - different configurator:
https://drive.google.com/drive/folders/1Y1bUMnRRolmMD_lezL0FYd3aMBrNzCig
Do you know how Bheli reverses the motor direction in their configuration SW. I’m thinking they are re-flashing the ESC micro to do it. Wondering if there was an alternate control sequence I could issue thru the ESC PWM control wire. I’m trying to reverse the motor just after the inhale cycle completes to deflate the mask. If the mask gets too inflated during the inhale cycle it false triggers the pressure sensor prematurely for the exhale cycle. I can fix it in timing but I have to terminate the inhale cycle a little too early
look at blheli suite:
https://github.com/4712/BLHeliSuite/releases
you can flash the esc to a late enough firmware that supports 3D, set that, then from 1500 to 2K pwm is forward and 1499 to 1000 is backwards.
if it is a blheli32 esc - different configurator:
https://drive.google.com/drive/folders/1Y1bUMnRRolmMD_lezL0FYd3aMBrNzCig
Do you know how Bheli reverses the motor direction in their configuration SW. I’m thinking they are re-flashing the ESC micro to do it. Wondering if there was an alternate control sequence I could issue thru the ESC PWM control wire. I’m trying to reverse the motor just after the inhale cycle completes to deflate the mask. If the mask gets too inflated during the inhale cycle it false triggers the pressure sensor prematurely for the exhale cycle. I can fix it in timing but I have to terminate the inhale cycle a little too early