Provision Harvester cluster on MS-02 nodes

[jmgilman]

PXE boot the MS-02 nodes and install Harvester HCI to create the virtualization layer.

Prerequisites:

• Tinkerbell running on UM760 with Harvester workflow
• Hardware XRs registered for all 3 MS-02 nodes
• Physical network configured (2.5GbE to VP6630, SFP+ LACP to switch)

Tasks:

• Power on MS-02 node 1 with PXE boot enabled
• Verify Tinkerbell workflow executes Harvester installation
• Wait for first node to complete (~30 min)
• Power on MS-02 nodes 2 and 3
• Wait for nodes to join Harvester cluster
• Verify 3-node Harvester cluster is healthy:
  • All nodes show Ready
  • Longhorn storage operational (3 replicas)
  • Harvester UI accessible

Harvester Cluster:

Node	IP (VLAN 10)	Role
ms02-node1	10.10.10.11	Control Plane + Compute
ms02-node2	10.10.10.12	Control Plane + Compute
ms02-node3	10.10.10.13	Control Plane + Compute

Expected Duration: ~1.5 hours (Harvester install is slow)

Reference:

• docs/architecture/appendices/B_bootstrap_procedure.md (Step 13)
• docs/architecture/05_building_blocks/01_harvester_hci.md

[linear]

HOM-11