Adapter is dropping inputs/having sticky buttons in OG Xbox Mode

[DeadPlayin]

Describe the bug
The adapter is dropping inputs/having sticky buttons when I'm using it in the OG Xbox mode. Whenever I go to press multiple buttons at once, the controller doesn't recognize all the inputs, or one of the buttons will get stuck.

What type of controller do you have the issue with?
8bitdo Ultimate 2C - HID\VID_2DC8 PID_310A
GameSir G7 SE - HID\VID_045E PID_02FF

What platform are you using the OGX-Mini on?
OG Xbox

What board are you using?
Pi Pico

[MegaCadeDev]

Neither of those controllers are supported. I won't be able to replicate your issue without them to see if it's a controller issue.

[DeadPlayin]

Neither of those controllers are supported. I won't be able to replicate your issue without them to see if it's a controller issue.

What controllers with Hall-Effect/TMR sticks are supported (if you know off the top of your head)? Also, both of the controllers I tested are brand new, and have been tested outside of the adapter.

[DeadPlayin]

Here's the file I got from using the controller capture:

8BitDo_Ultimate_2C_Wireless_Controller_20260717_123752.txt

[MegaCadeDev]

So the thing is that it's not the condition of the controller it's if the adapter is reading the reports wrong or if buttons are being spammed it'll drop inputs because the report is being over written. Currently I only support first party controllers and very few third party because I don't get enough donations to buy all the controllers. I can see about getting one of these in the future but I have no way of troubleshooting it right now.

[DeadPlayin]

So the thing is that it's not the condition of the controller it's if the adapter is reading the reports wrong or if buttons are being spammed it'll drop inputs because the report is being over written. Currently I only support first party controllers and very few third party because I don't get enough donations to buy all the controllers. I can see about getting one of these in the future but I have no way of troubleshooting it right now.

Ah, gotchu. I understand that. I know when I tested the Dualsense on the OG Xbox and did the same inputs, it worked, so that makes sense. Thanks for the responses, and I hope more donations come in for you, because I know it's a lot of work, and it would help a lot of people.

The last question I have for now is which controllers have you tested that have Hall-Effect joysticks?

[MegaCadeDev]

I don't know any OEM controllers that have hall effect joysticks. I've only tested what's listed on the repo so far.

[MegaCadeDev]

Also is this just a plain Pico that doesn't have Bluetooth? If so I don't have one of those to replicate your issue with either as I only have Pico W and 2 W for those boards.

[DeadPlayin]

I don't know any OEM controllers that have hall effect joysticks. I've only tested what's listed on the repo so far.

Gotchu. I saw a section for GameSir, that featured the G7 Pro. That controller does have Hall-Effect sticks, so I was wondering if you tested it.

[DeadPlayin]

Also is this just a plain Pico that doesn't have Bluetooth? If so I don't have one of those to replicate your issue with either as I only have Pico W and 2 W for those boards.

Yeah, it’s just a plain Pico. I’ll see if I can tinker with it, and learn something new with the firmware. Thanks for the responses!

[MegaCadeDev]

I just have a bunch of IDs on it for popular controllers. It likely needs a driver written for it. If you're not able to figure it out you're welcome to make donations on KoFi and I'll work on a driver so it's fully supported.

[DeadPlayin]

I just have a bunch of IDs on it for popular controllers. It likely needs a driver written for it. If you're not able to figure it out you're welcome to make donations on KoFi and I'll work on a driver so it's fully supported.

Gotchu, sounds good