RF Explorer 3G+ IoT on RPi4 #33
Description
Has anyone managed to get this board(RF Explorer 3G+ IoT) up and running on Python 3.13 on Raspberry Pi 4? PIN21 goes high once and then stays at zero. After I changed the PIN to always be at one (500000), I got this
RFE_Example_IoT_2.pymple_IoT_2.py
Detected COM ports:
- /dev/ttyS0
- /dev/ttyAMA0
Detected OS: Linux
Error in RFCommunicator - IsConnectedPort()Could not configure port: (5, 'Input/output error')
/dev/ttyAMA0 is a valid available port.
RF Explorer Valid Ports found: 1 - /dev/ttyAMA0
User COM port: void
Connected: /dev/ttyAMA0, 500000 bauds
Waiting for reset (calling ProcessReceivedString)...
Requesting config...
RF Explorer 01.16 18-Jan-18 02.01.01
Calibrated:1
User settings: Span: 100MHz - Start freq: 500MHz - Stop freq: 900MHz
Max Span size: 100.0MHz (using device max)
Device max freq: 440.0MHz (using device range)
RF Explorer 01.16 18-Jan-18 02.01.01
Calibrated:1
RF Explorer 01.16 18-Jan-18 02.01.01
Calibrated:1
But it didn't work anymore.
Do you have proper documentation?
I don't want to throw €130 in the trash.