Double activations 1% of the time.

[seanparkross]

Hi folks. During normal typing I get double activations about 1% of the time. Over all keys. Not any specific ones. My Mac key repeat rate and delay until repeat settings are here:

Is there a debounce setting or something similar in Agent I can set?

[kareltucek]

You can override it by putting following into a macro named $onInit

set debounceDelay 50

However, the default is 50ms, which is already a pretty high value, so I expect it won't be the culprit.

---

I would try increasing the delay until repeat to maximum and see if it solves the issue.

I don't have ideas as to possible firmware-side causes.

Still: what is the firmware version, uhk model, switch type? Have you customized any "typing behavior" settings?

[seanparkross]

I would try increasing the delay until repeat to maximum and see if it solves the issue.

Thanks have done so, will report back. The delay until repeat setting being relatively short is because I want to move the cursor around text blocks quickly.

UHK 60 v2
Firmware v17.0.0
Agent version: 10.0.0

Have you customized any "typing behavior" settings?

No. My setup is pretty vanilla. Except for these switches which haven't given me problems in the past:

https://milktooth.com/products/silent-bluish-white?srsltid=AfmBOor29uhMG3bSBs0os_qMKlSUMBMWOOe2TGHAC9ejPaEaiUYn6tPh

User Config:
UserConfiguration.json

Thanks for your help & advice