Intelligent Go Charging Checkbox

[iang66]

Hi,

Installed through Docker on Unraid and I'm trying to complete setup.

Am on Intelligent Go from Octopus and I'm looking for the "Intelligent Go Checkbox" in the settings screen that is referenced in the documentation.

Have set API from Octopus, Solis & Solcast successfully and info is being displayed correctly but cannot find the checkbox.

Any guidance gratefully received

[Webreaper]

The checkbox won't appear unless you've entered the Octopus API and it's successfully detected that you're on IOG. If you've done that and it's still not showing can you send me a screenshot of the settings page showing the tariff it's identified?

[MartyMoose30053]

I noticed this, you have to hit save and test charge, it then appeared

[iang66]

Thank you both, screenshot taken and ready to send, test charge initiated.. will update shortly!

[Webreaper]

You shouldn't need to test charge for the IOG checkbox to appear. Just save the config, and go back into the settings screen, and if it's identified the tariff correctly the checkbox should be there.

[iang66]

Hi Mark, Screenshot as requested Kind regards, Ian Sent with [Proton Mail](https://proton.me/mail/home) secure email.

…

On Monday, 22 September 2025 at 18:58, Mark Otway ***@***.***> wrote: Webreaper left a comment [(Webreaper/SolisAgileManager#214)](#214 (comment)) You shouldn't need to test charge for the IOG checkbox to appear. Just save the config, and go back into the settings screen, and if it's identified the tariff correctly the checkbox should be there. — Reply to this email directly, [view it on GitHub](#214 (comment)), or [unsubscribe](https://github.com/notifications/unsubscribe-auth/APGIUODNACJYHY2ZANTGQOD3UA2DFAVCNFSM6AAAAACHGBMBEWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTGMRQGUZTSNZWGY). You are receiving this because you authored the thread.Message ID: ***@***.***>

[iang66]

Test charge unsuccessful, rebooted and tried again, no joy.

IOG checkbox not there, tariff showing in config logs as "Found Octopus Product/Contract: E-1R-INTELLI-FIX-12M-25-04-10-B"

[Webreaper]

Screenshot as requested

There's no image attached here?

Can you resend - email it to mark@otway.com please as it's got sensitive info on it.

[iang66]

Thanks Mark, [Octopus.png] Going to try a Windows VM with the same info.. probably in the morning! Sent with [Proton Mail](https://proton.me/mail/home) secure email.

…

On Monday, 22 September 2025 at 20:39, Mark Otway ***@***.***> wrote: Webreaper left a comment [(Webreaper/SolisAgileManager#214)](#214 (comment)) > Screenshot as requested There's no image attached here? Can you resend - email it to ***@***.*** please as it's got sensitive info on it. — Reply to this email directly, [view it on GitHub](#214 (comment)), or [unsubscribe](https://github.com/notifications/unsubscribe-auth/APGIUOHIQMR2D7ZOJRHSHQL3UBF7JAVCNFSM6AAAAACHGBMBEWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTGMRRGEYTONZRGM). You are receiving this because you authored the thread.Message ID: ***@***.***>

[Webreaper]

Still no attachment. Can you please just email it to me?

[iang66]

Morning, That's odd, was sent as an attachment and inline, trying again, logs txt file attached too [Octopus JPEG.jpg] Kind regards, Ian Sent with [Proton Mail](https://proton.me/mail/home) secure email.

On Monday, 22 September 2025 at 21:27, Mark Otway ***@***.***> wrote: Webreaper left a comment [(Webreaper/SolisAgileManager#214)](#214 (comment)) Still no attachment. Can you please just email it to me? — Reply to this email directly, [view it on GitHub](#214 (comment)), or [unsubscribe](https://github.com/notifications/unsubscribe-auth/APGIUOAJNIJJL66YICUFV7D3UBLTTAVCNFSM6AAAAACHGBMBEWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTGMRRGM3TONJTHE). You are receiving this because you authored the thread.Message ID: ***@***.***>

[08:16:04.845--INF] =========================================================== [08:16:04.864--INF] Application started. Build version v1.0.698.0 Logs being written to /appdata [08:16:04.865--INF] Running in Docker [08:16:04.865--INF] Current timezone: BST [08:16:04.897--INF] Config loaded [08:16:04.897--INF] Octopus Account number was specified [08:16:04.897--INF] Octopus API Key was specified [08:16:04.897--INF] Octopus Product Code: E-1R-INTELLI-FIX-12M-25-04-10-B [08:16:05.091--INF] Now listening on: http://[::]:5169 [08:16:05.092--INF] Application started. Press Ctrl+C to shut down. [08:16:05.092--INF] Hosting environment: Production [08:16:05.092--INF] Content root path: /app [08:16:05.398--INF] Battery SOC is zero on first refresh - forcing update from inverter... [08:16:05.697--INF] Retrieved data for station 1298491919448956952 [08:16:05.700--INF] Refreshed state: SOC = 12%, Current PV = 0.18kW, House Load = 0.59kW, Damped Forecast today: 0.00kWh, tomorrow: 0.00kWh [08:16:05.883--INF] Retrieved 2 rates from Octopus (23-Sep-2025 04:30 - 24-Sep-2025 04:30) for product E-1R-INTELLI-FIX-12M-25-04-10-B [08:16:05.886--INF] 43 new Octopus rates available to 24-Sep-2025 05:30 (cheapest: 7.00035p/kWh, peak: 26.736045p/kWh) [08:16:05.906--INF] Loaded 2 entries from execution history file SolisManagerExecutionHistory.csv [08:16:08.157--INF] Inverter already in correct state (0, 0, 00:00-00:00, 00:00-00:00) so no charge instructions need to be applied [08:16:08.162--INF] Enriching history with PV yield for 1 days [08:16:08.802--INF] Retrieved 733 inverter stats for 23-Sep-2025 [08:16:09.392--INF] Found Octopus Product/Contract: E-1R-INTELLI-FIX-12M-25-04-10-B, Starts 16-Apr-2025 [08:16:09.394--INF] Updating inverter time to 2025-09-23 08:16:09 avoid drift... [08:19:00.256--INF] Refreshed state: SOC = 12%, Current PV = 0.21kW, House Load = 0.56kW, Damped Forecast today: 0.00kWh, tomorrow: 0.00kWh [08:19:56.283--INF] Querying consumption data from 08/22/2025 07:19:28 to 09/21/2025 07:19:28 [08:19:56.284--INF] Requesting consumption data for import meter S/N 19L3210257 [08:19:56.286--INF] Requesting consumption data for export meter S/N 19L3210257 [08:19:57.088--INF] Found 1 tariffs for meter. Querying rates (Tariffs: E-1R-INTELLI-FIX-12M-25-04-10-B [08:19:57.164--INF] Retrieved 61 rates from Octopus (22-Aug-2025 04:30 - 21-Sep-2025 22:30) for product E-1R-INTELLI-FIX-12M-25-04-10-B [08:19:57.265--INF] Found 1 tariffs for meter. Querying rates (Tariffs: E-1R-AGILE-OUTGOING-19-05-13-B [08:19:58.278--INF] Retrieved 1440 rates from Octopus (22-Aug-2025 07:30 - 21-Sep-2025 07:30) for product E-1R-AGILE-OUTGOING-19-05-13-B [08:19:59.144--INF] Saving config to server... [08:19:59.144--INF] Found Octopus Product/Contract: E-1R-INTELLI-FIX-12M-25-04-10-B, Starts 16-Apr-2025 [08:19:59.523--INF] Inverter already in correct state (0, 0, 00:00-00:00, 00:00-00:00) so no charge instructions need to be applied [08:19:59.524--INF] Enriching history with PV yield for 1 days [08:20:00.121--INF] Retrieved 734 inverter stats for 23-Sep-2025 [08:20:00.135--INF] Running comparison for E-1R-INTELLI-FIX-12M-25-04-10-B vs E-1R-AGILE-24-10-01-B... [08:20:00.205--INF] Retrieved 2 rates from Octopus (23-Sep-2025 04:30 - 24-Sep-2025 04:30) for product E-1R-INTELLI-FIX-12M-25-04-10-B [08:20:00.294--INF] Retrieved 30 rates from Octopus (23-Sep-2025 07:00 - 23-Sep-2025 22:00) for product E-1R-AGILE-24-10-01-B [08:20:00.461--INF] Inverter already in correct state (0, 0, 00:00-00:00, 00:00-00:00) so no charge instructions need to be applied

[Webreaper]

Still no attachment. Please can you just email me the screenshot directly to mark@otway.com, rather than keep replying to this issue, where there's clearly some issue with your Proton mail setup that's preventing the image being attached.

[Webreaper]

Okay, from the log snippet above, I can see there's an IOG tariff code that I've never seen before.

I've put in a fix, which is building here: https://github.com/Webreaper/SolisAgileManager/actions/runs/17939257773

You can either update to the dev tag if you're using docker (so use webreaper/solisagilemanager:dev) or you can download the artifacts from that build job.

Once you confirm it's working, I'll create a release.

[iang66]

Perfect, that works,

Thank you

[Webreaper]

BTW, you should see #215 which may render this feature null and void