Hi everyone and thanks Aaron for the amazing firmware.
A firend of mine gave me this ESL and i managed to flash the ATC_BLE_OEPL firmware with the usual procedure connecting to a CH340G uart converter and using the web image uploader.
After tinkering around i manged to get it working using preset 40: 260 HS BWRY JD and changing the display width to 128 and the height to 250 and keeping everything else the same. As per the datasheet the display should have a widht of 122 px but can't set it because it is not dividable by 8 so i choose 128 and just have a row of 6 pixels at the bottom not showing.
Everything seems to work fine and all colors (black, white, red, yellow) seem to look good so i would ask you if you could add it as a device preset.
I'll leave some pictures as i didn't find any online, though it's similair to the nebular.
Microcontroller is HS9118
Hi everyone and thanks Aaron for the amazing firmware.
A firend of mine gave me this ESL and i managed to flash the ATC_BLE_OEPL firmware with the usual procedure connecting to a CH340G uart converter and using the web image uploader.
After tinkering around i manged to get it working using preset 40: 260 HS BWRY JD and changing the display width to 128 and the height to 250 and keeping everything else the same. As per the datasheet the display should have a widht of 122 px but can't set it because it is not dividable by 8 so i choose 128 and just have a row of 6 pixels at the bottom not showing.
Everything seems to work fine and all colors (black, white, red, yellow) seem to look good so i would ask you if you could add it as a device preset.
I'll leave some pictures as i didn't find any online, though it's similair to the nebular.
Microcontroller is HS9118