diff --git a/README.md b/README.md index d2e5d00..75119e4 100644 --- a/README.md +++ b/README.md @@ -299,32 +299,7 @@ npx skills add chainbase-labs/agentkey npx -y @agentkey/cli --auth-login ``` - - -
-Installing over SSH, inside Docker, or via OpenClaw / Claude Code remote channels - -When the installer runs on a machine you can't see (an SSH server, a Docker container, an OpenClaw runtime triggered from your phone), the default `--auth-login` would silently spawn a browser on the *remote* host — invisible to you. - -The installer detects this automatically and switches to a **scan-from-phone** flow: it prints the auth URL plus a terminal QR code, and skips the browser auto-open. Detection signals (any one fires): - -- `~/.openclaw/` exists (OpenClaw runtime) -- `$SSH_CONNECTION` / `$SSH_TTY` set -- Linux without `$DISPLAY` / `$WAYLAND_DISPLAY` - -Force the mode either way: - -```bash -# Force remote mode (URL + QR, no browser) -curl -fsSL https://agentkey.app/install.sh | bash -s -- --remote - -# Force local mode (auto-open browser, ignore heuristics) -curl -fsSL https://agentkey.app/install.sh | bash -s -- --local -``` - -PowerShell: `-Remote` / `-Local`. - -If you'd rather skip the URL/QR flow entirely and type a key manually, `npx -y @agentkey/cli --setup` opens an interactive wizard that asks for the key and lets you pick which MCP clients to write to. +**Headless / SSH / Docker?** The auth step always tries to open a browser **and** prints the URL — so on a machine without a usable display, just copy the printed URL to any device with a browser to finish auth. Prefer typing the key manually? `npx -y @agentkey/cli --setup` opens an interactive wizard instead.
diff --git a/docs/README_zh.md b/docs/README_zh.md index 4510463..5747d27 100644 --- a/docs/README_zh.md +++ b/docs/README_zh.md @@ -299,32 +299,7 @@ npx skills add chainbase-labs/agentkey npx -y @agentkey/cli --auth-login ``` - - -
-在 SSH / Docker / OpenClaw 远程通道里安装 - -如果安装命令是在你看不到屏幕的机器上跑（远程 SSH 服务器、Docker 容器、由手机触发的 OpenClaw 运行时），默认 `--auth-login` 会在远端"成功"打开一个你看不见的浏览器，然后你只能盯着 "Waiting for authorization..." 卡死。 - -安装器会自动识别这种场景，切换到"扫码授权"流程：终端里直接打印授权 URL 加二维码，不再尝试本地开浏览器。**触发条件**（任一命中即判定为远程）： - -- `~/.openclaw/` 目录存在（OpenClaw 运行时） -- `$SSH_CONNECTION` / `$SSH_TTY` 已设置 -- Linux 且无 `$DISPLAY` / `$WAYLAND_DISPLAY` - -需要强制其中一种模式： - -```bash -# 强制远程模式（URL + 二维码，不开浏览器） -curl -fsSL https://agentkey.app/install.sh | bash -s -- --remote - -# 强制本地模式（自动开浏览器，无视启发式判断） -curl -fsSL https://agentkey.app/install.sh | bash -s -- --local -``` - -PowerShell：`-Remote` / `-Local`。 - -如果完全不想走 URL/二维码流程、想自己手动粘 Key，可以用 `npx -y @agentkey/cli --setup` —— 交互式向导，问你要 Key 并让你勾选要写入的 MCP 客户端。 +**没 GUI / SSH / Docker？** 授权步骤会**同时**尝试开浏览器并把 URL 打印到终端 —— 在没法弹浏览器的机器上，直接把打印出来的 URL 复制到任何能开浏览器的设备完成授权即可。如果完全不想走 URL 跳转、想自己手动粘 Key，可以用 `npx -y @agentkey/cli --setup` 走交互式向导。
diff --git a/scripts/install.ps1 b/scripts/install.ps1 index b5fccd1..b887cba 100644 --- a/scripts/install.ps1 +++ b/scripts/install.ps1 @@ -11,10 +11,10 @@ Behavior mirrors install.sh: checks Node >= 18 (installs via winget/scoop/choco), auto-detects which AI agents are installed and runs `npx skills add` for them, - then `npx @agentkey/cli --auth-login` for device auth. The auth step opens a - local browser by default; under SSH / Docker / OpenClaw it switches to a - QR + URL flow that the user scans on a phone (`--no-browser` server-side flag). - MCP config is written automatically for Claude Code / Claude Desktop / Cursor. + then `npx @agentkey/cli --auth-login` for device auth. The auth step always + tries to open a local browser AND prints the URL so headless / SSH users can + copy it elsewhere. MCP config is written automatically for Claude Code / + Claude Desktop / Cursor. #> [CmdletBinding()] @@ -24,8 +24,6 @@ param( [string]$Only, [switch]$AllAgents, [switch]$ListAgents, - [switch]$Remote, - [switch]$Local, [switch]$SkipSkill, [switch]$SkipMcp, [switch]$NoTelemetry, @@ -85,7 +83,7 @@ function Write-Muted($text) { Write-Host " $text" -ForegroundColor DarkGray } function Die ($text) { Write-Err $text; exit 1 } -# ── Helpers: agent + remote detection ───────────────────────────────────── +# ── Helpers: agent detection ────────────────────────────────────────────── function Test-AgentMarker { param([string]$Marker) if ($Marker.StartsWith('cmd:')) { @@ -107,18 +105,6 @@ function Get-DetectedAgents { return @($hits | Sort-Object -Unique) } -# Detect "remote install" — context where opening a browser on this host -# is futile (SSH, Docker, OpenClaw remote channels). Mirrors the bash -# script's logic. -function Test-RemoteInstall { - if ($script:Local) { return $false } - if ($script:Remote) { return $true } - - if (Test-Path -LiteralPath "$env:USERPROFILE\.openclaw") { return $true } - if ($env:SSH_CONNECTION -or $env:SSH_TTY) { return $true } - return $false -} - # ── Help ────────────────────────────────────────────────────────────────── if ($Help) { @' @@ -134,11 +120,6 @@ Parameters: -Only Only install skill for these agents (e.g. "claude-code,cursor") -AllAgents Skip auto-detection; let 'skills' CLI install for every detected agent -ListAgents Print the agents we'd auto-select on this machine and exit - -Remote Force remote-install mode: print URL + QR for the auth step, - do NOT auto-open a local browser. Use this when running over - SSH, in WinRM, in a container, or via OpenClaw / Claude Code - remote channels. - -Local Force local mode (auto-open browser) and bypass remote heuristics -SkipSkill Skip the skill install step (only run MCP auth) -SkipMcp Skip the MCP auth step (only install the skill) -NoTelemetry Disable anonymous usage telemetry (writes @@ -148,17 +129,13 @@ Parameters: Behavior: The installer auto-detects which AI agents are on this machine and - pre-selects them for skill installation. Remote-install mode is auto- - detected from %USERPROFILE%\.openclaw and SSH env vars; override with - -Remote / -Local. + pre-selects them for skill installation. The auth step always tries + to open a browser and also prints the URL — so SSH / WinRM / Docker + / OpenClaw users can copy the URL to any device with a browser. '@ exit 0 } -if ($Remote -and $Local) { - Die '-Remote and -Local are mutually exclusive.' -} - if ($ListAgents) { $detected = Get-DetectedAgents if ($detected.Count -gt 0) { $detected -join "`n" | Write-Output } @@ -335,24 +312,9 @@ if ($SkipMcp) { Write-Step '3. Register the MCP server' Write-Muted 'Skipped (-SkipMcp)' } else { - $isRemote = Test-RemoteInstall - $authArgs = @('--auth-login') - - if ($isRemote) { - Write-Step '3. Register the MCP server (remote auth: scan QR with phone)' - Write-Info 'Detected remote install context — printing QR + URL instead of opening a browser here.' - if (Test-Path -LiteralPath "$env:USERPROFILE\.openclaw") { - Write-Muted ' reason: %USERPROFILE%\.openclaw exists (OpenClaw runtime)' - } elseif ($env:SSH_CONNECTION -or $env:SSH_TTY) { - Write-Muted ' reason: SSH session detected' - } - Write-Muted 'Override with -Local if you want a browser opened on this machine instead.' - $authArgs += '--no-browser' - } else { - Write-Step '3. Register the MCP server (browser login)' - Write-Info 'Opening your browser for AgentKey device authentication ...' - Write-Muted 'When auth finishes, the MCP server is written into Claude Code / Claude Desktop / Cursor configs.' - } + Write-Step '3. Register the MCP server' + Write-Info 'Opening your browser for AgentKey device authentication ...' + Write-Muted "If a browser doesn't open (SSH / WinRM / Docker / headless), the auth URL is also printed below — open it on any device to finish." Write-Host '' # Telemetry context for install_completed. Opt-out is honored at the @@ -383,10 +345,10 @@ if ($SkipMcp) { $env:AGENTKEY_DEVICE_FINGERPRINT = $DeviceFingerprint } - & npx -y $CliPackage @authArgs + & npx -y $CliPackage --auth-login if ($LASTEXITCODE -ne 0) { Write-Err 'MCP auth failed.' - Write-Muted "Retry manually: npx -y $CliPackage $($authArgs -join ' ')" + Write-Muted "Retry manually: npx -y $CliPackage --auth-login" exit 1 } Write-Ok 'MCP server registered' diff --git a/scripts/install.sh b/scripts/install.sh index 06cc24d..c7c6d1b 100755 --- a/scripts/install.sh +++ b/scripts/install.sh @@ -5,7 +5,6 @@ # curl -fsSL https://agentkey.app/install.sh | bash -s -- --yes # curl -fsSL https://agentkey.app/install.sh | bash -s -- --interactive # curl -fsSL https://agentkey.app/install.sh | bash -s -- --only claude-code,cursor -# curl -fsSL https://agentkey.app/install.sh | bash -s -- --remote # curl -fsSL https://agentkey.app/install.sh | bash -s -- --skip-mcp # # The whole procedural body is wrapped in `main()` so that under `curl | bash` @@ -104,10 +103,6 @@ Options: --only Only install skill for these agents (comma-separated, e.g. claude-code,cursor) --all-agents Skip auto-detection; let 'skills' CLI install for every detected agent --list-agents Print the agents we'd auto-select on this machine and exit - --remote Force remote-install mode: print URL + QR for the auth step, - do NOT auto-open a local browser. Use this when running over - SSH, in Docker, or via OpenClaw / Claude Code remote channels. - --local Force local mode (auto-open browser) and bypass remote heuristics --skip-skill Skip the skill install step (only run MCP auth) --skip-mcp Skip the MCP auth step (only install the skill) --no-telemetry Disable anonymous usage telemetry (writes @@ -118,13 +113,13 @@ Options: Behavior: Interactive mode is the default when a terminal is reachable; otherwise it falls back to --yes. The installer auto-detects which AI agents are on this - machine and pre-selects them for skill installation. Remote-install mode is - auto-detected from \$HOME/.openclaw, SSH env vars, and missing \$DISPLAY; - override with --remote / --local. + machine and pre-selects them for skill installation. The auth step always + attempts to open a browser and also prints the URL — so SSH / Docker / + OpenClaw users can copy the URL to any device with a browser. EOF } -# ── Helpers: agent + remote detection ───────────────────────────────────── +# ── Helpers: agent detection ────────────────────────────────────────────── # Expand a leading "~" to \$HOME (no glob expansion, no eval). _expand_path() { @@ -165,33 +160,6 @@ detect_agents() { fi } -# Detect "remote install" — a context where auto-opening a browser on this -# host is futile because the user isn't sitting in front of it. Mutates -# nothing; returns 0 (true) for remote, 1 (false) for local. -detect_remote() { - [ "$FORCE_LOCAL" = true ] && return 1 - [ "$FORCE_REMOTE" = true ] && return 0 - - # OpenClaw runtime — the project owner confirms ~/.openclaw exists in - # any host where OpenClaw is installed/active. Most reliable single - # signal because it doesn't depend on env-var inheritance through the - # docker → channel → shell chain. - [ -d "$HOME/.openclaw" ] && return 0 - - # Generic SSH session. - [ -n "${SSH_CONNECTION:-}" ] && return 0 - [ -n "${SSH_TTY:-}" ] && return 0 - - # Headless Linux (no GUI session). - if [ "$(uname -s)" = "Linux" ] \ - && [ -z "${DISPLAY:-}" ] \ - && [ -z "${WAYLAND_DISPLAY:-}" ]; then - return 0 - fi - - return 1 -} - install_node() { local platform="$1" ui_info "Installing Node.js v$NODE_MIN_MAJOR+ ..." @@ -253,12 +221,6 @@ main() { local PRINT_HELP=false local LIST_AGENTS=false local ALL_AGENTS=false - # FORCE_REMOTE / FORCE_LOCAL are read by detect_remote(). Declared as - # plain (non-`local`) so the helpers see them — they're dynamic-scope - # accessible either way in bash, but explicit assignment here keeps - # `set -u` happy. - FORCE_REMOTE=false - FORCE_LOCAL=false local NO_TELEMETRY=false # Snapshot original args before the parse loop shifts them away — needed @@ -273,8 +235,6 @@ main() { --only=*) ONLY_AGENTS="${1#*=}"; shift ;; --all-agents) ALL_AGENTS=true; shift ;; --list-agents) LIST_AGENTS=true; shift ;; - --remote) FORCE_REMOTE=true; shift ;; - --local) FORCE_LOCAL=true; shift ;; --skip-skill) SKIP_SKILL=true; shift ;; --skip-mcp) SKIP_MCP=true; shift ;; --no-telemetry) NO_TELEMETRY=true; shift ;; @@ -284,9 +244,6 @@ main() { done if $PRINT_HELP; then print_help; exit 0; fi - if $FORCE_REMOTE && $FORCE_LOCAL; then - die "--remote and --local are mutually exclusive" - fi if $LIST_AGENTS; then local detected @@ -468,28 +425,9 @@ main() { ui_step "3. Register the MCP server" ui_muted "Skipped (--skip-mcp)" else - # Decide local-vs-remote and route the MCP CLI flags accordingly. - local IS_REMOTE=false - if detect_remote; then IS_REMOTE=true; fi - - local AUTH_ARGS=(--auth-login) - if $IS_REMOTE; then - ui_step "3. Register the MCP server (remote auth: scan QR with phone)" - ui_info "Detected remote install context — printing QR + URL instead of opening a browser here." - if [ -d "$HOME/.openclaw" ]; then - ui_muted " reason: \$HOME/.openclaw exists (OpenClaw runtime)" - elif [ -n "${SSH_CONNECTION:-}" ] || [ -n "${SSH_TTY:-}" ]; then - ui_muted " reason: SSH session detected" - elif [ "$(uname -s)" = "Linux" ]; then - ui_muted " reason: Linux without \$DISPLAY / \$WAYLAND_DISPLAY" - fi - ui_muted "Override with --local if you want a browser opened on this machine instead." - AUTH_ARGS+=(--no-browser) - else - ui_step "3. Register the MCP server (browser login)" - ui_info "Opening your browser for AgentKey device authentication ..." - ui_muted "When auth finishes, the MCP server is written into Claude Code / Claude Desktop / Cursor configs." - fi + ui_step "3. Register the MCP server" + ui_info "Opening your browser for AgentKey device authentication ..." + ui_muted "If a browser doesn't open (SSH / Docker / headless), the auth URL is also printed below — open it on any device to finish." echo # Telemetry context for `install_completed`. Opt-out is honored at @@ -513,9 +451,9 @@ main() { export AGENTKEY_DEVICE_FINGERPRINT="$(compute_device_fingerprint "$PLATFORM")" fi - if ! npx -y "$CLI_PACKAGE" "${AUTH_ARGS[@]}"; then + if ! npx -y "$CLI_PACKAGE" --auth-login; then ui_error "MCP auth failed." - ui_muted "Retry manually: npx -y $CLI_PACKAGE ${AUTH_ARGS[*]}" + ui_muted "Retry manually: npx -y $CLI_PACKAGE --auth-login" exit 1 fi ui_ok "MCP server registered"