Somewhat similar (in terms of when it happens) issue with #85, with the difference being that everything else works except the rtsp streams.
Namely, the camera rtsp streams stop working after a random time. But I can ping the camera, connect via telnet/ftp, http server also works.
When i try to open any of the three streams in VLC, i get:
VLC is unable to open the MRL 'rtsp://192.168.100.75:554/ch0_0.h264'. Check the log for details.
Your input can't be opened
I have the EU version of the camera (22EUT4A00S). Any thoughts on why this happens?
Not sure if this is the correct log, but here it is:
Starting to log...
Hardware version informations :
hwplatform=2
Software version informations :
[sys]
version=1.8.5.1M_201512011815
[kernel]
version=3-0.8
provider=18e
devtype=18e
Firmware letter is : 'M'
The RTSP server binary version which will be used is the 'M'
The HTTP server binary version which will be used is the 'M'
Check for some files size...
-rwxr-xr-x 1 root root 144885 Oct 4 2016 /home/hd1/test/http/serverJ
-rwxr-xr-x 1 root root 144912 Oct 4 2016 /home/hd1/test/http/serverM
-rwxr-xr-x 1 root root 121932 Oct 4 2016 /home/hd1/test/rtspsvrI
-rwxr-xr-x 1 root root 39572 Oct 4 2016 /home/hd1/test/rtspsvrK
-rwxr-xr-x 1 root root 39580 Oct 4 2016 /home/hd1/test/rtspsvrM
The blue led is currently blinking
Debug mode = no
Check for wifi configuration file...*
/home/wpa_supplicant.conf
Start wifi configuration...
Status for wifi configuration=0 (0 is ok)
Wifi configuration answer:
Do network configuration 1/2 (ip and gateway)
Done
Configuration is :
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
ra0 Link encap:Ethernet HWaddr B0:D5:9D:8E:C9:92
inet addr:192.168.100.75 Bcast:192.168.100.255 Mask:255.255.255.0
inet6 addr: fe80::b2d5:9dff:fe8e:c992/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:84 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16840 (16.4 KiB) TX bytes:200 (200.0 B)
Do network configuration 2/2 (DNS)
Done
Get time from a NTP server...
But first, test the NTP server '0.uk.pool.ntp.org':
PING 0.uk.pool.ntp.org (178.79.160.57): 56 data bytes
64 bytes from 178.79.160.57: seq=0 ttl=49 time=67.386 ms
--- 0.uk.pool.ntp.org ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 67.386/67.386/67.386 ms
Previous datetime is Thu Jan 1 01:00:24 CET 1970
Done
New datetime is Thu Jan 1 01:00:24 CET 1970
Start blue led on
Start ftp server...
Check for ftp process :
1245 root 1716 S tcpsvd -vE 0.0.0.0 21 ftpd -w /
Start http server : serverM...
Check for http server process :
1272 root 1408 S ./serverM 80
Start rtsp server : rtspsvrM...
Check for rtsp process :
1346 root 2660 S < ./rtspsvrM
Processes after startup :
PID USER VSZ STAT COMMAND
1 root 1708 S init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW [kworker/u:0]
6 root 0 SW [rcu_kthread]
7 root 0 SW< [khelper]
8 root 0 SW [kworker/u:1]
143 root 0 SW [sync_supers]
145 root 0 SW [bdi-default]
146 root 0 SW< [kintegrityd]
148 root 0 SW< [kblockd]
161 root 0 SW [khubd]
174 root 0 SW< [cfg80211]
175 root 0 SW [kworker/0:1]
257 root 0 SW< [rpciod]
260 root 0 SW [kswapd0]
314 root 0 SW [fsnotify_mark]
322 root 0 SW< [nfsiod]
331 root 0 SW< [crypto]
405 root 0 SW [mtdblock0]
410 root 0 SW [mtdblock1]
415 root 0 SW [mtdblock2]
420 root 0 SW [mtdblock3]
425 root 0 SW [mtdblock4]
430 root 0 SW [mtdblock5]
435 root 0 SW [mtdblock6]
438 root 0 SW [romblock0]
441 root 0 SW [romblock1]
444 root 0 SW [romblock2]
447 root 0 SW [romblock3]
450 root 0 SW [romblock4]
453 root 0 SW [romblock5]
456 root 0 SW [romblock6]
591 root 0 SW< [kpsmoused]
600 root 0 SW [kworker/u:2]
616 root 0 SW [mmcqd/0]
620 root 0 SWN [jffs2_gcd_mtd4]
624 root 1712 S /bin/sh /etc/init.d/rcS
636 root 872 S < udevd --daemon
642 root 1704 S /bin/sh /etc/init.d/S80network
656 root 0 SWN [jffs2_gcd_mtd5]
657 root 1708 S /bin/sh ./init.sh
664 root 0 SW [flush-mtd-unmap]
675 root 1712 S /bin/sh /home/hd1/test/equip_test.sh
677 root 0 SW [flush-179:0]
682 root 1704 S telnetd
686 root 984 S /home/log_server
816 root 0 SW [RtmpTimerTask]
817 root 0 SW [RtmpMlmeTask]
818 root 0 SW [RtmpCmdQTask]
819 root 0 SW [RtmpWscTask]
949 root 0 SW [hidog]
987 root 1164 S ./peripheral
988 root 1144 S < ./dispatch
989 root 1060 S ./exnet
1123 root 3128 S /home/wpa_supplicant -B -i ra0 -c /home/wpa_supplica
1208 root 1708 S ntpd -q -p 0.uk.pool.ntp.org
1245 root 1716 S tcpsvd -vE 0.0.0.0 21 ftpd -w /
1272 root 1408 S ./serverM 80
1318 root 1716 S /usr/sbin/crond -b
1331 root 904 S /home/led_ctl -boff -boff
1341 root 97472 S ./rmm
1346 root 30892 S N ./rtspsvrM
1437 root 1708 R ps
Storage status :
Filesystem Size Used Available Use% Mounted on
/dev/root 3.5M 2.7M 864.0K 76% /
tmpfs 17.2M 16.0K 17.2M 0% /dev
/dev/mtdblock5 8.9M 8.1M 844.0K 91% /home
tmpfs 32.0M 28.0K 32.0M 0% /tmp
/dev/hd1 29.0G 9.5M 28.9G 0% /tmp/hd1
tmpfs 512.0K 16.0K 496.0K 3% /home/mmap_tmpfs
tmpfs 16.0M 0 16.0M 0% /home/tmpfs
tmpfs 16.0M 3.0M 13.0M 19% /home/jrview
/dev/hd1 29.0G 9.5M 28.9G 0% /tmp/hd1/test/http/record
Somewhat similar (in terms of when it happens) issue with #85, with the difference being that everything else works except the rtsp streams.
Namely, the camera rtsp streams stop working after a random time. But I can ping the camera, connect via telnet/ftp, http server also works.
When i try to open any of the three streams in VLC, i get:
I have the EU version of the camera (22EUT4A00S). Any thoughts on why this happens?
Not sure if this is the correct log, but here it is: