diff --git a/docs/commands/pre-install.md b/docs/commands/pre-install.md
new file mode 100644
index 0000000000..aa35e5bc95
--- /dev/null
+++ b/docs/commands/pre-install.md
@@ -0,0 +1,202 @@
+Pre-Install
+===============================================================================
+
+Usage
+-------------------------------------------------------------------------------
+Usage information can be obtained using `mas pre-install --help`
+
+```
+usage: mas pre-install [-i MAS_INSTANCE_ID] [--mas-version MAS_VERSION]
+                       [--permission-mode {cluster,namespaced,minimal}]
+                       [--apps APPS] [--no-confirm] [-h]
+
+IBM Maximo Application Suite Admin CLI v21.3.0
+Set up pre-install RBAC for MAS.
+Available only for MAS version 9.2.0 and later.
+
+Interactive Mode:
+Omitting required options will trigger an interactive prompt
+
+Target Cluster Arguments:
+Specify the target cluster and MAS instance for which pre-install RBAC should be set up.
+
+  -i, --mas-instance-id MAS_INSTANCE_ID
+                        The MAS instance ID for which pre-install RBAC will be set up
+  --mas-version MAS_VERSION
+                        The MAS version in x.y.z format used to select pre-install RBAC manifests, for example 9.2.0
+  --permission-mode {cluster,namespaced,minimal}
+                        The permission mode used to determine which pre-install RBAC manifests are set up
+  --apps APPS           Comma-separated list of apps used to filter which pre-install RBAC manifests are set up, for example core,manage,iot
+
+More:
+Additional options for pre-install.
+
+  --no-confirm          Proceed without prompting for cluster confirmation
+  -h, --help            Show this help message and exit
+```
+
+Examples
+-------------------------------------------------------------------------------
+
+### Interactive Pre-Install
+Launch an interactive pre-install session that will prompt you for all required configuration:
+
+```bash
+mas pre-install
+```
+
+### Non-Interactive Pre-Install for Namespaced Mode
+Set up pre-install RBAC for a MAS instance using namespaced permission mode:
+
+```bash
+mas pre-install \
+  --mas-instance-id prod1 \
+  --mas-version 9.2.0 \
+  --permission-mode namespaced \
+  --apps core,manage,iot \
+  --no-confirm
+```
+
+### Pre-Install for Minimal Mode
+Set up pre-install RBAC for minimal permission mode:
+
+```bash
+mas pre-install \
+  --mas-instance-id dev1 \
+  --mas-version 9.2.0 \
+  --permission-mode minimal \
+  --apps core \
+  --no-confirm
+```
+
+### Pre-Install for Cluster Mode
+Set up pre-install RBAC for cluster permission mode (optional, as cluster mode can apply RBAC during installation):
+
+```bash
+mas pre-install \
+  --mas-instance-id test1 \
+  --mas-version 9.2.0 \
+  --permission-mode cluster \
+  --apps core,manage,monitor,iot \
+  --no-confirm
+```
+
+### Pre-Install with Multiple Applications
+Set up pre-install RBAC for multiple MAS applications:
+
+```bash
+mas pre-install \
+  --mas-instance-id prod1 \
+  --mas-version 9.2.0 \
+  --permission-mode namespaced \
+  --apps core,manage,monitor,iot,predict,visualinspection \
+  --no-confirm
+```
+
+Notes
+-------------------------------------------------------------------------------
+
+### Pre-Install Process
+The pre-install command performs the following operations:
+
+1. **Validates cluster administrator permissions** - Ensures you have the required permissions to create RBAC resources
+2. **Validates MAS version** - Confirms the version is 9.2.0 or later
+3. **Validates application selection** - Ensures all specified applications are supported
+4. **Applies RBAC manifests** - Creates ClusterRoles, Roles, RoleBindings, and ServiceAccounts based on permission mode and selected applications
+
+### When to Use Pre-Install
+
+The `mas pre-install` command is used to grant necessary RBAC permissions.
+
+**If you have cluster administrator permissions:**
+- Run `mas install` directly - it will automatically handle the pre-install RBAC setup
+
+**If you do NOT have cluster administrator permissions:**
+- A cluster administrator must run `mas pre-install` to grant the necessary permissions
+- Then you can run `mas install --skip-preinstall-rbac` to proceed with installation
+
+### Permission Modes
+
+All permission modes work with `mas pre-install`:
+
+| Permission Mode | Description |
+|----------------|-------------|
+| **cluster** | MAS has cluster-level access to manage its applications and resources across the cluster. ClusterRoles are installed. |
+| **namespaced** | No ClusterRoles are installed. MAS can manage resources only in namespaces prepared by the OpenShift admin. |
+| **minimal** | Minimal permissions with essential RBAC requirements |
+
+### Supported Applications
+
+The following applications are supported for pre-install RBAC setup:
+
+- `core` - MAS Core
+- `aiservice` - AI Service
+- `arcgis` - ArcGIS
+- `facilities` - Maximo Facilities
+- `iot` - Maximo IoT
+- `manage` - Maximo Manage
+- `monitor` - Maximo Monitor
+- `optimizer` - Maximo Optimizer
+- `predict` - Maximo Predict
+- `visualinspection` - Maximo Visual Inspection
+
+You can specify multiple applications as a comma-separated list (e.g., `core,manage,iot`).
+
+### Integration with MAS Install
+
+After running `mas pre-install`, proceed with the MAS installation using the `--skip-preinstall-rbac` flag to avoid re-applying the RBAC resources:
+
+```bash
+mas install \
+  --mas-instance-id prod1 \
+  --permission-mode namespaced \
+  --skip-preinstall-rbac \
+  ... other install parameters ...
+```
+
+### Workflow Example
+
+**Step 1: Cluster Administrator runs `mas pre-install`**
+```bash
+mas pre-install \
+  --mas-instance-id prod1 \
+  --mas-version 9.2.0 \
+  --permission-mode namespaced \
+  --apps core,manage,iot \
+  --no-confirm
+```
+
+**Step 2: MAS Installer (with limited permissions) runs `mas install`**
+```bash
+mas install \
+  --mas-instance-id prod1 \
+  --permission-mode namespaced \
+  --skip-preinstall-rbac \
+  ... other parameters ...
+```
+
+### Requirements
+
+- OpenShift cluster administrator permissions
+- MAS version 9.2.0 or later
+- Access to the target OpenShift cluster
+
+!!! warning "Administrator Permissions Required"
+    The `mas pre-install` command requires cluster administrator permissions. If you do not have these permissions, the command will fail with an error message. Only a cluster administrator can set up pre-install RBAC for MAS.
+
+### Interactive Mode
+
+When running without all required options, the command enters interactive mode and will prompt for:
+
+1. Target OpenShift cluster connection
+2. MAS instance ID
+3. MAS version (in x.y.z format)
+4. Permission mode (cluster, namespaced, or minimal)
+5. Applications to include (comma-separated list)
+
+The command will display a summary of your selections and ask for confirmation before applying the RBAC resources.
+
+### Version Compatibility
+
+!!! important
+    This command is only supported for MAS version 9.2.0 and later. If you specify an earlier version, the command will fail with an error message.
\ No newline at end of file