diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
index 7b7331cb3c726f..3a829e3c9cbcd4 100644
--- a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
@@ -23,6 +23,45 @@
 		stdout-path = "serial0";
 	};
 
+	pcie_vcc3v3: regulator-pcie-vcc3v3 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio K1_GPIO(116) GPIO_ACTIVE_HIGH>;
+		regulator-name = "pcie_vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v0>;
+	};
+
+	vcc_5v0: regulator-vcc-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc4v0: regulator-vcc4v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc4v0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		vin-supply = <&vcc_5v0>;
+	};
+
+	vcc5v0_usb30: regulator-vcc5v0-usb30 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio K1_GPIO(123) GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_usb30";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -35,6 +74,10 @@
 	};
 };
 
+&combo_phy {
+	status = "okay";
+};
+
 &eth0 {
 	phy-handle = <&rgmii0>;
 	phy-mode = "rgmii-id";
@@ -87,8 +130,182 @@
 	status = "okay";
 };
 
+&i2c8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c8_cfg>;
+	status = "okay";
+
+	pmic@41 {
+		compatible = "spacemit,p1";
+		reg = <0x41>;
+		interrupts = <64>;
+		vin1-supply = <&vcc4v0>;
+		vin2-supply = <&vcc4v0>;
+		vin3-supply = <&vcc4v0>;
+		vin4-supply = <&vcc4v0>;
+		vin5-supply = <&vcc4v0>;
+		vin6-supply = <&vcc4v0>;
+		aldoin-supply = <&vcc4v0>;
+		dldoin1-supply = <&buck5>;
+		dldoin2-supply = <&buck5>;
+
+		regulators {
+			buck1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck3_1v8: buck3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck4_3v3: buck4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			aldo1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+			};
+
+			aldo2 {
+				/* not connected */
+			};
+
+			aldo3 {
+				/* not connected */
+			};
+
+			aldo4 {
+				/* not connected */
+			};
+
+			dldo1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+			};
+
+			dldo2 {
+				/* not connected */
+			};
+
+			dldo3 {
+				/* not connected */
+			};
+
+			dldo4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			dldo5 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			dldo7 {
+				/* not connected */
+			};
+		};
+	};
+};
+
+&pcie1_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_3_cfg>;
+	status = "okay";
+};
+
+&pcie1_port {
+	phys = <&pcie1_phy>;
+	vpcie3v3-supply = <&pcie_vcc3v3>;
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_4_cfg>;
+	status = "okay";
+};
+
+&pcie2_port {
+	phys = <&pcie2_phy>;
+	vpcie3v3-supply = <&pcie_vcc3v3>;
+};
+
+&pcie2 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_2_cfg>;
 	status = "okay";
 };
+
+&usbphy2 {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vbus-supply = <&vcc5v0_usb30>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb5e3,610";
+		reg = <0x1>;
+		peer-hub = <&hub_3_0>;
+		vdd-supply = <&vcc_5v0>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb5e3,620";
+		reg = <0x2>;
+		peer-hub = <&hub_2_0>;
+		vdd-supply = <&vcc_5v0>;
+	};
+};