diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index 6efe43089a74d3..f84600f66df849 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -77,6 +77,7 @@ properties: - starfive,jh7100-hsuart - starfive,jh7100-uart - starfive,jh7110-uart + - ultrarisc,dp1000-uart - const: snps,dw-apb-uart - const: snps,dw-apb-uart diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 94beadb4024df3..55e40c10f46a29 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -34,22 +34,11 @@ #include "8250_dwlib.h" -/* Offsets for the DesignWare specific registers */ -#define DW_UART_USR 0x1f /* UART Status Register */ -#define DW_UART_DMASA 0xa8 /* DMA Software Ack */ - #define OCTEON_UART_USR 0x27 /* UART Status Register */ #define RZN1_UART_TDMACR 0x10c /* DMA Control Register Transmit Mode */ #define RZN1_UART_RDMACR 0x110 /* DMA Control Register Receive Mode */ -/* DesignWare specific register fields */ -#define DW_UART_IIR_IID GENMASK(3, 0) - -#define DW_UART_MCR_SIRE BIT(6) - -#define DW_UART_USR_BUSY BIT(0) - /* Renesas specific register fields */ #define RZN1_UART_xDMACR_DMA_EN BIT(0) #define RZN1_UART_xDMACR_1_WORD_BURST (0 << 1) @@ -948,7 +937,15 @@ static const struct dw8250_platform_data dw8250_armada_38x_data = { static const struct dw8250_platform_data dw8250_renesas_rzn1_data = { .usr_reg = DW_UART_USR, - .cpr_value = 0x00012f32, + .cpr_value = FIELD_PREP_CONST(DW_UART_CPR_ABP_DATA_WIDTH, 2) | + DW_UART_CPR_AFCE_MODE | + DW_UART_CPR_THRE_MODE | + DW_UART_CPR_ADDITIONAL_FEATURES | + DW_UART_CPR_FIFO_ACCESS | + DW_UART_CPR_FIFO_STAT | + DW_UART_CPR_SHADOW | + DW_UART_CPR_DMA_EXTRA | + DW_UART_CPR_FIFO_MODE_FROM_SIZE(16), .quirks = DW_UART_QUIRK_CPR_VALUE | DW_UART_QUIRK_IS_DMA_FC, }; @@ -962,6 +959,15 @@ static const struct dw8250_platform_data dw8250_intc10ee = { .quirks = DW_UART_QUIRK_IER_KICK, }; +static const struct dw8250_platform_data dw8250_ultrarisc_dp1000_data = { + .usr_reg = DW_UART_USR, + .cpr_value = FIELD_PREP_CONST(DW_UART_CPR_ABP_DATA_WIDTH, 2) | + DW_UART_CPR_THRE_MODE | + DW_UART_CPR_DMA_EXTRA | + DW_UART_CPR_FIFO_MODE_FROM_SIZE(32), + .quirks = DW_UART_QUIRK_CPR_VALUE, +}; + static const struct of_device_id dw8250_of_match[] = { { .compatible = "snps,dw-apb-uart", .data = &dw8250_dw_apb }, { .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data }, @@ -969,6 +975,7 @@ static const struct of_device_id dw8250_of_match[] = { { .compatible = "renesas,rzn1-uart", .data = &dw8250_renesas_rzn1_data }, { .compatible = "sophgo,sg2044-uart", .data = &dw8250_skip_set_rate_data }, { .compatible = "starfive,jh7100-uart", .data = &dw8250_skip_set_rate_data }, + { .compatible = "ultrarisc,dp1000-uart", .data = &dw8250_ultrarisc_dp1000_data }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, dw8250_of_match); diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c index b055d89cfb3937..8859e66d2d71cd 100644 --- a/drivers/tty/serial/8250/8250_dwlib.c +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -13,55 +13,6 @@ #include "8250_dwlib.h" -/* Offsets for the DesignWare specific registers */ -#define DW_UART_TCR 0xac /* Transceiver Control Register (RS485) */ -#define DW_UART_DE_EN 0xb0 /* Driver Output Enable Register */ -#define DW_UART_RE_EN 0xb4 /* Receiver Output Enable Register */ -#define DW_UART_DLF 0xc0 /* Divisor Latch Fraction Register */ -#define DW_UART_RAR 0xc4 /* Receive Address Register */ -#define DW_UART_TAR 0xc8 /* Transmit Address Register */ -#define DW_UART_LCR_EXT 0xcc /* Line Extended Control Register */ -#define DW_UART_CPR 0xf4 /* Component Parameter Register */ -#define DW_UART_UCV 0xf8 /* UART Component Version */ - -/* Receive / Transmit Address Register bits */ -#define DW_UART_ADDR_MASK GENMASK(7, 0) - -/* Line Status Register bits */ -#define DW_UART_LSR_ADDR_RCVD BIT(8) - -/* Transceiver Control Register bits */ -#define DW_UART_TCR_RS485_EN BIT(0) -#define DW_UART_TCR_RE_POL BIT(1) -#define DW_UART_TCR_DE_POL BIT(2) -#define DW_UART_TCR_XFER_MODE GENMASK(4, 3) -#define DW_UART_TCR_XFER_MODE_DE_DURING_RE FIELD_PREP(DW_UART_TCR_XFER_MODE, 0) -#define DW_UART_TCR_XFER_MODE_SW_DE_OR_RE FIELD_PREP(DW_UART_TCR_XFER_MODE, 1) -#define DW_UART_TCR_XFER_MODE_DE_OR_RE FIELD_PREP(DW_UART_TCR_XFER_MODE, 2) - -/* Line Extended Control Register bits */ -#define DW_UART_LCR_EXT_DLS_E BIT(0) -#define DW_UART_LCR_EXT_ADDR_MATCH BIT(1) -#define DW_UART_LCR_EXT_SEND_ADDR BIT(2) -#define DW_UART_LCR_EXT_TRANSMIT_MODE BIT(3) - -/* Component Parameter Register bits */ -#define DW_UART_CPR_ABP_DATA_WIDTH GENMASK(1, 0) -#define DW_UART_CPR_AFCE_MODE BIT(4) -#define DW_UART_CPR_THRE_MODE BIT(5) -#define DW_UART_CPR_SIR_MODE BIT(6) -#define DW_UART_CPR_SIR_LP_MODE BIT(7) -#define DW_UART_CPR_ADDITIONAL_FEATURES BIT(8) -#define DW_UART_CPR_FIFO_ACCESS BIT(9) -#define DW_UART_CPR_FIFO_STAT BIT(10) -#define DW_UART_CPR_SHADOW BIT(11) -#define DW_UART_CPR_ENCODED_PARMS BIT(12) -#define DW_UART_CPR_DMA_EXTRA BIT(13) -#define DW_UART_CPR_FIFO_MODE GENMASK(23, 16) - -/* Helper for FIFO size calculation */ -#define DW_UART_CPR_FIFO_SIZE(a) (FIELD_GET(DW_UART_CPR_FIFO_MODE, (a)) * 16) - /* * divisor = div(I) + div(F) * "I" means integer, "F" means fractional diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h index 7dd2a8e7b78085..1fe52332e774b2 100644 --- a/drivers/tty/serial/8250/8250_dwlib.h +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -1,11 +1,82 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* Synopsys DesignWare 8250 library header file. */ +#ifndef _SERIAL_8250_DWLIB_H_ +#define _SERIAL_8250_DWLIB_H_ + +#include +#include +#include #include #include #include "8250.h" +/* Offsets for the DesignWare specific registers */ +#define DW_UART_USR 0x1f /* UART Status Register */ +#define DW_UART_DMASA 0xa8 /* DMA Software Ack */ +#define DW_UART_TCR 0xac /* Transceiver Control Register (RS485) */ +#define DW_UART_DE_EN 0xb0 /* Driver Output Enable Register */ +#define DW_UART_RE_EN 0xb4 /* Receiver Output Enable Register */ +#define DW_UART_DLF 0xc0 /* Divisor Latch Fraction Register */ +#define DW_UART_RAR 0xc4 /* Receive Address Register */ +#define DW_UART_TAR 0xc8 /* Transmit Address Register */ +#define DW_UART_LCR_EXT 0xcc /* Line Extended Control Register */ +#define DW_UART_CPR 0xf4 /* Component Parameter Register */ +#define DW_UART_UCV 0xf8 /* UART Component Version */ + +/* Interrupt ID Register bits */ +#define DW_UART_IIR_IID GENMASK(3, 0) + +/* Modem Control Register bits */ +#define DW_UART_MCR_SIRE BIT(6) + +/* Line Status Register bits */ +#define DW_UART_LSR_ADDR_RCVD BIT(8) + +/* UART Status Register bits */ +#define DW_UART_USR_BUSY BIT(0) + +/* Transceiver Control Register bits */ +#define DW_UART_TCR_RS485_EN BIT(0) +#define DW_UART_TCR_RE_POL BIT(1) +#define DW_UART_TCR_DE_POL BIT(2) +#define DW_UART_TCR_XFER_MODE GENMASK(4, 3) +#define DW_UART_TCR_XFER_MODE_DE_DURING_RE FIELD_PREP(DW_UART_TCR_XFER_MODE, 0) +#define DW_UART_TCR_XFER_MODE_SW_DE_OR_RE FIELD_PREP(DW_UART_TCR_XFER_MODE, 1) +#define DW_UART_TCR_XFER_MODE_DE_OR_RE FIELD_PREP(DW_UART_TCR_XFER_MODE, 2) + +/* Receive / Transmit Address Register bits */ +#define DW_UART_ADDR_MASK GENMASK(7, 0) + +/* Line Extended Control Register bits */ +#define DW_UART_LCR_EXT_DLS_E BIT(0) +#define DW_UART_LCR_EXT_ADDR_MATCH BIT(1) +#define DW_UART_LCR_EXT_SEND_ADDR BIT(2) +#define DW_UART_LCR_EXT_TRANSMIT_MODE BIT(3) + +/* Component Parameter Register bits */ +#define DW_UART_CPR_ABP_DATA_WIDTH GENMASK(1, 0) +#define DW_UART_CPR_AFCE_MODE BIT(4) +#define DW_UART_CPR_THRE_MODE BIT(5) +#define DW_UART_CPR_SIR_MODE BIT(6) +#define DW_UART_CPR_SIR_LP_MODE BIT(7) +#define DW_UART_CPR_ADDITIONAL_FEATURES BIT(8) +#define DW_UART_CPR_FIFO_ACCESS BIT(9) +#define DW_UART_CPR_FIFO_STAT BIT(10) +#define DW_UART_CPR_SHADOW BIT(11) +#define DW_UART_CPR_ENCODED_PARMS BIT(12) +#define DW_UART_CPR_DMA_EXTRA BIT(13) +#define DW_UART_CPR_FIFO_MODE GENMASK(23, 16) + +/* Helpers for FIFO size calculation */ +#define DW_UART_CPR_FIFO_SIZE(a) (FIELD_GET(DW_UART_CPR_FIFO_MODE, (a)) * 16) +#define DW_UART_CPR_FIFO_MODE_FROM_SIZE(size) \ + (FIELD_PREP_CONST(DW_UART_CPR_FIFO_MODE, \ + BUILD_BUG_ON_ZERO((size) > 2048) + \ + BUILD_BUG_ON_ZERO((size) % 16) + \ + ((size) / 16))) + struct dw8250_port_data { /* Port properties */ int line; @@ -38,3 +109,5 @@ static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg) else writel(reg, p->membase + offset); } + +#endif /* _SERIAL_8250_DWLIB_H_ */