Apply for OSHWA certification

[amcewen]

Ideally during Open Hardware Month 😁

[huffeec]

In the same vein as the others although most is duplicated..

Following the process from My Baby's got LED applying at https://application.oshwa.org/apply

Notes

• I've described the three strip variant, the two strip models aren't currently in the repo. So we have the option of applying separately if we decide to.

• We need to make progress on Document the different parts of the repo #2 to support the application

• While writing this I spotted a typo on the catalogue page, '50mm should be '50cm' https://mcqn.com/ibal251/

• @huffeec Draft

• @amcewen updated/approved

• @huffeec Applied

BASIC INFORMATION
SECTION 1 OF 4
This part of the form asks for basic information about the responsible party for the project to be certified, such as the name of the individual, company, or organization certifying the project and contact information for any future correspondence from OSHWA regarding your certification.

This certification is on behalf of a: Company
Name of Individual, Company, or Organization Responsible for the Certified Item: MCQN Ltd
If not an Individual, name of Individual with Authority to Bind the Company or Organization: Adrian McEwen

Contact Information
Country: United Kingdom
Street Address Line 1: DoES Liverpool, The Tapestry
Street Address Line 2: 68-76 Kempston Street
City/town/village: Liverpool
State/Province/Region: Merseyside
Zip code/postal code: L3 8HL
OSHWA Contact Email Address: redacted
Public contact email address: info@mcqn.com

PROJECT INFORMATION
SECTION 2 OF 4
This part of the form asks for information about the project you wish to certify. Information submitted here will appear on your project’s profile listing.

Project name: Lightbeam
Project version: V1.0??
Have you previously registered a version(s) of your project with OSHWA? No
Project description: Lightbeam is an interactive light-up bollard with three strips of addressable leds inside a frosted polycarbonate tube. It was initially designed to be used in children's cycling games, connecting to microbits via bluetooth, but will work anywhere interactive addressable leds are needed. Alongside a My Bike's got LED board the design includes 3d printed components to transform 50mm tube into a Lightbeam What else does it need here?

Project website: mcqn.com/ibal251
Primary Project Type: IOT
Additional Project Types: Arts, Electronics, Education
Project Keywords: WLED, MQTT

Where can the documentation be found for your project?: https://github.com/mcqn/lightbeam

• All project documentation and design files are available in the preferred format for making changes.

Does your project incorporate or build upon other open projects that are not currently certified by OSHWA? If so, use this space to cite those projects Yes

Citation Title	Citation URL
WLED	https://github.com/Aircoookie/WLED

LICENSING INFORMATION
SECTION 3 OF 4

This part of the form asks for information about your project’s
licensing. In order to qualify for OSHWA certification, you must have
chosen an open source license for your hardware, your software (if any),
and your documentation. Your licenses for each of these elements will
appear on your project’s profile listing.
What license is your project's hardware licensed under? CERN
What license is your project's software licensed under? MIT
What license is your project's documentation licensed under? CC BY-SA

Statement	Response	Explanation
The project is licensed in a way to allow for modifications and derivative works without commercial restriction.	Yes
There is no restriction within my control to selling or giving away the project documentation.	Yes
Where possible, I have chosen to use components in my hardware that are openly licensed.	Yes
I understand and comply with the "Creator Contribution requirement," explained in the Requirements for Certification.	Yes
There is no restriction on the use by persons or groups, or by the field of endeavor.	Yes
The rights granted by any license on the project applies to all whom the work is redistributed to.	Yes
The rights granted under any license on the project do not depend on the licensed work being part of a specific product.	Yes
The rights granted under any license on the project do not restrict other hardware or software, for example by requiring that all other hardware or software sold with the item be open source.	No	The WLED software uses a MIT licence and can be used in other non-open projects, but the hardware is restricted under the CERN Open Hardware Licence Version 2 - Strongly Reciprocal.
The rights granted under any license on the project are technology neutral.	Yes

CERTIFICATION
SECTION 4 OF 4
This part of the form asks you to certify that you agree to specific terms of the OSHWA Certification Mark License Agreement.

You agree to the following terms:

I have provided OSHWA with accurate contact information, recognize that all official communications from OSHWA will be directed to that contact information, and will update that contact information as necessary.
I will only use the certification mark in compliance with official certification guidelines.
I acknowledge that all right, title, and interest in the certification mark remains with OSHWA.
I acknowledge that OSHWA has the right to enforce violations of the use of the mark. This enforcement may involve financial penalties for misuse in bad faith.
I have the ability to bind those responsible for the certified item to this agreement.

If you do not agree with any of the above terms, please explain.
Provide a brief explanation (500 characters)
Relationship to certified item: I am the primary developer of the certified item, as well as a manufacturer and retailer of the item as a commercial product.

I agree to the terms of the OSHWA Open Source Hardware Certification Mark License Agreement, including the Requirements for Certification and Usage Guidelines incorporated by reference and including license terms that are not present in or conflict with this web form. I acknowledge that by agreeing to the terms of the OSHWA Open Source Hardware Certification Mark License Agreement that I am binding the entity listed to the License Agreement. I recognize that I will receive my unique identification number that allows me to promote my project as OSHWA Open Source Hardware Certified in compliance with the user guidelines via the email provided to OSHWA after submitting this form.

If you are the parent or legal guardian entering into this agreement on behalf of an individual under the age of 18, please provide your name to certify that you also agree to be bound by this agreement.: Not applicable.

[huffeec]

Submitted.