pause_code.txt

M300
G0 F9500 X0 Y0 Z50
M0 ; Pause
G92 E0 ; Reset Extruder
G28 ; Home all axes
; temp change
G0 Z50.0 F9500 ; Move Z Axis up little to prevent scratching of Heat Bed
G0 X0.1 Y20 Z50.0 F5000.0
G0 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y30.0 Z0.3 F1000.0 E15 ; Draw the first line
G1 X0.4 Y30.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1000.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z50 F9500 ; Move over to prevent blob squish
;M83 ;relative extrusion mode