From 379e69424157fabf55d267cc985f97c1334a1770 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:37:41 +0200
Subject: [PATCH 001/303] New translations aapsscreens.md (Romanian)
---
.../ro/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/ro/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/ro/DailyLifeWithAaps/AapsScreens.md
index 12dc58955620..468e16a3671d 100644
--- a/docs/CROWDIN/ro/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/ro/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ It is based on the expected drop in BG of the insulin in your system if no other
You can activate up to four additional graphs below the main graph. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### Calculator
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Calibrations
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Acțiuni - secțiunea M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Button to start or cancel a temporary basal rate. Please note that the button changes from “TEMPBASAL” to “CANCEL x%” when a temporary basal rate is set.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* This option is only available for Dana RS and Insight pumps.
* Closed loop will automatically be stopped and switched to open loop mode for the time running extended bolus.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Careportal - section N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Careportal - section O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Prime/Fill allows you to record pump site and insulin cartridge change.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## History Browser
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From 7b46370e1d19c644e64c5f8dc08a4d60f590e38c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:37:45 +0200
Subject: [PATCH 002/303] New translations keyaapsfeatures.md (Romanian)
---
docs/CROWDIN/ro/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/ro/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/ro/DailyLifeWithAaps/KeyAapsFeatures.md
index 94fe8ed46ca6..e822f25e0a09 100644
--- a/docs/CROWDIN/ro/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/ro/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ For example, if the highest basal rate in your profile was 0.5 U/h you could mul
- Insulin-resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. It is different for ever
- Insulin resistant adult: 25
- Pregnant: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ If you have this option enabled, the insulin sensitivity will be decreased while
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). It will try and figure out how sensitive/resistant you are based on these deviations and adjust basal rate and ISF based on these deviations.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Insulin resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Maximum basal IOB OpenAPS can deliver \[U\] (OpenAPS "max-iob")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Insulin resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Enable AMA Autosens
From e79727384a17ddd0006615a5ab39dd719ecc14c9 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:40:11 +0200
Subject: [PATCH 003/303] New translations compatiblepumps.md (French)
---
docs/CROWDIN/fr/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/fr/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/fr/Getting-Started/CompatiblePumps.md
index 1b9b91008ea6..031ada73018b 100644
--- a/docs/CROWDIN/fr/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/fr/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS fonctionne avec un certain nombre de pompes à insuline. The following lis
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From 43161752780af3461a5dab9bcb43b284f55bf124 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:40:13 +0200
Subject: [PATCH 004/303] New translations compatiblescgms.md (French)
---
docs/CROWDIN/fr/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/fr/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/fr/Getting-Started/CompatiblesCgms.md
index d194522bf35d..8c222e5c0811 100644
--- a/docs/CROWDIN/fr/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/fr/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| MGC | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| MGC | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From a25a78506b40ca1427f95b45246d58d6d5305002 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:41:19 +0200
Subject: [PATCH 005/303] New translations aapsscreens.md (Spanish)
---
.../es/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/es/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/es/DailyLifeWithAaps/AapsScreens.md
index 1c7628e576c1..16ef802b2980 100644
--- a/docs/CROWDIN/es/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/es/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ Se basa en la caída esperada de la glucosa en sangre por la insulina en tu cuer
Se pueden activar hasta cuatro gráficos adicionales debajo del gráfico principal. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### Calculadora
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Calibraciones
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Sección M - Acciones
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Botón iniciar o cancelar una tasa basal temporal. Hay que tener en cuenta que el botón cambia de "Basal temporal" a "Cancelar x%" cuando se establece una tasa basal temporal.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* Esta opción solo está disponible para las bombas de insulina Dana RS y Accu-Chek Insight.
* El lazo cerrado se detendrá automáticamente y cambiará a modo de lazo abierto, durante el tiempo que dure el bolo extendido.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Sección N - Portal de cuidados
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Sección O - Portal de cuidados
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
La opción de Cebar/Llenar permite registrar el cambio de lugar de la cánula y el cambio del cartucho de insulina.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## Historial
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From 13f8df7609470e216ffbdba36cbba04d43916f06 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:41:23 +0200
Subject: [PATCH 006/303] New translations keyaapsfeatures.md (Spanish)
---
docs/CROWDIN/es/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/es/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/es/DailyLifeWithAaps/KeyAapsFeatures.md
index c009a342b4f1..d060fbce6670 100644
--- a/docs/CROWDIN/es/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/es/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ For example, if the highest basal rate in your profile was 0.5 U/h you could mul
- Adultos resistente a la insulina: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. It is different for ever
- Adultos resistente a la insulina: 25
- Pregnant: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ If you have this option enabled, the insulin sensitivity will be decreased while
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). It will try and figure out how sensitive/resistant you are based on these deviations and adjust basal rate and ISF based on these deviations.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Adultos resistente a la insulina: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Maximum basal IOB OpenAPS can deliver \[U\] (OpenAPS "max-iob")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Adultos resistente a la insulina: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Enable AMA Autosens
From de0625684f0688982809059fc89b9a916563dcde Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:44:55 +0200
Subject: [PATCH 007/303] New translations diaconng8.md (Spanish)
---
docs/CROWDIN/es/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/es/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/es/CompatiblePumps/DiaconnG8.md
index f67e5b7a07ba..79eedcde1aa5 100644
--- a/docs/CROWDIN/es/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/es/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Extended Bolus function
- If you use extended bolus it will disable closed loop.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From 5ebf92d80210d10f0424ec4ee4dfda1936348035 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:45:00 +0200
Subject: [PATCH 008/303] New translations releasenotes.md (Spanish)
---
docs/CROWDIN/es/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/es/Maintenance/ReleaseNotes.md b/docs/CROWDIN/es/Maintenance/ReleaseNotes.md
index 4bd1bf89578d..c21fd847cc42 100644
--- a/docs/CROWDIN/es/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/es/Maintenance/ReleaseNotes.md
@@ -491,6 +491,8 @@ Fecha de lanzamiento: 23-01-2021
- NSClient fixes
- Bolus advisor now works with Pumpcontrol and NSClient
+(version-2811)=
+
## Versión 2.8.1.1
Fecha de lanzamiento: 12-01-2021
From f40982bdf28759bc834feebaf7da5e92a2f1d6e4 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:45:04 +0200
Subject: [PATCH 009/303] New translations automations.md (Spanish)
---
docs/CROWDIN/es/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/es/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/es/DailyLifeWithAaps/Automations.md
index 0aff3139aa6c..07593ff46162 100644
--- a/docs/CROWDIN/es/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/es/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From 13837ae48273cc3a4c1cd1f9d2883b1654de273c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:45:06 +0200
Subject: [PATCH 010/303] New translations extendedcarbs.md (Spanish)
---
docs/CROWDIN/es/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/es/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/es/DailyLifeWithAaps/ExtendedCarbs.md
index 7c0460ab1f0f..38a602b05118 100644
--- a/docs/CROWDIN/es/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/es/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ A scenario e.g. for a Pizza might be to give a (partial) bolus up front via the
**Important notes:** You'll need to try out and see which concrete values work for you of course. You might also carefully adjust the setting *max minutes of basal to limit SMB to* to make the algorithm more or less aggressive. Con comidas bajas en carbohidratos, altas en grasas y proteínas, puede ser suficiente usar solo eCarbs sin bolos manuales (consulte el post arriba mencionado). Cuando los eCarbs son generados, se genera una nota en el Careportal para documentar los inputs, para así hacer más fácil la iteración y mejorar los inputs.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Extended bolus and why they won't work in closed-loop environment?
Como se ha mencionado anteriormente, los bolos extendidos o de onda múltiple no funcionan realmente en un entorno de lazo cerrado. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ That's why as of version 2.6 there is an option for an extended bolus for users

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Why extended boluses won't work in a closed loop environment
1. El lazo determina que ahora se van a entregar 1.55U/h. Si se entrega como un bolus ampliado o TBR no importa al algoritmo. De hecho, algunas de las bombas utilizan el bolo extendido. ¿Qué debería pasar entonces? Most pump drivers then stop the extended bolus -> You didn't even need to start it.
From 24ea32ce3f08c4c3bcfa2c353fbb7c66184abbad Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:45:45 +0200
Subject: [PATCH 011/303] New translations omnipoderos.md (Spanish)
---
.../CROWDIN/es/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/es/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/es/CompatiblePumps/OmnipodEros.md
index 70415349fd2a..215f42f27d5c 100644
--- a/docs/CROWDIN/es/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/es/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ On the **RileyLink Selection** screen press the **Scan** button and select your
Press the **Next** button to proceed with the rest of the **Setup Wizard.** It can take up to one minute for the selected RileyLink to initialize and the **Next** button to become active.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**OR**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via the top-left hand corner **hamburger menu** under **Config Builder (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. Selecting the **checkbox (4)** next to the **Settings Gear (3)** will display the Omnipod menu as a tab in the AAPS interface titled **POD**. This is referred to in this documentation as the **Omnipod (POD)** tab.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Please **swipe left** to the **Omnipod (POD)** tab where you will be able to man
### RileyLink Setup
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Note: A good visual indicator that the RileyLink is not connected is that the Insulin and Calculator buttons on the HOME tab will be missing. This will also occur for about the first 30 seconds after AAPS starts, as it is actively connecting to the RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. After selecting the Omnipod driver, identify and select your RileyLink from **Config Builder (1)** ➜**Pump**➜**Omnipod**➜**Gear Icon (Settings) (2)** ➜**RileyLink Configuration (3)** by pressing the **Not Set** or **MAC Address (if present)** text.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Before you can activate a pod please ensure you have properly configured and connected your RileyLink connection in the Omnipod settings
-*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigate to the **Omnipod (POD)** tab and click on the **POD MGMT (1)** button, and then click on **Activate Pod (2)**.
@@ -143,7 +143,7 @@ Before you can activate a pod please ensure you have properly configured and con
>
> Ensure the new pod and RileyLink are within close proximity of each other (~30cm or less) and click the **Next** button.
-03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Before you can activate a pod please ensure you have properly configured and con
Click on the back button on your phone to return to the **Omnipod (POD)** tab screen which will now display Pod information for your active pod session, including current basal rate, pod reservoir level, insulin delivered, pod errors and alerts.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
The process below will show you how to suspend and resume insulin pump delivery.
-*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspending Insulin Delivery
@@ -433,7 +433,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
- **Total delivered:** Displays the total number of units of insulin delivered from the reservoir. *Note this is an approximation as priming and filling the pod is not an exact process.*
-- **Errors:** Displays the last error encountered. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Errors:** Displays the last error encountered. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Active pod alerts:** Reserved for currently running alerts on the active pod. Normally used when pod expiration is past 72 hours and native pod beep alerts are running.
@@ -447,7 +447,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
>
> Use to refresh the pod status and dismiss status fields that contain the text (uncertain).
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From a31daf4907e566c33682a658d30caedfde220804 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:46:01 +0200
Subject: [PATCH 012/303] New translations introduction.md (Spanish)
---
docs/CROWDIN/es/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/es/Getting-Started/Introduction.md b/docs/CROWDIN/es/Getting-Started/Introduction.md
index 926b3cc6d000..27c74ef05707 100644
--- a/docs/CROWDIN/es/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/es/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ La tabla anterior supone que el usuario tiene acceso tanto a un monitor continuo
*All data from **AAPS** can be made available to healthcare professionals via data sharing platforms, including Nightscout that provides logging and real time monitoring of CGM data, insulin delivery, carbohydrate entries, predictions and settings. Los registros de Nightscout incluyen informes diarios y semanales que pueden ayudar a los profesionales de la salud en sus conversaciones con pacientes con diabetes tipo 1 al proporcionar datos más precisos sobre el control glucémico y consideraciones conductuales.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibility for users AAPS who are partially or completely blind
#### Day to day AAPS use:
From 5b0a542b5594984af34f4063e517828b2a18acde Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:46:02 +0200
Subject: [PATCH 013/303] New translations preparingforaaps.md (Spanish)
---
docs/CROWDIN/es/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/es/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/es/Getting-Started/PreparingForAaps.md
index 6857bcb16d95..d991cc20527c 100644
--- a/docs/CROWDIN/es/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/es/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ To aid the build process there are dedicated sections:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore & configuration settings export file
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Medical considerations
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulin choice
From 7ed777b08fe894c630fd469515831ff078d718da Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:48:36 +0200
Subject: [PATCH 014/303] New translations compatiblepumps.md (Spanish)
---
docs/CROWDIN/es/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/es/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/es/Getting-Started/CompatiblePumps.md
index 5dd27835c82c..a59ba099938e 100644
--- a/docs/CROWDIN/es/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/es/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From 49fa3ec7058ebe38742c697b35d889d5324c6e05 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:48:37 +0200
Subject: [PATCH 015/303] New translations compatiblescgms.md (Spanish)
---
docs/CROWDIN/es/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/es/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/es/Getting-Started/CompatiblesCgms.md
index 5ba123a2ea49..09bf2b814304 100644
--- a/docs/CROWDIN/es/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/es/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| MCG | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| MCG | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From 751be723edf9885aee4a21522f6e9b2ffe16b9fb Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:49:41 +0200
Subject: [PATCH 016/303] New translations aapsscreens.md (Czech)
---
.../cs/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/cs/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/cs/DailyLifeWithAaps/AapsScreens.md
index 46a50244c492..24153f3e951a 100644
--- a/docs/CROWDIN/cs/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/cs/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ Je založena na očekávaném poklesu glykémie odpovídajícímu množství inz
Můžete aktivovat až čtyři další grafy pod hlavním grafem. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### Kalkulačka
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Kalibrace
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Actions - section M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Button to start or cancel a temporary basal rate. Please note that the button changes from “TEMPBASAL” to “CANCEL x%” when a temporary basal rate is set.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* This option is only available for Dana RS and Insight pumps.
* Closed loop will automatically be stopped and switched to open loop mode for the time running extended bolus.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Careportal - section N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Careportal - section O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Prime/Fill allows you to record pump site and insulin cartridge change.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## History Browser
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From d82a2b40a248ddd9770daca89ea017d772be1826 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:49:45 +0200
Subject: [PATCH 017/303] New translations keyaapsfeatures.md (Czech)
---
docs/CROWDIN/cs/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/cs/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/cs/DailyLifeWithAaps/KeyAapsFeatures.md
index 447ec24fac7c..5315cb9e9f6d 100644
--- a/docs/CROWDIN/cs/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/cs/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ Například: máte-li ve svém profilu nejvyšší hodnotu bazálu 0.5U/h, dosta
- Dospělí s vyšší rezistencí na inzulín: 12
- Těhotná: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. It is different for ever
- Dospělí s vyšší rezistencí na inzulín: 25
- Těhotná: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ Je-li tato volba aktivní, citlivost na inzulin se při nastavení dočasného c
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). Pokud je chcete i přesto změnit, prostudujte si podrobnosti v , abyste pochopili, co děláte.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Dospělí s vyšší rezistencí na inzulín: 12
- Těhotná: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Maximum basal IOB OpenAPS can deliver \[U\] (OpenAPS "max-iob")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Dospělí s vyšší rezistencí na inzulín: 12
- Těhotná: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Povolit AMA Autosense
From c78f50303db325c7fea614cfcd141e91a3d3a87d Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:53:43 +0200
Subject: [PATCH 018/303] New translations diaconng8.md (Czech)
---
docs/CROWDIN/cs/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/cs/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/cs/CompatiblePumps/DiaconnG8.md
index eeddc7fc4b48..d81b12b090f7 100644
--- a/docs/CROWDIN/cs/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/cs/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Funkce prodlouženého bolusu
- Pokud použijete prodloužený bolus, deaktivuje se uzavřená smyčka.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From 5c2f2203c7f63abbb32ae70c7d9210d0ca056944 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:53:48 +0200
Subject: [PATCH 019/303] New translations releasenotes.md (Czech)
---
docs/CROWDIN/cs/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/cs/Maintenance/ReleaseNotes.md b/docs/CROWDIN/cs/Maintenance/ReleaseNotes.md
index 302043e1d300..8a72b89d0039 100644
--- a/docs/CROWDIN/cs/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/cs/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Release date: 23-01-2021
- opravy NSClienta
- Poradce s bolusem nyní pracuje s ovládáním pumpy a NSClientem
+(version-2811)=
+
## Version 2.8.1.1
Release date: 12-01-2021
From 4e847d541c5b508ab9d23cea7fa2bd4bd0004edc Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:53:51 +0200
Subject: [PATCH 020/303] New translations automations.md (Czech)
---
docs/CROWDIN/cs/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/cs/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/cs/DailyLifeWithAaps/Automations.md
index d277c4144991..c99eae258fcb 100644
--- a/docs/CROWDIN/cs/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/cs/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From 9453285d099ccc9a51a022bfb07a1c66b4f8b493 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:53:54 +0200
Subject: [PATCH 021/303] New translations extendedcarbs.md (Czech)
---
docs/CROWDIN/cs/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/cs/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/cs/DailyLifeWithAaps/ExtendedCarbs.md
index be4b3a6484d4..a509f33ce2ba 100644
--- a/docs/CROWDIN/cs/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/cs/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ Doporučené nastavení je použít OpenAPS SMB APS plugin a také s povoleným
**Important notes:** You'll need to try out and see which concrete values work for you of course. Možná také opatrně upravit nastavení *Maximální počet minut bazálu, ke kterým se limituje SMB*, aby byl algoritmus více či méně agresivní. Pro jídla s nízkým obsahem sacharidů a s vysokým obsahem tuků/bílkovin může být dostačující použít jenom eSacharidy bez ručních bolusů (viz blogový příspěvek výše). Když jsou eSacharidy generovány, je také založena poznámka do ošetření, aby byly všechny uživatelské zásahy zdokumentované, aby bylo snazší opakovat a vylepšovat své postupy.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Extended bolus and why they won't work in closed-loop environment?
As mentioned above extended or multiwave boluses do not really work in a closed loop environment. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ That's why as of version 2.6 there is an option for an extended bolus for users

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Why extended boluses won't work in a closed loop environment
1. The loop determines that now 1.55U/h is to be delivered. Whether this is delivered as an extended bolus or TBR does not matter to the algorithm. In fact, some of the pumps use the extended bolus. What should happen then? Most pump drivers then stop the extended bolus -> You didn't even need to start it.
From 710bf202604ee3fddc55d5d9b582bace1d453d93 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:54:34 +0200
Subject: [PATCH 022/303] New translations omnipoderos.md (Czech)
---
.../CROWDIN/cs/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/cs/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/cs/CompatiblePumps/OmnipodEros.md
index 74f189578ba4..0fa02f48734c 100644
--- a/docs/CROWDIN/cs/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/cs/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ On the **RileyLink Selection** screen press the **Scan** button and select your
Stiskněte tlačítko **Další**, abyste pokračovali dál **Průvodcem nastavení.** Může trvat až minutu, než tento krok proběhne, probíhá inicializace RilyLinku a tlačítko **Další** bude po tuto dobu neaktivní.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**NEBO**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via the top-left hand corner **hamburger menu** under **Config Builder (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. Selecting the **checkbox (4)** next to the **Settings Gear (3)** will display the Omnipod menu as a tab in the AAPS interface titled **POD**. This is referred to in this documentation as the **Omnipod (POD)** tab.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Please **swipe left** to the **Omnipod (POD)** tab where you will be able to man
### Nastavení RileyLinku
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Note: A good visual indicator that the RileyLink is not connected is that the Insulin and Calculator buttons on the HOME tab will be missing. This will also occur for about the first 30 seconds after AAPS starts, as it is actively connecting to the RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. After selecting the Omnipod driver, identify and select your RileyLink from **Config Builder (1)** ➜**Pump**➜**Omnipod**➜**Gear Icon (Settings) (2)** ➜**RileyLink Configuration (3)** by pressing the **Not Set** or **MAC Address (if present)** text.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Before you can activate a pod please ensure you have properly configured and connected your RileyLink connection in the Omnipod settings
-*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigate to the **Omnipod (POD)** tab and click on the **POD MGMT (1)** button, and then click on **Activate Pod (2)**.
@@ -143,7 +143,7 @@ Before you can activate a pod please ensure you have properly configured and con
>
> Ensure the new pod and RileyLink are within close proximity of each other (~30cm or less) and click the **Next** button.
-03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Before you can activate a pod please ensure you have properly configured and con
Click on the back button on your phone to return to the **Omnipod (POD)** tab screen which will now display Pod information for your active pod session, including current basal rate, pod reservoir level, insulin delivered, pod errors and alerts.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
The process below will show you how to suspend and resume insulin pump delivery.
-*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspending Insulin Delivery
@@ -433,7 +433,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
- **Total delivered:** Displays the total number of units of insulin delivered from the reservoir. *Note this is an approximation as priming and filling the pod is not an exact process.*
-- **Errors:** Displays the last error encountered. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Errors:** Displays the last error encountered. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Active pod alerts:** Reserved for currently running alerts on the active pod. Normally used when pod expiration is past 72 hours and native pod beep alerts are running.
@@ -447,7 +447,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
>
> Use to refresh the pod status and dismiss status fields that contain the text (uncertain).
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From d0298980a0716387aa397ca100a0061a25b7181e Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:54:49 +0200
Subject: [PATCH 023/303] New translations introduction.md (Czech)
---
docs/CROWDIN/cs/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/cs/Getting-Started/Introduction.md b/docs/CROWDIN/cs/Getting-Started/Introduction.md
index 271998f3be67..1801f5725827 100644
--- a/docs/CROWDIN/cs/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/cs/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ Výše uvedená tabulka předpokládá, že uživatel má přístup k nepřetrž
Veškerá data z **AAPS** mohou být k dispozici zdravotnickým pracovníkům prostřednictvím platforem pro jejich sdílení, včetně NightScout, který umožňuje zaznamenávat a v reálném čase sledovat CGM data, dávkování inzulínu, záznamenané sacharidy, předpovědi a nastavení. Záznamy z Nightscoutu obsahují také denní a týdenní reporty, které mohou zdravotnickým pracovníkům pomoci při diskusích s diabetiky I. typu přesnějšími údaji o tom, jak mají glykémii pod kontrolou a o jejich návycích.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Dostupnost pro uživatele AAPS, kteří jsou částečně nebo zcela nevidomí
#### Každodenní použití AAPS:
From e33424b7ac703dbc33d067a7144d44d5ebcec1b4 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:54:50 +0200
Subject: [PATCH 024/303] New translations preparingforaaps.md (Czech)
---
docs/CROWDIN/cs/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/cs/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/cs/Getting-Started/PreparingForAaps.md
index 22a67e75a5ae..68b5e7a1d472 100644
--- a/docs/CROWDIN/cs/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/cs/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ Pro podporu procesu sestavení aplikace jsou vyčleněny tyto oddíly dokumentac
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Úložiště klíčů a konfigurace exportu nastavených hodnot
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Lékařská hlediska
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Výběr inzulínu
From 1a6eeeb9076334174430825c8e44a8b4d721855a Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:57:20 +0200
Subject: [PATCH 025/303] New translations compatiblepumps.md (Czech)
---
docs/CROWDIN/cs/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/cs/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/cs/Getting-Started/CompatiblePumps.md
index 5dd27835c82c..a59ba099938e 100644
--- a/docs/CROWDIN/cs/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/cs/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From 0d50cfe423bb8db9eb36e1a04897f8d5703dd830 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:57:22 +0200
Subject: [PATCH 026/303] New translations compatiblescgms.md (Czech)
---
docs/CROWDIN/cs/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/cs/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/cs/Getting-Started/CompatiblesCgms.md
index f860f17b17ae..e531d8a1dd56 100644
--- a/docs/CROWDIN/cs/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/cs/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| CGM | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From a0317ed29bf1136ae617794339f23120e8376d15 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:58:25 +0200
Subject: [PATCH 027/303] New translations aapsscreens.md (German)
---
.../de/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/de/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/de/DailyLifeWithAaps/AapsScreens.md
index ca0176f0ee05..206baab02415 100644
--- a/docs/CROWDIN/de/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/de/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ Wenn Du **AAPS** öffnest, ist dies die erste Ansicht. Sie enthält die meisten
* Alternativ kannst Du die Bildschirme wechseln, indem Du nach links oder rechts wischst.
* Die anzuzeigenden Reiter können in der [Konfiguration](#Config-Builder-tab-or-hamburger-menu) ausgewählt werden.
+(aaps-screens-profile--target)=
+
### Abschnitt B - Profil & Ziel
#### Aktuelles Profil
@@ -295,7 +297,7 @@ Sie basiert auf dem erwarteten Rückgang des BZ gemäß aktivem Insulin. Weitere
Sie können bis zu vier zusätzliche Grafiken unterhalb der Hauptgrafik aktivieren. Wenn [Einfacher Modus](#preferences-simple-mode) aktiviert ist, sind zusätzliche Diagramme voreingestellt und können nicht verändert werden. Wenn Du eine eigene Konfiguration in den zusätzlichen Diagrammen nutzen möchtest, deaktiviere zuerst den **Einfachen Modus**.
-Um die Einstellungen für weitere Diagramme zu öffnen, klicke auf der rechten Seite des [Hauptdiagramms](#section-f---main-graph) auf das Dreieck und scrolle nach unten.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ Zur Nutzung der Schaltflächen Insulin, Kohlenhydrate und Rechner: Du kannst, we

-Um einen Bolus abzugeben, ohne den [Bolus-Rechner](#bolus-wizard) zu nutzen.
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
Durch Anhaken des Kästchens **Starte Essens-TT**, kannst Du automatisch Dein [temporäres Ziel „Bald essen“](#TempTargets-eating-soon-temp-target) starten.
@@ -406,7 +408,7 @@ Mit den Buttons kannst Du schnell die Kohlenhydratmengen erhöhen. Die Schrittwe
#### Bolus-Rechner
-Siehe Bolus-Rechner im [Abschnitt unten](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Kalibrierungen
@@ -503,18 +505,20 @@ Für mehr Details, schaue bitte in den Hinweisen auf der Seite [Berechnung der a
### Aktionen - Abschnitt M
-Schaltfläche **[Profilwechsel](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** als Alternative zum Drücken des [aktuellen Profils](#section-b---profile--target) auf dem Startbildschirm.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Schaltfläche **[Temporäres Ziel](../DailyLifeWithAaps/TempTargets.md)** als Alternative zum Drücken des [aktuellen Ziels](#section-b---profile--target) auf dem Startbildschirm.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Button zum Starten oder Abbrechen einer temporären Basalrate. Beachte, dass sich die Bezeichnung der Schaltfläche von "TBR" zu "Abbrechen X%" ändert, wenn eine temporäre Basalrate abgegeben wird.
-Auch wenn [verzögerte Boli](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) im Closed Loop nicht wirklich funktionieren, haben einige Nutzer nach einer Option gefragt, um verzögerte Boli dennoch verwenden zu können.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* Diese Option ist nur für Dana RS und Insight Pumpen verfügbar.
* Der Closed Loop wird automatisch gestoppt und für die Laufzeit des verzögerten Bolus zum Open Loop gewechselt.
* Bitte lies, bevor Du die Option nutzt, die [Details](../DailyLifeWithAaps/ExtendedCarbs.md) dazu durch.
+(aaps-screens-careportal)=
+
### Careporal - Abschnitt N
Zeigt Informationen zu:
@@ -536,7 +540,7 @@ Schwellenwerte können in [Einstellungen > Übersicht > Statusanzeige](#Preferen
### Careporal - Abschnitt O
-BZ-Test, Katheterwechsel, CGM-Sensor gesetzt, Pumpenbatterie-Wechsel sind die Basis für die in [Abschnitt N](#careportal---section-n) angezeigten Daten.
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Mit dem Button 'Katheterwechsel' kannst Du sowohl einen Katheter- (Schlauch) als auch einen Kanülenwechsel (Nadel) aufzeichnen.
@@ -647,7 +651,7 @@ Auf diesem Reiter kannst Du die Bolus- und Kohlenhydrateingaben einsehen. Jeder
* Mahlzeit (manuell über die Schaltflächen Insulin, Schnellassistent oder Bolus-Rechner eingegeben)
* SMB, wenn die SMB-Funktionalität verwendet wird
-Die Kohlenhydrate (Zeile **2**) werden nur in Nightscout gespeichert. Wenn Du den [Bolus-Rechner](#bolus-wizard) benutzt hast, um die Insulindosis zu berechnen, kannst Du auf den Text „Berechnung“ (Zeile **3**) drücken, um die Details zur Bolusberechnung anzuzeigen.
+Die Kohlenhydrate (Zeile **2**) werden nur in Nightscout gespeichert. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Abhängig von der gewählten Pumpe werden Insulin und Kohlenhydrate in einer oder mehreren Zeilen angezeigt: eine Zeile für die Berechnungsdetails, eine für die Kohlenhydrate und eine für den eigentlichen Bolus.
@@ -702,7 +706,7 @@ Auf dieser Registerkarte werden alle Notizen und Alarme angezeigt, die von Night
## Historie
-Diese Ansicht kann durch Drücken auf die drei Punkte oben rechts im Menü und Auswahl der Historie aufgerufen werden. Es kann nicht über die Konfiguration im Hauptmenü sichtbar gemacht werden. Du kommst auch über eine Schaltfläche am unteren Rand des [Aktionen-Reiters](#action-tab) dort hin.
+Diese Ansicht kann durch Drücken auf die drei Punkte oben rechts im Menü und Auswahl der Historie aufgerufen werden. Es kann nicht über die Konfiguration im Hauptmenü sichtbar gemacht werden. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Zeigt die **AAPS**-Historie (d. h. die historischen Verläufe) an. Siehe dazu auch [Deine Daten reviewen > AAPS-Historie](../Maintenance/Reviewing.md).
From 347eb6150d7d4faa326928168964e98262b535a8 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 02:58:28 +0200
Subject: [PATCH 028/303] New translations keyaapsfeatures.md (German)
---
docs/CROWDIN/de/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/de/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/de/DailyLifeWithAaps/KeyAapsFeatures.md
index 7ee901ced535..91a8051c991e 100644
--- a/docs/CROWDIN/de/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/de/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ Wenn zum Beispiel die höchste Basalrate in deinem Profil 0.5IE/h war, kannst du
- Insulinresistenter Erwachsener: 12
- Schwangere: 25
-*Siehe auch [Übersicht der fest programmierten Limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Sei bei der Anpassung des **max-IOB** vorsichtig. Das ist sehr individuell und h
- Insulinresistenter Erwachsener: 25
- Schwangere: 40
-*Siehe auch [Übersicht der fest programmierten Limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Hinweis: Bei der Verwendung von **SMB** wird **max-IOB** anders berechnet als in AMA. In **AMA** ist maxIOB ein Sicherheitsparameter für das Basal-**IOB**, während im SMB-Modus auch Bolus-IOB enthalten ist.
@@ -117,7 +117,7 @@ Wenn du diese Option aktivierst, dann wird die Insulinempfindlichkeit verringert
### Nutze Autosens
-Das ist die [Autosens](#autosens)-Funktion. Autosens kann nicht gleichzeitig mit dem dynamischen ISF genutzt werden. Der Grund dafür ist, dass die beiden unterschiedlichen Algorithmen die gleichen Variablen zur Empfindlichkeit verändern würden.
+This is the [Autosens](#Open-APS-features-autosens) feature. Autosens kann nicht gleichzeitig mit dem dynamischen ISF genutzt werden. Der Grund dafür ist, dass die beiden unterschiedlichen Algorithmen die gleichen Variablen zur Empfindlichkeit verändern würden.
Autosens analysiert Deine Glukosewert-Abweichungen (positiv/negativ/neutral). Dabei wird anhand dieser Abweichungen ermittelt, wie empfindlich / resistent Du auf Insulin reagierst und Deine Basalrate und den ISF entsprechend angepasst.
@@ -268,7 +268,7 @@ Die in **AAPS** fest hinterlegten Parameter sind:
- Insulinresistenter Erwachsener: 12
- Schwangere: 25
-*Siehe auch [Übersicht der fest programmierten Limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Maximales Basal-IOB, das OpenAPS abgeben darf \[IE\] (OpenAPS “max-iob”)
@@ -282,7 +282,7 @@ Der Standardwert ist 2, aber Du solltest diesen Parameter in kleinen Schritten e
- Insulinresistenter Erwachsener: 12
- Schwangere: 25
-*Siehe auch [Übersicht der fest programmierten Limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Verwende AMA Autosense
From 16e2b048eebd7a87b7f9ab366f3907ea369b941d Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:02:14 +0200
Subject: [PATCH 029/303] New translations diaconng8.md (German)
---
docs/CROWDIN/de/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/de/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/de/CompatiblePumps/DiaconnG8.md
index b756ca3124de..f37544afead7 100644
--- a/docs/CROWDIN/de/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/de/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Funktion verzögerter Bolus
- Wenn Du einen verzögerten Bolus verwendest, wird der "Closed Loop"-Modus deaktiviert.
-- [Diese Seite](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) erklärt die Details, warum der Extended-Bolus in einem Closed-Loop-Umfeld nicht funktioniert.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From a561a56c0ef833155834cbc91bc0396bcca5ffa6 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:02:20 +0200
Subject: [PATCH 030/303] New translations automations.md (German)
---
docs/CROWDIN/de/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/de/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/de/DailyLifeWithAaps/Automations.md
index 5e2d6e2c7107..957d53325351 100644
--- a/docs/CROWDIN/de/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/de/DailyLifeWithAaps/Automations.md
@@ -270,6 +270,8 @@ Der Screenshot zeigt die detaillierten Auslöser der **Automatisierung**:

+(automating-preference-settings-export)=
+
## Automatischer Export der Einstellungen
### Täglicher automatischer Export der Einstellungen
From fa8ed4991c756d0c8931a7bb636b92526ca7961c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:02:23 +0200
Subject: [PATCH 031/303] New translations extendedcarbs.md (German)
---
docs/CROWDIN/de/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/de/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/de/DailyLifeWithAaps/ExtendedCarbs.md
index 67c639b35320..2fe3a1d76a77 100644
--- a/docs/CROWDIN/de/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/de/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ für eine Pizza wäre, einen anfänglichen (Teil-)Bolus über den *Rechner* zu g
**Wichtiger Hinweis:** Du musst natürlich ausprobieren und sehen, welche konkreten Werte für dich funktionieren. Du könntest auch die Einstellung *SMB-Basal-Limit in Minuten* vorsichtig anpassen, um den Algorithmus mehr oder weniger aggressiv zu einzustellen. Bei Low-Carb-Ernährung und fett-/eiweißreichen Mahlzeiten reicht es möglicherweise aus, nur eCarbs ohne manuellem Mahlzeitenbolus einzugeben (mehr dazu im Blogbeitrag oben). Wenn eCarbs eingegeben werden, wird im Careportal automatisch eine Notiz angelegt, damit es einfacher ist, die Eingaben zu überprüfen und zu verbessern.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Verzögerter Bolus und warum dieser nicht mit Closed Loop funktioniert?
Wie oben bereits erwähnt sind verzögerte oder sog. Multi-Wave-Boli beim Loopen nicht sinnvoll. Details [findest Du unten](#why-extended-boluses-wont-work-in-a-closed-loop-environment).
@@ -53,7 +53,7 @@ Daher gibt es ab Version 2.6 für Nutzer der Dana- und Insight-Pumpe eine Option

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Warum ein verzögerter Bolus beim Loopen nicht funktioniert
1. Der Loop bestimmt, dass jetzt 1,55 IE/Std. abgegeben werden soll. Ob das als verzögerter Bolus oder TBR abgegeben wird, ist dem Algorithmus egal. In der Tat verwenden einige der Pumpen den verzögerten Bolus. Was soll dann geschehen? Die meisten Pumpentreiber stoppen dann den verzögerten Bolus -> Man brauchte ihn gar nicht erst starten.
From 5700af55c2db074b166541d50a82a52356c33554 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:03:01 +0200
Subject: [PATCH 032/303] New translations omnipoderos.md (German)
---
.../CROWDIN/de/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/de/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/de/CompatiblePumps/OmnipodEros.md
index 43d90ffecbfd..384c19918a86 100644
--- a/docs/CROWDIN/de/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/de/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ Drücke auf dem Bildschirm **RileyLink Auswahl** die **Scan-Schaltfläche (4)**
Drücke den **Weiter** Button, um mit dem Rest des **Setup-Assistenten fortzufahren.** Es kann bis zu einer Minute dauern, bis der gewählte RileyLink initialisiert wird und der **Weiter** Button aktiviert wird.
-Die Details zur Einrichtung des Pod-Kommunikationsgeräts finden sich weiter unten im Bereich [RileyLink Setup](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**ODER**
@@ -77,7 +77,7 @@ Die Details zur Einrichtung des Pod-Kommunikationsgeräts finden sich weiter unt
Über das **Hamburger Menü** oben links unter **Konfigurations-Assistent (1)** \ **Pumpe**\ **Omnipod** indem Du das **Auswahlfeld (2)** mit dem Titel **Omnipod** wählst. Wenn du das **Kontrollkästchen (4)** neben dem **Einstellungsrädchen (3)** wählst, wird das Omnipod-Menü als Registerkarte im AAPS-Interface mit dem Titel **POD** angezeigt. Dies wird in dieser Dokumentation als Registerkarte **Omnipod (POD)** bezeichnet.
-> **HINWEIS:** Eine schnellere Möglichkeit auf die **Omnipod-Einstellungen** zuzugreifen, findest Du unten in der Rubrik [Omnipod-Einstellungen](#omnipod-settings) dieses Dokuments.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Bitte **wische nach links** zur **Omnipod (POD)** Registerkarte, wo Du alle Pod
### RileyLink-Setup
-Wenn Du Deinen RileyLink bereits erfolgreich im Setup-Assistenten oder wie oben beschrieben verbunden hast, fahre mit dem Abschnitt [Aktivieren eines Pod](#activating-a-pod) fort.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Hinweis: Ein guter visueller Hinweis dafür, dass der RileyLink nicht angeschlossen ist, ist, dass die Tasten Insulin und Bolusrechner auf der Startseite fehlen. Dies passiert auch in den ersten 30 Sekunden nach dem Start von AAPS, da AAPS sich erst mit dem RileyLink verbinden muss.*
@@ -109,7 +109,7 @@ Wenn Du Deinen RileyLink bereits erfolgreich im Setup-Assistenten oder wie oben
2. Nach der Auswahl des Omnipod-Treibers identifiziere und wähle Deinen RileyLink im **Config Builder (1)** **Pumpe****Omnipod****Getriebesymbol (Einstellungen) (2)** **RileyLink Konfiguration (3)** indem Du die **Nicht setzen** oder **MAC-Adresse (falls vorhanden)** drückst.
- > Damit AAPS den RileyLink an seiner MAC-Adresse erkennen kann, stelle sicher, dass Dein RileyLink-Akku geladen ist und sich [in unmittelbarer Nähe Deines Smartphones befindet](#optimal-omnipod-and-rileylink-positioning) (näher als 30 cm). Einmal ausgewählt, kannst Du Deine erste Pod Session aktivieren. Benutze die Zurück-Taste auf Deinem Handy, um zum AAPS-Haupt-Bildschirm zurückzukehren.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Einmal ausgewählt, kannst Du Deine erste Pod Session aktivieren. Benutze die Zurück-Taste auf Deinem Handy, um zum AAPS-Haupt-Bildschirm zurückzukehren.
>
>  
@@ -131,7 +131,7 @@ Wenn Du Deinen RileyLink bereits erfolgreich im Setup-Assistenten oder wie oben
Bevor Du einen Pod aktivieren kannst, stelle sicher, dass Du Deine RileyLink-Verbindung in den Omnipod-Einstellungen richtig konfiguriert und verbunden hast
-*HINWEIS: Für die Verbindung mit dem Pod steht aus Sicherheitsgründen nur ein kleinerer Kommunikationsbereich zur Verfügung. Vor dem Pairing des Pods ist das Funksignal schwächer, aber nachdem es verbunden wurde, wird es mit voller Signalleistung funktionieren. Stelle sicher, dass Dein Pod während dieser Prozedur *[in unmittelbarer Nähe](#optimal-omnipod-and-rileylink-positioning) (näher als 30 cm) ist, aber nicht direkt auf oder neben dem RileyLink liegt.\*
+*HINWEIS: Für die Verbindung mit dem Pod steht aus Sicherheitsgründen nur ein kleinerer Kommunikationsbereich zur Verfügung. Vor dem Pairing des Pods ist das Funksignal schwächer, aber nachdem es verbunden wurde, wird es mit voller Signalleistung funktionieren. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigiere zur Registerkarte **Omnipod (POD)** und klicke auf den **POD MGMT (1)** Button und dann auf **Pod aktivieren (2)**.
@@ -143,7 +143,7 @@ Bevor Du einen Pod aktivieren kannst, stelle sicher, dass Du Deine RileyLink-Ver
>
> Stelle sicher, dass der neue Pod und RileyLink in der Nähe von einander liegen (~ 30cm oder weniger), und klicke auf den Button **Weiter**.
-03. Der Bildschirm **Initialisiere Pod** wird angezeigt und der Pod beginnt zu entlüften. (Du wirst ein Klicken hören, gefolgt von einer Reihe tickender Sounds, der Pod entlüftet sich selbst). Wenn RileyLink außerhalb des zulässigen Bereichs des aktiven Pods aktiviert wurde, erhälst Du eine Fehlermeldung **Keine Antwort von Pod**. Wenn dies geschieht, [hole den RileyLink näher ran](#optimal-omnipod-and-rileylink-positioning) (näher als 30 cm), lege ihn aber nicht auf die Oberseite oder direkt neben den Pod und klicke dann auf den Button **Erneut versuchen (1)**.
+03. Der Bildschirm **Initialisiere Pod** wird angezeigt und der Pod beginnt zu entlüften. (Du wirst ein Klicken hören, gefolgt von einer Reihe tickender Sounds, der Pod entlüftet sich selbst). Wenn RileyLink außerhalb des zulässigen Bereichs des aktiven Pods aktiviert wurde, erhälst Du eine Fehlermeldung **Keine Antwort von Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Bevor Du einen Pod aktivieren kannst, stelle sicher, dass Du Deine RileyLink-Ver
Klicke auf den Zurück-Knopf auf deinem Smartphone, um zum Tab-Bildschirm **Omnipod (POD)** zurückzukehren, auf dem jetzt Informationen zu deiner aktiven Pod-Sitzung angezeigt werden, einschließlich der aktuellen Basalrate, Pod Reservoir Level, abgegebenes Insulin, Pod Fehler und Warnungen.
- Weitere Details zu den angezeigten Informationen findest du im Tab [Omnipod (POD)](#omnipod-pod-tab) dieses Dokuments.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ Gehe wie folgt vor, um einen Pod zu deaktivieren (entweder vor dem Ablaufen der
Die folgenden Schritte zeigen Dir, wie Du die Insulinzufuhr aussetzen und fortsetzen kannst.
-*HINWEIS - wenn Du keinen Button 'Unterbrechen' siehst*, ist dessen Anzeige im Register Omnipod (POD) nicht aktiviert. Aktiviere **Button „Insulinabgabe unterbrechen“ im Omnipod Tab anzeigen** in den [Omnipod-Einstellungen](#omnipod-settings) in der Rubrik **Andere**.
+*HINWEIS - wenn Du keinen Button 'Unterbrechen' siehst*, ist dessen Anzeige im Register Omnipod (POD) nicht aktiviert. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Insulinabgabe unterbrechen
@@ -433,7 +433,7 @@ Im Folgenden werden die Anordnung und die Bedeutung der Symbole und Statusfelder
- **Insgesamt abgegeben:** Zeigt die Gesamtzahl der aus dem Reservoir abgegebenen Insulineinheiten an. *Beachte, dass es sich hierbei um einen Näherungswert handelt, da das Befüllen des Pods nicht absolut exakt geschieht.*
-- **Fehler:** Zeigt den letzten Fehler an. Überprüfe die [Pod Historie](#view-pod-history), [RileyLink Historie](#omnipod-eros-rileylink-and-active-pod-history) und die Protokolldateien auf aufgetretene Fehler und Detailinformationen.
+- **Fehler:** Zeigt den letzten Fehler an. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Aktive Pod-Warnungen:** Zeigt jeweils aktuelle Warnungen auf dem aktiven Pod. Wird normalerweise verwendet, wenn das Pod-Ablaufdatum nach 72 Stunden erreicht ist und native Pieptöne vom Pod ausgegeben werden.
@@ -447,7 +447,7 @@ Im Folgenden werden die Anordnung und die Bedeutung der Symbole und Statusfelder
>
> Verwende diese Option, um den Pod-Status zu aktualisieren und die Statusfelder zu erneuern, die den Text 'unsicher' enthalten.
>
- > Weitere Informationen zur [Problembehandlung](#troubleshooting) findest Du im Abschnitt unten.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From 9f8cb623ce2c26cc328ef5b1bfbefd061fd68859 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:03:17 +0200
Subject: [PATCH 033/303] New translations introduction.md (German)
---
docs/CROWDIN/de/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/de/Getting-Started/Introduction.md b/docs/CROWDIN/de/Getting-Started/Introduction.md
index c005a5aac0be..8a22ea812ab8 100644
--- a/docs/CROWDIN/de/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/de/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ Die obige Tabelle setzt voraus, dass die Nutzenden sowohl Zugang zu einem CGM-Sy
*Alle Daten von **AAPS** können medizinischen Fachkräften über Datenaustauschplattformen zur Verfügung gestellt werden, einschließlich Nightscout, das die Aufzeichnung und Echtzeitüberwachung von CGM-Daten, Insulinabgabe, Kohlenhydratangaben, Prognosen und Einstellungen ermöglicht. Aus Nightscout können Tages- und Wochenberichte erzeugt werden, die in Diskussionen eines Diabetes-Teams mit einem Typ 1-Patienten hilfreich sein können, da sie genauere Daten zur glykämischen Kontrolle und Verhaltensüberlegungen beisteuern.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Zugänglichkeit für AAPS-Nutzer, die teilweise oder vollständig blind sind
#### Tägliche Verwendung von AAPS:
From 209f4d144142f8d385848f4bf29d0b1dd239dd51 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:03:18 +0200
Subject: [PATCH 034/303] New translations preparingforaaps.md (German)
---
docs/CROWDIN/de/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/de/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/de/Getting-Started/PreparingForAaps.md
index 290c565eca03..0ad4ccdf7f94 100644
--- a/docs/CROWDIN/de/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/de/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ Um Dir durch den Erstellungsprozess zu helfen, gibt es eigene spezifische Abschn
- „[AAPS erstellen](../SettingUpAaps/BuildingAaps.md)“ (Abschnitt D), der einen Unterabschnitt zur [Fehlerbehebung](../GettingHelp/GeneralTroubleshooting.md) hat.
-Wie lange es dauert den Closed Loop zu erreichen ist individuell verschieden, ein grober Zeitablauf bis zum vollen Loopen mit AAPS findest Du ([hier](#how-long-will-it-take-to-set-everything-up)).
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Exportdatei des Keystore & der Konfigurationseinstellungen
@@ -188,7 +188,7 @@ Sobald Du **AAPS** voll nutzt, musst Du immer noch regelmäßig Deine Einstellun
### Medizinische Überlegungen
-Zusätzlich zu den medizinischen Warnungen in den [Sicherheitshinweisen](#safety-first) gibt es in Abhängigkeit vom in der Pumpe verwendeten Insulin weitere Parameter.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulinwahl
From 40df5d32c5d88f150c25917334da64fce70bb00a Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:05:52 +0200
Subject: [PATCH 035/303] New translations compatiblepumps.md (German)
---
docs/CROWDIN/de/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/de/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/de/Getting-Started/CompatiblePumps.md
index a91cd1054899..3571ef0065ac 100644
--- a/docs/CROWDIN/de/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/de/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS funktioniert mit einer Reihe von Insulinpumpen. Die folgende Liste enthäl
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([zusätzliches Kommunikationsgerät](#additional-communication-device) benötigt)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Bestimmte ältere [Medtronic](../CompatiblePumps/MedtronicPump.md)-Pumpen ([zusätzliches Kommunikationsgerät](#additional-communication-device) benötigt)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From 0cf5ffc3dc94c4bfebeaab6aadd4fbc361c29bef Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:05:53 +0200
Subject: [PATCH 036/303] New translations compatiblescgms.md (German)
---
docs/CROWDIN/de/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/de/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/de/Getting-Started/CompatiblesCgms.md
index c3c43c6b3c7e..9956797a85c6 100644
--- a/docs/CROWDIN/de/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/de/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ Dieser Abschnitt gibt einen kurzen Überblick über alle mit **AAPS** kompatible
* [xDrip+Einstellungen](../CompatibleCgms/xDrip.md)
* [Nightscout als BZ-Quelle](../CompatibleCgms/CgmNightscoutUpload.md): Auch wenn Nightscout als BZ-Quelle für die Insulinabgabe im Closed-Loop genutzt werden kann, **wird diese Methode nicht empfohlen**, da sie zwingend auf eine stabile (mobile) Datenverbindung oder eine WLAN-Verbindung angewiesen ist. Das bedeutet, dass Deine **CGM**-Daten nur dann von **AAPS** empfangen werden, wenn Du eine Online-Verbindung zu Deiner Nightscout-Website hast. Für ein zuverlässigeres Setup ist der Einsatz eines CGM mit lokaler Übertragung vom Receiver an **AAPS** die bessere Option.
-| CGM | Verfügbare [BZ-Quellen](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ und Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From 2c9b334908cc39de8f981769e45655eee5e15fd7 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:07:00 +0200
Subject: [PATCH 037/303] New translations aapsscreens.md (Greek)
---
.../el/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/el/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/el/DailyLifeWithAaps/AapsScreens.md
index b119fae8f8f5..7dc8a0890df5 100644
--- a/docs/CROWDIN/el/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/el/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ It is based on the expected drop in BG of the insulin in your system if no other
You can activate up to four additional graphs below the main graph. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### Υπολογιτής
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Calibrations
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Actions - section M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Button to start or cancel a temporary basal rate. Please note that the button changes from “TEMPBASAL” to “CANCEL x%” when a temporary basal rate is set.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* This option is only available for Dana RS and Insight pumps.
* Closed loop will automatically be stopped and switched to open loop mode for the time running extended bolus.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Careportal - section N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Careportal - section O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Prime/Fill allows you to record pump site and insulin cartridge change.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## History Browser
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From 3d3f91a92c6bb8d714523df629299e430630bc5f Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:07:05 +0200
Subject: [PATCH 038/303] New translations keyaapsfeatures.md (Greek)
---
docs/CROWDIN/el/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/el/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/el/DailyLifeWithAaps/KeyAapsFeatures.md
index 18d49cc6d1c5..fe9595b969ce 100644
--- a/docs/CROWDIN/el/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/el/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ For example, if the highest basal rate in your profile was 0.5 U/h you could mul
- Insulin-resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. It is different for ever
- Insulin resistant adult: 25
- Pregnant: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ If you have this option enabled, the insulin sensitivity will be decreased while
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). It will try and figure out how sensitive/resistant you are based on these deviations and adjust basal rate and ISF based on these deviations.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Ανθεκτικός στην ινσουλίνη ενήλικος: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Το μέγιστο συνολικό IOB που το OpenAPS μπορεί να δώσει\[U\] (OpenAPS "max-iob")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Ανθεκτικός στην ινσουλίνη ενήλικος: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Enable AMA Autosens
From 0c9c4e228394cc1c8131aceeaf8f2a0aef9cb24f Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:07:44 +0200
Subject: [PATCH 039/303] New translations devbranch.md (Greek)
---
docs/CROWDIN/el/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/el/AdvancedOptions/DevBranch.md b/docs/CROWDIN/el/AdvancedOptions/DevBranch.md
index ffdb8ef3b47d..e5d35bd515f8 100644
--- a/docs/CROWDIN/el/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/el/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From 485c3a7caae34226fa911c5bc545a5b04a4415fe Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:10:46 +0200
Subject: [PATCH 040/303] New translations diaconng8.md (Greek)
---
docs/CROWDIN/el/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/el/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/el/CompatiblePumps/DiaconnG8.md
index bc512f6db641..46d88dc8da63 100644
--- a/docs/CROWDIN/el/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/el/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Extended Bolus function
- If you use extended bolus it will disable closed loop.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From 73abf2b7f49897d5ef2f6560ac0d87e1e459ab23 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:10:51 +0200
Subject: [PATCH 041/303] New translations releasenotes.md (Greek)
---
docs/CROWDIN/el/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/el/Maintenance/ReleaseNotes.md b/docs/CROWDIN/el/Maintenance/ReleaseNotes.md
index d208375056fb..c7b043e696a5 100644
--- a/docs/CROWDIN/el/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/el/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ RECOMMENDED SETTING
- NSClient fixes
- Bolus advisor now works with Pumpcontrol and NSClient
+(version-2811)=
+
## Έκδοση 2.8.1.1
Ημερομηνία κυκλοφορίας: 12-01-2021
From 7f582006bd51aaf7560a3d49393d8225859b4658 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:10:54 +0200
Subject: [PATCH 042/303] New translations automations.md (Greek)
---
docs/CROWDIN/el/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/el/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/el/DailyLifeWithAaps/Automations.md
index 0d40ba8ec363..ad1e7837cf26 100644
--- a/docs/CROWDIN/el/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/el/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From 71c179354a87f6188bb8932659ca387fcfe94d11 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:10:57 +0200
Subject: [PATCH 043/303] New translations extendedcarbs.md (Greek)
---
docs/CROWDIN/el/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/el/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/el/DailyLifeWithAaps/ExtendedCarbs.md
index fb9309de5c8d..a1cd146bc832 100644
--- a/docs/CROWDIN/el/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/el/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ A scenario e.g. for a Pizza might be to give a (partial) bolus up front via the
**Important notes:** You'll need to try out and see which concrete values work for you of course. You might also carefully adjust the setting *max minutes of basal to limit SMB to* to make the algorithm more or less aggressive. Με γεύματα χαμηλών υδατανθράκων, υψηλών λιπαρών / πρωτεϊνών μπορεί να αρκεί να χρησιμοποιείτε μόνο τα eCarbs χωρίς χειροκίνητα bolus (βλ. Την ανάρτηση του ιστολογίου παραπάνω). Όταν δημιουργούνται τα eCarbs, δημιουργείται επίσης μια Σημείωση Careport για την τεκμηρίωση όλων των εισροών, για να διευκολυνθεί η επανάληψη και η βελτίωση των εισροών.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Extended bolus and why they won't work in closed-loop environment?
As mentioned above extended or multiwave boluses do not really work in a closed loop environment. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ That's why as of version 2.6 there is an option for an extended bolus for users

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Why extended boluses won't work in a closed loop environment
1. The loop determines that now 1.55U/h is to be delivered. Whether this is delivered as an extended bolus or TBR does not matter to the algorithm. In fact, some of the pumps use the extended bolus. What should happen then? Most pump drivers then stop the extended bolus -> You didn't even need to start it.
From eb1929637eb31f939f709c0ce17b812a82cef17b Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:11:36 +0200
Subject: [PATCH 044/303] New translations omnipoderos.md (Greek)
---
.../CROWDIN/el/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/el/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/el/CompatiblePumps/OmnipodEros.md
index bc3240147c7d..02dbe47f6c95 100644
--- a/docs/CROWDIN/el/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/el/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ On the **RileyLink Selection** screen press the **Scan** button and select your
Press the **Next** button to proceed with the rest of the **Setup Wizard.** It can take up to one minute for the selected RileyLink to initialize and the **Next** button to become active.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**OR**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via the top-left hand corner **hamburger menu** under **Config Builder (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. Selecting the **checkbox (4)** next to the **Settings Gear (3)** will display the Omnipod menu as a tab in the AAPS interface titled **POD**. This is referred to in this documentation as the **Omnipod (POD)** tab.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Please **swipe left** to the **Omnipod (POD)** tab where you will be able to man
### RileyLink Setup
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Note: A good visual indicator that the RileyLink is not connected is that the Insulin and Calculator buttons on the HOME tab will be missing. This will also occur for about the first 30 seconds after AAPS starts, as it is actively connecting to the RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. After selecting the Omnipod driver, identify and select your RileyLink from **Config Builder (1)** ➜**Pump**➜**Omnipod**➜**Gear Icon (Settings) (2)** ➜**RileyLink Configuration (3)** by pressing the **Not Set** or **MAC Address (if present)** text.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Before you can activate a pod please ensure you have properly configured and connected your RileyLink connection in the Omnipod settings
-*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigate to the **Omnipod (POD)** tab and click on the **POD MGMT (1)** button, and then click on **Activate Pod (2)**.
@@ -143,7 +143,7 @@ Before you can activate a pod please ensure you have properly configured and con
>
> Ensure the new pod and RileyLink are within close proximity of each other (~30cm or less) and click the **Next** button.
-03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Before you can activate a pod please ensure you have properly configured and con
Click on the back button on your phone to return to the **Omnipod (POD)** tab screen which will now display Pod information for your active pod session, including current basal rate, pod reservoir level, insulin delivered, pod errors and alerts.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
The process below will show you how to suspend and resume insulin pump delivery.
-*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspending Insulin Delivery
@@ -433,7 +433,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
- **Total delivered:** Displays the total number of units of insulin delivered from the reservoir. *Note this is an approximation as priming and filling the pod is not an exact process.*
-- **Errors:** Displays the last error encountered. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Errors:** Displays the last error encountered. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Active pod alerts:** Reserved for currently running alerts on the active pod. Normally used when pod expiration is past 72 hours and native pod beep alerts are running.
@@ -447,7 +447,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
>
> Use to refresh the pod status and dismiss status fields that contain the text (uncertain).
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From 37088aa39bc1e5f9cda51cb8784a3e49db65b54a Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:11:52 +0200
Subject: [PATCH 045/303] New translations introduction.md (Greek)
---
docs/CROWDIN/el/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/el/Getting-Started/Introduction.md b/docs/CROWDIN/el/Getting-Started/Introduction.md
index 6c8c1f5cfc28..8d187fc30d97 100644
--- a/docs/CROWDIN/el/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/el/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ The above table assumes that the user has access to both continuous gluocse moni
*All data from **AAPS** can be made available to healthcare professionals via data sharing platforms, including Nightscout that provides logging and real time monitoring of CGM data, insulin delivery, carbohydrate entries, predictions and settings. Nightscout records include daily and weekly reports which can aid healthcare professionals' discussions with type 1 patients with more accurate data on glycemic control and any behavioural considerations.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibility for users AAPS who are partially or completely blind
#### Day to day AAPS use:
From a2e98b2b761a3f6b8f1767dfd0aa7e0a862e796b Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:11:53 +0200
Subject: [PATCH 046/303] New translations preparingforaaps.md (Greek)
---
docs/CROWDIN/el/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/el/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/el/Getting-Started/PreparingForAaps.md
index e034d8417df2..71cfabe2a593 100644
--- a/docs/CROWDIN/el/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/el/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ To aid the build process there are dedicated sections:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore & configuration settings export file
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Medical considerations
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulin choice
From 2da1e7d33ccd2ba1b37ed4363b63643ae54680d2 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:14:28 +0200
Subject: [PATCH 047/303] New translations compatiblepumps.md (Greek)
---
docs/CROWDIN/el/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/el/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/el/Getting-Started/CompatiblePumps.md
index 5dd27835c82c..a59ba099938e 100644
--- a/docs/CROWDIN/el/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/el/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From 71be9b329da9e58dab90737e52d32552a407757c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:14:29 +0200
Subject: [PATCH 048/303] New translations compatiblescgms.md (Greek)
---
docs/CROWDIN/el/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/el/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/el/Getting-Started/CompatiblesCgms.md
index 5253fce5cd34..2764c11c2b9c 100644
--- a/docs/CROWDIN/el/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/el/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| CGM | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From 0efacb711eaf771d895f15b3a731f49d6c10cfa5 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:15:38 +0200
Subject: [PATCH 049/303] New translations aapsscreens.md (Hebrew)
---
.../he/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/he/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/he/DailyLifeWithAaps/AapsScreens.md
index bfcb559445a1..0811ec37395e 100644
--- a/docs/CROWDIN/he/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/he/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ When the standard basal rate is given, the area under the curve is shown in dark
ניתן להפעיל עד ארבעה גרפים נוספים מתחת לגרף הראשי. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### מחשבון
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### כיולים
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### פעולות - חלק M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
לחצן להפעלה או ביטול של מינון בזאלי זמני. שימו לב שהלחצן משתנה מ-"בזאלי זמני" ל-"ביטול %x" כאשר מוגדר מינון בזאלי זמני.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* אפשרות זו קיימת רק במשאבות Dana RS ו-Accu chek Insight.
* לולאה סגורה תיעצר אוטומטית ותעבור למצב לולאה פתוחה למשך זמן פעילות הבולוס הממושך.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### פורטל הטיפולים - חלק N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### פורטל הטיפולים - חלק O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
תיחול\מילוי מאפשר לתעד את החלפת מיקום חיבור צינורית המשאבה ואת החלפת מכל האינסולין.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## דפדפן היסטוריה
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From 5afc933fc8128614a647b51cbd7a6c336fc61a7f Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:15:42 +0200
Subject: [PATCH 050/303] New translations keyaapsfeatures.md (Hebrew)
---
docs/CROWDIN/he/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/he/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/he/DailyLifeWithAaps/KeyAapsFeatures.md
index 2ffffdbaad77..b9c80116de9b 100644
--- a/docs/CROWDIN/he/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/he/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ For example, if the highest basal rate in your profile was 0.5 U/h you could mul
- מבוגר\ת עם תנגודת אינסולין גבוהה: 12
- הריון: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. ה-Max-IOB שונה עב
- מבוגר\ת עם תנגודת אינסולין גבוהה: 25
- הריון: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ This is the [DynamicISF](../DailyLifeWithAaps/DynamicISF.md) feature. When enabl
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). It will try and figure out how sensitive/resistant you are based on these deviations and adjust basal rate and ISF based on these deviations.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- מבוגר\ת עם תנגודת אינסולין גבוהה: 12
- הריון: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### מינון אינסולין פעיל מרבי ממנו OpenAPS לא יחרוג (maxIOB)
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- מבוגר\ת עם תנגודת אינסולין גבוהה: 12
- הריון: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### הפעלת חישוב רגישות אוטומטי (Autosens)
From 9959772ef7cc07410bc23be6f92a132a2b44f396 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:16:21 +0200
Subject: [PATCH 051/303] New translations devbranch.md (Hebrew)
---
docs/CROWDIN/he/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/he/AdvancedOptions/DevBranch.md b/docs/CROWDIN/he/AdvancedOptions/DevBranch.md
index dd410c1dea17..5d180057f9e5 100644
--- a/docs/CROWDIN/he/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/he/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From 3aabd9ef13e166b6ea23b9ec5902490da99287a0 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:19:19 +0200
Subject: [PATCH 052/303] New translations diaconng8.md (Hebrew)
---
docs/CROWDIN/he/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/he/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/he/CompatiblePumps/DiaconnG8.md
index bc512f6db641..46d88dc8da63 100644
--- a/docs/CROWDIN/he/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/he/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Extended Bolus function
- If you use extended bolus it will disable closed loop.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From 731b1390624608c038b239b0db8fe5f303b7ebdc Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:19:24 +0200
Subject: [PATCH 053/303] New translations releasenotes.md (Hebrew)
---
docs/CROWDIN/he/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/he/Maintenance/ReleaseNotes.md b/docs/CROWDIN/he/Maintenance/ReleaseNotes.md
index d138c006987f..9e223f811ec7 100644
--- a/docs/CROWDIN/he/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/he/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Release date: 23-01-2021
- NSClient fixes
- Bolus advisor now works with Pumpcontrol and NSClient
+(version-2811)=
+
## Version 2.8.1.1
Release date: 12-01-2021
From b339d03ba755c393dbcecfc9dbf9c65d69f91245 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:19:28 +0200
Subject: [PATCH 054/303] New translations automations.md (Hebrew)
---
docs/CROWDIN/he/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/he/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/he/DailyLifeWithAaps/Automations.md
index 07be36210afe..0ef12d551306 100644
--- a/docs/CROWDIN/he/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/he/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From 8c5e400312f444189c7beeb2686ef43b5c286d5d Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:19:31 +0200
Subject: [PATCH 055/303] New translations extendedcarbs.md (Hebrew)
---
docs/CROWDIN/he/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/he/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/he/DailyLifeWithAaps/ExtendedCarbs.md
index 96ba39886fb3..e40510a381f7 100644
--- a/docs/CROWDIN/he/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/he/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ ______________________________________________________________________
**הערות חשובות:** חובה לבדוק בעצמכם ולגלות מהם הערכים המתאימים לכם. תוכלו גם להתאים בזהירות את ההגדרה *מקסימום הדקות של בזאלי אליו SMB מוגבל* כדי לגרום לאלגוריתם להיות אגרסיבי יותר או פחות. בארוחות דלות פחמימות שעתירות שומן\חלבון זה עשוי להספיק להשתמש רק בפחמימות ממושכות ללא בולוסים מקדימים ידניים (ראו את הפוסט בבלוג למעלה). כאשר נוצר רישום פחמימות ממושכות, נוצרת גם תיעוד בנייטסקאוט לתיעוד כל התשומות, כדי להקל על איטרציה ושיפור התשומות.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## בולוס מושהה ומדוע הוא לא יעבוד במערכת לולאה סגורה?
כפי שהוזכר לעיל בולוסים ממושכים או מרובי גלים לא באמת עובדים בסביבת לולאה סגורה. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ ______________________________________________________________________

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### הסיבה לכך שבולוסים מושהים לא יעבדו בלולאה סגורה
1. הלופ קובע שיש לספק עכשיו 1.55 יח'\שעה. לאלגוריתם לא משנה אם המינון הזה יוזרק כבולוס מושהה או כמינון בזאלי זמני. למעשה, חלק מהמשאבות משתמשות בבולוס המושהה. מה צריך לקרות? רוב המשאבות מפסיקות את הבולוס המושהה -> לא היינו צריכים להפעיל אותו.
From f3c2d17fc29370708c363738dd1700ced03c498f Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:20:11 +0200
Subject: [PATCH 056/303] New translations omnipoderos.md (Hebrew)
---
.../CROWDIN/he/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/he/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/he/CompatiblePumps/OmnipodEros.md
index c9eaf58a9419..045f103b3a10 100644
--- a/docs/CROWDIN/he/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/he/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ On the **RileyLink Selection** screen press the **Scan** button and select your
Press the **Next** button to proceed with the rest of the **Setup Wizard.** It can take up to one minute for the selected RileyLink to initialize and the **Next** button to become active.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**OR**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via the top-left hand corner **hamburger menu** under **Config Builder (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. Selecting the **checkbox (4)** next to the **Settings Gear (3)** will display the Omnipod menu as a tab in the AAPS interface titled **POD**. This is referred to in this documentation as the **Omnipod (POD)** tab.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Please **swipe left** to the **Omnipod (POD)** tab where you will be able to man
### RileyLink Setup
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Note: A good visual indicator that the RileyLink is not connected is that the Insulin and Calculator buttons on the HOME tab will be missing. This will also occur for about the first 30 seconds after AAPS starts, as it is actively connecting to the RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. After selecting the Omnipod driver, identify and select your RileyLink from **Config Builder (1)** ➜**Pump**➜**Omnipod**➜**Gear Icon (Settings) (2)** ➜**RileyLink Configuration (3)** by pressing the **Not Set** or **MAC Address (if present)** text.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Before you can activate a pod please ensure you have properly configured and connected your RileyLink connection in the Omnipod settings
-*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigate to the **Omnipod (POD)** tab and click on the **POD MGMT (1)** button, and then click on **Activate Pod (2)**.
@@ -143,7 +143,7 @@ Before you can activate a pod please ensure you have properly configured and con
>
> Ensure the new pod and RileyLink are within close proximity of each other (~30cm or less) and click the **Next** button.
-03. במסך **אתחול פוד**, הפוד יתחיל להתכונן להדבקה (אתם תשמעו קליק ואחריו סדרה של צלילי תקתוק). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. במסך **אתחול פוד**, הפוד יתחיל להתכונן להדבקה (אתם תשמעו קליק ואחריו סדרה של צלילי תקתוק). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Before you can activate a pod please ensure you have properly configured and con
Click on the back button on your phone to return to the **Omnipod (POD)** tab screen which will now display Pod information for your active pod session, including current basal rate, pod reservoir level, insulin delivered, pod errors and alerts.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
The process below will show you how to suspend and resume insulin pump delivery.
-*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspending Insulin Delivery
@@ -433,7 +433,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
- **סה"כ שהוזרק:** מציג את המספר הכולל של יחידות האינסולין שהוזרקו. *Note this is an approximation as priming and filling the pod is not an exact process.*
-- **שגיאות:** מציג את השגיאה האחרונה. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **שגיאות:** מציג את השגיאה האחרונה. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **התראות פוד פעילות:** שדה השמור להתראות הפועלות כרגע על הפוד הפעיל. Normally used when pod expiration is past 72 hours and native pod beep alerts are running.
@@ -447,7 +447,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
>
> השתמשו כדי לרענן את מצב הפוד ולבטל סטטוסים המכילים את הטקסט "(לא ודאי)".
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From 4724fe69965e9977d5080842a3f79c89650b481a Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:20:27 +0200
Subject: [PATCH 057/303] New translations introduction.md (Hebrew)
---
docs/CROWDIN/he/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/he/Getting-Started/Introduction.md b/docs/CROWDIN/he/Getting-Started/Introduction.md
index cc1671279cd8..3b2995c484fe 100644
--- a/docs/CROWDIN/he/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/he/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ The above table assumes that the user has access to both continuous gluocse moni
*All data from **AAPS** can be made available to healthcare professionals via data sharing platforms, including Nightscout that provides logging and real time monitoring of CGM data, insulin delivery, carbohydrate entries, predictions and settings. Nightscout records include daily and weekly reports which can aid healthcare professionals' discussions with type 1 patients with more accurate data on glycemic control and any behavioural considerations.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibility for users AAPS who are partially or completely blind
#### Day to day AAPS use:
From 0ccbee31afeeca3e4fd900b6dc44ece5b9382446 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:20:28 +0200
Subject: [PATCH 058/303] New translations preparingforaaps.md (Hebrew)
---
docs/CROWDIN/he/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/he/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/he/Getting-Started/PreparingForAaps.md
index e8e4a8ab2b3a..ee2896a35728 100644
--- a/docs/CROWDIN/he/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/he/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ To aid the build process there are dedicated sections:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore & configuration settings export file
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Medical considerations
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulin choice
From a1b1f50e057ebd47d5e0bcd84e6c65aa9c165d48 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:23:05 +0200
Subject: [PATCH 059/303] New translations compatiblepumps.md (Hebrew)
---
docs/CROWDIN/he/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/he/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/he/Getting-Started/CompatiblePumps.md
index fd11f1e31abd..6b5a52cfc289 100644
--- a/docs/CROWDIN/he/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/he/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From e81517fc7540eb30a92ba362a2792f7d3aeb29bb Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:23:06 +0200
Subject: [PATCH 060/303] New translations compatiblescgms.md (Hebrew)
---
docs/CROWDIN/he/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/he/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/he/Getting-Started/CompatiblesCgms.md
index 4afe9ca4ad90..e3377f1b4d43 100644
--- a/docs/CROWDIN/he/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/he/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| סנסור | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| סנסור | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From 6635b6bb303168885f9817fef9e331de3b532e5c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:24:12 +0200
Subject: [PATCH 061/303] New translations aapsscreens.md (Korean)
---
.../ko/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/ko/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/ko/DailyLifeWithAaps/AapsScreens.md
index 55185d53d668..e0d9e31f8941 100644
--- a/docs/CROWDIN/ko/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/ko/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ It is based on the expected drop in BG of the insulin in your system if no other
You can activate up to four additional graphs below the main graph. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### 계산기
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Calibrations
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Actions - section M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Button to start or cancel a temporary basal rate. Please note that the button changes from “TEMPBASAL” to “CANCEL x%” when a temporary basal rate is set.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* This option is only available for Dana RS and Insight pumps.
* Closed loop will automatically be stopped and switched to open loop mode for the time running extended bolus.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Careportal - section N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Careportal - section O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Prime/Fill allows you to record pump site and insulin cartridge change.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## History Browser
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From 399d31a00d07846dcea03bc8802b05e36c50d23c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:24:16 +0200
Subject: [PATCH 062/303] New translations keyaapsfeatures.md (Korean)
---
docs/CROWDIN/ko/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/ko/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/ko/DailyLifeWithAaps/KeyAapsFeatures.md
index 5bc8fd4b3b04..d71dfebc14fc 100644
--- a/docs/CROWDIN/ko/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/ko/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ For example, if the highest basal rate in your profile was 0.5 U/h you could mul
- 인슐린 저항성이 있는 성인: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. It is different for ever
- Insulin resistant adult: 25
- Pregnant: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ If you have this option enabled, the insulin sensitivity will be decreased while
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). It will try and figure out how sensitive/resistant you are based on these deviations and adjust basal rate and ISF based on these deviations.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Insulin resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Maximum basal IOB OpenAPS can deliver \[U\] (OpenAPS "max-iob")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Insulin resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Enable AMA Autosens
From 698b8829a8f7875cd9289e0820f399d016318180 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:24:54 +0200
Subject: [PATCH 063/303] New translations devbranch.md (Korean)
---
docs/CROWDIN/ko/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/ko/AdvancedOptions/DevBranch.md b/docs/CROWDIN/ko/AdvancedOptions/DevBranch.md
index dd410c1dea17..5d180057f9e5 100644
--- a/docs/CROWDIN/ko/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/ko/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From 737175304ce281ae0562700cd70fc8a42046e5df Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:27:52 +0200
Subject: [PATCH 064/303] New translations diaconng8.md (Korean)
---
docs/CROWDIN/ko/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/ko/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/ko/CompatiblePumps/DiaconnG8.md
index bc512f6db641..46d88dc8da63 100644
--- a/docs/CROWDIN/ko/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/ko/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Extended Bolus function
- If you use extended bolus it will disable closed loop.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From 0305609fb7e25683d85bc0e3d7c1aecf47e936de Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:27:57 +0200
Subject: [PATCH 065/303] New translations releasenotes.md (Korean)
---
docs/CROWDIN/ko/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/ko/Maintenance/ReleaseNotes.md b/docs/CROWDIN/ko/Maintenance/ReleaseNotes.md
index 78534579cc99..7d720070e53d 100644
--- a/docs/CROWDIN/ko/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/ko/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Release date: 23-01-2021
- NSClient fixes
- Bolus advisor now works with Pumpcontrol and NSClient
+(version-2811)=
+
## Version 2.8.1.1
Release date: 12-01-2021
From 1624741e3b098fc28124f81590b824fca399515c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:28:01 +0200
Subject: [PATCH 066/303] New translations automations.md (Korean)
---
docs/CROWDIN/ko/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/ko/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/ko/DailyLifeWithAaps/Automations.md
index 5f548fb2e1cd..b809cb1962ba 100644
--- a/docs/CROWDIN/ko/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/ko/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From 320c81980ac75beb099cec56867d0e79c7cab525 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:28:03 +0200
Subject: [PATCH 067/303] New translations extendedcarbs.md (Korean)
---
docs/CROWDIN/ko/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/ko/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/ko/DailyLifeWithAaps/ExtendedCarbs.md
index 8eca2495aad0..73a95b9a29da 100644
--- a/docs/CROWDIN/ko/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/ko/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ A scenario e.g. for a Pizza might be to give a (partial) bolus up front via the
**Important notes:** You'll need to try out and see which concrete values work for you of course. You might also carefully adjust the setting *max minutes of basal to limit SMB to* to make the algorithm more or less aggressive. 저탄수화물, 고지방/고단백질 음식은 수동적인 bolus 없이 eCarbs만 사용해도 된다.(위의 블로그 포스트를 참고) eCarbs가 입력되면, 케어포털 메뉴는 더 쉽게 입력하게 만들어주고 모든 입력 내용을 문서화 한다.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Extended bolus and why they won't work in closed-loop environment?
위에서 언급한 것과 같이, 확장 또는 멀티 웨이브 bolus는 Closed Loop에서 효과적으로 동작하지 않는다. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ That's why as of version 2.6 there is an option for an extended bolus for users

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Why extended boluses won't work in a closed loop environment
1. Loop는 현재 1.55U/h로 주입하기로 결정한다. 이것이 확장 bolus로 주입되는지 TBR로 주입되는지는 알고리즘에서 중요하지 않다. 사실, 일부 펌프는 확장 bolus을 사용한다. 그러면 어떻게 동작해야 할까? Most pump drivers then stop the extended bolus -> You didn't even need to start it.
From ab90f55679b1527e9aedf05a373b951c46d1e3d9 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:28:42 +0200
Subject: [PATCH 068/303] New translations omnipoderos.md (Korean)
---
.../CROWDIN/ko/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/ko/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/ko/CompatiblePumps/OmnipodEros.md
index cbe87748dab9..fef06bbe610b 100644
--- a/docs/CROWDIN/ko/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/ko/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ On the **RileyLink Selection** screen press the **Scan** button and select your
Press the **Next** button to proceed with the rest of the **Setup Wizard.** It can take up to one minute for the selected RileyLink to initialize and the **Next** button to become active.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**OR**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via the top-left hand corner **hamburger menu** under **Config Builder (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. Selecting the **checkbox (4)** next to the **Settings Gear (3)** will display the Omnipod menu as a tab in the AAPS interface titled **POD**. This is referred to in this documentation as the **Omnipod (POD)** tab.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Please **swipe left** to the **Omnipod (POD)** tab where you will be able to man
### RileyLink Setup
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Note: A good visual indicator that the RileyLink is not connected is that the Insulin and Calculator buttons on the HOME tab will be missing. This will also occur for about the first 30 seconds after AAPS starts, as it is actively connecting to the RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. After selecting the Omnipod driver, identify and select your RileyLink from **Config Builder (1)** ➜**Pump**➜**Omnipod**➜**Gear Icon (Settings) (2)** ➜**RileyLink Configuration (3)** by pressing the **Not Set** or **MAC Address (if present)** text.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Before you can activate a pod please ensure you have properly configured and connected your RileyLink connection in the Omnipod settings
-*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigate to the **Omnipod (POD)** tab and click on the **POD MGMT (1)** button, and then click on **Activate Pod (2)**.
@@ -143,7 +143,7 @@ Before you can activate a pod please ensure you have properly configured and con
>
> Ensure the new pod and RileyLink are within close proximity of each other (~30cm or less) and click the **Next** button.
-03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Before you can activate a pod please ensure you have properly configured and con
Click on the back button on your phone to return to the **Omnipod (POD)** tab screen which will now display Pod information for your active pod session, including current basal rate, pod reservoir level, insulin delivered, pod errors and alerts.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
The process below will show you how to suspend and resume insulin pump delivery.
-*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspending Insulin Delivery
@@ -433,7 +433,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
- **Total delivered:** Displays the total number of units of insulin delivered from the reservoir. *Note this is an approximation as priming and filling the pod is not an exact process.*
-- **Errors:** Displays the last error encountered. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Errors:** Displays the last error encountered. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Active pod alerts:** Reserved for currently running alerts on the active pod. Normally used when pod expiration is past 72 hours and native pod beep alerts are running.
@@ -447,7 +447,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
>
> Use to refresh the pod status and dismiss status fields that contain the text (uncertain).
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From 30d2392a679213502cf08fe8b40d4ac02136bfaf Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:28:57 +0200
Subject: [PATCH 069/303] New translations introduction.md (Korean)
---
docs/CROWDIN/ko/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/ko/Getting-Started/Introduction.md b/docs/CROWDIN/ko/Getting-Started/Introduction.md
index b40442ea9c3f..eeec5567be10 100644
--- a/docs/CROWDIN/ko/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/ko/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ The above table assumes that the user has access to both continuous gluocse moni
*All data from **AAPS** can be made available to healthcare professionals via data sharing platforms, including Nightscout that provides logging and real time monitoring of CGM data, insulin delivery, carbohydrate entries, predictions and settings. Nightscout records include daily and weekly reports which can aid healthcare professionals' discussions with type 1 patients with more accurate data on glycemic control and any behavioural considerations.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibility for users AAPS who are partially or completely blind
#### Day to day AAPS use:
From 6ba20a90e391f0161250acafa724df5a22886217 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:28:59 +0200
Subject: [PATCH 070/303] New translations preparingforaaps.md (Korean)
---
docs/CROWDIN/ko/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/ko/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/ko/Getting-Started/PreparingForAaps.md
index 5bfd1c4195fe..67246110210b 100644
--- a/docs/CROWDIN/ko/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/ko/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ To aid the build process there are dedicated sections:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore & configuration settings export file
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Medical considerations
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulin choice
From 2bff8c3293006e77b72699cf8c977b9e089940bf Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:31:31 +0200
Subject: [PATCH 071/303] New translations compatiblepumps.md (Korean)
---
docs/CROWDIN/ko/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/ko/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/ko/Getting-Started/CompatiblePumps.md
index 5dd27835c82c..a59ba099938e 100644
--- a/docs/CROWDIN/ko/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/ko/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From 32b26ee1e0fb00e39f8b6ac45ba4304c5fcdbc00 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:31:32 +0200
Subject: [PATCH 072/303] New translations compatiblescgms.md (Korean)
---
docs/CROWDIN/ko/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/ko/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/ko/Getting-Started/CompatiblesCgms.md
index 12615c68465d..8ab8b675c5b8 100644
--- a/docs/CROWDIN/ko/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/ko/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| CGM | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From 11aa74287c05ee03c39ee215b5c6e524339b1277 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:32:38 +0200
Subject: [PATCH 073/303] New translations aapsscreens.md (Lithuanian)
---
.../lt/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/lt/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/lt/DailyLifeWithAaps/AapsScreens.md
index 2ac7a1619c05..1ae50fa43b11 100644
--- a/docs/CROWDIN/lt/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/lt/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ It is based on the expected drop in BG of the insulin in your system if no other
You can activate up to four additional graphs below the main graph. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### Skaičiuotuvas
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Calibrations
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Actions - section M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Button to start or cancel a temporary basal rate. Please note that the button changes from “TEMPBASAL” to “CANCEL x%” when a temporary basal rate is set.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* This option is only available for Dana RS and Insight pumps.
* Closed loop will automatically be stopped and switched to open loop mode for the time running extended bolus.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Careportal - section N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Careportal - section O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Prime/Fill allows you to record pump site and insulin cartridge change.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## History Browser
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From 7fad35adde1b1f0f35d8fbcbdc086492c269fb76 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:32:41 +0200
Subject: [PATCH 074/303] New translations keyaapsfeatures.md (Lithuanian)
---
docs/CROWDIN/lt/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/lt/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/lt/DailyLifeWithAaps/KeyAapsFeatures.md
index 0718ba3c00de..6d79ebfb8b88 100644
--- a/docs/CROWDIN/lt/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/lt/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ For example, if the highest basal rate in your profile was 0.5 U/h you could mul
- Insulin-resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. It is different for ever
- Insulin resistant adult: 25
- Pregnant: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ If you have this option enabled, the insulin sensitivity will be decreased while
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). It will try and figure out how sensitive/resistant you are based on these deviations and adjust basal rate and ISF based on these deviations.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Insulin resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Maximum basal IOB OpenAPS can deliver \[U\] (OpenAPS "max-iob")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Insulin resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Enable AMA Autosens
From b9ae5071dd20999efba3f4767c52c38ff36359b6 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:33:20 +0200
Subject: [PATCH 075/303] New translations devbranch.md (Lithuanian)
---
docs/CROWDIN/lt/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/lt/AdvancedOptions/DevBranch.md b/docs/CROWDIN/lt/AdvancedOptions/DevBranch.md
index 1ce1faca2aff..2b4092c3bf26 100644
--- a/docs/CROWDIN/lt/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/lt/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From d6b500a09e5865617f4556224d0e564ad97a9eba Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:36:15 +0200
Subject: [PATCH 076/303] New translations diaconng8.md (Lithuanian)
---
docs/CROWDIN/lt/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/lt/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/lt/CompatiblePumps/DiaconnG8.md
index bc512f6db641..46d88dc8da63 100644
--- a/docs/CROWDIN/lt/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/lt/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Extended Bolus function
- If you use extended bolus it will disable closed loop.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From a396e23558006435cdb3a24b4bb6afabf21d3fa5 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:36:21 +0200
Subject: [PATCH 077/303] New translations releasenotes.md (Lithuanian)
---
docs/CROWDIN/lt/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/lt/Maintenance/ReleaseNotes.md b/docs/CROWDIN/lt/Maintenance/ReleaseNotes.md
index 47feb198b4b3..003430be9753 100644
--- a/docs/CROWDIN/lt/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/lt/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Release date: 23-01-2021
- NSClient fixes
- Bolus advisor now works with Pumpcontrol and NSClient
+(version-2811)=
+
## Version 2.8.1.1
Release date: 12-01-2021
From cf63366526427515b7f2968d786458c8214e9504 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:36:24 +0200
Subject: [PATCH 078/303] New translations automations.md (Lithuanian)
---
docs/CROWDIN/lt/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/lt/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/lt/DailyLifeWithAaps/Automations.md
index c1daa72689c2..9fbfb4fe13f4 100644
--- a/docs/CROWDIN/lt/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/lt/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From c9c3b8e5d8d1a1bd0440afc8a9d9f17be7c95278 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:36:26 +0200
Subject: [PATCH 079/303] New translations extendedcarbs.md (Lithuanian)
---
docs/CROWDIN/lt/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/lt/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/lt/DailyLifeWithAaps/ExtendedCarbs.md
index 3e6523495237..6ba75a1649a6 100644
--- a/docs/CROWDIN/lt/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/lt/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ A scenario e.g. for a Pizza might be to give a (partial) bolus up front via the
**Important notes:** You'll need to try out and see which concrete values work for you of course. You might also carefully adjust the setting *max minutes of basal to limit SMB to* to make the algorithm more or less aggressive. Laikantis mitybos, kuriojee mažai angliavandenių, ir daugiau riebalų bei baltymų, gali pakakti įvesti tik iAV be įprasto boluso maistui (plačiau apie tai aukščiau tinklaraščio įraše). Įvedus iAV, Priežiūros portale automatiškai sukuriamas užrašas, kad būtų lengviau patikrinti ir pakoreguoti įrašus.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Extended bolus and why they won't work in closed-loop environment?
Kaip jau minėta aukščiau, ištęstas arba vadinamasis daugiabangis bolusas neveikia su uždaru ciklu. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ Kai kurie žmonės vis dar prašė parinkties AAPS naudoti ištęstinius bolusus

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Kodėl ištęstas bolusas neveiks uždaro ciklo aplinkoje
1. Ciklas nustato, kad turi būti suleista 1.55 vv/h. Algoritmui nesvarbu, ar suleidžiama kaip ištęstas boliusas, ar kaip TBR (laikina valandinė bazė). Tiesą sakant, kai kurios pompos naudoja ištęstus bolusus. Kas tada atsitinka? Most pump drivers then stop the extended bolus -> You didn't even need to start it.
From 827510f8bccb462b7f75f06bcbcd739bcfb6d40a Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:37:04 +0200
Subject: [PATCH 080/303] New translations omnipoderos.md (Lithuanian)
---
.../CROWDIN/lt/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/lt/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/lt/CompatiblePumps/OmnipodEros.md
index a6dfca99889a..a5476fa24d4f 100644
--- a/docs/CROWDIN/lt/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/lt/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ On the **RileyLink Selection** screen press the **Scan** button and select your
Press the **Next** button to proceed with the rest of the **Setup Wizard.** It can take up to one minute for the selected RileyLink to initialize and the **Next** button to become active.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**OR**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via the top-left hand corner **hamburger menu** under **Config Builder (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. Selecting the **checkbox (4)** next to the **Settings Gear (3)** will display the Omnipod menu as a tab in the AAPS interface titled **POD**. This is referred to in this documentation as the **Omnipod (POD)** tab.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Please **swipe left** to the **Omnipod (POD)** tab where you will be able to man
### RileyLink Setup
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Note: A good visual indicator that the RileyLink is not connected is that the Insulin and Calculator buttons on the HOME tab will be missing. This will also occur for about the first 30 seconds after AAPS starts, as it is actively connecting to the RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. After selecting the Omnipod driver, identify and select your RileyLink from **Config Builder (1)** ➜**Pump**➜**Omnipod**➜**Gear Icon (Settings) (2)** ➜**RileyLink Configuration (3)** by pressing the **Not Set** or **MAC Address (if present)** text.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Before you can activate a pod please ensure you have properly configured and connected your RileyLink connection in the Omnipod settings
-*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigate to the **Omnipod (POD)** tab and click on the **POD MGMT (1)** button, and then click on **Activate Pod (2)**.
@@ -143,7 +143,7 @@ Before you can activate a pod please ensure you have properly configured and con
>
> Ensure the new pod and RileyLink are within close proximity of each other (~30cm or less) and click the **Next** button.
-03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Before you can activate a pod please ensure you have properly configured and con
Click on the back button on your phone to return to the **Omnipod (POD)** tab screen which will now display Pod information for your active pod session, including current basal rate, pod reservoir level, insulin delivered, pod errors and alerts.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
The process below will show you how to suspend and resume insulin pump delivery.
-*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspending Insulin Delivery
@@ -433,7 +433,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
- **Total delivered:** Displays the total number of units of insulin delivered from the reservoir. *Note this is an approximation as priming and filling the pod is not an exact process.*
-- **Errors:** Displays the last error encountered. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Errors:** Displays the last error encountered. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Active pod alerts:** Reserved for currently running alerts on the active pod. Normally used when pod expiration is past 72 hours and native pod beep alerts are running.
@@ -447,7 +447,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
>
> Use to refresh the pod status and dismiss status fields that contain the text (uncertain).
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From ab3755e9f39935e6b49116e31754758167ff65a6 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:37:20 +0200
Subject: [PATCH 081/303] New translations introduction.md (Lithuanian)
---
docs/CROWDIN/lt/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/lt/Getting-Started/Introduction.md b/docs/CROWDIN/lt/Getting-Started/Introduction.md
index 1d0dd9cbbe13..eb50836d022a 100644
--- a/docs/CROWDIN/lt/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/lt/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ The above table assumes that the user has access to both continuous gluocse moni
*All data from **AAPS** can be made available to healthcare professionals via data sharing platforms, including Nightscout that provides logging and real time monitoring of CGM data, insulin delivery, carbohydrate entries, predictions and settings. Nightscout records include daily and weekly reports which can aid healthcare professionals' discussions with type 1 patients with more accurate data on glycemic control and any behavioural considerations.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibility for users AAPS who are partially or completely blind
#### Day to day AAPS use:
From 74bd934fba8a1cad30d5b36983b772951301250c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:37:21 +0200
Subject: [PATCH 082/303] New translations preparingforaaps.md (Lithuanian)
---
docs/CROWDIN/lt/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/lt/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/lt/Getting-Started/PreparingForAaps.md
index cdc03c112700..812dd5af1768 100644
--- a/docs/CROWDIN/lt/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/lt/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ To aid the build process there are dedicated sections:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore & configuration settings export file
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Medical considerations
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulin choice
From ec2b9a805b679a85285d7fc2c04beb63e1b74eab Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:39:52 +0200
Subject: [PATCH 083/303] New translations compatiblepumps.md (Lithuanian)
---
docs/CROWDIN/lt/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/lt/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/lt/Getting-Started/CompatiblePumps.md
index 5dd27835c82c..a59ba099938e 100644
--- a/docs/CROWDIN/lt/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/lt/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From 49db4797fa57ae93b4b37ff286ce7c8e542a8c7d Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:39:53 +0200
Subject: [PATCH 084/303] New translations compatiblescgms.md (Lithuanian)
---
docs/CROWDIN/lt/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/lt/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/lt/Getting-Started/CompatiblesCgms.md
index 3e9182c6a34f..40feed463882 100644
--- a/docs/CROWDIN/lt/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/lt/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| NGJ | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| NGJ | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From 16a47148bad837e5891bbe7fca18f9157001a883 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:40:59 +0200
Subject: [PATCH 085/303] New translations aapsscreens.md (Dutch)
---
.../nl/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/nl/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/nl/DailyLifeWithAaps/AapsScreens.md
index 3f6bcd24b74d..0866bad55e62 100644
--- a/docs/CROWDIN/nl/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/nl/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ It is based on the expected drop in BG of the insulin in your system if no other
You can activate up to four additional graphs below the main graph. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### Boluscalculator
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Calibrations
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Acties - sectie M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Button to start or cancel a temporary basal rate. Please note that the button changes from “TEMPBASAL” to “CANCEL x%” when a temporary basal rate is set.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* This option is only available for Dana RS and Insight pumps.
* Closed loop will automatically be stopped and switched to open loop mode for the time running extended bolus.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Careportal - sectie N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Careportal - sectie O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Prime/Fill allows you to record pump site and insulin cartridge change.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## History Browser
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From f5bbc376ff706f9009c611e1a660baca98a78732 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:41:03 +0200
Subject: [PATCH 086/303] New translations keyaapsfeatures.md (Dutch)
---
docs/CROWDIN/nl/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/nl/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/nl/DailyLifeWithAaps/KeyAapsFeatures.md
index 64cc1be9b1e3..d80428226382 100644
--- a/docs/CROWDIN/nl/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/nl/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ For example, if the highest basal rate in your profile was 0.5 U/h you could mul
- Insuline-resistente volwassene: 12
- Zwangere: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. It is different for ever
- Insuline-resistente volwassene: 25
- Zwangere: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ If you have this option enabled, the insulin sensitivity will be decreased while
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). It will try and figure out how sensitive/resistant you are based on these deviations and adjust basal rate and ISF based on these deviations.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Insuline-resistente volwassene: 12
- Zwangere: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Max basaal IOB dat OpenAPS kan toedienen \[E\] (OpenAPS "max-iob")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Insuline-resistente volwassene: 12
- Zwangere: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Enable AMA Autosens
From 4a81faedac408980362b1cd3b21d3873c1cec6c6 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:41:41 +0200
Subject: [PATCH 087/303] New translations devbranch.md (Dutch)
---
docs/CROWDIN/nl/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/nl/AdvancedOptions/DevBranch.md b/docs/CROWDIN/nl/AdvancedOptions/DevBranch.md
index 06c8b397abf3..bbca733acbd4 100644
--- a/docs/CROWDIN/nl/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/nl/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From 9baf209af53a8e9509c7316014c65ab7ba09928b Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:44:34 +0200
Subject: [PATCH 088/303] New translations diaconng8.md (Dutch)
---
docs/CROWDIN/nl/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/nl/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/nl/CompatiblePumps/DiaconnG8.md
index bc512f6db641..46d88dc8da63 100644
--- a/docs/CROWDIN/nl/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/nl/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Extended Bolus function
- If you use extended bolus it will disable closed loop.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From 3c83afe3414cdbb02d0bf640c7f38305616bccc2 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:44:39 +0200
Subject: [PATCH 089/303] New translations releasenotes.md (Dutch)
---
docs/CROWDIN/nl/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/nl/Maintenance/ReleaseNotes.md b/docs/CROWDIN/nl/Maintenance/ReleaseNotes.md
index 39b0796a692f..9bde9872979b 100644
--- a/docs/CROWDIN/nl/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/nl/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Release datum: 23-01-2021
- NSClient fixes
- Bolus advisor now works with Pumpcontrol and NSClient
+(version-2811)=
+
## Versie 2.8.1.1
Release datum: 12-01-2021
From aa2e49e1caca329485787b37d60c180174af62dc Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:44:42 +0200
Subject: [PATCH 090/303] New translations automations.md (Dutch)
---
docs/CROWDIN/nl/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/nl/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/nl/DailyLifeWithAaps/Automations.md
index ee6263dd675c..de9e61dd09cf 100644
--- a/docs/CROWDIN/nl/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/nl/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From 0ba0693a823c83afeb916f3187e48c0c53d7c7c8 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:44:45 +0200
Subject: [PATCH 091/303] New translations extendedcarbs.md (Dutch)
---
docs/CROWDIN/nl/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/nl/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/nl/DailyLifeWithAaps/ExtendedCarbs.md
index dfc4fd08c638..20c309026198 100644
--- a/docs/CROWDIN/nl/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/nl/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ A scenario e.g. for a Pizza might be to give a (partial) bolus up front via the
**Important notes:** You'll need to try out and see which concrete values work for you of course. You might also carefully adjust the setting *max minutes of basal to limit SMB to* to make the algorithm more or less aggressive. Voor maaltijden met nauwelijks koolhydraten en een hoog vet/eiwitgehalte kan het genoeg zijn om alleen eCarbs te gebruiken en geen bolus (zie de blogpost hierboven). Iedere keer dat je eCarbs invoert, wordt er in jouw Careportal automatisch een opmerking toegevoegd. Hierdoor kun je de eerdere keren gemakkelijk terugvinden, zodat je jouw aanpak kunt evalueren en verbeteren voor de volgende keer. Of gewoon herhalen wat je eerder deed, als dat voor jou goed werkte.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Extended bolus and why they won't work in closed-loop environment?
Zoals hierboven vermeld, werken vertraagde of multiwave bolussen niet echt in een closed loop. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ Daarom is er vanaf versie 2.6 een optie voor een vertraagde bolus toegevoegd, de

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Waarom vertraagde bolussen niet werken in een closed loop
1. The loop determines that now 1.55U/h is to be delivered. Whether this is delivered as an extended bolus or TBR does not matter to the algorithm. In fact, some of the pumps use the extended bolus. What should happen then? Most pump drivers then stop the extended bolus -> You didn't even need to start it.
From 5414d9a2f90ba08f0805e1d1ed37213fa035a318 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:45:23 +0200
Subject: [PATCH 092/303] New translations omnipoderos.md (Dutch)
---
.../CROWDIN/nl/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/nl/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/nl/CompatiblePumps/OmnipodEros.md
index 2a31157971b8..05f6ef6c63a6 100644
--- a/docs/CROWDIN/nl/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/nl/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ On the **RileyLink Selection** screen press the **Scan** button and select your
Press the **Next** button to proceed with the rest of the **Setup Wizard.** It can take up to one minute for the selected RileyLink to initialize and the **Next** button to become active.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**OR**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via the top-left hand corner **hamburger menu** under **Config Builder (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. Selecting the **checkbox (4)** next to the **Settings Gear (3)** will display the Omnipod menu as a tab in the AAPS interface titled **POD**. This is referred to in this documentation as the **Omnipod (POD)** tab.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Please **swipe left** to the **Omnipod (POD)** tab where you will be able to man
### RileyLink Setup
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Note: A good visual indicator that the RileyLink is not connected is that the Insulin and Calculator buttons on the HOME tab will be missing. This will also occur for about the first 30 seconds after AAPS starts, as it is actively connecting to the RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. After selecting the Omnipod driver, identify and select your RileyLink from **Config Builder (1)** ➜**Pump**➜**Omnipod**➜**Gear Icon (Settings) (2)** ➜**RileyLink Configuration (3)** by pressing the **Not Set** or **MAC Address (if present)** text.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Before you can activate a pod please ensure you have properly configured and connected your RileyLink connection in the Omnipod settings
-*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigate to the **Omnipod (POD)** tab and click on the **POD MGMT (1)** button, and then click on **Activate Pod (2)**.
@@ -143,7 +143,7 @@ Before you can activate a pod please ensure you have properly configured and con
>
> Ensure the new pod and RileyLink are within close proximity of each other (~30cm or less) and click the **Next** button.
-03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Before you can activate a pod please ensure you have properly configured and con
Click on the back button on your phone to return to the **Omnipod (POD)** tab screen which will now display Pod information for your active pod session, including current basal rate, pod reservoir level, insulin delivered, pod errors and alerts.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
The process below will show you how to suspend and resume insulin pump delivery.
-*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspending Insulin Delivery
@@ -433,7 +433,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
- **Total delivered:** Displays the total number of units of insulin delivered from the reservoir. *Note this is an approximation as priming and filling the pod is not an exact process.*
-- **Errors:** Displays the last error encountered. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Errors:** Displays the last error encountered. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Active pod alerts:** Reserved for currently running alerts on the active pod. Normally used when pod expiration is past 72 hours and native pod beep alerts are running.
@@ -447,7 +447,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
>
> Use to refresh the pod status and dismiss status fields that contain the text (uncertain).
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From 5d55441f4b868c728948365ad51d5f7d8ce936e6 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:45:39 +0200
Subject: [PATCH 093/303] New translations introduction.md (Dutch)
---
docs/CROWDIN/nl/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/nl/Getting-Started/Introduction.md b/docs/CROWDIN/nl/Getting-Started/Introduction.md
index 0d8ce3f0900d..42ce80acd803 100644
--- a/docs/CROWDIN/nl/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/nl/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ The above table assumes that the user has access to both continuous gluocse moni
*All data from **AAPS** can be made available to healthcare professionals via data sharing platforms, including Nightscout that provides logging and real time monitoring of CGM data, insulin delivery, carbohydrate entries, predictions and settings. Nightscout records include daily and weekly reports which can aid healthcare professionals' discussions with type 1 patients with more accurate data on glycemic control and any behavioural considerations.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibility for users AAPS who are partially or completely blind
#### Day to day AAPS use:
From 8a824388e86a90a8e2e1a44ea11557c9a2544efe Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:45:40 +0200
Subject: [PATCH 094/303] New translations preparingforaaps.md (Dutch)
---
docs/CROWDIN/nl/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/nl/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/nl/Getting-Started/PreparingForAaps.md
index 1525dc851b8d..0e553b8d537d 100644
--- a/docs/CROWDIN/nl/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/nl/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ To aid the build process there are dedicated sections:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore & configuration settings export file
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Medical considerations
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulin choice
From 684b0d302e5dfa9a02aa9df75c0e97dd8b53fe5d Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:48:10 +0200
Subject: [PATCH 095/303] New translations compatiblepumps.md (Dutch)
---
docs/CROWDIN/nl/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/nl/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/nl/Getting-Started/CompatiblePumps.md
index 5dd27835c82c..a59ba099938e 100644
--- a/docs/CROWDIN/nl/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/nl/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From 1ed4856859800c0dbe914a3ff919a9bec9e8d926 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:48:11 +0200
Subject: [PATCH 096/303] New translations compatiblescgms.md (Dutch)
---
docs/CROWDIN/nl/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/nl/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/nl/Getting-Started/CompatiblesCgms.md
index 5253fce5cd34..2764c11c2b9c 100644
--- a/docs/CROWDIN/nl/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/nl/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| CGM | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From 5134e77232847178762973124b3d8c27627f620f Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:49:16 +0200
Subject: [PATCH 097/303] New translations aapsscreens.md (Polish)
---
.../pl/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/pl/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/pl/DailyLifeWithAaps/AapsScreens.md
index 133ad55bda7e..46c74c25d2af 100644
--- a/docs/CROWDIN/pl/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/pl/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ It is based on the expected drop in BG of the insulin in your system if no other
You can activate up to four additional graphs below the main graph. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### Kalkulator
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Calibrations
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Actions - section M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Button to start or cancel a temporary basal rate. Please note that the button changes from “TEMPBASAL” to “CANCEL x%” when a temporary basal rate is set.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* This option is only available for Dana RS and Insight pumps.
* Closed loop will automatically be stopped and switched to open loop mode for the time running extended bolus.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Careportal - section N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Careportal - section O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Prime/Fill allows you to record pump site and insulin cartridge change.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## History Browser
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From 992005c8161ba4c3c058c79f9d2ab9e148f04171 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:49:20 +0200
Subject: [PATCH 098/303] New translations keyaapsfeatures.md (Polish)
---
docs/CROWDIN/pl/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/pl/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/pl/DailyLifeWithAaps/KeyAapsFeatures.md
index 58633596725b..55caca43cc16 100644
--- a/docs/CROWDIN/pl/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/pl/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ For example, if the highest basal rate in your profile was 0.5 U/h you could mul
- Insulin-resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. It is different for ever
- Insulin resistant adult: 25
- Pregnant: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ If you have this option enabled, the insulin sensitivity will be decreased while
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). It will try and figure out how sensitive/resistant you are based on these deviations and adjust basal rate and ISF based on these deviations.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Insulin resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Maximum basal IOB OpenAPS can deliver \[U\] (OpenAPS "max-iob")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Insulin resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Enable AMA Autosens
From 9e0b6fa713022419f495f12adc3d55e2b63817aa Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:49:57 +0200
Subject: [PATCH 099/303] New translations devbranch.md (Polish)
---
docs/CROWDIN/pl/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/pl/AdvancedOptions/DevBranch.md b/docs/CROWDIN/pl/AdvancedOptions/DevBranch.md
index dd410c1dea17..5d180057f9e5 100644
--- a/docs/CROWDIN/pl/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/pl/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From 1284937bb7302933c7b72117562b41fa8fabf6c4 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:52:52 +0200
Subject: [PATCH 100/303] New translations diaconng8.md (Polish)
---
docs/CROWDIN/pl/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/pl/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/pl/CompatiblePumps/DiaconnG8.md
index bc512f6db641..46d88dc8da63 100644
--- a/docs/CROWDIN/pl/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/pl/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Extended Bolus function
- If you use extended bolus it will disable closed loop.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From 0656d73cc8b1d5c2738508a3840aec4984772ccd Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:52:57 +0200
Subject: [PATCH 101/303] New translations releasenotes.md (Polish)
---
docs/CROWDIN/pl/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/pl/Maintenance/ReleaseNotes.md b/docs/CROWDIN/pl/Maintenance/ReleaseNotes.md
index bbbdd10fc668..7e60aac500b8 100644
--- a/docs/CROWDIN/pl/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/pl/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Release date: 23-01-2021
- NSClient fixes
- Bolus advisor now works with Pumpcontrol and NSClient
+(version-2811)=
+
## Version 2.8.1.1
Release date: 12-01-2021
From 04aa2bba7a353b62b6ff2e8db2c7e62f7671c972 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:53:00 +0200
Subject: [PATCH 102/303] New translations automations.md (Polish)
---
docs/CROWDIN/pl/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/pl/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/pl/DailyLifeWithAaps/Automations.md
index 5f548fb2e1cd..b809cb1962ba 100644
--- a/docs/CROWDIN/pl/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/pl/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From 046bda0214fbe2357f8e6795da4bd42a074a900a Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:53:03 +0200
Subject: [PATCH 103/303] New translations extendedcarbs.md (Polish)
---
docs/CROWDIN/pl/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/pl/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/pl/DailyLifeWithAaps/ExtendedCarbs.md
index bbbb3c44d752..7f7d23f972c4 100644
--- a/docs/CROWDIN/pl/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/pl/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ A scenario e.g. for a Pizza might be to give a (partial) bolus up front via the
**Important notes:** You'll need to try out and see which concrete values work for you of course. You might also carefully adjust the setting *max minutes of basal to limit SMB to* to make the algorithm more or less aggressive. With low carb, high fat/protein meals it may be enough to only use eCarbs without manual boluses (see the blog post above). When eCarbs are generated, a Careportal note is also created to document all inputs, to make it easier to iterate and improve inputs.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Extended bolus and why they won't work in closed-loop environment?
As mentioned above extended or multiwave boluses do not really work in a closed loop environment. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ That's why as of version 2.6 there is an option for an extended bolus for users

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Why extended boluses won't work in a closed loop environment
1. The loop determines that now 1.55U/h is to be delivered. Whether this is delivered as an extended bolus or TBR does not matter to the algorithm. In fact, some of the pumps use the extended bolus. What should happen then? Most pump drivers then stop the extended bolus -> You didn't even need to start it.
From 0a16a9245cd9a72c14e032e448ae8761c23b3f18 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:53:42 +0200
Subject: [PATCH 104/303] New translations omnipoderos.md (Polish)
---
.../CROWDIN/pl/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/pl/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/pl/CompatiblePumps/OmnipodEros.md
index dd2fd8786302..6617cdbcb305 100644
--- a/docs/CROWDIN/pl/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/pl/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ On the **RileyLink Selection** screen press the **Scan** button and select your
Press the **Next** button to proceed with the rest of the **Setup Wizard.** It can take up to one minute for the selected RileyLink to initialize and the **Next** button to become active.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**OR**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via the top-left hand corner **hamburger menu** under **Config Builder (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. Selecting the **checkbox (4)** next to the **Settings Gear (3)** will display the Omnipod menu as a tab in the AAPS interface titled **POD**. This is referred to in this documentation as the **Omnipod (POD)** tab.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Please **swipe left** to the **Omnipod (POD)** tab where you will be able to man
### RileyLink Setup
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Note: A good visual indicator that the RileyLink is not connected is that the Insulin and Calculator buttons on the HOME tab will be missing. This will also occur for about the first 30 seconds after AAPS starts, as it is actively connecting to the RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. After selecting the Omnipod driver, identify and select your RileyLink from **Config Builder (1)** ➜**Pump**➜**Omnipod**➜**Gear Icon (Settings) (2)** ➜**RileyLink Configuration (3)** by pressing the **Not Set** or **MAC Address (if present)** text.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Before you can activate a pod please ensure you have properly configured and connected your RileyLink connection in the Omnipod settings
-*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigate to the **Omnipod (POD)** tab and click on the **POD MGMT (1)** button, and then click on **Activate Pod (2)**.
@@ -143,7 +143,7 @@ Before you can activate a pod please ensure you have properly configured and con
>
> Ensure the new pod and RileyLink are within close proximity of each other (~30cm or less) and click the **Next** button.
-03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Before you can activate a pod please ensure you have properly configured and con
Click on the back button on your phone to return to the **Omnipod (POD)** tab screen which will now display Pod information for your active pod session, including current basal rate, pod reservoir level, insulin delivered, pod errors and alerts.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
The process below will show you how to suspend and resume insulin pump delivery.
-*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspending Insulin Delivery
@@ -433,7 +433,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
- **Total delivered:** Displays the total number of units of insulin delivered from the reservoir. *Note this is an approximation as priming and filling the pod is not an exact process.*
-- **Errors:** Displays the last error encountered. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Errors:** Displays the last error encountered. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Active pod alerts:** Reserved for currently running alerts on the active pod. Normally used when pod expiration is past 72 hours and native pod beep alerts are running.
@@ -447,7 +447,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
>
> Use to refresh the pod status and dismiss status fields that contain the text (uncertain).
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From 2910295cfbf6389fbb25684a3d48aa55c92b86e0 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:53:58 +0200
Subject: [PATCH 105/303] New translations introduction.md (Polish)
---
docs/CROWDIN/pl/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/pl/Getting-Started/Introduction.md b/docs/CROWDIN/pl/Getting-Started/Introduction.md
index c7c99d98627f..589efeb25ee3 100644
--- a/docs/CROWDIN/pl/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/pl/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ The above table assumes that the user has access to both continuous gluocse moni
*All data from **AAPS** can be made available to healthcare professionals via data sharing platforms, including Nightscout that provides logging and real time monitoring of CGM data, insulin delivery, carbohydrate entries, predictions and settings. Nightscout records include daily and weekly reports which can aid healthcare professionals' discussions with type 1 patients with more accurate data on glycemic control and any behavioural considerations.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibility for users AAPS who are partially or completely blind
#### Day to day AAPS use:
From 7f254f06a11fd7c0891cd63f23efb84c00ec8479 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:53:59 +0200
Subject: [PATCH 106/303] New translations preparingforaaps.md (Polish)
---
docs/CROWDIN/pl/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/pl/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/pl/Getting-Started/PreparingForAaps.md
index 5bfd1c4195fe..67246110210b 100644
--- a/docs/CROWDIN/pl/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/pl/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ To aid the build process there are dedicated sections:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore & configuration settings export file
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Medical considerations
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulin choice
From 20297643cd6d7d4850001701e575eb5ae54ef185 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:56:28 +0200
Subject: [PATCH 107/303] New translations compatiblepumps.md (Polish)
---
docs/CROWDIN/pl/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/pl/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/pl/Getting-Started/CompatiblePumps.md
index 5dd27835c82c..a59ba099938e 100644
--- a/docs/CROWDIN/pl/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/pl/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From 713d142e8c035a1b0ff6ef2707c8587c046746e9 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:56:29 +0200
Subject: [PATCH 108/303] New translations compatiblescgms.md (Polish)
---
docs/CROWDIN/pl/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/pl/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/pl/Getting-Started/CompatiblesCgms.md
index 5253fce5cd34..2764c11c2b9c 100644
--- a/docs/CROWDIN/pl/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/pl/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| CGM | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From ca68adfb180d8ca519749a8bca14d108e12a4b26 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:57:34 +0200
Subject: [PATCH 109/303] New translations aapsscreens.md (Portuguese)
---
.../pt/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/pt/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/pt/DailyLifeWithAaps/AapsScreens.md
index fffb3ac80078..9e82486f86d2 100644
--- a/docs/CROWDIN/pt/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/pt/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ It is based on the expected drop in BG of the insulin in your system if no other
You can activate up to four additional graphs below the main graph. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### Calculadora
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Calibrations
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Actions - section M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Button to start or cancel a temporary basal rate. Please note that the button changes from “TEMPBASAL” to “CANCEL x%” when a temporary basal rate is set.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* This option is only available for Dana RS and Insight pumps.
* Closed loop will automatically be stopped and switched to open loop mode for the time running extended bolus.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Careportal - section N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Careportal - section O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Prime/Fill allows you to record pump site and insulin cartridge change.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## History Browser
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From ee0157cbc9877158be88b7abd0a8fdeee16e33a1 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:57:38 +0200
Subject: [PATCH 110/303] New translations keyaapsfeatures.md (Portuguese)
---
docs/CROWDIN/pt/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/pt/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/pt/DailyLifeWithAaps/KeyAapsFeatures.md
index 3824623319c8..98c1a6f06fd1 100644
--- a/docs/CROWDIN/pt/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/pt/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ For example, if the highest basal rate in your profile was 0.5 U/h you could mul
- Insulin-resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. It is different for ever
- Insulin resistant adult: 25
- Pregnant: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ If you have this option enabled, the insulin sensitivity will be decreased while
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). It will try and figure out how sensitive/resistant you are based on these deviations and adjust basal rate and ISF based on these deviations.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Adulto insulino-resistente: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Maximum basal IOB OpenAPS can deliver \[U\] (OpenAPS "max-iob")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Adulto insulino-resistente: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Enable AMA Autosens
From a4cd01340b642c990cfd21d7120288722c36c230 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 03:58:16 +0200
Subject: [PATCH 111/303] New translations devbranch.md (Portuguese)
---
docs/CROWDIN/pt/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/pt/AdvancedOptions/DevBranch.md b/docs/CROWDIN/pt/AdvancedOptions/DevBranch.md
index 9028e1caf8e2..ec07c9ea3d25 100644
--- a/docs/CROWDIN/pt/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/pt/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From 541de1ba85114dd8296fb9d0648b28c665010b2d Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:01:16 +0200
Subject: [PATCH 112/303] New translations diaconng8.md (Portuguese)
---
docs/CROWDIN/pt/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/pt/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/pt/CompatiblePumps/DiaconnG8.md
index bc512f6db641..46d88dc8da63 100644
--- a/docs/CROWDIN/pt/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/pt/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Extended Bolus function
- If you use extended bolus it will disable closed loop.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From a3d32ba526cb37c0e4922caa9ed666d53f8483fb Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:01:21 +0200
Subject: [PATCH 113/303] New translations releasenotes.md (Portuguese)
---
docs/CROWDIN/pt/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/pt/Maintenance/ReleaseNotes.md b/docs/CROWDIN/pt/Maintenance/ReleaseNotes.md
index 13cca042d6e5..2f63534b14c7 100644
--- a/docs/CROWDIN/pt/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/pt/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Data de lançamento: 23-01-2021
- NSClient fixes
- Bolus advisor now works with Pumpcontrol and NSClient
+(version-2811)=
+
## Version 2.8.1.1
Data de lançamento: 12-01-2021
From 42a3c9ecf558a44d4935609e33f014b33e5536f6 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:01:24 +0200
Subject: [PATCH 114/303] New translations automations.md (Portuguese)
---
docs/CROWDIN/pt/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/pt/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/pt/DailyLifeWithAaps/Automations.md
index 77c249276361..14f728e19660 100644
--- a/docs/CROWDIN/pt/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/pt/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From 66294c0fcf813dc7bb2f13aab53547c8939fece0 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:01:27 +0200
Subject: [PATCH 115/303] New translations extendedcarbs.md (Portuguese)
---
docs/CROWDIN/pt/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/pt/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/pt/DailyLifeWithAaps/ExtendedCarbs.md
index bbbb3c44d752..7f7d23f972c4 100644
--- a/docs/CROWDIN/pt/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/pt/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ A scenario e.g. for a Pizza might be to give a (partial) bolus up front via the
**Important notes:** You'll need to try out and see which concrete values work for you of course. You might also carefully adjust the setting *max minutes of basal to limit SMB to* to make the algorithm more or less aggressive. With low carb, high fat/protein meals it may be enough to only use eCarbs without manual boluses (see the blog post above). When eCarbs are generated, a Careportal note is also created to document all inputs, to make it easier to iterate and improve inputs.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Extended bolus and why they won't work in closed-loop environment?
As mentioned above extended or multiwave boluses do not really work in a closed loop environment. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ That's why as of version 2.6 there is an option for an extended bolus for users

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Why extended boluses won't work in a closed loop environment
1. The loop determines that now 1.55U/h is to be delivered. Whether this is delivered as an extended bolus or TBR does not matter to the algorithm. In fact, some of the pumps use the extended bolus. What should happen then? Most pump drivers then stop the extended bolus -> You didn't even need to start it.
From bedbdfec54bbbfb1060314b4dc1bd87edeb1b6c2 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:02:05 +0200
Subject: [PATCH 116/303] New translations omnipoderos.md (Portuguese)
---
.../CROWDIN/pt/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/pt/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/pt/CompatiblePumps/OmnipodEros.md
index 8cf01898b9b5..6399445251ac 100644
--- a/docs/CROWDIN/pt/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/pt/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ On the **RileyLink Selection** screen press the **Scan** button and select your
Press the **Next** button to proceed with the rest of the **Setup Wizard.** It can take up to one minute for the selected RileyLink to initialize and the **Next** button to become active.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**OR**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via the top-left hand corner **hamburger menu** under **Config Builder (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. Selecting the **checkbox (4)** next to the **Settings Gear (3)** will display the Omnipod menu as a tab in the AAPS interface titled **POD**. This is referred to in this documentation as the **Omnipod (POD)** tab.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Please **swipe left** to the **Omnipod (POD)** tab where you will be able to man
### RileyLink Setup
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Note: A good visual indicator that the RileyLink is not connected is that the Insulin and Calculator buttons on the HOME tab will be missing. This will also occur for about the first 30 seconds after AAPS starts, as it is actively connecting to the RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. After selecting the Omnipod driver, identify and select your RileyLink from **Config Builder (1)** ➜**Pump**➜**Omnipod**➜**Gear Icon (Settings) (2)** ➜**RileyLink Configuration (3)** by pressing the **Not Set** or **MAC Address (if present)** text.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Before you can activate a pod please ensure you have properly configured and connected your RileyLink connection in the Omnipod settings
-*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigate to the **Omnipod (POD)** tab and click on the **POD MGMT (1)** button, and then click on **Activate Pod (2)**.
@@ -143,7 +143,7 @@ Before you can activate a pod please ensure you have properly configured and con
>
> Ensure the new pod and RileyLink are within close proximity of each other (~30cm or less) and click the **Next** button.
-03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Before you can activate a pod please ensure you have properly configured and con
Click on the back button on your phone to return to the **Omnipod (POD)** tab screen which will now display Pod information for your active pod session, including current basal rate, pod reservoir level, insulin delivered, pod errors and alerts.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
The process below will show you how to suspend and resume insulin pump delivery.
-*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspending Insulin Delivery
@@ -433,7 +433,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
- **Total delivered:** Displays the total number of units of insulin delivered from the reservoir. *Note this is an approximation as priming and filling the pod is not an exact process.*
-- **Errors:** Displays the last error encountered. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Errors:** Displays the last error encountered. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Active pod alerts:** Reserved for currently running alerts on the active pod. Normally used when pod expiration is past 72 hours and native pod beep alerts are running.
@@ -447,7 +447,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
>
> Use to refresh the pod status and dismiss status fields that contain the text (uncertain).
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From 17546198a8d203090b8ed1d48ddc5300711da6dd Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:02:21 +0200
Subject: [PATCH 117/303] New translations introduction.md (Portuguese)
---
docs/CROWDIN/pt/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/pt/Getting-Started/Introduction.md b/docs/CROWDIN/pt/Getting-Started/Introduction.md
index c7c99d98627f..589efeb25ee3 100644
--- a/docs/CROWDIN/pt/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/pt/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ The above table assumes that the user has access to both continuous gluocse moni
*All data from **AAPS** can be made available to healthcare professionals via data sharing platforms, including Nightscout that provides logging and real time monitoring of CGM data, insulin delivery, carbohydrate entries, predictions and settings. Nightscout records include daily and weekly reports which can aid healthcare professionals' discussions with type 1 patients with more accurate data on glycemic control and any behavioural considerations.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibility for users AAPS who are partially or completely blind
#### Day to day AAPS use:
From 90fbe33b6b7589453f1a76dc4de20b395408d802 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:02:22 +0200
Subject: [PATCH 118/303] New translations preparingforaaps.md (Portuguese)
---
docs/CROWDIN/pt/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/pt/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/pt/Getting-Started/PreparingForAaps.md
index d1369a44a68a..04b55e952ad6 100644
--- a/docs/CROWDIN/pt/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/pt/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ To aid the build process there are dedicated sections:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore & configuration settings export file
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Medical considerations
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulin choice
From 0d6a288e648a9a46b1913106fffff65ef5d219da Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:04:53 +0200
Subject: [PATCH 119/303] New translations compatiblepumps.md (Portuguese)
---
docs/CROWDIN/pt/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/pt/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/pt/Getting-Started/CompatiblePumps.md
index 5dd27835c82c..a59ba099938e 100644
--- a/docs/CROWDIN/pt/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/pt/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From b9f654bba8142d3afc967a690e287d7f0f4dbc01 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:04:55 +0200
Subject: [PATCH 120/303] New translations compatiblescgms.md (Portuguese)
---
docs/CROWDIN/pt/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/pt/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/pt/Getting-Started/CompatiblesCgms.md
index 5253fce5cd34..2764c11c2b9c 100644
--- a/docs/CROWDIN/pt/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/pt/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| CGM | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From 3e675fbff36c2ee234dd4041c82584c25eb85821 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:06:03 +0200
Subject: [PATCH 121/303] New translations aapsscreens.md (Russian)
---
.../ru/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/ru/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/ru/DailyLifeWithAaps/AapsScreens.md
index 11847db06b12..23f2e4dfead3 100644
--- a/docs/CROWDIN/ru/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/ru/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@
* Между экранами также можно переходить свайпом влево или вправо.
* Видимые вкладки можно выбрать в [Конфигураторе](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Раздел B - Профиль & Цель
#### Текущий профиль
@@ -295,7 +297,7 @@
Можно активировать до четырех дополнительных графиков ниже главного графика. В [Простом режиме](#preferences-simple-mode)дополнительные графики предустановлены и не могут быть изменены. Выключите **Простой режим**, если хотите установить собственную конфигурацию дополнительных графиков.
-Чтобы настроить дополнительные графики щелкните по маленькомутреугольнику справа от [главного](#section-f---main-graph) и прокрутите вниз.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ Buttons for Insulin and Carbs are almost always visible. If the connection to th

-Чтобы ввести заданное количество инсулина без использования [калькулятора болюса](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
Можно автоматически начать временную цель TT **Ожидаемый прием пищи**, поставив флажок рядом с опцией [Начать ВЦ ожидаемый прием пищи](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ The insulin button can be used when the pump is suspended as well, i.e. to recor
#### Калькулятор
-Смотрите раздел Мастер болюса [ниже](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Калибровки
@@ -503,18 +505,20 @@ The insulin button can be used when the pump is suspended as well, i.e. to recor
### Действия-раздел M
-Кнопка **[Смена профиля](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** является альтернативой нажатию на [текущий профиль](#section-b---profile--target) на главном экране.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Кнопка **[Временная цель](../DailyLifeWithAaps/TempTargets.md)** - альтернатива нажатию на [текущую цель](#section-b---profile--target) на главном экране.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Кнопка начала или отмены временного базала. Обратите внимание, что кнопка меняется с “TEMPBASAL” (ВРЕМБАЗАЛ) на “CANCEL x%” (ОТМЕНА х%), после начала действия.
-Несмотря на то, что [пролонгированные болюсы](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) не работают в замкнутом цикле, некоторые всё равно просили оставить эту опцию.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* Эта опция доступна только для помпDana RS и Insight.
* Замкнутый цикл автоматически будет остановлен и переключится на режим открытого цикла на время пролонгированных болюсов.
* Убедитесь, что ознакомились с [подробностями](../DailyLifeWithAaps/ExtendedCarbs.md) перед использованием этой опции.
+(aaps-screens-careportal)=
+
### Портал терапии-раздел N
Отображает информацию о:
@@ -536,7 +540,7 @@ The insulin button can be used when the pump is suspended as well, i.e. to recor
### Портал терапии-раздел О
-Контроль ГК, заполнение инфузионного набора, установка сенсора и замена батареи помпы - основные данные в [разделе N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Кнопка Заполнение инфузионного набора позволяет регистрировать смену места катетера помпы, а также замену картриджа инсулина.
@@ -647,7 +651,7 @@ This shows the activity profile of the insulin you have chosen in [Config builde
* Прием пищи (вручную введенный кнопками Insulin, Quick Wizard или Bolus Wizard)
* Микроболюсы SMB, при включенной опции подачи микроболюсов
-Углеводы (строка **2**) хранятся только в Nightscout. Если вы пользовались Помощником болюса [](#bolus-wizard) для вычисления инсулина, то можете нажать на текст «Calc» (строка **3**) и увидеть детали расчета.
+Углеводы (строка **2**) хранятся только в Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
В зависимости от используемой помпы инсулин и углеводов могут быть показаны на одной строке или на нескольких - для углеводов и для собственно болюса.
@@ -702,7 +706,7 @@ This shows the activity profile of the insulin you have chosen in [Config builde
## Просмотр журнала
-Доступ к этому экрану можно получить нажатием трех точек справа от меню, затем - Просмотр журнала. Его невозможно показать в главном меню через Конфигуратор. Доступ к нему также можно получить через кнопку в нижней части вкладки [Действия](#action-tab).
+Доступ к этому экрану можно получить нажатием трех точек справа от меню, затем - Просмотр журнала. Его невозможно показать в главном меню через Конфигуратор. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Позволяет перемещаться по журналу **AAPS**. См соответствующую страницу - [ Просмотр данных > Журнал истории](../Maintenance/Reviewing.md).
From 8c5ca36772bd0b3267e08b6c696f9ff60e5f7953 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:06:06 +0200
Subject: [PATCH 122/303] New translations keyaapsfeatures.md (Russian)
---
docs/CROWDIN/ru/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/ru/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/ru/DailyLifeWithAaps/KeyAapsFeatures.md
index 789b69cf24d5..6b9a9438662b 100644
--- a/docs/CROWDIN/ru/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/ru/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ The settings for OpenAPS SMB are described below.
- Инсулинорезистентный взрослый: 12
- Беременная: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. Эта величина
- Инсулинорезистентный взрослый: 25
- Беременная: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ This is the [DynamicISF](../DailyLifeWithAaps/DynamicISF.md) feature. When enabl
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). На основе отклонений он пытается выяснить, насколько вы чувствительны/резистентны к инсулину и корректирует базальную скорость и коэффициент чувствительности к инсулину ISF.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Инсулинорезистентный взрослый: 12
- Беременная: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Максимальное общее количество активного инсулина IOB (ед.), которое не может превысить OpenAPS ("max-iob" в OpenAPS)
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Инсулинорезистентный взрослый: 12
- Беременная: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Включить autosense помощника болюса AMA
From a39e00f8271338666472cd745f1de1675e41473d Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:06:47 +0200
Subject: [PATCH 123/303] New translations devbranch.md (Russian)
---
docs/CROWDIN/ru/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/ru/AdvancedOptions/DevBranch.md b/docs/CROWDIN/ru/AdvancedOptions/DevBranch.md
index ecff1a8029fd..e33fb5bd9250 100644
--- a/docs/CROWDIN/ru/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/ru/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From 9648670edcc351c92637945de02598d424a60b88 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:09:41 +0200
Subject: [PATCH 124/303] New translations diaconng8.md (Russian)
---
docs/CROWDIN/ru/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/ru/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/ru/CompatiblePumps/DiaconnG8.md
index e04021189fb4..05ae80470630 100644
--- a/docs/CROWDIN/ru/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/ru/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Функция пролонгированного (расширенного) болюса
- Если вы пользуетесь пролонгированным болюсом, замкнутый цикл будет деактивирован.
-- [На этой странице](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) приведена подробная информация о том, почему расширенный болюс не работает в условиях замкнутого цикла.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From 8b526395e888d08eb8165a77381a00f60addd1e1 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:09:47 +0200
Subject: [PATCH 125/303] New translations releasenotes.md (Russian)
---
docs/CROWDIN/ru/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/ru/Maintenance/ReleaseNotes.md b/docs/CROWDIN/ru/Maintenance/ReleaseNotes.md
index 676cf4ec47b9..2cdbe4fefad8 100644
--- a/docs/CROWDIN/ru/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/ru/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ v3 - новый протокол. Более безопасный и эффек
- Исправления для NSClient
- Помощник болюса теперь работает с Pumpcontrol и NSClient
+(version-2811)=
+
## Версия 2.8.1.1
Дата выпуска: 12-01-2021
From 0bfaad80ddbe6b2eeef5601a30ddf255f229e98d Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:09:50 +0200
Subject: [PATCH 126/303] New translations automations.md (Russian)
---
docs/CROWDIN/ru/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/ru/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/ru/DailyLifeWithAaps/Automations.md
index 2d8637016947..970813fac58c 100644
--- a/docs/CROWDIN/ru/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/ru/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Note that for all age related triggers the equal comparison is unlikely to trigg

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From 3e80cde39f76ce76627d628afcb166a3693526f7 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:09:52 +0200
Subject: [PATCH 127/303] New translations extendedcarbs.md (Russian)
---
docs/CROWDIN/ru/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/ru/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/ru/DailyLifeWithAaps/ExtendedCarbs.md
index 0a72bbe139be..8c987a774674 100644
--- a/docs/CROWDIN/ru/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/ru/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ ______________________________________________________________________
**Важное замечание:** Нужно попробовать и посмотреть, какие конкретные значения подходят именно вам, конечно. Можно также подстроить параметр *max minutes of basal для ограничения SMB*, тем самым делая алгоритм более (менее) агрессивным. При низком содержании углеводов, высоким содержании жиров и белков, eCarbs может быть достаточен, чтобы обойтись без дополнительного контроля болюсов (см. пост блога выше). При создании eCarbs в портале терапии создается также запись для документирования, упрощающая итерацию и ввод данных.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Пролонгированный болюс и почему он не будет работать в среде замкнутого цикла?
Как упоминалось выше, пролонгированные или многоволновые болизы не работают в замкнутом цикле. Подробнее [см. ниже](#why-extended-boluses-wont-work-in-a-closed-loop-environment)
@@ -53,7 +53,7 @@ ______________________________________________________________________

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Почему пролонгированные болюсы не будут работать в среде замкнутого цикла
1. Цикл определяет, что скорость базала должна быть 1.55 ед/ч. Для алгоритма неважно, подается при этом пролонгированный болюс или обычный временный базал TBR. На самом деле, на некоторых помпах возможен пролонгированный болюс. Что должно произойти в этом случае? Большинство драйверов помп останавливает пролонгированный болюс-> Можно было даже не пытаться его запустить.
From 883e5e3dc39aaa2fa0ab3f4acf01efc972af0854 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:10:32 +0200
Subject: [PATCH 128/303] New translations omnipoderos.md (Russian)
---
.../CROWDIN/ru/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/ru/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/ru/CompatiblePumps/OmnipodEros.md
index 8508427abf95..ed8a9823ccef 100644
--- a/docs/CROWDIN/ru/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/ru/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ orphan: true
Нажмите кнопку **Далее**, чтобы перейти к остальной части **мастера настройки** Для инициализации выбранного устройства RileyLink может потребоваться до минуты, после чего кнопка **Далее** станет активной.
-Подробные шаги по настройке устройства связи Pod приведены ниже в разделе [Настройка RileyLink](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**ИЛИ**
@@ -77,7 +77,7 @@ orphan: true
В левом верхнем углу из **выпадающего меню** выберите **Конфигуратор(1)** ➜**Помпа** ➜ **Omnipod**, включив **радио кнопку(2)** под названием **Omnipod**. Поставив **флажок(4)** напротив **шестеренки настроек(3)** вы активируете вкладку меню Omnipod в интерфейсе AAPS, которая называется **POD**. В документации эта вкладка называется **Omnipod (POD)**.
-> **ПРИМЕЧАНИЕ:** Более быстрый способ доступа к настройкам **Omnipod** можно найти ниже в разделе [Omnipod Settings](#omnipod-settings) этого документа.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ orphan: true
### Настройка RileyLink
-Если RileyLink был успешно сопряжен в мастере установки или на шагах выше, то перейдите к разделу [активации Pod](#activating-a-pod) ниже.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Примечание: Визуальным индикатором того, что RileyLink не подключен, является то, что на главном экране не появятся кнопки инсуллина и калькулятора болюса. Это произойдет примерно в течение первых 30 секунд после запуска AAPS, так как он активно подключается к RileyLink.*
@@ -109,7 +109,7 @@ orphan: true
2. После выбора драйвера Omnipod, определите и выберите RileyLink в **Конфигураторе (1)** ➜**Помпа**➜**Omnipod**➜**Иконка шестеренки (Настройки) (2)** ➜**Конфигурация RileyLink (3)**, нажав на текст**Не настроен** или **Адрес MAC (если есть)**.
- > Убедитесь, что аккумулятор RileyLink заряжен и он [расположен в непосредственной близости от](#optimal-omnipod-and-rileylink-positioning) (~30 см или менее от телефона) для идентификации AAPS по его MAC-адресу. Сделав выбор, можете перейти к активации первого сеанса Pod. Нажмите кнопку "Назад" на телефоне, чтобы вернуться к основному интерфейсу AAPS.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Сделав выбор, можете перейти к активации первого сеанса Pod. Нажмите кнопку "Назад" на телефоне, чтобы вернуться к основному интерфейсу AAPS.
>
>  
@@ -131,7 +131,7 @@ orphan: true
Перед активацией Pod убедитесь, что вы правильно настроили и подключили RileyLink в настройках Omnipod
-*ПРЕДУПРЕЖДЕНИЕ: Коммуникация для активации Pod происходит на ограниченной дистанции, что вызвано мерами безопасности. Перед сопряжением радиосигнал Pod более слабый, однако после подключения связь будет работать при полной мощности сигнала. В ходе этих процедур убедитесь, что Pod* [находится в непосредственной близости ](#optimal-omnipod-and-rileylink-positioning) (~30 см или менее), но не поверх или совсем рядом с RileyLink.\*
+*ПРЕДУПРЕЖДЕНИЕ: Коммуникация для активации Pod происходит на ограниченной дистанции, что вызвано мерами безопасности. Перед сопряжением радиосигнал Pod более слабый, однако после подключения связь будет работать при полной мощности сигнала. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Перейдите на вкладку **Omnipod (POD)**, нажмите кнопку **УПРАВЛЕНИЕ помпой (1)**, затем нажмите **Активировать Pod (2)**.
@@ -143,7 +143,7 @@ orphan: true
>
> Убедитесь, что новый Pod и телефон с запущенным AAPS находятся в непосредственной близости друг от друга и нажмите кнопку **Далее**.
-03. На экране **Инициализация Pod**, Pod начнет первичное заполнение ( вы услышите щелчок с серией последующих тикающих звуков пока заполняется под). Если RileyLink при активации находится вне диапазона, вы получите сообщение об ошибке **Нет ответа от Pod**. Если это происходит, переместите RileyLink ближе (30 см или менее) но не поверх или совсем рядом с Pod и нажмите кнопку **Повторить**.
+03. На экране **Инициализация Pod**, Pod начнет первичное заполнение ( вы услышите щелчок с серией последующих тикающих звуков пока заполняется под). Если RileyLink при активации находится вне диапазона, вы получите сообщение об ошибке **Нет ответа от Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ orphan: true
Нажмите на кнопку Назад на телефоне, чтобы вернуться на вкладку **Omnipod (POD)**, которая теперь отображает текущую информацию с Pod, включая скорость базала, заполненность резервуара, введенный инсулин, ошибки и предупреждения.
- Более подробно о показываемой информации в разделе [](#omnipod-pod-tab)Вкладка Omnipod (POD) этого документа.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
Приведенный ниже процесс покажет вам, как приостановить и возобновить подачу инсулина.
-*ПРИМЕЧАНИЕ - если вы не видите кнопку ПРИОСТАНОВИТЬ*, то отображение функции не было включено на вкладке Omnipod (POD). Включите кнопку **Показать приостановку введения инсулина на вкладке Omnipod** в настройках [Omnipod](#omnipod-settings) в разделе **Разное**.
+*ПРИМЕЧАНИЕ - если вы не видите кнопку ПРИОСТАНОВИТЬ*, то отображение функции не было включено на вкладке Omnipod (POD). Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Приостановка подачи инсулина
@@ -433,7 +433,7 @@ Use this command to instruct the active, currently suspended pod to resume insul
- **Всего подано** Отображает общее количество единиц инсулина, доставленных из резервуара. *Обратите внимание, что это приблизительная величина, поскольку первичное заполнение POD не является точным процессом.*
-- **Ошибки:** Отображает последнюю возникшую ошибку. Ознакомьтесь с версией [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) и лог-файлами для более подробной информации.
+- **Ошибки:** Отображает последнюю возникшую ошибку. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Активные оповещения Pod** зарезервировано для текущих оповещений на активном Pod. Обычно используется при истечении срока действия pod последние 72 часа, а звуковые оповещения работают.
@@ -447,7 +447,7 @@ Use this command to instruct the active, currently suspended pod to resume insul
>
> Используйте для обновления статуса pod и сброса полей статуса, содержащих текст (не подтверждено).
>
- > Дополнительную информацию см. в разделе [Устранение неполадок](#troubleshooting) ниже.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **УПРАВЛЕНИЕ ПОМПОЙ:**
From d43d46c740ec409356d006b4d7e778199fa0460b Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:10:47 +0200
Subject: [PATCH 129/303] New translations introduction.md (Russian)
---
docs/CROWDIN/ru/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/ru/Getting-Started/Introduction.md b/docs/CROWDIN/ru/Getting-Started/Introduction.md
index 2d6c25d993c6..952a5f2cba98 100644
--- a/docs/CROWDIN/ru/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/ru/Getting-Started/Introduction.md
@@ -365,6 +365,8 @@ David Burren [https://bionicwookie.com/](https://bionicwookie.com/)
*Все данные **AAPS** могут быть предоставлены медицинским специалистам через платформы обмена данными, включая NightScout, который обеспечивает журналирование и мониторинг CGM в реальном времени, включая введение инсулина, потребление углеводов, прогнозы и настройки. Записи Nightscout включают ежедневные и еженедельные отчеты, которые могут помочь специалистам здравоохранения обсудить с пациентами диабета первого типа все мероприятия по компенсации и контролю диабета.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Специальные возможности для пользователей AAPS, частично или полностью незрячих
From e361bca8f6ae9b14e4878f733c5463d48413b689 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:10:48 +0200
Subject: [PATCH 130/303] New translations preparingforaaps.md (Russian)
---
docs/CROWDIN/ru/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/ru/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/ru/Getting-Started/PreparingForAaps.md
index e1b901a47572..b7fd01a779cb 100644
--- a/docs/CROWDIN/ru/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/ru/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ In a nutshell:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Хранилище ключей & файл экспорта настроек конфигурации
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Медицинские соображения
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Выбор инсулина
From c6da42e95394ddf253fe579716f2d2ebbcd0051f Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:13:21 +0200
Subject: [PATCH 131/303] New translations compatiblepumps.md (Russian)
---
docs/CROWDIN/ru/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/ru/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/ru/Getting-Started/CompatiblePumps.md
index 469291356a0b..3ae2b57e5255 100644
--- a/docs/CROWDIN/ru/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/ru/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS работает с целым рядом инсулиновых помп.
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) (необходимо [дополнительное устройство для связи](#additional-communication-device))
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Некоторые старые [Medtronic](../CompatiblePumps/MedtronicPump.md) (необходимо [дополнительное устройство для связи](#additional-communication-device))
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From e9126de037c5d42cbf756eff8a125c673d492045 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:13:22 +0200
Subject: [PATCH 132/303] New translations compatiblescgms.md (Russian)
---
docs/CROWDIN/ru/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/ru/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/ru/Getting-Started/CompatiblesCgms.md
index 72c63f89b828..85ecd8787497 100644
--- a/docs/CROWDIN/ru/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/ru/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@
* [Настройки xDrip+](../CompatibleCgms/xDrip.md)
* [Nightscout как источник СК](../CompatibleCgms/CgmNightscoutUpload.md): Хотя использовать Nightscout в качестве источника СК для замкнутого цикла возможно, **этот метод использовать не рекомендуется** из-за того, что он полагается на стабильность мобильного интернета или Wi-Fi. Это означает, что данные с вашего **НМГ** будут приниматься **AAPS** только лишь при наличии соединения с вашим сайтом Nightscout. В качестве более надежной конфигурации рекомендуется использовать НМГ с локальной трансляцией в **AAPS** из источников, описанных ниже.
-| CGM / НМГ | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM / НМГ | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip +](../CompatibleCgms/xDrip.md) |
From 647ff16a2466457f440ab9a11a1725464743ef25 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:14:31 +0200
Subject: [PATCH 133/303] New translations aapsscreens.md (Slovak)
---
.../sk/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/sk/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/sk/DailyLifeWithAaps/AapsScreens.md
index a3e7929bb79b..2bfbd3d1082e 100644
--- a/docs/CROWDIN/sk/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/sk/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ It is based on the expected drop in BG of the insulin in your system if no other
You can activate up to four additional graphs below the main graph. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### Calculator
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Calibrations
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Actions - section M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Button to start or cancel a temporary basal rate. Please note that the button changes from “TEMPBASAL” to “CANCEL x%” when a temporary basal rate is set.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* This option is only available for Dana RS and Insight pumps.
* Closed loop will automatically be stopped and switched to open loop mode for the time running extended bolus.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Careportal - section N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Careportal - section O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Prime/Fill allows you to record pump site and insulin cartridge change.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## History Browser
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From 7c3f65dbbb6805f9e3ec7c44c2a8d0273eb2b720 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:14:35 +0200
Subject: [PATCH 134/303] New translations keyaapsfeatures.md (Slovak)
---
docs/CROWDIN/sk/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/sk/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/sk/DailyLifeWithAaps/KeyAapsFeatures.md
index 58633596725b..55caca43cc16 100644
--- a/docs/CROWDIN/sk/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/sk/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ For example, if the highest basal rate in your profile was 0.5 U/h you could mul
- Insulin-resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. It is different for ever
- Insulin resistant adult: 25
- Pregnant: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ If you have this option enabled, the insulin sensitivity will be decreased while
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). It will try and figure out how sensitive/resistant you are based on these deviations and adjust basal rate and ISF based on these deviations.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Insulin resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Maximum basal IOB OpenAPS can deliver \[U\] (OpenAPS "max-iob")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Insulin resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Enable AMA Autosens
From b0d3c3378c875d6d99c3566c946ee1ffd2f41b63 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:15:13 +0200
Subject: [PATCH 135/303] New translations devbranch.md (Slovak)
---
docs/CROWDIN/sk/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/sk/AdvancedOptions/DevBranch.md b/docs/CROWDIN/sk/AdvancedOptions/DevBranch.md
index dd410c1dea17..5d180057f9e5 100644
--- a/docs/CROWDIN/sk/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/sk/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From 61a259f7cfe0e94ce131d9751dc3631a18916d25 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:18:09 +0200
Subject: [PATCH 136/303] New translations diaconng8.md (Slovak)
---
docs/CROWDIN/sk/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/sk/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/sk/CompatiblePumps/DiaconnG8.md
index bc512f6db641..46d88dc8da63 100644
--- a/docs/CROWDIN/sk/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/sk/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Extended Bolus function
- If you use extended bolus it will disable closed loop.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From a98ba33dc791cbb709a64f14ece880174075e646 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:18:14 +0200
Subject: [PATCH 137/303] New translations releasenotes.md (Slovak)
---
docs/CROWDIN/sk/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/sk/Maintenance/ReleaseNotes.md b/docs/CROWDIN/sk/Maintenance/ReleaseNotes.md
index 78534579cc99..7d720070e53d 100644
--- a/docs/CROWDIN/sk/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/sk/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Release date: 23-01-2021
- NSClient fixes
- Bolus advisor now works with Pumpcontrol and NSClient
+(version-2811)=
+
## Version 2.8.1.1
Release date: 12-01-2021
From e1c3ca35c90eabc3cc1e9a7572b961e0184c66f0 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:18:18 +0200
Subject: [PATCH 138/303] New translations automations.md (Slovak)
---
docs/CROWDIN/sk/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/sk/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/sk/DailyLifeWithAaps/Automations.md
index 5f548fb2e1cd..b809cb1962ba 100644
--- a/docs/CROWDIN/sk/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/sk/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From d05d6208bc0e71421e47415c43115b06d16571a4 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:18:21 +0200
Subject: [PATCH 139/303] New translations extendedcarbs.md (Slovak)
---
docs/CROWDIN/sk/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/sk/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/sk/DailyLifeWithAaps/ExtendedCarbs.md
index bbbb3c44d752..7f7d23f972c4 100644
--- a/docs/CROWDIN/sk/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/sk/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ A scenario e.g. for a Pizza might be to give a (partial) bolus up front via the
**Important notes:** You'll need to try out and see which concrete values work for you of course. You might also carefully adjust the setting *max minutes of basal to limit SMB to* to make the algorithm more or less aggressive. With low carb, high fat/protein meals it may be enough to only use eCarbs without manual boluses (see the blog post above). When eCarbs are generated, a Careportal note is also created to document all inputs, to make it easier to iterate and improve inputs.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Extended bolus and why they won't work in closed-loop environment?
As mentioned above extended or multiwave boluses do not really work in a closed loop environment. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ That's why as of version 2.6 there is an option for an extended bolus for users

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Why extended boluses won't work in a closed loop environment
1. The loop determines that now 1.55U/h is to be delivered. Whether this is delivered as an extended bolus or TBR does not matter to the algorithm. In fact, some of the pumps use the extended bolus. What should happen then? Most pump drivers then stop the extended bolus -> You didn't even need to start it.
From 99c4faddb2d291f0d625a3498f2d3cfed19045f3 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:18:59 +0200
Subject: [PATCH 140/303] New translations omnipoderos.md (Slovak)
---
.../CROWDIN/sk/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/sk/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/sk/CompatiblePumps/OmnipodEros.md
index dd2fd8786302..6617cdbcb305 100644
--- a/docs/CROWDIN/sk/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/sk/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ On the **RileyLink Selection** screen press the **Scan** button and select your
Press the **Next** button to proceed with the rest of the **Setup Wizard.** It can take up to one minute for the selected RileyLink to initialize and the **Next** button to become active.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**OR**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via the top-left hand corner **hamburger menu** under **Config Builder (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. Selecting the **checkbox (4)** next to the **Settings Gear (3)** will display the Omnipod menu as a tab in the AAPS interface titled **POD**. This is referred to in this documentation as the **Omnipod (POD)** tab.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Please **swipe left** to the **Omnipod (POD)** tab where you will be able to man
### RileyLink Setup
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Note: A good visual indicator that the RileyLink is not connected is that the Insulin and Calculator buttons on the HOME tab will be missing. This will also occur for about the first 30 seconds after AAPS starts, as it is actively connecting to the RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. After selecting the Omnipod driver, identify and select your RileyLink from **Config Builder (1)** ➜**Pump**➜**Omnipod**➜**Gear Icon (Settings) (2)** ➜**RileyLink Configuration (3)** by pressing the **Not Set** or **MAC Address (if present)** text.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Before you can activate a pod please ensure you have properly configured and connected your RileyLink connection in the Omnipod settings
-*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigate to the **Omnipod (POD)** tab and click on the **POD MGMT (1)** button, and then click on **Activate Pod (2)**.
@@ -143,7 +143,7 @@ Before you can activate a pod please ensure you have properly configured and con
>
> Ensure the new pod and RileyLink are within close proximity of each other (~30cm or less) and click the **Next** button.
-03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Before you can activate a pod please ensure you have properly configured and con
Click on the back button on your phone to return to the **Omnipod (POD)** tab screen which will now display Pod information for your active pod session, including current basal rate, pod reservoir level, insulin delivered, pod errors and alerts.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
The process below will show you how to suspend and resume insulin pump delivery.
-*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspending Insulin Delivery
@@ -433,7 +433,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
- **Total delivered:** Displays the total number of units of insulin delivered from the reservoir. *Note this is an approximation as priming and filling the pod is not an exact process.*
-- **Errors:** Displays the last error encountered. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Errors:** Displays the last error encountered. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Active pod alerts:** Reserved for currently running alerts on the active pod. Normally used when pod expiration is past 72 hours and native pod beep alerts are running.
@@ -447,7 +447,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
>
> Use to refresh the pod status and dismiss status fields that contain the text (uncertain).
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From 63f0ac2020af71d8422fc108ee2928d123b6cac0 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:19:14 +0200
Subject: [PATCH 141/303] New translations introduction.md (Slovak)
---
docs/CROWDIN/sk/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/sk/Getting-Started/Introduction.md b/docs/CROWDIN/sk/Getting-Started/Introduction.md
index c7c99d98627f..589efeb25ee3 100644
--- a/docs/CROWDIN/sk/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/sk/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ The above table assumes that the user has access to both continuous gluocse moni
*All data from **AAPS** can be made available to healthcare professionals via data sharing platforms, including Nightscout that provides logging and real time monitoring of CGM data, insulin delivery, carbohydrate entries, predictions and settings. Nightscout records include daily and weekly reports which can aid healthcare professionals' discussions with type 1 patients with more accurate data on glycemic control and any behavioural considerations.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibility for users AAPS who are partially or completely blind
#### Day to day AAPS use:
From 04d06a4967aab2ba551b03f3b1301ae8f1a9d87a Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:19:16 +0200
Subject: [PATCH 142/303] New translations preparingforaaps.md (Slovak)
---
docs/CROWDIN/sk/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/sk/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/sk/Getting-Started/PreparingForAaps.md
index 5bfd1c4195fe..67246110210b 100644
--- a/docs/CROWDIN/sk/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/sk/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ To aid the build process there are dedicated sections:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore & configuration settings export file
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Medical considerations
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulin choice
From edb6a33053598156dc6f0c52d40e6ab3e885c223 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:21:44 +0200
Subject: [PATCH 143/303] New translations compatiblepumps.md (Slovak)
---
docs/CROWDIN/sk/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/sk/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/sk/Getting-Started/CompatiblePumps.md
index 5dd27835c82c..a59ba099938e 100644
--- a/docs/CROWDIN/sk/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/sk/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From 9a18632d394269ba0813440ebe60857096587079 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:21:45 +0200
Subject: [PATCH 144/303] New translations compatiblescgms.md (Slovak)
---
docs/CROWDIN/sk/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/sk/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/sk/Getting-Started/CompatiblesCgms.md
index 5253fce5cd34..2764c11c2b9c 100644
--- a/docs/CROWDIN/sk/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/sk/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| CGM | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From c30e14a9574a41d96b21606be4b63a3e8049228e Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:22:50 +0200
Subject: [PATCH 145/303] New translations aapsscreens.md (Turkish)
---
.../tr/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/tr/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/tr/DailyLifeWithAaps/AapsScreens.md
index 1e4f956eb765..0bd5a86a6243 100644
--- a/docs/CROWDIN/tr/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/tr/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ Başka hiçbir faktör (karbonhidrat gibi) mevcut değilse, sisteminizdeki insü
Ana grafiğin altında en fazla dört ek grafik etkinleştirebilirsiniz. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### Hesap makinesi
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Kalibrasyonlar
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Eylemler - bölüm M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Geçici bir bazal oranı başlatma veya iptal etme düğmesi. Geçici bir bazal oranı ayarlandığında düğmenin "GEÇICIBAZAL" yerine "İPTAL x%" olarak değiştiğini lütfen unutmayın.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* Bu seçenek yalnızca Dana RS ve Insight pompaları için mevcuttur.
* Kapalı döngü otomatik olarak durdurulacak ve yayma bolus çalıştığı süre boyunca açık döngü moduna geçecektir.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Bakım portalı - bölüm N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Bakım portalı - bölüm O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Hazırlama/Doldurma, pompa set değişimi, insülin kartuş değişimi ve sensör değişimini kaydetmenizi sağlar.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## Geçmiş Tarayıcısı
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From 1176ac960ab5d2a59b3739d3340cfd2886384a83 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:22:53 +0200
Subject: [PATCH 146/303] New translations keyaapsfeatures.md (Turkish)
---
docs/CROWDIN/tr/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/tr/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/tr/DailyLifeWithAaps/KeyAapsFeatures.md
index 83d9d9cd857c..631c3e02cf50 100644
--- a/docs/CROWDIN/tr/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/tr/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ Değer, ünite/saat (Ü/s) cinsinden ölçülür. It is advised to set this to s
- İnsüline dirençli yetişkin: 12
- Hamile: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. It is different for ever
- İnsüline dirençli yetişkin: 25
- Hamile: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ If you have this option enabled, the insulin sensitivity will be decreased while
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). Bu sapmalara göre sizin ne kadar duyarlı/dirençli olduğunuzu anlamaya çalışacak ve bu sapmalara göre bazal hızı ve IDF'yi ayarlayacaktır.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- İnsüline dirençli yetişkin: 12
- Hamile: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### OpenAPS'in gönderebileceği maksimum bazal AİNS \[U\] (OpenAPS "maks-AİNS")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- İnsüline dirençli yetişkin: 12
- Hamile: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### AMA Otoduyarlılığı Etkinleştirme
From caf165270ca22dc0411465c6d55c10f8e8a029cf Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:23:31 +0200
Subject: [PATCH 147/303] New translations devbranch.md (Turkish)
---
docs/CROWDIN/tr/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/tr/AdvancedOptions/DevBranch.md b/docs/CROWDIN/tr/AdvancedOptions/DevBranch.md
index 2c283445277f..735296a92f7f 100644
--- a/docs/CROWDIN/tr/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/tr/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From 831366f80a544053f2da71fd42684fd37b5cc32a Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:26:24 +0200
Subject: [PATCH 148/303] New translations diaconng8.md (Turkish)
---
docs/CROWDIN/tr/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/tr/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/tr/CompatiblePumps/DiaconnG8.md
index 0225db0b1db4..5d6cc58589d3 100644
--- a/docs/CROWDIN/tr/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/tr/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Yayma Blosu fonksiyonu
- Yayma bolus kullanırsanız, kapalı döngü devre dışı bırakılır.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From dd398c4dbc4775188f8182110301b4fd2792893b Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:26:29 +0200
Subject: [PATCH 149/303] New translations releasenotes.md (Turkish)
---
docs/CROWDIN/tr/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/tr/Maintenance/ReleaseNotes.md b/docs/CROWDIN/tr/Maintenance/ReleaseNotes.md
index 852259b7967f..a1c84b050c79 100644
--- a/docs/CROWDIN/tr/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/tr/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Yayınlanma tarihi: 23-01-2021
- NSClient düzeltmeleri
- Bolus danışmanı artık Pumpcontrol ve NSClient ile çalışıyor
+(version-2811)=
+
## Sürüm 2.8.1.1
Yayınlanma tarihi: 12-01-2021
From 4a8dbbc26da81b1a1eed7ba39ef794f7341b102c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:26:33 +0200
Subject: [PATCH 150/303] New translations automations.md (Turkish)
---
docs/CROWDIN/tr/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/tr/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/tr/DailyLifeWithAaps/Automations.md
index bd1c2dd689da..08e8e6b6da6a 100644
--- a/docs/CROWDIN/tr/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/tr/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From df026c5c7b38bca1b671e988191a27ba3ed6353a Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:26:35 +0200
Subject: [PATCH 151/303] New translations extendedcarbs.md (Turkish)
---
docs/CROWDIN/tr/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/tr/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/tr/DailyLifeWithAaps/ExtendedCarbs.md
index fe801a1a2649..0e05344d0f49 100644
--- a/docs/CROWDIN/tr/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/tr/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ Bir Pizza için, *hesap makinesi* aracılığıyla önden (kısmi) bir bolus ver
**Önemli notlar:** Elbette sizin için hangi somut değerlerin işe yaradığını denemeniz ve görmeniz gerekecek. Algoritmayı daha fazla veya daha az agresif hale getirmek için *SMB'yi sınırlamak için maksimum bazal dakika* ayarını dikkatli bir şekilde ayarlayabilirsiniz. Düşük karbonhidratlı, yüksek yağlı/proteinli öğünlerde, manuel bolus olmadan yalnızca yKarb kullanmak yeterli olabilir (yukarıdaki blog gönderisine bakın). yKarb oluşturulduğunda, girdileri yinelemeyi ve iyileştirmeyi kolaylaştırmak için tüm girdileri belgelemek için bir Careportal notu da oluşturulur.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Yayma bolus ve neden kapalı döngü ortamında çalışmaz?
Yukarıda belirtildiği gibi, yayma veya çoklu yayma boluslar, kapalı döngü ortamında gerçekten çalışmaz. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ Bu nedenle 2.6 sürümünden itibaren Dana ve Insight pompa kullanıcıları iç

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Yayma boluslar neden kapalı döngü ortamında çalışmaz?
1. Şimdi döngü 1,55Ü/s teslim edileceğini belirler. Bunun yayma bir bolus olarak mı yoksa GBO olarak mı iletildiği, algoritma için önemli değildir. Aslında, bazı pompalar yayma bolusu kullanır. O zaman ne olmalı? Çoğu pompa sürücüsü daha sonra yayma bolusu durdurur -> Başlatmanıza bile gerek yoktur.
From e87f396717a576817b7398839533312d267c4d31 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:27:13 +0200
Subject: [PATCH 152/303] New translations omnipoderos.md (Turkish)
---
.../CROWDIN/tr/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/tr/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/tr/CompatiblePumps/OmnipodEros.md
index 2c1884ca2144..66ce46731ebf 100644
--- a/docs/CROWDIN/tr/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/tr/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ Aynı ekranda, pompa seçiminin altında **Omnipod Sürücü Ayarları** görün
**Kurulum Sihirbazı**'nın geri kalanına devam etmek için **İleri** düğmesine basın. Seçilen RileyLink'in başlatılması bir dakika kadar sürebilir ve **İleri** > butonuna basarak aktif hale getirin.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**VEYA**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Sol üst köşedeki **hamburger menüsü** aracılığıyla **Konfigürasyon ayarları(1)** ➜**Pompa**➜**Omnipod** altındaki **Omnipod** başlığındaki **radyo düğmesi (2)**. **Ayar Dişlisi (3)**'ün yanındaki **onay kutusu (4)** seçildiğinde, Omnipod menüsü AAPS arayüzünde **POD** başlıklı bir sekme olarak görüntülenir. Bu dokümanda **Omnipod (POD)** sekmesi olarak anılır.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Lütfen **sola kaydırıp** tüm pod ve RileyLink işlevlerini yönetebileceğin
### RileyLink Kurulumu
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Not: RileyLink'in bağlı olmadığının göstergesi, GİRİŞ sekmesindeki İnsülin ve Hesap Makinesi düğmelerinin eksik olmasıdır. Bu, RileyLink'e aktif olarak bağlanıp, AAPS başladıktan sonraki ilk 30 saniye boyunca da böyle olacaktır.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. Omnipod sürücüsünü seçtikten sonra **Konfigürasyon ayarları (1)** ➜**Pompa**➜**Omnipod**➜**Dişli Çark (Ayarlar) (2) **➜**RileyLink Yapılandırması (3)** **Ayarlanmadı** veya **MAC Adresi (varsa)** metnine basarak RileyLink'inizi belirleyin ve seçin.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Seçildikten sonra, ilk pod oturumunuzu etkinleştirmek için ilerleyebilirsiniz. Ana AAPS arayüzüne dönmek için telefonunuzdaki geri düğmesini kullanın.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Seçildikten sonra, ilk pod oturumunuzu etkinleştirmek için ilerleyebilirsiniz. Ana AAPS arayüzüne dönmek için telefonunuzdaki geri düğmesini kullanın.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Bir podu etkinleştirmeden önce lütfen Omnipod ayarlarında RileyLink bağlantınızı doğru şekilde yapılandırdığınızdan ve bağlandığınızdan emin olun
-*HATIRLATICI: Güvenlik güvenlik önlemleri nedeniyle, pod aktivasyon eşleştirmesi için pod iletişimi sınırlı mesafede gerçekleşir. Eşleştirmeden önce Pod'un radyo sinyali daha zayıftır, ancak eşleştirildikten sonra tam sinyal gücünde çalışacaktır. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*HATIRLATICI: Güvenlik güvenlik önlemleri nedeniyle, pod aktivasyon eşleştirmesi için pod iletişimi sınırlı mesafede gerçekleşir. Eşleştirmeden önce Pod'un radyo sinyali daha zayıftır, ancak eşleştirildikten sonra tam sinyal gücünde çalışacaktır. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. **Omnipod (POD)** sekmesine gidin ve **POD YNTM (1)** butonuna ve ardından **Podu Etkinleştir(2)**'i tıklayın.
@@ -143,7 +143,7 @@ Bir podu etkinleştirmeden önce lütfen Omnipod ayarlarında RileyLink bağlant
>
> Yeni pod ve RileyLink'in birbirine yakın (~30cm veya daha az) olduğundan emin olun ve **İleri** butonunu tıklayın.
-03. **Pod'u Başlat** ekranında, pod hazırlanmaya başlar (pod kendini hazırlarken bir tıklama ve ardından bir dizi tıkırtı sesi duyarsınız). RileyLink etkinleştirilmekte olan podun kapsama alanı dışındaysa **Pod yanıt vermiyor** hata mesajı alırsınız. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. **Pod'u Başlat** ekranında, pod hazırlanmaya başlar (pod kendini hazırlarken bir tıklama ve ardından bir dizi tıkırtı sesi duyarsınız). RileyLink etkinleştirilmekte olan podun kapsama alanı dışındaysa **Pod yanıt vermiyor** hata mesajı alırsınız. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Bir podu etkinleştirmeden önce lütfen Omnipod ayarlarında RileyLink bağlant
**Omnipod(POD)** sekme ekranına dönmek için telefonunuzdaki geri düğmesini tıklayın. Şimdi aktif pod oturumunuz için mevcut bazal oran, pod rezervuar seviyesi, iletilen insülin, pod hataları ve uyarılar dahil Pod bilgileri görüntülenecektir.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
Aşağıdaki süreç, insülin pompası iletimini nasıl askıya alacağınızı ve devam ettireceğinizi gösterecektir.
-*NOT - bir ASKIYA AL butonu* görmüyorsanız, Omnipod (POD) sekmesinde görüntülenmesi etkinleştirilmemiştir. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOT - bir ASKIYA AL butonu* görmüyorsanız, Omnipod (POD) sekmesinde görüntülenmesi etkinleştirilmemiştir. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### İnsülin İletiminin Askıya Alınması
@@ -433,7 +433,7 @@ Aşağıda, ana AAPS arayüzündeki **Omnipod (POD)** sekmesindeki simgelerin ve
- **Toplam iletilen:** Rezervuardan iletilen toplam insülin ünite miktarını görüntüler. *Pod mutlak kesinlikle hazırlanıp ve doldurulmadığı için bunun bir tahmin olduğunu unutmayın.*
-- **Hatalar:** Karşılaşılan son hatayı görüntüler. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Hatalar:** Karşılaşılan son hatayı görüntüler. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Etkin pod alarmları:** Etkin pod alarmlarını gösteren satırdır. Genellikle pod son kullanma tarihi 72 saat sonraysa ve pod yerel bip sesleri çıkardığında kullanılır.
@@ -447,7 +447,7 @@ Aşağıda, ana AAPS arayüzündeki **Omnipod (POD)** sekmesindeki simgelerin ve
>
> Pod durumunu yenilemek ve metin içeren (belirsiz) durum satırlarını yenilemek için kullanın.
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD YNTM:**
From cd89f7ec4e5b509f49a13348ef0f61946610f79f Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:27:28 +0200
Subject: [PATCH 153/303] New translations introduction.md (Turkish)
---
docs/CROWDIN/tr/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/tr/Getting-Started/Introduction.md b/docs/CROWDIN/tr/Getting-Started/Introduction.md
index 9b77baa75dd7..090ae86c34db 100644
--- a/docs/CROWDIN/tr/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/tr/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ The above table assumes that the user has access to both continuous gluocse moni
*All data from **AAPS** can be made available to healthcare professionals via data sharing platforms, including Nightscout that provides logging and real time monitoring of CGM data, insulin delivery, carbohydrate entries, predictions and settings. Nightscout records include daily and weekly reports which can aid healthcare professionals' discussions with type 1 patients with more accurate data on glycemic control and any behavioural considerations.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibility for users AAPS who are partially or completely blind
#### Day to day AAPS use:
From 4c087b997afcb273f2863e2ed0752322df55ca53 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:27:30 +0200
Subject: [PATCH 154/303] New translations preparingforaaps.md (Turkish)
---
docs/CROWDIN/tr/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/tr/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/tr/Getting-Started/PreparingForAaps.md
index 3c01b2b568c7..269d4f04164f 100644
--- a/docs/CROWDIN/tr/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/tr/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ To aid the build process there are dedicated sections:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore & configuration settings export file
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Medical considerations
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulin choice
From ed5f83420500a557975186937199d0424988eb8d Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:29:59 +0200
Subject: [PATCH 155/303] New translations compatiblepumps.md (Turkish)
---
docs/CROWDIN/tr/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/tr/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/tr/Getting-Started/CompatiblePumps.md
index d2cf7c3ca681..963460577468 100644
--- a/docs/CROWDIN/tr/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/tr/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From c0c037c6af63a23358fac1e0b92b115737e89414 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:30:00 +0200
Subject: [PATCH 156/303] New translations compatiblescgms.md (Turkish)
---
docs/CROWDIN/tr/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/tr/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/tr/Getting-Started/CompatiblesCgms.md
index 5253fce5cd34..2764c11c2b9c 100644
--- a/docs/CROWDIN/tr/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/tr/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| CGM | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From 7cc22191c49202593c18e2a335ab66f043e8309c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:31:06 +0200
Subject: [PATCH 157/303] New translations aapsscreens.md (Chinese Simplified)
---
.../zh_CN/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/zh_CN/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/zh_CN/DailyLifeWithAaps/AapsScreens.md
index 3d23a90e894a..a8c3e54f8299 100644
--- a/docs/CROWDIN/zh_CN/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/zh_CN/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@
* 你也可以通过左右滑动来切换屏幕。
* 在[config builder](#Config-Builder-tab-or-hamburger-menu)中可以选择显示的标签。
+(aaps-screens-profile--target)=
+
### B部分 - 配置文件&目标
#### 当前配置文件
@@ -295,7 +297,7 @@ BG值的颜色反映其状态与预定义[范围](#Preferences-range-for-visuali
您可以在主图表下方激活最多四个附加图表。 在[简单模式](#preferences-simple-mode)下,附加图表是预设的,无法更改。 如果希望设置自己的附加图表配置,请关闭**简单模式**。
-要打开附加图表的设置,请点击[主图表](#section-f---main-graph)右侧的三角形并向下滚动。
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ BG值的颜色反映其状态与预定义[范围](#Preferences-range-for-visuali

-在不使用[大剂量计算器](#bolus-wizard)的情况下给予一定量的胰岛素。
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
通过选中**即将进食临时目标**框,你可以自动启动你的[即将进食临时目标](#TempTargets-eating-soon-temp-target)。
@@ -406,7 +408,7 @@ BG值的颜色反映其状态与预定义[范围](#Preferences-range-for-visuali
#### 计算器
-参见大剂量向导[下方部分](#bolus-wizard)。
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### 校准
@@ -503,18 +505,20 @@ BG字段通常已经填充了来自您的动态(CGM)的最新读数。 如
### 操作Action - M部分
-按钮**[配置文件切换](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)**作为按主页屏幕上的[当前配置文件](#section-b---profile--target)的替代选项。
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-按钮**[临时目标](../DailyLifeWithAaps/TempTargets.md)**作为按主页屏幕上的[当前目标](#section-b---profile--target)的替代选项。
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
启动或取消临时基础率的按钮。 请注意,当设置了临时基础率时,按钮会从“TEMPBASAL”更改为“取消x%”。
-尽管[扩展大剂量](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)在闭环环境中并不真正适用,但有些人仍要求提供使用扩展大剂量的选项。
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* 此选项仅适用于Dana RS和Insight泵。
* 闭环将自动停止并切换到开环模式,以运行扩展大剂量。
* 在使用此选项之前,请务必阅读[详细信息](../DailyLifeWithAaps/ExtendedCarbs.md)。
+(aaps-screens-careportal)=
+
### Careportal - N部分
显示信息:
@@ -536,7 +540,7 @@ BG字段通常已经填充了来自您的动态(CGM)的最新读数。 如
### 护理门户(Careportal) - O部分
-血糖检测、输注装置准备/填充、传感器插入和泵电池更换是[N部分](#careportal---section-n)中显示数据的基础。
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
输注装置准备/填充功能允许您记录泵底板和胰岛素储药器的更换情况。
@@ -647,7 +651,7 @@ BG字段通常已经填充了来自您的动态(CGM)的最新读数。 如
* 餐食(通过胰岛素、快速向导或大剂量向导按钮手动输入)
* 使用SMB功能时的SMB
-碳水化合物(行**2**)仅存储在Nightscout中。 如果您使用了[大剂量胰岛素向导](#bolus-wizard)来计算胰岛素剂量,您可以按“Calc”文本(行**3**)来显示大剂量胰岛素计算过程的详细信息。
+碳水化合物(行**2**)仅存储在Nightscout中。 If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
根据所使用的泵,胰岛素和碳水化合物可能显示在一行中,或者会产生多行:一行用于计算细节,一行用于碳水化合物,一行用于大剂量胰岛素本身。
@@ -702,7 +706,7 @@ BG字段通常已经填充了来自您的动态(CGM)的最新读数。 如
## 历史浏览器
-可以通过点击菜单右侧的3个点,然后选择“历史记录”来访问此视图。 通过Config Builder无法将项目添加到主菜单中。 也可以通过[操作选项卡](#action-tab)底部的按钮来访问它。
+可以通过点击菜单右侧的3个点,然后选择“历史记录”来访问此视图。 通过Config Builder无法将项目添加到主菜单中。 It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
允许您在**AAPS**历史记录中回溯。 请参阅专门页面[查看您的数据>历史记录浏览器](../Maintenance/Reviewing.md)。
From 416f53bd86e34362fe1410ee7df857ef77159fd0 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:31:09 +0200
Subject: [PATCH 158/303] New translations keyaapsfeatures.md (Chinese
Simplified)
---
.../CROWDIN/zh_CN/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/zh_CN/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/zh_CN/DailyLifeWithAaps/KeyAapsFeatures.md
index 7e3fd25c4d32..cd822660b22f 100644
--- a/docs/CROWDIN/zh_CN/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/zh_CN/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ OpenAPS SMB的设置如下所述。
- 胰岛素抵抗成人:12
- 孕妇:25
-*另请参见[硬编码限制概述](#overview-of-hard-coded-limits)。*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ OpenAPS SMB的设置如下所述。
- 胰岛素抵抗成人:25
- 孕妇:40
-*另请参见[硬编码限制概述](#overview-of-hard-coded-limits)。*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
注意:在使用**SMB**时,**max-IOB**的计算方式与AMA不同。 在**AMA**中,maxIOB是基础**IOB**的安全参数,而在SMB模式下,它还包括大剂量IOB。
@@ -117,7 +117,7 @@ OpenAPS SMB的设置如下所述。
### 启用Autosens功能
-此为[Autosens](#autosens)功能。 启用DynamicISF时无法同时启用,因二者为修改同一参数(胰岛素敏感系数)的不同算法。
+This is the [Autosens](#Open-APS-features-autosens) feature. 启用DynamicISF时无法同时启用,因二者为修改同一参数(胰岛素敏感系数)的不同算法。
Autosens观察血糖偏差(正/负/中性)。 它将尝试根据这些偏差来确定你对胰岛素的敏感或抵抗程度,并根据这些偏差调整基础率和ISF。
@@ -268,7 +268,7 @@ AMA,即“advanced meal assist”的缩写,是OpenAPS从2017年(oref0)
- 胰岛素抵抗成人:12
- 孕妇:25
-*另请参见[硬编码限制概述](#overview-of-hard-coded-limits)。*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### OpenAPS可以提供的最大基础IOB [U](OpenAPS“max-iob”)
@@ -282,7 +282,7 @@ AMA,即“advanced meal assist”的缩写,是OpenAPS从2017年(oref0)
- 胰岛素抵抗成人:12
- 孕妇:25
-*另请参见[硬编码限制概述](#overview-of-hard-coded-limits)。*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### 启用AMA Autosens
From 86824b1e4a670ab7670de05729b6cd646f66c6c8 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:31:47 +0200
Subject: [PATCH 159/303] New translations devbranch.md (Chinese Simplified)
---
docs/CROWDIN/zh_CN/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/zh_CN/AdvancedOptions/DevBranch.md b/docs/CROWDIN/zh_CN/AdvancedOptions/DevBranch.md
index e12404542353..48726cd05a9e 100644
--- a/docs/CROWDIN/zh_CN/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/zh_CN/AdvancedOptions/DevBranch.md
@@ -54,14 +54,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From 957b77b84c475153aef612ad53945bc61c76a119 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:34:39 +0200
Subject: [PATCH 160/303] New translations diaconng8.md (Chinese Simplified)
---
docs/CROWDIN/zh_CN/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/zh_CN/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/zh_CN/CompatiblePumps/DiaconnG8.md
index 6090b7547c4e..f07c17727c69 100644
--- a/docs/CROWDIN/zh_CN/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/zh_CN/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### 扩展大剂量功能
- 使用扩展大剂量功能将关闭闭环系统。
-- 具体原因请参阅[此页面](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)了解为何扩展大剂量功能在闭环环境中不可用。
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From 13668a47b8cf97910ebb1c6e788a19b6318774c8 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:34:44 +0200
Subject: [PATCH 161/303] New translations releasenotes.md (Chinese Simplified)
---
docs/CROWDIN/zh_CN/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/zh_CN/Maintenance/ReleaseNotes.md b/docs/CROWDIN/zh_CN/Maintenance/ReleaseNotes.md
index e0229ecd9a51..f452c2b18732 100644
--- a/docs/CROWDIN/zh_CN/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/zh_CN/Maintenance/ReleaseNotes.md
@@ -492,6 +492,8 @@ v3为新协议, 更加安全高效
- NSClient修复
- 推注顾问支持Pumpcontrol与NSClient
+(version-2811)=
+
## 版本 2.8.1.1
发布日期:2021年1月12日
From f65eb6f0d97213b983661c9874cc72987be4f407 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:34:47 +0200
Subject: [PATCH 162/303] New translations automations.md (Chinese Simplified)
---
docs/CROWDIN/zh_CN/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/zh_CN/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/zh_CN/DailyLifeWithAaps/Automations.md
index 560b3aea3c19..753bbae729d1 100644
--- a/docs/CROWDIN/zh_CN/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/zh_CN/DailyLifeWithAaps/Automations.md
@@ -269,6 +269,8 @@

+(automating-preference-settings-export)=
+
## 自动化参数设置导出
### 无人值守导出模式:定时导出(每日执行)
From ea83353b6732e0d808ee155b0e46c46e6e5f7e0c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:34:50 +0200
Subject: [PATCH 163/303] New translations extendedcarbs.md (Chinese
Simplified)
---
docs/CROWDIN/zh_CN/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/zh_CN/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/zh_CN/DailyLifeWithAaps/ExtendedCarbs.md
index d961f9b1e994..1e45f48e37db 100644
--- a/docs/CROWDIN/zh_CN/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/zh_CN/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ ______________________________________________________________________
**重要注意事项**:当然,您需要尝试并确定哪些具体值对您有效。 您可能还需要仔细调整*“限制SMB的基础分钟数”*设置,以使算法更激进或更保守。 对于低碳水化合物、高脂肪/蛋白质的餐食,可能只使用eCarbs而无需手动输注就足够了(请参阅上面的博客文章)。 当生成eCarbs时,还会创建一个Careportal备注来记录所有输入,以便更容易地迭代和改进输入。
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## 扩展大剂量及其在闭环环境中为何不起作用?
如上所述,扩展大剂量或多波大剂量在闭环环境中实际上并不起作用。 详见[下文](#why-extended-boluses-wont-work-in-a-closed-loop-environment)。
@@ -53,7 +53,7 @@ ______________________________________________________________________

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### 扩展大剂量在闭环环境中不起作用的原因
1. 闭环系统确定现在需要输注1.55U/h。 无论这是以扩展大剂量还是TBR(临时基础率)的形式输注,对算法来说都没有区别。 事实上,一些泵使用的是扩展大剂量。 那么接下来应该发生什么? 大多数泵驱动程序会停止扩展大剂量—>你甚至都不需要开始它。
From 4890145686868a822a5bb417ed90898d75b7bf93 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:35:29 +0200
Subject: [PATCH 164/303] New translations omnipoderos.md (Chinese Simplified)
---
.../zh_CN/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/zh_CN/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/zh_CN/CompatiblePumps/OmnipodEros.md
index 19ee0c9a87c3..40cc9d7e617b 100644
--- a/docs/CROWDIN/zh_CN/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/zh_CN/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ orphan: true
点击**下一步**按钮继续完成**设置向导**其余步骤。所选RileyLink初始化可能需要长达一分钟,之后**下一步**按钮才会激活。
-具体设置储药器通信设备的步骤详见下文[RileyLink配置章节](#rileylink-setup)。
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**或**
@@ -77,7 +77,7 @@ orphan: true
通过左上角**汉堡菜单**进入**配置构建器(1)**➜**泵**➜**Omnipod**,选择标有**Omnipod**的**单选按钮(2)**。 勾选**设置齿轮图标(3)**旁的**复选框(4)**后,Omnipod菜单将作为**POD**标签页显示在AAPS界面中。 本文档中将其称为**Omnipod(POD)**标签页。
-> **注意:**更快捷访问**Omnipod设置**的方法请参阅本文档[Omnipod设置章节](#omnipod-settings)。
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ orphan: true
### RileyLink 设置
-若您已通过设置向导或上述步骤成功配对RileyLink,请直接前往下方[激活储药器章节](#activating-a-pod)。
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*注:RileyLink未连接时,主页标签页的胰岛素和计算器按钮会消失,这是明显的视觉提示。 AAPS启动后约30秒内也会出现此现象,此时系统正在主动连接RileyLink。*
@@ -109,7 +109,7 @@ orphan: true
2. 选择Omnipod驱动后,通过**配置构建器(1)**➜**泵**➜**Omnipod**➜**齿轮图标(设置)(2)**➜**RileyLink配置(3)**路径,点击**未设置**或**MAC地址(如有显示)**文字来识别并选择您的RileyLink设备。
- > 请确保您的RileyLink电量充足,并将其[紧贴放置](#optimal-omnipod-and-rileylink-positioning)(距离手机约30厘米以内),以便AAPS通过MAC地址识别设备。 选择完成后,即可开始激活首个储药器使用会话。 使用手机返回键回到AAPS主界面。
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. 选择完成后,即可开始激活首个储药器使用会话。 使用手机返回键回到AAPS主界面。
>
>  
@@ -131,7 +131,7 @@ orphan: true
激活储药器前,请确保您已在Omnipod设置中正确配置并连接RileyLink设备。
-*重要提示:出于安全防护机制,储药器激活配对时的通信距离存在严格限制。 配对前储药器射频信号较弱,但成功配对后将恢复全功率信号传输。 操作过程中,请确保*储药器[紧贴放置](#optimal-omnipod-and-rileylink-positioning)(距离约30厘米以内),但避免直接叠放或紧靠RileyLink设备。
+*重要提示:出于安全防护机制,储药器激活配对时的通信距离存在严格限制。 配对前储药器射频信号较弱,但成功配对后将恢复全功率信号传输。 During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. 请进入**Omnipod(POD)**标签页,点击**储药器管理(1)**按钮,然后选择**激活储药器(2)**。
@@ -143,7 +143,7 @@ orphan: true
>
> 请确保新储药器与RileyLink设备保持近距离(30厘米以内),然后点击**下一步**按钮。
-03. 在**初始化储药器**界面,储药器将开始自检(您会听到"咔嗒"一声,随后是一连串滴答声,表明储药器正在进行自检程序)。 若RileyLink超出待激活储药器的有效范围,您将收到**储药器无响应**的错误提示。 遇到此情况时,请[将RileyLink移近](#optimal-omnipod-and-rileylink-positioning)储药器(保持30厘米以内距离,但勿直接叠放或紧贴),然后点击**重试(1)**按钮。
+03. 在**初始化储药器**界面,储药器将开始自检(您会听到"咔嗒"一声,随后是一连串滴答声,表明储药器正在进行自检程序)。 若RileyLink超出待激活储药器的有效范围,您将收到**储药器无响应**的错误提示。 If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ orphan: true
点击手机返回键回到**Omnipod(POD)**标签页,此时界面将显示当前储药器会话信息,包括基础率、储药器余量、已输注胰岛素量、设备报错及提醒等数据。
- 欲了解界面显示信息的详细说明,请参阅本文档[Omnipod(POD)标签页](#omnipod-pod-tab)章节。
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ orphan: true
以下流程将向您展示如何暂停和恢复胰岛素泵的输注。
-*注意 - 如果您没有看到"暂停"按钮*,说明该功能尚未在Omnipod(POD)标签页中启用显示。 在[Omnipod设置](#omnipod-settings)的**其他**选项下,启用**在Omnipod标签页显示暂停输注按钮**设置。
+*注意 - 如果您没有看到"暂停"按钮*,说明该功能尚未在Omnipod(POD)标签页中启用显示。 Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### 暂停胰岛素输注
@@ -433,7 +433,7 @@ orphan: true
- **总输注量:**显示储药器已输送的胰岛素总量(单位)。 *请注意这是近似值,因为pod的灌注和填充并非精确过程。*
-- **错误信息:**显示最近发生的错误。 检查[Pod历史记录](#view-pod-history)、[RileyLink历史记录](#omnipod-eros-rileylink-and-active-pod-history)以及日志文件,以查看过往错误和更详细信息。
+- **错误信息:**显示最近发生的错误。 Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **活动储药器警报:** 保留用于当前活动储药器上正在运行的警报。 通常用于当pod超过72小时有效期且设备原生蜂鸣警报正在运行时。
@@ -447,7 +447,7 @@ orphan: true
>
> 用于刷新储药器状态并清除显示(不确定)的状态字段。
>
- > 请参阅下方[故障排除章节](#troubleshooting)获取更多信息。
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD管理:**
From 3d1c8d44935754fd2719151b397c394f1d39d5bf Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:35:44 +0200
Subject: [PATCH 165/303] New translations introduction.md (Chinese Simplified)
---
docs/CROWDIN/zh_CN/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/zh_CN/Getting-Started/Introduction.md b/docs/CROWDIN/zh_CN/Getting-Started/Introduction.md
index 3b27d0a64ec3..d61daea5ae30 100644
--- a/docs/CROWDIN/zh_CN/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/zh_CN/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ David Burren [https://bionicwookie.com/](https://bionicwookie.com/)
* **AAPS**的所有数据均可通过数据共享平台(如Nightscout)提供给医护人员,包括动态血糖仪(CGM)数据实时监测、胰岛素输注(insulin delivery)追踪、碳水化合物登记(carbohydrate entries)记录、预测算法及参数设置(predictions and settings)可视化等。 Nightscout生成的日报和周报包含血糖控制状态量化分析与个体化行为观察因素的精准数据,可助力医疗团队优化与1型糖尿病患者的临床讨论。
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### 为部分或完全失明的 AAPS 用户提供无障碍环境
#### AAPS 的日常使用:
From b1a713904a5c8172d66c7461e1dd438e07404fc6 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:35:45 +0200
Subject: [PATCH 166/303] New translations preparingforaaps.md (Chinese
Simplified)
---
docs/CROWDIN/zh_CN/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/zh_CN/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/zh_CN/Getting-Started/PreparingForAaps.md
index 7a5b89124386..c897029dd680 100644
--- a/docs/CROWDIN/zh_CN/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/zh_CN/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ SGLT-2抑制剂的常见商品名包括:Invokana、Farxiga、Jardiance、Glyxa
- “[如何安装AAPS](../SettingUpAaps/BuildingAaps.md)?” (第D节)其中包括[故障排除](../GettingHelp/GeneralTroubleshooting.md)小节。
-要达到闭环控制所需的时间因人而异,但你可以([在这里](#how-long-will-it-take-to-set-everything-up))找到使用AAPS实现完全闭环控制的大致时间表。
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### 密钥库&和配置设置导出文件
@@ -188,7 +188,7 @@ SGLT-2抑制剂的常见商品名包括:Invokana、Farxiga、Jardiance、Glyxa
### 医疗考虑
-除了[安全部分](#safety-first)中的医疗警告外,根据您在泵中使用的胰岛素类型,还会有不同的参数设置。
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### 胰岛素选择
From 5695254164b653279674c5810cf037531e18edca Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:38:14 +0200
Subject: [PATCH 167/303] New translations compatiblepumps.md (Chinese
Simplified)
---
docs/CROWDIN/zh_CN/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/zh_CN/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/zh_CN/Getting-Started/CompatiblePumps.md
index c2b4ea37ebb0..974eb9c181c6 100644
--- a/docs/CROWDIN/zh_CN/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/zh_CN/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS可与多种胰岛素泵配合使用。 以下列表显示了当前支持
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (蓝牙)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (蓝牙)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (蓝牙)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) (需要[额外的通信设备](#additional-communication-device))
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (蓝牙)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (蓝牙)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (蓝牙)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (蓝牙)
-- 某些较旧的[美敦力](../CompatiblePumps/MedtronicPump.md)设备(需要[额外的通信设备](#additional-communication-device))
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## 我的胰岛素泵未列出。
From 45fb1713c9b12702eb0e72efa6b6a1fd45e7a45c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:38:15 +0200
Subject: [PATCH 168/303] New translations compatiblescgms.md (Chinese
Simplified)
---
docs/CROWDIN/zh_CN/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/zh_CN/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/zh_CN/Getting-Started/CompatiblesCgms.md
index b5579960346b..d3637ddd03eb 100644
--- a/docs/CROWDIN/zh_CN/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/zh_CN/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@
* [xDrip+设置](../CompatibleCgms/xDrip.md)
* [将Nightscout作为血糖来源](../CompatibleCgms/CgmNightscoutUpload.md):虽然可以将Nightscout用作闭环胰岛素输注的血糖来源,但**并不推荐这种方法**,因为它依赖于稳定的移动数据或Wi-Fi连接。 这意味着,只有当您与Nightscout站点在线连接时,您的**CGM(持续葡萄糖监测系统)**数据才会被**AAPS**接收。 为了获得更可靠的设置,使用能够从接收器本地广播到**AAPS**的CGM(如下所列)是一个更好的选择。
-| CGM | 可用的[血糖数据源](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [德康 G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From d2c6d74d050f52e461082982152914686d9a0030 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:39:19 +0200
Subject: [PATCH 169/303] New translations aapsscreens.md (Chinese Traditional)
---
.../zh_TW/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/zh_TW/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/zh_TW/DailyLifeWithAaps/AapsScreens.md
index 714c894c25cc..d46062672077 100644
--- a/docs/CROWDIN/zh_TW/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/zh_TW/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@
* 你還可以透過向左或向右滑動來更換螢幕。
* 顯示的選項卡可以在 [組態建置工具](#Config-Builder-tab-or-hamburger-menu) 中選擇。
+(aaps-screens-profile--target)=
+
### B 區 - 設定檔 & 目標
#### 目前的設定檔
@@ -295,7 +297,7 @@ Libre 使用者的特殊注意事項:
你可以在主圖表下啟用最多四個其他圖表。 當在 [簡單模式](#preferences-simple-mode) 時,額外圖表是預設的,無法更改。 如果要設定自己的額外圖表組態,請關閉 **簡單模式**。
-要開啟額外圖表的設定,點擊[主圖表](#section-f---main-graph)右側的三角形並向下滾動。
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ Libre 使用者的特殊注意事項:

-要在不使用[注射計算器](#bolus-wizard)的情況下給予特定的胰島素量。
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
透過勾選 **即將用餐(臨時目標)**方框,你可以自動啟動你的 [即將進餐的臨時目標](#TempTargets-eating-soon-temp-target)。
@@ -406,7 +408,7 @@ Libre 使用者的特殊注意事項:
#### 計算機
-請參閱注射嚮導 [下方章節](#bolus-wizard)。
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### 校準
@@ -503,18 +505,20 @@ Libre 使用者的特殊注意事項:
### 操作 - M 區
-按鈕**[設定檔切換](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)**作為按壓[主畫面當前設定檔](#section-b---profile--target)的替代選項。
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-按鈕**[臨時目標](../DailyLifeWithAaps/TempTargets.md)**作為按壓[主畫面當前目標](#section-b---profile--target)的替代選項。
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
啟動或取消臨時基礎率的按鈕。 請注意,當設置了臨時基礎率時,按鈕將從「臨時基礎速度」變為「取消 x.xx U/H」。
-儘管[延長注射](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)在封閉循環環境中實際上無法運作,但有些人還是要求提供使用延長注射的選項。
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* 此選項僅適用於 Dana RS 和 Insight 幫浦。
* 閉環將自動停止並切換為開環模式,以運作延長注射。
* 在使用此選項之前,務必閱讀[詳細資訊](../DailyLifeWithAaps/ExtendedCarbs.md)。
+(aaps-screens-careportal)=
+
### 護理入口 - N 區
顯示以下資訊:
@@ -536,7 +540,7 @@ Libre 使用者的特殊注意事項:
### 護理入口 - O 區
-血糖檢查、預備/填充、傳感器插入和幫浦電池更換是[N部分](#careportal---section-n)中顯示資料的基礎。
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
填充/注入允許你紀錄幫浦部位和胰島素筒的更換。
@@ -647,7 +651,7 @@ O 區反應了 Nightscout 的護理入口功能。 因此,運動、公告和
* 餐前(通過胰島素、快速嚮導或注射嚮導按鈕手動輸入)
* 當使用 SMB 功能時的 SMB
-碳水化合物(第**2**行)僅存儲在 Nightscout 中。 如果你使用 [注射嚮導](#bolus-wizard) 計算胰島素劑量,你可以按下「計算」文字(第**3**行)以顯示注射計算的詳細訊息。
+碳水化合物(第**2**行)僅存儲在 Nightscout 中。 If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
根據使用的幫浦,胰島素和碳水化合物可以顯示在一行中,或者會導致多行顯示:一行顯示計算詳細訊息,一行顯示碳水化合物,一行顯示注射本身。
@@ -702,7 +706,7 @@ O 區反應了 Nightscout 的護理入口功能。 因此,運動、公告和
## 歷史瀏覽器
-可以通過按下選單右側的 3 個點然後選擇「歷史」來讀取此視圖。 無法通過組態建置工具在主選單中放入它。 還可以通過[手動操作標籤](#action-tab)底部的一個按鈕讀取。
+可以通過按下選單右側的 3 個點然後選擇「歷史」來讀取此視圖。 無法通過組態建置工具在主選單中放入它。 It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
允許你查詢在 **AAPS** 中的歷史紀錄。 請參閱專門頁面 [檢視你的資料 > 歷史瀏覽器](../Maintenance/Reviewing.md)。
From 763076a297c01f7766e0db720dc64428034ce5a5 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:39:23 +0200
Subject: [PATCH 170/303] New translations keyaapsfeatures.md (Chinese
Traditional)
---
.../CROWDIN/zh_TW/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/zh_TW/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/zh_TW/DailyLifeWithAaps/KeyAapsFeatures.md
index 75c15f714f5c..d2c24485ba59 100644
--- a/docs/CROWDIN/zh_TW/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/zh_TW/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ OpenAPS SMB 的設定如下。
- 胰島素抗性成人:12
- 孕婦:25
-*請參閱 [硬性限制總覽](#overview-of-hard-coded-limits)。*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ OpenAPS SMB 的設定如下。
- 胰島素抗性成人:25
- 孕婦:40
-*請參閱 [硬性限制總覽](#overview-of-hard-coded-limits)。*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
注意:在使用 **SMB** 時,**最大 IOB** 的計算方式與 AMA 不同。 在 **AMA** 中,最大 IOB 是基礎 **IOB** 的安全參數,而在 SMB 模式中,還包括注射 IOB。
@@ -117,7 +117,7 @@ OpenAPS SMB 的設定如下。
### 啟用自動敏感度調整功能
-這是[自動敏感度調整](#autosens)功能。 在使用動態 ISF 時,不能使用自動敏感度調整,因為這是兩種不同的算法,會影響相同的變數(敏感度)。
+This is the [Autosens](#Open-APS-features-autosens) feature. 在使用動態 ISF 時,不能使用自動敏感度調整,因為這是兩種不同的算法,會影響相同的變數(敏感度)。
Autosens 會根據血糖偏差(正/負/中性)進行調整。 他會根據這些偏差計算出你對胰島素的敏感度或抗性,並根據偏差調整基礎速率和胰島素敏感指數(ISF)。
@@ -268,7 +268,7 @@ AMA 是 "進階餐食輔助" 的縮寫,是 2017 年 OpenAPS 的一項功能(
- 胰島素抗性成人:12
- 孕婦:25
-*請參閱 [硬性限制總覽](#overview-of-hard-coded-limits)。*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### OpenAPS 可注射的最大基礎 IOB [U](OpenAPS "最大 IOB")
@@ -282,7 +282,7 @@ AMA 是 "進階餐食輔助" 的縮寫,是 2017 年 OpenAPS 的一項功能(
- 胰島素抗性成人:12
- 孕婦:25
-*請參閱 [硬性限制總覽](#overview-of-hard-coded-limits)。*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### 啟用 AMA Autosens
From a1763f290294971c98ae594c7aabcd5f386ff9d6 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:40:00 +0200
Subject: [PATCH 171/303] New translations devbranch.md (Chinese Traditional)
---
docs/CROWDIN/zh_TW/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/zh_TW/AdvancedOptions/DevBranch.md b/docs/CROWDIN/zh_TW/AdvancedOptions/DevBranch.md
index a05cc3e2ae1c..c10212b5d09c 100644
--- a/docs/CROWDIN/zh_TW/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/zh_TW/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ AAPS 的開發版本僅適用於能處理堆棧追蹤、查找日誌文件,甚
- variant:
- - 請參考 [變體](variant)
-
- (variant)=
-
- ### variant
-
- - 選擇您需要的變種:
- - fullRelease: 用於正常的幫浦使用,具有完整功能。
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) 供看護人員使用(需要 [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - 以“Debug”結尾的文字表示 APK 將在除錯模式下建置,這對於除錯很有幫助。
\ No newline at end of file
+ - 請參考 [變體](variant)
\ No newline at end of file
From c839343df8bbff4b159ef9a874f4200fb4460a1e Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:42:53 +0200
Subject: [PATCH 172/303] New translations diaconng8.md (Chinese Traditional)
---
docs/CROWDIN/zh_TW/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/zh_TW/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/zh_TW/CompatiblePumps/DiaconnG8.md
index ea6519ffb5f6..7aeae623b0f5 100644
--- a/docs/CROWDIN/zh_TW/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/zh_TW/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### 延長注射功能
- 如果使用延長注射功能,將會停用循環模式。
-- 請參閱[本頁](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)了解為何延長注射功能無法在循環模式下運作的詳情。
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From 87535e554cb9af33c1baea74644abe0502c19b43 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:42:59 +0200
Subject: [PATCH 173/303] New translations releasenotes.md (Chinese
Traditional)
---
docs/CROWDIN/zh_TW/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/zh_TW/Maintenance/ReleaseNotes.md b/docs/CROWDIN/zh_TW/Maintenance/ReleaseNotes.md
index 94483bc05885..a0cbbfc754df 100644
--- a/docs/CROWDIN/zh_TW/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/zh_TW/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ v3 是新的協議。 更加安全和高效
- NSClient 修復
- 注射建議器現在與 Pumpcontrol 和 NSClient 一起工作
+(version-2811)=
+
## 版本 2.8.1.1
發布日期:2021-01-12
From 71f32b5985a5dd36b78c21ab83c771dcf79b06b3 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:43:02 +0200
Subject: [PATCH 174/303] New translations automations.md (Chinese Traditional)
---
docs/CROWDIN/zh_TW/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/zh_TW/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/zh_TW/DailyLifeWithAaps/Automations.md
index de9b42040ee6..8ced55ae26de 100644
--- a/docs/CROWDIN/zh_TW/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/zh_TW/DailyLifeWithAaps/Automations.md
@@ -273,6 +273,8 @@

+(automating-preference-settings-export)=
+
## 自動化偏好設定匯出
### 不需人員監控的匯出:排程(每日)
From b650abc24dd856cf5313ce34a99dcfd841866f85 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:43:04 +0200
Subject: [PATCH 175/303] New translations extendedcarbs.md (Chinese
Traditional)
---
docs/CROWDIN/zh_TW/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/zh_TW/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/zh_TW/DailyLifeWithAaps/ExtendedCarbs.md
index c8e3450e6b1d..142011305516 100644
--- a/docs/CROWDIN/zh_TW/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/zh_TW/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ ______________________________________________________________________
**重要注意事項:**當然,你需要嘗試看看哪些具體數值對你有效。 你還可以仔細調整*限制 SMB 的最大基礎率分鐘數*設置,以使演算法更積極或較不積極。 對於低碳水化合物、高脂肪/高蛋白餐食,可能僅使用 eCarbs 就足夠,不需要手動注射(詳情請參閱上述的部落格文章)。 當生成 eCarbs 時,系統也會在 Careportal 中生成一個筆記來紀錄所有輸入,這樣可以更容易地進行調整和改進。
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## 延長注射及其為何在閉環系統中無法運作?
如上所述,延長或多波段注射在閉環系統中並不真正有效。 [請參閱下方詳情](#why-extended-boluses-wont-work-in-a-closed-loop-environment)
@@ -53,7 +53,7 @@ ______________________________________________________________________

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### 為什麼延長注射在閉環系統中無法運作
1. 循環系統決定現在應注射 1.55U/h。 無論這是透過延長注射還是 TBR 提供,對於演算法來說沒有區別。 實際上,有些幫浦使用延長注射。 那麼接下來該怎麼辦? 大多數幫浦驅動程式會停止延長注射——> 你甚至不需要開始他。
From 0c64881ace03a58461a2d6319ba7b7e0b2da3115 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:43:43 +0200
Subject: [PATCH 176/303] New translations omnipoderos.md (Chinese Traditional)
---
.../zh_TW/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/zh_TW/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/zh_TW/CompatiblePumps/OmnipodEros.md
index a9b5f55f301e..583728445d65 100644
--- a/docs/CROWDIN/zh_TW/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/zh_TW/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ orphan: true
按下 **下一步** 按鈕繼續完成其餘的 **設定嚮導。** 選擇 RileyLink 後,初始化可能需時達一分鐘,此時 **下一步** 按鈕會變為可點擊狀態。
-有關如何設置你的藥囊通訊設備的詳細步驟列示於[RileyLink 設置部分](#rileylink-setup)。
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**或者**
@@ -77,7 +77,7 @@ orphan: true
透過左上角的 **漢堡選單** 進入 **組態建置工具 (1)** ➜**幫浦** ➜**Omnipod**,選擇標為 **Omnipod** 的 **單選按鈕 (2)**。 勾選 **設定齒輪圖示 (3)** 旁邊的 **勾選框(4)**, Omnipod 選單將會以標籤的形式顯示在 AAPS 界面中,標題為 **POD**。 此處在文件中被稱為 **Omnipod (POD)** 標籤。
-> **注意:** 可以在本文件的[Omnipod 設置部分](#omnipod-settings)中找到更快速讀取**Omnipod 設置**的方法。
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ orphan: true
### RileyLink 設定
-如果你已經在設定嚮導或上述步驟中成功配對了你的 RileyLink,則繼續進入本文件下方的 [啟動幫浦部分](#activating-a-pod)。
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*注意: RileyLink未連線的一個好視覺指示是 HOME 標籤中的胰島素和計算機按鈕將缺失。 這亦會發生在 AAPS 開始運作後的約莫30秒鐘,因為他正在積極連線至 RileyLink。*
@@ -109,7 +109,7 @@ orphan: true
2. 選擇 Omnipod 驅動程式後,從 **組態建置工具 (1)** ➜**幫浦** ➜**Omnipod** ➜**齒輪圖示(設定)(2)** ➜**RileyLink 配置 (3)** 中,按下 **未設定** 或 **MAC 地址(如存在)** 文字來選擇你的 RileyLink。
- > 確保你的 RileyLink 電池充滿電,並且它[放置在靠近](#optimal-omnipod-and-rileylink-positioning) (~30 公分以內) 你的手機附近,以便 AAPS 通過其 MAC 地址識別它。 選擇後,你可以進行你的第一個幫浦會話的啟動。 使用手機上的返回按鈕回到主 AAPS 界面。
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. 選擇後,你可以進行你的第一個幫浦會話的啟動。 使用手機上的返回按鈕回到主 AAPS 界面。
>
>  
@@ -131,7 +131,7 @@ orphan: true
在你可以啟動幫浦之前,請確保你已正確配置並連線你的 RileyLink 在 Omnipod 設定中
-*提醒:幫浦的配對通訊範圍有限,是由於安全保護措施所致。 配對前幫浦無線電信號較弱,但在成功配對後他將以全信號功率運作。 在這些步驟中,請確保你的藥囊[位於靠近](#optimal-omnipod-and-rileylink-positioning) (~30 公分以內) 的範圍內,但不要放在 RileyLink 的上面或緊鄰其旁邊。\*
+*提醒:幫浦的配對通訊範圍有限,是由於安全保護措施所致。 配對前幫浦無線電信號較弱,但在成功配對後他將以全信號功率運作。 During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. 導航到 **Omnipod (POD)** 標籤,點擊 **幫浦管理 (1)** 按鈕,然後點擊 **啟動幫浦 (2)**。
@@ -143,7 +143,7 @@ orphan: true
>
> 確保新幫浦和 RileyLink 在近距範圍內(約30厘米以內),然後點擊 **下一步** 按鈕。
-03. 在 **初始化 Pod** 畫面上,Pod 將開始排空(你會聽到點擊聲,接著是連續的滴答聲,表明 Pod 正在自我排空)。 如果 RileyLink 超出啟動幫浦的範圍,你會收到一條錯誤訊息 **幫浦無回應**。 如果這種情況發生,[將 RileyLink 移得更近](#optimal-omnipod-and-rileylink-positioning) (~30 公分以內),但不要放在 Pod 的上面或緊鄰其旁邊,然後點擊**重試 (1)**按鈕。
+03. 在 **初始化 Pod** 畫面上,Pod 將開始排空(你會聽到點擊聲,接著是連續的滴答聲,表明 Pod 正在自我排空)。 如果 RileyLink 超出啟動幫浦的範圍,你會收到一條錯誤訊息 **幫浦無回應**。 If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ orphan: true
點擊手機上的返回按鈕返回 **Omnipod (POD)** 標籤畫面,現在會顯示你活動的幫浦會話資訊,包括目前基礎速率、幫浦儲庫數值、胰島素投放量、幫浦錯誤和警報。
- 有關顯示訊息的更多詳細訊息,請參見本文件的[Omnipod (POD) 標籤](#omnipod-pod-tab)部分。
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ orphan: true
以下過程將向你展示如何暫停和恢復胰島素幫浦的投放。
-*注意 – 如果你未看到暫停按鈕*,那麼他尚未啟用在 Omnipod (POD) 標籤中顯示。 在[Omnipod 設置](#omnipod-settings)中啟用**Omnipod 標籤中的顯示暫停交付按鈕**設置。
+*注意 – 如果你未看到暫停按鈕*,那麼他尚未啟用在 Omnipod (POD) 標籤中顯示。 Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### 暫停胰島素投放
@@ -433,7 +433,7 @@ orphan: true
- **總輸送量:** 顯示從儲液中輸送的胰島素總單位數。 *注意,這是一個近似值,因為幫浦啟動和填充過程並不精準。*
-- **錯誤:** 顯示遇到的最後一個錯誤。 檢查[藥囊歷史](#view-pod-history)、[RileyLink 歷史](#omnipod-eros-rileylink-and-active-pod-history)及日誌文件,以了解過去的錯誤及更多詳細訊息。
+- **錯誤:** 顯示遇到的最後一個錯誤。 Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **啟用 Pod 警報:** 保留目前啟用 Pod 上運作的警報。 通常在幫浦到期超過 72 小時且原生幫浦嗶聲警告運作時使用。
@@ -447,7 +447,7 @@ orphan: true
>
> 用於重新整理 Pod 狀態並消除顯示 (不確定) 訊息的狀態欄位。
>
- > 請參閱下面的[問題排除部分](#troubleshooting)以獲取額外訊息。
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **幫浦管理:**
From 7bc21f08acfc26fee2500973823fc47b82c28d73 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:43:58 +0200
Subject: [PATCH 177/303] New translations introduction.md (Chinese
Traditional)
---
docs/CROWDIN/zh_TW/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/zh_TW/Getting-Started/Introduction.md b/docs/CROWDIN/zh_TW/Getting-Started/Introduction.md
index 743a167794c2..d4a495153297 100644
--- a/docs/CROWDIN/zh_TW/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/zh_TW/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ David Burren [https://bionicwookie.com/](https://bionicwookie.com/)
*透過資料共享平台(包括Nightscout),所有來自**AAPS** 的資料都可以提供給醫療專業人士,Nightscout提供CGM資料的紀錄和實時監控,胰島素輸送、碳水化合物輸入、預測和設置。 Nightscout紀錄包括每日和每週的報告,這些報告可以幫助醫療專業人士更準確地討論1型糖尿病患者的血糖控制和行為考量。
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### 針對部分或完全失明的AAPS用戶的可及性
#### AAPS的日常使用:
From 9b14d9b1fd7f17b8846e638b74bc70d956b8a812 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:43:59 +0200
Subject: [PATCH 178/303] New translations preparingforaaps.md (Chinese
Traditional)
---
docs/CROWDIN/zh_TW/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/zh_TW/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/zh_TW/Getting-Started/PreparingForAaps.md
index 223a155af647..ef4b15f22ddf 100644
--- a/docs/CROWDIN/zh_TW/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/zh_TW/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ SGLT-2 抑制劑,也稱為 gliflozins,抑制腎臟對葡萄糖的再吸收
- “[如何安裝 AAPS](../SettingUpAaps/BuildingAaps.md)?” (D 部分),包括[問題排除](../GettingHelp/GeneralTroubleshooting.md)子部分。
-達到閉環控制的時間因人而異,但使用 AAPS 達到全閉環控制的大致時間表可以參考[>此處](#how-long-will-it-take-to-set-everything-up)。
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore 和配置設置匯出文件
@@ -188,7 +188,7 @@ SGLT-2 抑制劑,也稱為 gliflozins,抑制腎臟對葡萄糖的再吸收
### 醫療考量
-除了 [安全部分](#safety-first) 中的醫療警告外,根據你在幫浦中使用的胰島素類型,還有不同的參數需要考量。
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### 胰島素選擇
From 6e7d4f0565180a208c579a112c1536ee8160ce87 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:46:31 +0200
Subject: [PATCH 179/303] New translations compatiblepumps.md (Chinese
Traditional)
---
docs/CROWDIN/zh_TW/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/zh_TW/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/zh_TW/Getting-Started/CompatiblePumps.md
index 3cad900f6401..1e5024bc12a8 100644
--- a/docs/CROWDIN/zh_TW/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/zh_TW/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS 支援多種胰島素幫浦。 以下列表顯示目前支援的設備,
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (藍牙)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (藍牙)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (藍牙)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([需要額外通訊裝置](#additional-communication-device))
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (藍牙)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (藍牙)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (藍牙)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md)(藍牙)
-- 某些舊款[Medtronic](../CompatiblePumps/MedtronicPump.md) (需要額外通訊裝置)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## 我的幫浦不在列表中
From 867b5fe808e8bc430dcecd1478bf662cf54e567c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:46:33 +0200
Subject: [PATCH 180/303] New translations compatiblescgms.md (Chinese
Traditional)
---
docs/CROWDIN/zh_TW/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/zh_TW/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/zh_TW/Getting-Started/CompatiblesCgms.md
index 7058678a2300..354d0913e573 100644
--- a/docs/CROWDIN/zh_TW/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/zh_TW/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@
* [xDrip+設定](../CompatibleCgms/xDrip.md)
* [Nightscout 作為血糖資料來源](../CompatibleCgms/CgmNightscoutUpload.md): 儘管可以使用 Nightscout 作為閉環胰島素給藥的血糖資料來源,但**這種方法不推薦**,因為其依賴穩定的行動網路或 Wi-Fi 連接。 這意味著你的**CGM**資料只有在與你的 Nightscout 網站保持在線連接時,才會被**AAPS**接收。 為了更加穩定的設置,使用具有接收器的本地廣播的 CGM(如下所列)到**AAPS**,是一個更好的選擇。
-| CGM | 可用的[血糖資料來源](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ---------------------------------------------------- | -------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md)、DiaKEM 應用程式或 [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ 和 Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From be60c83be54f6f47935d691f10d8eaedb4e8bb32 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:47:38 +0200
Subject: [PATCH 181/303] New translations aapsscreens.md (Portuguese,
Brazilian)
---
.../pb/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/pb/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/pb/DailyLifeWithAaps/AapsScreens.md
index a3e7929bb79b..2bfbd3d1082e 100644
--- a/docs/CROWDIN/pb/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/pb/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ It is based on the expected drop in BG of the insulin in your system if no other
You can activate up to four additional graphs below the main graph. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### Calculator
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Calibrations
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Actions - section M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Button to start or cancel a temporary basal rate. Please note that the button changes from “TEMPBASAL” to “CANCEL x%” when a temporary basal rate is set.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* This option is only available for Dana RS and Insight pumps.
* Closed loop will automatically be stopped and switched to open loop mode for the time running extended bolus.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Careportal - section N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Careportal - section O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Prime/Fill allows you to record pump site and insulin cartridge change.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## History Browser
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From cd205df0944624f808509a897359317c94e18dc1 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:47:42 +0200
Subject: [PATCH 182/303] New translations keyaapsfeatures.md (Portuguese,
Brazilian)
---
docs/CROWDIN/pb/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/pb/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/pb/DailyLifeWithAaps/KeyAapsFeatures.md
index 58633596725b..55caca43cc16 100644
--- a/docs/CROWDIN/pb/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/pb/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ For example, if the highest basal rate in your profile was 0.5 U/h you could mul
- Insulin-resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. It is different for ever
- Insulin resistant adult: 25
- Pregnant: 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ If you have this option enabled, the insulin sensitivity will be decreased while
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). It will try and figure out how sensitive/resistant you are based on these deviations and adjust basal rate and ISF based on these deviations.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Insulin resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Maximum basal IOB OpenAPS can deliver \[U\] (OpenAPS "max-iob")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Insulin resistant adult: 12
- Pregnant: 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Enable AMA Autosens
From 22856413f52fb9b5ebabadf41322d405e76b71ba Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:48:21 +0200
Subject: [PATCH 183/303] New translations devbranch.md (Portuguese, Brazilian)
---
docs/CROWDIN/pb/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/pb/AdvancedOptions/DevBranch.md b/docs/CROWDIN/pb/AdvancedOptions/DevBranch.md
index dd410c1dea17..5d180057f9e5 100644
--- a/docs/CROWDIN/pb/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/pb/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From d6ec69ffaa1c5e16430a36d5f94f6f4fb27090be Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:51:15 +0200
Subject: [PATCH 184/303] New translations diaconng8.md (Portuguese, Brazilian)
---
docs/CROWDIN/pb/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/pb/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/pb/CompatiblePumps/DiaconnG8.md
index bc512f6db641..46d88dc8da63 100644
--- a/docs/CROWDIN/pb/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/pb/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Extended Bolus function
- If you use extended bolus it will disable closed loop.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From daf183fd656cf78e43307b6a3e6170fec7fe0bda Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:51:20 +0200
Subject: [PATCH 185/303] New translations releasenotes.md (Portuguese,
Brazilian)
---
docs/CROWDIN/pb/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/pb/Maintenance/ReleaseNotes.md b/docs/CROWDIN/pb/Maintenance/ReleaseNotes.md
index 78534579cc99..7d720070e53d 100644
--- a/docs/CROWDIN/pb/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/pb/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Release date: 23-01-2021
- NSClient fixes
- Bolus advisor now works with Pumpcontrol and NSClient
+(version-2811)=
+
## Version 2.8.1.1
Release date: 12-01-2021
From c3dc613c2e66f0f9341695b33eb2557a26e469b0 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:51:23 +0200
Subject: [PATCH 186/303] New translations automations.md (Portuguese,
Brazilian)
---
docs/CROWDIN/pb/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/pb/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/pb/DailyLifeWithAaps/Automations.md
index 5f548fb2e1cd..b809cb1962ba 100644
--- a/docs/CROWDIN/pb/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/pb/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From e6e0daee37b3fb7b5b50623062c052f5ab38f371 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:51:26 +0200
Subject: [PATCH 187/303] New translations extendedcarbs.md (Portuguese,
Brazilian)
---
docs/CROWDIN/pb/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/pb/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/pb/DailyLifeWithAaps/ExtendedCarbs.md
index bbbb3c44d752..7f7d23f972c4 100644
--- a/docs/CROWDIN/pb/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/pb/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ A scenario e.g. for a Pizza might be to give a (partial) bolus up front via the
**Important notes:** You'll need to try out and see which concrete values work for you of course. You might also carefully adjust the setting *max minutes of basal to limit SMB to* to make the algorithm more or less aggressive. With low carb, high fat/protein meals it may be enough to only use eCarbs without manual boluses (see the blog post above). When eCarbs are generated, a Careportal note is also created to document all inputs, to make it easier to iterate and improve inputs.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Extended bolus and why they won't work in closed-loop environment?
As mentioned above extended or multiwave boluses do not really work in a closed loop environment. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ That's why as of version 2.6 there is an option for an extended bolus for users

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Why extended boluses won't work in a closed loop environment
1. The loop determines that now 1.55U/h is to be delivered. Whether this is delivered as an extended bolus or TBR does not matter to the algorithm. In fact, some of the pumps use the extended bolus. What should happen then? Most pump drivers then stop the extended bolus -> You didn't even need to start it.
From 63fde66e7ddb2cda068b74ca415779c82e1b9e36 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:52:04 +0200
Subject: [PATCH 188/303] New translations omnipoderos.md (Portuguese,
Brazilian)
---
.../CROWDIN/pb/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/pb/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/pb/CompatiblePumps/OmnipodEros.md
index dd2fd8786302..6617cdbcb305 100644
--- a/docs/CROWDIN/pb/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/pb/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ On the **RileyLink Selection** screen press the **Scan** button and select your
Press the **Next** button to proceed with the rest of the **Setup Wizard.** It can take up to one minute for the selected RileyLink to initialize and the **Next** button to become active.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**OR**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via the top-left hand corner **hamburger menu** under **Config Builder (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. Selecting the **checkbox (4)** next to the **Settings Gear (3)** will display the Omnipod menu as a tab in the AAPS interface titled **POD**. This is referred to in this documentation as the **Omnipod (POD)** tab.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Please **swipe left** to the **Omnipod (POD)** tab where you will be able to man
### RileyLink Setup
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Note: A good visual indicator that the RileyLink is not connected is that the Insulin and Calculator buttons on the HOME tab will be missing. This will also occur for about the first 30 seconds after AAPS starts, as it is actively connecting to the RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. After selecting the Omnipod driver, identify and select your RileyLink from **Config Builder (1)** ➜**Pump**➜**Omnipod**➜**Gear Icon (Settings) (2)** ➜**RileyLink Configuration (3)** by pressing the **Not Set** or **MAC Address (if present)** text.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Before you can activate a pod please ensure you have properly configured and connected your RileyLink connection in the Omnipod settings
-*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigate to the **Omnipod (POD)** tab and click on the **POD MGMT (1)** button, and then click on **Activate Pod (2)**.
@@ -143,7 +143,7 @@ Before you can activate a pod please ensure you have properly configured and con
>
> Ensure the new pod and RileyLink are within close proximity of each other (~30cm or less) and click the **Next** button.
-03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Before you can activate a pod please ensure you have properly configured and con
Click on the back button on your phone to return to the **Omnipod (POD)** tab screen which will now display Pod information for your active pod session, including current basal rate, pod reservoir level, insulin delivered, pod errors and alerts.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
The process below will show you how to suspend and resume insulin pump delivery.
-*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspending Insulin Delivery
@@ -433,7 +433,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
- **Total delivered:** Displays the total number of units of insulin delivered from the reservoir. *Note this is an approximation as priming and filling the pod is not an exact process.*
-- **Errors:** Displays the last error encountered. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Errors:** Displays the last error encountered. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Active pod alerts:** Reserved for currently running alerts on the active pod. Normally used when pod expiration is past 72 hours and native pod beep alerts are running.
@@ -447,7 +447,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
>
> Use to refresh the pod status and dismiss status fields that contain the text (uncertain).
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From 703c23ab01cc2a2c524d84db7fbf6cb4efd10662 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:52:19 +0200
Subject: [PATCH 189/303] New translations introduction.md (Portuguese,
Brazilian)
---
docs/CROWDIN/pb/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/pb/Getting-Started/Introduction.md b/docs/CROWDIN/pb/Getting-Started/Introduction.md
index c7c99d98627f..589efeb25ee3 100644
--- a/docs/CROWDIN/pb/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/pb/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ The above table assumes that the user has access to both continuous gluocse moni
*All data from **AAPS** can be made available to healthcare professionals via data sharing platforms, including Nightscout that provides logging and real time monitoring of CGM data, insulin delivery, carbohydrate entries, predictions and settings. Nightscout records include daily and weekly reports which can aid healthcare professionals' discussions with type 1 patients with more accurate data on glycemic control and any behavioural considerations.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibility for users AAPS who are partially or completely blind
#### Day to day AAPS use:
From dfb7d7387a6cdd915cea166a5a67b121c8f20be8 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:52:20 +0200
Subject: [PATCH 190/303] New translations preparingforaaps.md (Portuguese,
Brazilian)
---
docs/CROWDIN/pb/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/pb/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/pb/Getting-Started/PreparingForAaps.md
index 5bfd1c4195fe..67246110210b 100644
--- a/docs/CROWDIN/pb/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/pb/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ To aid the build process there are dedicated sections:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore & configuration settings export file
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Medical considerations
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulin choice
From ccf745ee6c64ca5877733e770d15ee06dd5b589b Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:54:47 +0200
Subject: [PATCH 191/303] New translations compatiblepumps.md (Portuguese,
Brazilian)
---
docs/CROWDIN/pb/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/pb/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/pb/Getting-Started/CompatiblePumps.md
index 5dd27835c82c..a59ba099938e 100644
--- a/docs/CROWDIN/pb/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/pb/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From c2d346ac50a44a848def2f901abae41ab2a35872 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:54:49 +0200
Subject: [PATCH 192/303] New translations compatiblescgms.md (Portuguese,
Brazilian)
---
docs/CROWDIN/pb/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/pb/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/pb/Getting-Started/CompatiblesCgms.md
index 5253fce5cd34..2764c11c2b9c 100644
--- a/docs/CROWDIN/pb/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/pb/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| CGM | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From eab3b0fd686cb56410f47ec074f190763033a58c Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:55:29 +0200
Subject: [PATCH 193/303] New translations browserbuild.md (Romanian)
---
docs/CROWDIN/ro/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/ro/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/ro/SettingUpAaps/BrowserBuild.md
index 58d102478ac2..019b5f55d6ef 100644
--- a/docs/CROWDIN/ro/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/ro/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From f293bd61d88d557d5922926110892b780dba23d5 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:55:56 +0200
Subject: [PATCH 194/303] New translations browserbuild.md (French)
---
docs/CROWDIN/fr/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/fr/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/fr/SettingUpAaps/BrowserBuild.md
index 35442ea01dc4..869433a907b3 100644
--- a/docs/CROWDIN/fr/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/fr/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From 3d4b616ea9a4e12cd4b3c502dbfed28a0b18dd70 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:00 +0200
Subject: [PATCH 195/303] New translations browserbuild.md (Spanish)
---
docs/CROWDIN/es/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/es/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/es/SettingUpAaps/BrowserBuild.md
index 9dfa870ee957..3c3913e57dd6 100644
--- a/docs/CROWDIN/es/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/es/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From d8989b8bc15dee15965ba659c50b85480063f323 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:05 +0200
Subject: [PATCH 196/303] New translations browserbuild.md (Czech)
---
docs/CROWDIN/cs/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/cs/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/cs/SettingUpAaps/BrowserBuild.md
index 7b1c1bbec111..a42e0bbdf355 100644
--- a/docs/CROWDIN/cs/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/cs/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From 094fdee548f8a56515012603e8a2565f4614fd62 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:10 +0200
Subject: [PATCH 197/303] New translations browserbuild.md (German)
---
docs/CROWDIN/de/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/de/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/de/SettingUpAaps/BrowserBuild.md
index fad11125d963..9bd2fbbb26f8 100644
--- a/docs/CROWDIN/de/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/de/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From 2c1d9783fd9eac65eab693e8d139683a17fa8611 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:15 +0200
Subject: [PATCH 198/303] New translations browserbuild.md (Greek)
---
docs/CROWDIN/el/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/el/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/el/SettingUpAaps/BrowserBuild.md
index df2803225515..1cec26c8b757 100644
--- a/docs/CROWDIN/el/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/el/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From adf8e4f2849a460a18d9ed5daf92e3f5168e7507 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:19 +0200
Subject: [PATCH 199/303] New translations browserbuild.md (Hebrew)
---
docs/CROWDIN/he/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/he/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/he/SettingUpAaps/BrowserBuild.md
index 9d088f95247a..0a809081c75c 100644
--- a/docs/CROWDIN/he/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/he/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From 7694efbc61ab9e2f078a268f03d61d991fd861c0 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:23 +0200
Subject: [PATCH 200/303] New translations browserbuild.md (Korean)
---
docs/CROWDIN/ko/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/ko/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/ko/SettingUpAaps/BrowserBuild.md
index 3c81cbe80ffa..e39ec8a73761 100644
--- a/docs/CROWDIN/ko/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/ko/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From 3fbe92e178d0a1be6069a9ea166119d914969ce8 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:27 +0200
Subject: [PATCH 201/303] New translations browserbuild.md (Lithuanian)
---
docs/CROWDIN/lt/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/lt/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/lt/SettingUpAaps/BrowserBuild.md
index 4c1899189691..959deaeb6bc4 100644
--- a/docs/CROWDIN/lt/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/lt/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From 08b3b53d9186943fe1e6cf57f8d8d3e8face6b70 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:31 +0200
Subject: [PATCH 202/303] New translations browserbuild.md (Dutch)
---
docs/CROWDIN/nl/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/nl/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/nl/SettingUpAaps/BrowserBuild.md
index 2adabcefcd28..ef529b419200 100644
--- a/docs/CROWDIN/nl/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/nl/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From cbdc6578c22e6ba55cd462715c946a87dfb8ac3f Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:36 +0200
Subject: [PATCH 203/303] New translations browserbuild.md (Polish)
---
docs/CROWDIN/pl/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/pl/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/pl/SettingUpAaps/BrowserBuild.md
index 58d102478ac2..019b5f55d6ef 100644
--- a/docs/CROWDIN/pl/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/pl/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From d170a503e2fe85be98384c44324aeb439dd369d1 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:40 +0200
Subject: [PATCH 204/303] New translations browserbuild.md (Portuguese)
---
docs/CROWDIN/pt/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/pt/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/pt/SettingUpAaps/BrowserBuild.md
index 59c8e065b7e2..1cd7ac15df27 100644
--- a/docs/CROWDIN/pt/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/pt/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From 752a3aa7b103c9f8d66956f318d418b60ae3d812 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:44 +0200
Subject: [PATCH 205/303] New translations browserbuild.md (Russian)
---
docs/CROWDIN/ru/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/ru/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/ru/SettingUpAaps/BrowserBuild.md
index 0a14901d6817..8aabc6f011ab 100644
--- a/docs/CROWDIN/ru/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/ru/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From e6e9338eafb483ac16fbcb7f8dd6bebc8193b953 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:51 +0200
Subject: [PATCH 206/303] New translations devbranch.md (Romanian)
---
docs/CROWDIN/ro/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/ro/AdvancedOptions/DevBranch.md b/docs/CROWDIN/ro/AdvancedOptions/DevBranch.md
index dd410c1dea17..5d180057f9e5 100644
--- a/docs/CROWDIN/ro/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/ro/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From 4a94658010d942d8f7b6aff24ef02f87869fb5db Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:54 +0200
Subject: [PATCH 207/303] New translations browserbuild.md (Slovak)
---
docs/CROWDIN/sk/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/sk/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/sk/SettingUpAaps/BrowserBuild.md
index 58d102478ac2..019b5f55d6ef 100644
--- a/docs/CROWDIN/sk/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/sk/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From 5d4e071221aa58f4daedb0b5a1f5a12d4d25adca Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:56:58 +0200
Subject: [PATCH 208/303] New translations browserbuild.md (Turkish)
---
docs/CROWDIN/tr/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/tr/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/tr/SettingUpAaps/BrowserBuild.md
index b00149cb6cb1..4c1d98f02716 100644
--- a/docs/CROWDIN/tr/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/tr/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From a5a01cc877d76b20e74c91563dc422be6b03e0e2 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:57:02 +0200
Subject: [PATCH 209/303] New translations browserbuild.md (Chinese Simplified)
---
.../zh_CN/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/zh_CN/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/zh_CN/SettingUpAaps/BrowserBuild.md
index 04da22558992..fe68753b96de 100644
--- a/docs/CROWDIN/zh_CN/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/zh_CN/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From 49e19fc626e47aa42e826880cc28c1e43b1a7a2f Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:57:07 +0200
Subject: [PATCH 210/303] New translations browserbuild.md (Chinese
Traditional)
---
.../zh_TW/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/zh_TW/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/zh_TW/SettingUpAaps/BrowserBuild.md
index 17f0647b16d1..ad505f1bd7d8 100644
--- a/docs/CROWDIN/zh_TW/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/zh_TW/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions 以建置 AAPS APK
- 適合一般使用者。
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - 在 GitHub 中,前往 Actions,選擇 AAPS-CI,然後點擊運行工作流以開始建置 APK。
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*注意: Android 和 Android Wear 應用程式將自動建置。*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - 請參考 [變體](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### 檢查 GitHub Actions 權限設定
- 請確保 GitHub Actions 政策設置為「Allow all actions and reusable workflows」(Settings → Actions → General)。
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From 56067dee58f52adf103bdcb5a7e480ba616edea9 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 04:57:11 +0200
Subject: [PATCH 211/303] New translations browserbuild.md (Portuguese,
Brazilian)
---
docs/CROWDIN/pb/SettingUpAaps/BrowserBuild.md | 57 +++++++++++++------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/docs/CROWDIN/pb/SettingUpAaps/BrowserBuild.md b/docs/CROWDIN/pb/SettingUpAaps/BrowserBuild.md
index 58d102478ac2..019b5f55d6ef 100644
--- a/docs/CROWDIN/pb/SettingUpAaps/BrowserBuild.md
+++ b/docs/CROWDIN/pb/SettingUpAaps/BrowserBuild.md
@@ -225,29 +225,48 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
(github-build-apk)=
## AAPS-CI GitHub Actions to Build the AAPS APK
- Suitable for general users.
-```{eval-rst}
-.. raw:: html
-
-
+```{tab-set}
+
+:::{tab-item} YouTube
+
+:::
+
+:::{tab-item} Wiki
+:::{include} BrowserBuildCIS.md
+:::
+
```
- - In GitHub, go to Actions, select AAPS-CI, and click Run workflow to start building the APK.
+
+### Build Version selection
+
+**Only AAPS versions from 3.3.2.1 and above will build with the Browser method.**
+
+
+
+(variant)=
+
+### Build Variants selection
*Note: both Android and Android Wear apps will be built automatically.*
- 
+ - Select the variant you need:
+ - fullRelease: For regular pump usage with full functionality.
+ - [aapsclientRelease, aapsclient2Release](#RemoteControl_aapsclient): For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
+ - pumpcontrolRelease: To replace your pump app/controller
+
+
- - variant:
- - Please refer to [variant](variant)
+Variants ending with “Debug” indicates that the APK will be built in debug mode, which is useful for developers for troubleshooting.
@@ -270,7 +289,9 @@ GitHub will now be able to store the AAPS apk file in your Google Drive, once bu
### Check GitHub Actions Permission Settings
- Make sure GitHub Actions policies are set to “Allow all actions and reusable workflows” (Settings → Actions → General).
- 
+ 
+
+`actions/checkout@v4` and `actions/setup-java@v4` are not allowed to be used in `xxxxx/AndroidAPS`. Actions in this workflow must be: within a repository owned by `xxxxx`
--------
From c251c1aaa2ca1072bf293745f7ce78b3fa0f1522 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:00:05 +0200
Subject: [PATCH 212/303] New translations diaconng8.md (Romanian)
---
docs/CROWDIN/ro/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/ro/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/ro/CompatiblePumps/DiaconnG8.md
index bc512f6db641..46d88dc8da63 100644
--- a/docs/CROWDIN/ro/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/ro/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Extended Bolus function
- If you use extended bolus it will disable closed loop.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From e0ca45dc01895c2330ce20aa15b603b3faa970d5 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:00:12 +0200
Subject: [PATCH 213/303] New translations releasenotes.md (Romanian)
---
docs/CROWDIN/ro/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/ro/Maintenance/ReleaseNotes.md b/docs/CROWDIN/ro/Maintenance/ReleaseNotes.md
index 5d9468c62ec9..30b0e4b96e16 100644
--- a/docs/CROWDIN/ro/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/ro/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Data lansării: 23-01-2021
- NSClient fixes
- Bolus advisor now works with Pumpcontrol and NSClient
+(version-2811)=
+
## Versiunea 2.8.1.1
Data lansării: 12-01-2021
From 66f55268a2fbf08bbc0bcd292c392085ea30ce2f Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:00:15 +0200
Subject: [PATCH 214/303] New translations automations.md (Romanian)
---
docs/CROWDIN/ro/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/ro/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/ro/DailyLifeWithAaps/Automations.md
index 2f99cb9d114f..db7160cd76fb 100644
--- a/docs/CROWDIN/ro/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/ro/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From b89df976c972391dae7ef5ee3a529e9f169fd080 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:00:19 +0200
Subject: [PATCH 215/303] New translations extendedcarbs.md (Romanian)
---
docs/CROWDIN/ro/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/ro/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/ro/DailyLifeWithAaps/ExtendedCarbs.md
index bbbb3c44d752..7f7d23f972c4 100644
--- a/docs/CROWDIN/ro/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/ro/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ A scenario e.g. for a Pizza might be to give a (partial) bolus up front via the
**Important notes:** You'll need to try out and see which concrete values work for you of course. You might also carefully adjust the setting *max minutes of basal to limit SMB to* to make the algorithm more or less aggressive. With low carb, high fat/protein meals it may be enough to only use eCarbs without manual boluses (see the blog post above). When eCarbs are generated, a Careportal note is also created to document all inputs, to make it easier to iterate and improve inputs.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Extended bolus and why they won't work in closed-loop environment?
As mentioned above extended or multiwave boluses do not really work in a closed loop environment. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ That's why as of version 2.6 there is an option for an extended bolus for users

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Why extended boluses won't work in a closed loop environment
1. The loop determines that now 1.55U/h is to be delivered. Whether this is delivered as an extended bolus or TBR does not matter to the algorithm. In fact, some of the pumps use the extended bolus. What should happen then? Most pump drivers then stop the extended bolus -> You didn't even need to start it.
From ad40f603c4b9255741db13b75c10c21f032370c6 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:00:58 +0200
Subject: [PATCH 216/303] New translations omnipoderos.md (Romanian)
---
.../CROWDIN/ro/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/ro/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/ro/CompatiblePumps/OmnipodEros.md
index 6c7d762e1c18..634b6d5ef153 100644
--- a/docs/CROWDIN/ro/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/ro/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ On the **RileyLink Selection** screen press the **Scan** button and select your
Press the **Next** button to proceed with the rest of the **Setup Wizard.** It can take up to one minute for the selected RileyLink to initialize and the **Next** button to become active.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**OR**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via the top-left hand corner **hamburger menu** under **Config Builder (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. Selecting the **checkbox (4)** next to the **Settings Gear (3)** will display the Omnipod menu as a tab in the AAPS interface titled **POD**. This is referred to in this documentation as the **Omnipod (POD)** tab.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Please **swipe left** to the **Omnipod (POD)** tab where you will be able to man
### RileyLink Setup
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Note: A good visual indicator that the RileyLink is not connected is that the Insulin and Calculator buttons on the HOME tab will be missing. This will also occur for about the first 30 seconds after AAPS starts, as it is actively connecting to the RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. After selecting the Omnipod driver, identify and select your RileyLink from **Config Builder (1)** ➜**Pump**➜**Omnipod**➜**Gear Icon (Settings) (2)** ➜**RileyLink Configuration (3)** by pressing the **Not Set** or **MAC Address (if present)** text.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Once selected, you can proceed to activate your first pod session. Use the back button on your phone to return to the main AAPS interface.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Before you can activate a pod please ensure you have properly configured and connected your RileyLink connection in the Omnipod settings
-*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*REMINDER: Pod communication occurs at limited ranges for pod activation pairing due to security safety measures. Before pairing the Pod's radio signal is weaker, however after it has been paired it will operate at full signal power. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Navigate to the **Omnipod (POD)** tab and click on the **POD MGMT (1)** button, and then click on **Activate Pod (2)**.
@@ -143,7 +143,7 @@ Before you can activate a pod please ensure you have properly configured and con
>
> Ensure the new pod and RileyLink are within close proximity of each other (~30cm or less) and click the **Next** button.
-03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. On the **Initialize Pod** screen, the pod will begin priming (you will hear a click followed by a series of ticking sounds as the pod primes itself). If RileyLink is out of range of the pod being activated, you will receive an error message **No response from Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Before you can activate a pod please ensure you have properly configured and con
Click on the back button on your phone to return to the **Omnipod (POD)** tab screen which will now display Pod information for your active pod session, including current basal rate, pod reservoir level, insulin delivered, pod errors and alerts.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
The process below will show you how to suspend and resume insulin pump delivery.
-*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*NOTE - if you do not see a SUSPEND button*, then it has not been enabled to display in the Omnipod (POD) tab. Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspending Insulin Delivery
@@ -433,7 +433,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
- **Total delivered:** Displays the total number of units of insulin delivered from the reservoir. *Note this is an approximation as priming and filling the pod is not an exact process.*
-- **Errors:** Displays the last error encountered. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Errors:** Displays the last error encountered. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Active pod alerts:** Reserved for currently running alerts on the active pod. Normally used when pod expiration is past 72 hours and native pod beep alerts are running.
@@ -447,7 +447,7 @@ Below is an explanation of the layout and meaning of the icons and status fields
>
> Use to refresh the pod status and dismiss status fields that contain the text (uncertain).
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **POD MGMT:**
From d0925d228296bf558df82d1ad6da2e55c5f7119b Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:01:14 +0200
Subject: [PATCH 217/303] New translations introduction.md (Romanian)
---
docs/CROWDIN/ro/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/ro/Getting-Started/Introduction.md b/docs/CROWDIN/ro/Getting-Started/Introduction.md
index e8387262a9eb..36889b2df600 100644
--- a/docs/CROWDIN/ro/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/ro/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ The above table assumes that the user has access to both continuous gluocse moni
*All data from **AAPS** can be made available to healthcare professionals via data sharing platforms, including Nightscout that provides logging and real time monitoring of CGM data, insulin delivery, carbohydrate entries, predictions and settings. Nightscout records include daily and weekly reports which can aid healthcare professionals' discussions with type 1 patients with more accurate data on glycemic control and any behavioural considerations.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibility for users AAPS who are partially or completely blind
#### Day to day AAPS use:
From 96ed2712846a000a461e4493d058aea6e68e4ada Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:01:15 +0200
Subject: [PATCH 218/303] New translations preparingforaaps.md (Romanian)
---
docs/CROWDIN/ro/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/ro/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/ro/Getting-Started/PreparingForAaps.md
index 5bfd1c4195fe..67246110210b 100644
--- a/docs/CROWDIN/ro/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/ro/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ To aid the build process there are dedicated sections:
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#how-long-will-it-take-to-set-everything-up))
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Keystore & configuration settings export file
@@ -188,7 +188,7 @@ Once you are fully operational on **AAPS**, you will still need to regularly fin
### Medical considerations
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Insulin choice
From dd1e6775dca4c13fe8540953fc8d9c621344b30a Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:03:44 +0200
Subject: [PATCH 219/303] New translations compatiblepumps.md (Romanian)
---
docs/CROWDIN/ro/Getting-Started/CompatiblePumps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/ro/Getting-Started/CompatiblePumps.md b/docs/CROWDIN/ro/Getting-Started/CompatiblePumps.md
index 5dd27835c82c..a59ba099938e 100644
--- a/docs/CROWDIN/ro/Getting-Started/CompatiblePumps.md
+++ b/docs/CROWDIN/ro/Getting-Started/CompatiblePumps.md
@@ -9,12 +9,12 @@ AAPS works with a number of insulin pumps. The following list shows the current
- [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (Bluetooth)
- [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md) (Bluetooth)
- [EOPatch2](../CompatiblePumps/EOPatch2.md) (Bluetooth)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
- [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md) (Bluetooth)
- [Medtrum Nano](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Medtrum 300U](../CompatiblePumps/MedtrumNano.md) (Bluetooth)
- [Equil 5.3](../CompatiblePumps/Equil5.3.md) (Bluetooth)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#additional-communication-device) needed)
+- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
## My pump is not listed
From 2c9ca76537a51f1550b0c9f9c89cdb36051335f0 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:03:45 +0200
Subject: [PATCH 220/303] New translations compatiblescgms.md (Romanian)
---
docs/CROWDIN/ro/Getting-Started/CompatiblesCgms.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/ro/Getting-Started/CompatiblesCgms.md b/docs/CROWDIN/ro/Getting-Started/CompatiblesCgms.md
index 5253fce5cd34..2764c11c2b9c 100644
--- a/docs/CROWDIN/ro/Getting-Started/CompatiblesCgms.md
+++ b/docs/CROWDIN/ro/Getting-Started/CompatiblesCgms.md
@@ -9,7 +9,7 @@ This section provides a brief overview of all compatible **CGMs/FGMs** with **AA
* [xDrip+Settings](../CompatibleCgms/xDrip.md)
* [Nightscout as BG Source](../CompatibleCgms/CgmNightscoutUpload.md): While it's possible to use Nightscout as a BG source for closed-loop insulin delivery, **this method is not recommended** due to its reliance on stable mobile data or Wi-Fi connectivity. This means your **CGM** data would only be received by **AAPS** when you have an online connection to your Nightscout site. For a more reliable set up, using a CGM with local broadcast from the receiver (as listed below) to **AAPS**, is a much better option.
-| CGM | Available [BG Sources](../SettingUpAaps/ConfigBuilder.md#bg-source) |
+| CGM | Available [BG Sources](#Config-Builder-bg-source) |
| ------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
| [Dexcom G7](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md), DiaKEM app or [Juggluco](../CompatibleCgms/Juggluco.md) |
| [Dexcom ONE+ and Stelo](../CompatibleCgms/DexcomG7.md) | [xDrip+](../CompatibleCgms/xDrip.md) |
From 06d3b537aedd4e3e32da9d485051efef09c56731 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:04:48 +0200
Subject: [PATCH 221/303] New translations aapsscreens.md (French)
---
.../fr/DailyLifeWithAaps/AapsScreens.md | 22 +++++++++++--------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/docs/CROWDIN/fr/DailyLifeWithAaps/AapsScreens.md b/docs/CROWDIN/fr/DailyLifeWithAaps/AapsScreens.md
index d288ae131dcc..256bf365cc86 100644
--- a/docs/CROWDIN/fr/DailyLifeWithAaps/AapsScreens.md
+++ b/docs/CROWDIN/fr/DailyLifeWithAaps/AapsScreens.md
@@ -19,6 +19,8 @@ This is the first screen you will come across when you open **AAPS**, and it con
* Alternatively you can change screens by swiping left or right.
* Displayed tabs can be selected in the [config builder](#Config-Builder-tab-or-hamburger-menu).
+(aaps-screens-profile--target)=
+
### Section B - Profile & target
#### Current Profile
@@ -295,7 +297,7 @@ Elle indique la capacité de l'insuline présente dans votre corps à faire bais
Vous pouvez activer jusqu'à quatre graphiques supplémentaires en dessous du graphique principal. When in [Simple Mode](#preferences-simple-mode), additional graphs are preset and can not be changed. Switch off **Simple Mode** if you wish to set your own configuration of additional graphs.
-To open settings for additional graphs click the triangle on the right side of the [main graph](#section-f---main-graph) and scroll down.
+To open settings for additional graphs click the triangle on the right side of the [main graph](#aaps-screens-main-graph) and scroll down.

@@ -378,7 +380,7 @@ About using the Insulin, Carbs and Calculator buttons : If enabled in the [Prefe

-To give a certain amount of insulin without using the [bolus calculator](#bolus-wizard).
+To give a certain amount of insulin without using the [bolus calculator](#aaps-screens-bolus-wizard).
By checking the box **Start eating soon TT**, you can automatically start your [eating soon temp target](#TempTargets-eating-soon-temp-target).
@@ -406,7 +408,7 @@ You can use the buttons to quickly increase the carb amount. The increment value
#### Assistant
-See Bolus Wizard [section below](#bolus-wizard).
+See Bolus Wizard [section below](#aaps-screens-bolus-wizard).
#### Étalonnages
@@ -503,18 +505,20 @@ For details, see the hints on [COB calculation page](#CobCalculation-detection-o
### Actions - section M
-Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#section-b---profile--target) on homescreen.
+Button **[Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)** as an alternative to pressing the [current profile](#aaps-screens-profile--target) on homescreen.
-Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#section-b---profile--target) on homescreen.
+Button **[Temporary target](../DailyLifeWithAaps/TempTargets.md)** as an alternative to pressing the [current target](#aaps-screens-profile--target) on homescreen.
Le bouton pour démarrer ou annuler un débit basal temporaire. Veuillez noter que le bouton passe de "BASAL TEMPORAIRE" à "ANNULER x%" lorsqu'un débit de base temporaire est défini.
-Even though [extended boluses](#Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
+Even though [extended boluses](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) do not really work in a closed loop environment some people were asking for an option to use extended bolus anyway.
* Cette option n'est disponible que pour les pompes Dana RS et Insight.
* La boucle fermée sera automatiquement arrêtée et basculera en mode boucle ouverte pour la durée du bolus étendu.
* Make sure to read the [details](../DailyLifeWithAaps/ExtendedCarbs.md) before using this option.
+(aaps-screens-careportal)=
+
### Careportal - section N
Displays information on:
@@ -536,7 +540,7 @@ Thresholds can be set in [Preferences > Overview > Status lights](#Preferences-s
### Careportal - section O
-BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#careportal---section-n).
+BG check, prime/fill, sensor insert and pump battery change are the base for the data displayed in [section N](#aaps-screens-careportal).
Amocer/Remplir vous permet d'enregistrer le changement de site et de la cartouche d'insuline de la pompe.
@@ -647,7 +651,7 @@ On this tab you can view the bolus and carbs log. Each bolus (line **1** and **4
* Meal (manually entered though the Insulin, Quick Wizard or Bolus Wizard buttons)
* SMB, when using the SMB Functionality
-The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
+The carbs (line **2**) are only stored in Nightscout. If you have used the [Bolus Wizard](#aaps-screens-bolus-wizard) to calculate insulin dosage, you can press the “Calc” text (line **3**) to show the details of how the bolus was calculated.
Depending on the pump used, insulin and carbs can be shown in one single line, or will result in multiple lines: one for the calculation detail, one for the carbs, one for the bolus itself.
@@ -702,7 +706,7 @@ This tab shows all notes and alerts recorded in Nightscout.
## Historique
-This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#action-tab).
+This view can be accessed by pressing the 3 dots on the right of the menu, then History. It is not possible to put in the main menu through the Config Builder. It can also be accessed through a button at the bottom of the [Action tab](#screens-action-tab).
Allows you to ride back in **AAPS** history. See the dedicated page [Reviewing your data > History Browser](../Maintenance/Reviewing.md).
From f7be6083ba297d7fec2c86c940901ca8720aff94 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:04:51 +0200
Subject: [PATCH 222/303] New translations keyaapsfeatures.md (French)
---
docs/CROWDIN/fr/DailyLifeWithAaps/KeyAapsFeatures.md | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/docs/CROWDIN/fr/DailyLifeWithAaps/KeyAapsFeatures.md b/docs/CROWDIN/fr/DailyLifeWithAaps/KeyAapsFeatures.md
index 02c186a8f895..5e640a7d6cef 100644
--- a/docs/CROWDIN/fr/DailyLifeWithAaps/KeyAapsFeatures.md
+++ b/docs/CROWDIN/fr/DailyLifeWithAaps/KeyAapsFeatures.md
@@ -72,7 +72,7 @@ Par exemple, si le dosage basal le plus élevé de votre profil est de 0,5 U/h,
- Adulte résistant à l'insuline : 12
- Grossesse : 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
(Open-APS-features-maximum-total-iob-openaps-cant-go-over)=
@@ -97,7 +97,7 @@ Be careful and patient when adjusting your **max-IOB**. Cette valeur est différ
- Adulte résistant à l'insuline : 25
- Grossesse : 40
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
Note : When using **SMB**, the **max-IOB** is calculated differently than in AMA. In **AMA**, maxIOB is a safety-parameter for basal **IOB**, while in SMB-mode, it also includes bolus IOB.
@@ -117,7 +117,7 @@ Si vous activez cette option, la sensibilité à l'insuline sera diminuée avec
### Enable Autosens feature
-This is the [Autosens](#autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
+This is the [Autosens](#Open-APS-features-autosens) feature. When using DynamicISF, Autosens can not be used, since they are two different algorithms altering the same variable (sensitivity).
Autosens looks at blood glucose deviations (positive/negative/neutral). Il essaiera de comprendre à quel point vous êtes sensible/résistant en fonction de ces écarts et ajustera le débit basal et la SI en fonction de ces écarts.
@@ -268,7 +268,7 @@ The hardcoded parameters in **AAPS** are:
- Adulte résistant à l'insuline : 12
- Grossesse : 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### IA basale max que OpenAPS pourra délivrer \[U\] (OpenAPS "max-iob")
@@ -282,7 +282,7 @@ The default value is 2, but you should rise this parameter slowly to see how muc
- Adulte résistant à l'insuline : 12
- Grossesse : 25
-*See also [overview of hard-coded limits](#overview-of-hard-coded-limits).*
+*See also [overview of hard-coded limits](#Open-APS-features-overview-of-hard-coded-limits).*
### Activer AMA Autosens
From 603c315bd40dfe984a0a2edfc037032737d96792 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:05:31 +0200
Subject: [PATCH 223/303] New translations devbranch.md (French)
---
docs/CROWDIN/fr/AdvancedOptions/DevBranch.md | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/docs/CROWDIN/fr/AdvancedOptions/DevBranch.md b/docs/CROWDIN/fr/AdvancedOptions/DevBranch.md
index b8cc817d8f7d..ac7611d49659 100644
--- a/docs/CROWDIN/fr/AdvancedOptions/DevBranch.md
+++ b/docs/CROWDIN/fr/AdvancedOptions/DevBranch.md
@@ -55,14 +55,4 @@ Available from 3.3.2.1.dev
- variant:
- - Please refer to
-
- (variant)=
-
- ### variant
-
- - Select the variant you need:
- - fullRelease: For regular pump usage with full functionality.
- - [aapsclient, aapsclient2](#RemoteControl_aapsclient) For caregivers (requires [Nightscout](../SettingUpAaps/Nightscout.md))。
- - pumpcontrol
- - Text ending with “Debug” indicates that the APK will be built in debug mode, which is useful for troubleshooting.
\ No newline at end of file
+ - Please refer to
\ No newline at end of file
From a4256669a49c45542a3ea3c56853545735c2f69f Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:08:28 +0200
Subject: [PATCH 224/303] New translations diaconng8.md (French)
---
docs/CROWDIN/fr/CompatiblePumps/DiaconnG8.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/CROWDIN/fr/CompatiblePumps/DiaconnG8.md b/docs/CROWDIN/fr/CompatiblePumps/DiaconnG8.md
index 355ca616b72a..4ea6075046d5 100644
--- a/docs/CROWDIN/fr/CompatiblePumps/DiaconnG8.md
+++ b/docs/CROWDIN/fr/CompatiblePumps/DiaconnG8.md
@@ -92,4 +92,4 @@ orphan: true
### Fonction Bolus Étendu
- Si vous utilisez un bolus étendu, cela désactivera la boucle fermée.
-- See [this page](#Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
+- See [this page](#extended-bolus-and-why-they-wont-work-in-closed-loop-environment) for details why extended bolus does not work in a closed loop environment.
From 36be5b937d5da3b5ff3fe39a6d5b49267841038a Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:08:33 +0200
Subject: [PATCH 225/303] New translations releasenotes.md (French)
---
docs/CROWDIN/fr/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/fr/Maintenance/ReleaseNotes.md b/docs/CROWDIN/fr/Maintenance/ReleaseNotes.md
index 59fc37f1d955..d22eccf07bac 100644
--- a/docs/CROWDIN/fr/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/fr/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Date de sortie : 23-01-2021
- Corrections NSClient
- Le conseiller Bolus fonctionne maintenant avec les versions Pumpcontrol et NSClient
+(version-2811)=
+
## Version 2.8.1.1
Date de sortie : 12-01-2021
From 63cabef438ebeef6e88443b7f2dbb033c012b377 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:08:36 +0200
Subject: [PATCH 226/303] New translations automations.md (French)
---
docs/CROWDIN/fr/DailyLifeWithAaps/Automations.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/fr/DailyLifeWithAaps/Automations.md b/docs/CROWDIN/fr/DailyLifeWithAaps/Automations.md
index 999232a8ae0b..2f08234b5457 100644
--- a/docs/CROWDIN/fr/DailyLifeWithAaps/Automations.md
+++ b/docs/CROWDIN/fr/DailyLifeWithAaps/Automations.md
@@ -271,6 +271,8 @@ Here is the screenshot detailing the **Automation** triggers:

+(automating-preference-settings-export)=
+
## Automating Preference Settings Export
### Unattended Exports: scheduled (daily)
From 483e530f9ee79980604856aa8f2a66526629a297 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:08:39 +0200
Subject: [PATCH 227/303] New translations extendedcarbs.md (French)
---
docs/CROWDIN/fr/DailyLifeWithAaps/ExtendedCarbs.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/fr/DailyLifeWithAaps/ExtendedCarbs.md b/docs/CROWDIN/fr/DailyLifeWithAaps/ExtendedCarbs.md
index c64eef7fb541..1f687eccaad5 100644
--- a/docs/CROWDIN/fr/DailyLifeWithAaps/ExtendedCarbs.md
+++ b/docs/CROWDIN/fr/DailyLifeWithAaps/ExtendedCarbs.md
@@ -35,7 +35,7 @@ Par exemple pour une pizza, cela pourrait être de donner un bolus (partiel) à
**Remarques importantes :** Vous devrez essayer et voir quelles sont les valeurs qui marchent pour vous bien sûr. Vous pouvez également ajuster soigneusement le paramètre *Max minutes de basal pour limiter SMB* pour rendre l'algorithme plus ou moins agressif. Avec des repas faibles en glucides et riches en graisses/protéines, il peut être suffisant d'utiliser uniquement des eGlucides sans bolus manuels (voir le blog ci-dessus). Lorsque des eGlucides sont générés, une note Careportal est également créée pour pouvoir documenter toutes les entrées, et faciliter les itérations et l'amélioration des entrées.
-(Extended-Carbs-extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
+(extended-bolus-and-why-they-wont-work-in-closed-loop-environment)=
## Bolus étendu et pourquoi ils ne fonctionneront pas dans une boucle fermée ?
Comme mentionné ci-dessus, les bolus étendus ou mixtes ne fonctionnent pas vraiment dans un environnement en boucle fermée. [See below](#why-extended-boluses-wont-work-in-a-closed-loop-environment) for details
@@ -53,7 +53,7 @@ C'est pourquoi à partir de la version 2.6, il y a une option pour un bolus éte

-(Extended-Carbs-why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
+(why-extended-boluses-won-t-work-in-a-closed-loop-environment)=
### Pourquoi les bolus étendus ne marchent pas avec une boucle fermée
1. La boucle détermine que maintenant 1,55 U / h doit être délivré. Que ce soit administré sous forme de bolus étendu ou de DBT n'a pas d'importance pour l'algorithme. En fait, certaines des pompes utilisent le bolus étendu. Que devrait-il arriver alors ? La plupart des pilotes de pompe arrêtent alors le bolus prolongé -> Vous n’avez même pas eu besoin de le démarrer.
From 4b5b461c3173b9194ae3612e1fcc9ef6acfc4cb7 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:09:15 +0200
Subject: [PATCH 228/303] New translations omnipoderos.md (French)
---
.../CROWDIN/fr/CompatiblePumps/OmnipodEros.md | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/CROWDIN/fr/CompatiblePumps/OmnipodEros.md b/docs/CROWDIN/fr/CompatiblePumps/OmnipodEros.md
index 925c4142775c..3be017d226f9 100644
--- a/docs/CROWDIN/fr/CompatiblePumps/OmnipodEros.md
+++ b/docs/CROWDIN/fr/CompatiblePumps/OmnipodEros.md
@@ -69,7 +69,7 @@ Sur l'écran de **Recherche du RileyLink** appuyez sur le bouton **Rechercher**
Appuyez sur le bouton **Suivant** pour continuer avec le reste de l'**Assistant de configuration**. Cela peut prendre jusqu'à une minute pour que le RileyLink sélectionné s'initialise et que le bouton **Suivant** devienne actif.
-Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#rileylink-setup).
+Detailed steps on how to setup your pod communication device are listed below in the [RileyLink Setup Section](#OmnipodEros-rileylink-setup).
**OU**
@@ -77,7 +77,7 @@ Detailed steps on how to setup your pod communication device are listed below in
Via le **menu hamburger** situé dans le coin supérieur gauche, dans la **Configuration (1)** ➜**Pompe**➜**Omnipod** en sélectionnant le **bouton radio (2) Omnipod**. En sélectionnant la **case à cocher (4)** à côté de la **roue crantée (3)** cela affichera le menu Omnipod sous la forme d'un onglet intitulé **POD** dans l'interface AAPS. C'est ce que l'on appelle dans cette documentation l'onglet **Omnipod (POD)**.
-> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#omnipod-settings) of this document.
+> **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
>
>  
@@ -101,7 +101,7 @@ Veuillez **glisser vers la gauche** jusqu'à l'onglet **Omnipod (POD)** où vous
### Configuration RileyLink
-If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#activating-a-pod) below.
+If you already successfully paired your RileyLink in the Setup Wizard or steps above, then proceed to the [Activating a Pod Section](#OmnipodEros-activating-a-pod) below.
*Remarque : Un bon indicateur visuel indiquant que le RileyLink n'est pas connecté est que les boutons Insuline et Assistant de l'onglet ACCUEIL seront manquants. Cela se produira également pendant environ les 30 premières secondes après le démarrage d'AAPS, car il se connecte activement au RileyLink.*
@@ -109,7 +109,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
2. Après avoir sélectionné le pilote Omnipod, identifiez et sélectionnez votre RileyLink dans la **Configuration (1)** ➜**Pompe**➜**Omnipod**➜**Roue crantée (2)** ➜**Configuration du RileyLink (3)** en appuyant sur **Non configuré** ou sur le texte de **l'adresse MAC (si présent)**.
- > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Une fois sélectionné, vous pouvez continuer à activer votre première session de pod. Utilisez le bouton retour de votre téléphone pour revenir à l'interface principale AAPS.
+ > Ensure your RileyLink battery is charged and it is [positioned in close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to your phone for AAPS to identify it by its MAC address. Une fois sélectionné, vous pouvez continuer à activer votre première session de pod. Utilisez le bouton retour de votre téléphone pour revenir à l'interface principale AAPS.
>
>  
@@ -131,7 +131,7 @@ If you already successfully paired your RileyLink in the Setup Wizard or steps a
Avant de pouvoir activer un pod, veuillez vous assurer que vous avez correctement configuré et connecté votre connexion RileyLink dans les paramètres d'Omnipod
-*RAPPEL : La communication avec le Pod pour l'activation de celui-ci se fait sur des périodes limitées pour des raisons de sécurité. Avant d'être appairé le signal radio du Pod est plus faible, mais après l'appairage, il fonctionnera à pleine puissance. During these procedures, make sure that your pod is* [within close proximity](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
+*RAPPEL : La communication avec le Pod pour l'activation de celui-ci se fait sur des périodes limitées pour des raisons de sécurité. Avant d'être appairé le signal radio du Pod est plus faible, mais après l'appairage, il fonctionnera à pleine puissance. During these procedures, make sure that your pod is* [within close proximity](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) but not on top of or right next to the RileyLink.\*
01. Naviguez vers l'onglet **Omnipod (POD)** et cliquez sur le bouton **POD MGMT (1)** , puis cliquez sur **Activer Pod (2)**.
@@ -143,7 +143,7 @@ Avant de pouvoir activer un pod, veuillez vous assurer que vous avez correctemen
>
> Assurez-vous que le nouveau pod et le RileyLink sont à proximité les uns des autres (~30 cm ou moins) et cliquez sur le bouton **Suivant**.
-03. Sur l'écran **Initialiser le Pod** le pod commencera à amorcer (vous entendrez un clic suivi d'une série de tics pendant que le pod s'amorce). Si le RileyLink est hors de portée du pod en cours d'activation, vous recevrez un message d'erreur **Aucune réponse du Pod**. If this occurs, [move the RileyLink closer](#optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
+03. Sur l'écran **Initialiser le Pod** le pod commencera à amorcer (vous entendrez un clic suivi d'une série de tics pendant que le pod s'amorce). Si le RileyLink est hors de portée du pod en cours d'activation, vous recevrez un message d'erreur **Aucune réponse du Pod**. If this occurs, [move the RileyLink closer](#OmnipodEros-optimal-omnipod-and-rileylink-positioning) (~30 cm away or less) to but not on top of or right next to the Pod and click the **Retry (1)** button.
>  
@@ -183,7 +183,7 @@ Avant de pouvoir activer un pod, veuillez vous assurer que vous avez correctemen
Cliquez sur le bouton Retour de votre téléphone pour retourner à l'écran de l'onglet **Omnipod (POD)** qui affichera maintenant les informations du Pod pour votre session de pod actif, y compris le débit de basal actuel, le niveau du réservoir du pod, l'insuline injectée, les erreurs du pod et les alertes.
- For more details on the information displayed go to the [Omnipod (POD) Tab](#omnipod-pod-tab) section of this document.
+ For more details on the information displayed go to the [Omnipod (POD) Tab](#OmnipodEros-omnipod-pod-tab) section of this document.
 
@@ -225,7 +225,7 @@ To deactivate a pod (either from expiration or from a pod failure):
Le processus ci-dessous vous montre comment suspendre et reprendre l'injection d'insuline par la pompe.
-*REMARQUE : si vous ne voyez pas de bouton SUSPENDRE*, son affichage n'a pas été activé dans l'onglet Omnipod (POD). Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#omnipod-settings) under **Other**.
+*REMARQUE : si vous ne voyez pas de bouton SUSPENDRE*, son affichage n'a pas été activé dans l'onglet Omnipod (POD). Enable the **Show Suspend Delivery button in Omnipod tab** setting in the [Omnipod settings](#OmnipodEros-omnipod-settings) under **Other**.
#### Suspendre l'injection d’Insuline
@@ -433,7 +433,7 @@ Vous trouverez ci-dessous une explication de la mise en page et la signification
- **Total injecté :** Affiche le nombre total d'unités d'insuline injectées depuis le réservoir. *Notez que c'est une approximation comme amorçage et le remplissage du pod n'est pas un processus exact.*
-- **Erreurs :** Affiche la dernière erreur rencontrée. Review the [Pod history](#view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
+- **Erreurs :** Affiche la dernière erreur rencontrée. Review the [Pod history](#OmnipodEros-view-pod-history), [RileyLink history](#omnipod-eros-rileylink-and-active-pod-history) and log files for past errors and more detailed information.
- **Alertes Pod actif :** Réservées pour les alertes en cours sur le pod actif. Normalement utilisé lorsque la date d'expiration du pod est au delà de 72 heures et que des alertes sonores natives sont en cours d'exécution.
@@ -447,7 +447,7 @@ Vous trouverez ci-dessous une explication de la mise en page et la signification
>
> A utiliser pour actualiser l'état du pod et rejeter les champs qui contiennent le texte (incertain).
>
- > See the [Troubleshooting section](#troubleshooting) below for additional information.
+ > See the [Troubleshooting section](#OmnipodEros-troubleshooting) below for additional information.
- **GEST. POD:**
From 0215df1acd5ccf6900c1f4361691fa263cc1854a Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:09:30 +0200
Subject: [PATCH 229/303] New translations introduction.md (French)
---
docs/CROWDIN/fr/Getting-Started/Introduction.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/fr/Getting-Started/Introduction.md b/docs/CROWDIN/fr/Getting-Started/Introduction.md
index 52db7daae8f7..6290935da4a9 100644
--- a/docs/CROWDIN/fr/Getting-Started/Introduction.md
+++ b/docs/CROWDIN/fr/Getting-Started/Introduction.md
@@ -325,6 +325,8 @@ La table ci-dessus suppose que l'utilisateur a accès à la fois à un capteur d
* Toutes les données d'**AAPS** peuvent être mises à la disposition des professionnels de santé par le biais de plates-formes de partage de données. Par exemple NightScout, qui permet la surveillance en temps réel et le stockage dans le durée des données du capteur de glycémie, de l'administration d'insuline, des entrées de glucides, des prévisions et des paramètres. Les dossiers Nightscout comprennent des rapports quotidiens et hebdomadaires qui peuvent aider les professionnels de la santé à discuter avec les patients diabétiques de type 1 pour améliorer le contrôle glycémiques et les comportements à adopter.
+(accessibility-for-users-aaps-who-are-partially-or-completely-blind)=
+
### Accessibilité pour les utilisateurs AAPS aveugles ou malvoyants
#### Utilisation quotidienne de AAPS :
From 395384df54e3972a9304946ce08e1c02f9deb648 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:09:31 +0200
Subject: [PATCH 230/303] New translations preparingforaaps.md (French)
---
docs/CROWDIN/fr/Getting-Started/PreparingForAaps.md | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/CROWDIN/fr/Getting-Started/PreparingForAaps.md b/docs/CROWDIN/fr/Getting-Started/PreparingForAaps.md
index 4f510a41e356..2fd596a7720f 100644
--- a/docs/CROWDIN/fr/Getting-Started/PreparingForAaps.md
+++ b/docs/CROWDIN/fr/Getting-Started/PreparingForAaps.md
@@ -88,7 +88,7 @@ Pour vous aider dans le processus de compilation, il y a des pages dédiées dan
- “[How to install AAPS](../SettingUpAaps/BuildingAaps.md)? (Section D) which includes [Troubleshooting](../GettingHelp/GeneralTroubleshooting.md) Subsection.
-Le temps nécessaire pour arriver à la boucle fermée dépendra de chacun, mais vous pouvez vous faire une idée [ici](#how-long-will-it-take-to-set-everything-up)
+How long it takes to get to closed looping depends on the individual, but an approximate timescale for getting to full looping with AAPS can be found ([here](#preparing-how-long-will-it-take))
#### Fichier de clés & exportation des paramètres de configuration
@@ -188,7 +188,7 @@ Même lorsque vous serez complètement opérationnel sur **AAPS**, vous aurez to
### Considérations médicales
-In addition to the medical warnings in the [safety section](#safety-first) there are also different parameters, depending on which insulin you are using in the pump.
+In addition to the medical warnings in the [safety section](#preparing-safety-first) there are also different parameters, depending on which insulin you are using in the pump.
#### Choix de l'insuline
From 4bde679e361c7d0cf9da1cd7bfe3267d34957046 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:10:27 +0200
Subject: [PATCH 231/303] New translations releasenotes.md (German)
---
docs/CROWDIN/de/Maintenance/ReleaseNotes.md | 2 ++
1 file changed, 2 insertions(+)
diff --git a/docs/CROWDIN/de/Maintenance/ReleaseNotes.md b/docs/CROWDIN/de/Maintenance/ReleaseNotes.md
index de5fc49b9838..1aba328db8f5 100644
--- a/docs/CROWDIN/de/Maintenance/ReleaseNotes.md
+++ b/docs/CROWDIN/de/Maintenance/ReleaseNotes.md
@@ -493,6 +493,8 @@ Erscheinungsdatum: 23.01.2021
- NSClient-Korrekturen
- Bolus-Berater funktioniert jetzt auch mit Pumpcontrol und NSClient
+(version-2811)=
+
## Version 2.8.1.1
Erscheinungsdatum: 12.01.2021
From 5cd5410821ad8b7d8e96efda934803adbc418639 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:21:53 +0200
Subject: [PATCH 232/303] New translations browserbuildcis.md (Romanian)
---
.../ro/SettingUpAaps/BrowserBuildCIS.md | 35 +++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 docs/CROWDIN/ro/SettingUpAaps/BrowserBuildCIS.md
diff --git a/docs/CROWDIN/ro/SettingUpAaps/BrowserBuildCIS.md b/docs/CROWDIN/ro/SettingUpAaps/BrowserBuildCIS.md
new file mode 100644
index 000000000000..ab5ed29b81ae
--- /dev/null
+++ b/docs/CROWDIN/ro/SettingUpAaps/BrowserBuildCIS.md
@@ -0,0 +1,35 @@
+- - -
+orphan: true
+- - -
+
+### Run the Workflow to Build the Signed APK
+
+1. In your GitHub copy of AndroidAPS, select Actions.
+2. Expand All Workflows.
+3. Select AAPS-CI
+
+
+
+4. Scroll down and tap Run Workflow.
+
+
+
+5. Select the branch you want to deploy (master), the [variant](#variant) (fullRelease) and tap Run Workflow.
+
+
+
+
+
+6. You will see the message Workflow run was successfully requested. Refresh your browser page and you will be able to monitor the build progress. When the action completes, the AAPS CI action will show a green tick mark. You have successfully built the updated version of Android APS.
+
+
+
+### Install the AAPS APK
+
+1. Open your Google Drive
+2. Browse into AAPS, select the new version folder and you will find both the phone and Android Wear versions.
+
+
+
+
+
From 6425a71ee5b7975602d23b10c9de6bd24d76a6d1 Mon Sep 17 00:00:00 2001
From: Milos Kozak
Date: Sun, 24 Aug 2025 05:21:54 +0200
Subject: [PATCH 233/303] New translations browserbuildvariant2.png (Romanian)
---
.../CI/BrowserBuildVariant2.png | Bin 0 -> 76967 bytes
1 file changed, 0 insertions(+), 0 deletions(-)
create mode 100644 docs/CROWDIN/ro/images/Building-the-App/CI/BrowserBuildVariant2.png
diff --git a/docs/CROWDIN/ro/images/Building-the-App/CI/BrowserBuildVariant2.png b/docs/CROWDIN/ro/images/Building-the-App/CI/BrowserBuildVariant2.png
new file mode 100644
index 0000000000000000000000000000000000000000..660e22b146625fd577104ced0d0467f7533a44c5
GIT binary patch
literal 76967
zcma%jWmp_h(H3f7OViYJSD0GmbtR@r`^cC=PkAwgm@m3tw2L3?1Ybr=X
zRgaVI18?ALq*SG#pz0D)pUmKa_sA}a`tDFrM00OH(1cUN$G`7el;bODo
z;jt9p;}Yby<}#=L@9jP8tpCsbo!$Ry2EZU3Z=Y~*v2(sn`R%pvdpA2PU>0w;6z3BC
z&*%ToF;R}UiTqy^6aU{wfVBdz{>L(JX8IrNS~&wI^#*Lm`Yjz53hD(LBrB!uV|P(QiY^gsuvwuT&5V!I34d1?%}<(<^|5Xe6-j+
zIa!X~!+e4nU!4Ei&f~t5-QaI6&NCs(L&FqPNSjGDhGPG@J;4~0V8Yn!&teT%V9!J`
zE&X|a6wVN2c%z8OeQ12x^6Fy^mp=qt`5Z_T+nx72E>f9Mn--;FcDz<992pJ6`hq}9
zgEqP~S8}3MSiR80PCP>>t1N6PeT=)FwP?nElEl=sIaj;NIQbpT>Sj*!C%5NeJn<~C
z3QD8F
z-P(0CC$amT6M*h#$nC$fX}Ws;&yd&pa~fD28+1K
zu{XbZd5`B#HM7zA+iqJf9DGk39?8AOkz$w89cl`58WkH)6m*VA5hKd#a~n)x2!1=d
zhhK{;U#iryFwai%gxyj-)d1-iS|qdxOygioeT{VSXZLAGQ~vN-d%22PY+Sgkd8f@|
zaWO)HYh`1fdm;6;io|Zy#ewTlqX!YG9%wyQ?tyGa6xmPt^O6Ri;!nsHFP}y__rz)m
z^cNCNZw~rNIxe1O0)#I`hYs&-K_tSImA=DxnsY
z?Y}UYKhrrqiF?}9dgz$LY=T>zc=}o*5jcU_T|>_*N?38(d=*72bh23`{`|S!H@Vz>
zw?M-IYLKUU?wO9fTt5nI6Vy{^qI13;T`>CbXQnXUFjw%4W>>msZlr^NR=J_s06N9s
zcRrT;i$S@FPoK=2M{FChDLT%H8L_*oo^$9VYE1vGL9^<0hGt&dn{kbl{b4qCT#PBC
zQ@$8Wyqr2PUH3*!=XWKQs4`S&9meA%>ZFiPqP_A%mqEnb8kntkI(xL&w&xSB>U)Gm
zbi4e=x5M@^)SyZ#)e1PLGuIa-XXV#Yi84rae60k-$@aze<3Pa0JD~-B4?pxe0SljM
zPc4KFu?Q*|UR^r5vAj%kNAhmOaWEVN*6IRBquv-36yBqX#x>jq!3WXUs1s&fMA
z^!JUl+wos$k#YN<^^yj~
zXN##qxUI^xtB46Ea;Z*s&{1UN-w{_^%ueUoP5l%rQI<91mQoMNEHw%E+_~8NjwCrk
z2R+}EJHxj?fkFu{aljlpMJZCJLdrGBj5z+&uQgNoglt87H|z#{4oYff?5zIVlNTal
z^u8sPtqIsipK1q87??llD(dyJyiVk&L!a=vi?n1s3ZxC&TynGK!KTfNcGLBI3<)nF
zC3A#*JG*by>Ql?V&Y}*D{?_^8%-YWuOw(9#W>RsBe$hFm`0XVkcPZ%_#MN{lU^y`-
zad(j=)VC5%BZw3x(|B?_W?!e?qQ^zd>y$8y;zcAZ`i#Z|`fMoZju4N52F*-eB-7%x
zPmg#@u{+(m84(egoc(RhNBWizF5p;8u)
zSvIOPPwJ`FHa!Q)m_D$gN6-DeV%aLMw2KVg^Ut`}JyEch?!sWbxINeI?2efQ_)Pod+BOU9{i%IoS#0QHE~&VNGqmPG}=^zDy?_jAARXv
zqc^35Sih6z{oV^C?8LnFz3+JR(uLJ^KjIww`2W$%4O$0jYK=O6?9ASSfiKf6;TFyrpAy!TEYYC>nKq9oCPgTfNT(i)
z-xj#>@>(rS5$l2!HCH^k6q8UuFbmgijFja8z1c0qQa~63O!saW1{OA4LszD%wLF4Awek1WtkWbcg29ujk3-|*g*u%GS4Y>>
z6Jjf$A5^o>d&+J>W1*9he;ZvHELMEO;VT3HSLRLQ=%1=_XP^(fXN%9AzvSLlN|JFz
z>|R35Q5z(Y`E=%&x6q8<;dj@qT;CYiwvJ^i1;3
z<3bzbWO;03cI59*D-IH!7d2B;tdxomrJxFal^nrT>i!rru8e!rX*4b&Gz<(`;I2H-Ph@Fy&cj9DO1=8M1b8yiTc^peevGtnqqSIw)(~WTBkLX&33Im2
zdYfLHh$rkc*hKYQGxAHw2!ZqDZKTcJ-Qq%{vvHaLLg!eCyG=%&EfqYfLLs7G_n%ml
z4?nmqk2st2O_tnnsV1Bp#ZP)+QU7)J{`M)S1!{laqJ4KX2j^>hWkY#_K5BNOxz7#jWdR6
zfH6Qm3YkR_65^JkV)kN=exri}=>%s*#BJzhuxi%aeg66LU!MeqK#VJPS4^;#8auQ}u
zQhJnq^u-Nkvu>F`{czFM>ph4zEG$}FuTiX+wTn%^x*YM7C}12Fsr1K`bw=r4O(#`1QnV2d*+oN%$dY7BrsN`t;p|)SK
z@OHL&*XyKR0=aO=imA(LGpmfLB9eVm=0{g9xOLlfMP>!V5UE1B#T(X-PdE(YhIE{h
zX8LuDc$KM3W)T6wn~Q70gH#7+(znLhLay16--AinW_`}#$)(kk-O89Rdfkz~DDkXu
z{#2Xf!MuAn`h4L|%nz2c4CNe!fWEP__8C%QJ-Ig;pubx$_{O1;F4-R=M1zhDG13JI
zvbdHyKkE43&xXJBzT!zWFBGWUqhyN*!No2p$wuT#%b|Y#nmf>{Rm%9`Cu;`(-oH|U
z4?jNa&Q^199X!9g3a%q@t*h%0@#AG~ieMEP_1m{A|Le%#-G!V4x1g_YSzP)RgV$a=
zc`7eppwvR4&TkvRu#E;pxp-V$`rW*Fp~FB9L!m1+KyV*NJnM={pvJ`F__UkLd3bR2
z*^6AKf~-k?qqEKe6qi_f8oNyR{DNd0xKH;(y9RXo5(xPzT~HXwxnt>mzu`NqQyF3m
z|L)ya(v|k8AF~eTkVpTm9^0_N+!Mv$)@(ivx&q=p!L*xEXbL|UHOgs^>f@wP5xvMP
zdyAPy?~W`0XVK&I#^0oWZ#FwUyLXj8)hj^pe&<*`kWj!8tp+0~i-Y0)TFFWvlO7`)
ziD~l!qs9-k-S>IsLx-o_Evu&ZuV-X6=wxcz+DKmT!nb?!vG^TC{_o#*Tlqj#T@
ztcK0GiI;C38>9=Q;cYK{6vQbcQg5T;OoxX)8;S=*=a9!)?}_JA#Ai0G#piNd-muhg
zA2l@-3D36?61wO6F5;u*iAK(LKT8AL
zYHG8bVgK?dS&vO;Ser3+teSH1NLH4xY`&NXgxqX9T~C)9hZds{^$wf%Kc4ZbQ8D|C
z*#N6*ETVtEDxkD5m!hk%nq0tnsfAP|-BSI&oc0u<9_CYsB!Ez-ise{h@HrA_rF>+0
z-!P$Hj)9(2{*0aN>^d?EK6}`LV}VZiCp14WkgV`Md>mjEnR{ud%QZ^LrFy7VHYdi(
zYgVunXAk(8G&|trd96SCMbc^u4)0p~G_AxOepVHgdo{yG}*7e{o
z7gT1Wy{fi{R6VyFCmfu5C-B_lca@3+|%lFSb82m8(&~v21XJLq|WYt{+
zXB}n>462BSxZxu4^DX!5d7Wp8!=*OyKRSs=jbRYSXQm$KQvOhmP%dG-lP=%qCKcnekPYAEs14=F6j2OwTs`zck}A*2^x-
zd)hwhF;G(%AtAH;;xTIDx_icqj$;q$rxh6trfPH10H!1rE+3Di!-5-wayzC*iG}pS
z#hemhK=(EEYy3Z~y_0lB#nv3$#FZGEK{|<<_QDV;ws*z%X#tBzcC5s-{j1Bq#ohkX4WZ|w1i87gGNv=#$PbInLnfy8Kjc`1cjvSubc^&9(u$&
z*s$-BKNI$kDNqMqWt{6NpE62oX`VuLV-U}Q$$$~A-;jjEqmEFJXg@U99Vd!7%+(f%~
z!KaIw*K!rfll!E%<{y69!Yv%^?X$#$6^7`PQc+?hfoU~pWff$7%E0_@sr0qiy4n3)
z9!5!>khyAZ{hl4<+@s^7(-`!<@gB#s9R}WGx_cLwVMtjWYV>a7A7_4ZtZUH-5!=_
zRPD!^WG3Afs8HzEAZXzJF3l}IG~~(rNL4){TiHfoQKl?Ohrz*Y2hx+LIDhOFIA*(X
zg=!b2AQlE)kA!G0E~jQX&lfzWapVdvwpcfawt-l|VJ9Tt8CT3tls3h)?Huhu+Kj}X
zd-89EO#m-CK}d7%v-ks7$VGT@HAx4$I4Eg<@mM#Rq%z<@mU=bWSiHE1qR44uV2rW2
zlPn$K`z@h(7t;(*w>dSu*h|^W?LJ0>b+m&>Pr}3Wh;2^C`?&E+*`oU?ApU0BTlwz2
zyY#c0vvU!TF+b8a{OZ)F74@mehn4W#>N%JSl;FA_r7^m!C`czFu%dir)csjR_H9mh
z2~^_Q*I&RnTSuiLzn6j^`tjJ{jMn;1It4MQTPKPs??v-UTbB#=PBLiTY&4;seXUwu
z_PB4$7+fQb9mejHf4+z_ftfg0d$_t3wt0{vBJmn8O^byD7feCd+~pd0Q<)qv#PAnZ
z4ykQz{r5=Ri3XA=-@m-{_O`tQ^@2T^&^6Dp{Zt2UcjnL#RXJ)kBe&Sky`Chy;fTmbCD#i;mFZG!l|B*vZIm7ngbILe-lb@63+RZ>I$XtoTnDw|rd7@$w$*Hip0hH?7|Mb|E?&Uz5Tq(aG>TL)@j_*d2y_yMYm*L*Z&
zV1lay?cgA9EZ||;o-G!7e!7ppoDm@au6q?47iN0jc}?J%0;~%bluNKo5zMu+1tHs_
zzl%y&p=USgk`8!cQ=v}=Uy1D=G&vZydo2s-QQoZy4c=}6ZzxzMNa*v8!TU|R_r)hMY$pv@iY~yvAZCV@ff+2-@X+Dt>NZF#EnRKWG
zI5>yhTyC2?sw)&X(02R#0XL8+6+)5BxHz;q@LyTAgeif0qus@fhI?N~4H`Lb2n1)K
zP$%|4?JR%eXV0U&57mlGPcQ|~obr3MU
zkC|N~RdD{>NEaLQ0w0q8S1+^Keq<|A9J-Y8`EEu!*XKbfv&nHJdTMj&H&jgFWW#$2
zznlGuTZz$9{gI!ffyu{=b;VohbUErLye<*uFt|mX6T&KynS|8-C
z)J^nqTI3AeaWwYXx2kV&uhnC{qPQbAd7lTmK1furHI))4Cqv7nNpw0x~zp
z1~?f-aBS1z9FO%A?FM-H;vgj|Dyj~MdI;U;{D8;gud;NOYgN!EdfF=M=@@v6*~fE|gzyUChnQvxu!ZF2PdXJs>GLpn`3kyf*9Sl@fv!m5)rl(3K=O=L2Q?{H$;QJc#<#dr#MCX;b
z^Whp`E`NULhsP3dK-UJpO7#{N3cBBr(l=zp60pA`$Cq#ando*ujMw#GjW8kc$~qGK
zu{Untg!{R|?r1sq3w$g-Z2qj>)c*Bo249ZWAcjV}jw&}#JrWX<>ETZ@w4hC=gFn^%
zVHCUX$jRm7iD!LFbl*=;PutG4;e{h&P}0)E#rB(#3&0TydcVNT*o+o_oF}+{ZqCaP
zdS>ZLe?V^cI<@L4?8jxqQVV~$Zt=K}*(Aasr4?n38%eAFlA1ccJ)%3g@6l*CJG}{^
z;^Yj0el{-fIX5qxwI4_%llzTuU1w0mC^<$vyU^-{Q<3&MJihFI_Y#%obDGnvced&M
zbhgYYpGZ0m9!YHo`Yr#*o{u>t##}Cz3p}nO{%p%F6V)MOuf$ySvB`AjisL@$gf)}T
zY4jYY6mXF1HiFPK@TSRfCq&^e63C*)C&i{u$}I!>fvP9f6V$clQRzTXjv{n@iUZ*Bt
zH{Li~m+-YXleBCf4TX&o^nF0XW6{pH{JfDZ=o*uqO)A{zwAq!X!@v+
z?oqH81{egp(>PJ7r1zT9BuFU7eRq7O+k_$ppXsP8DsEIon;B2uq8c`vB{)ZCq+F{M
zGCEr9l*NB?H&Bf}R4Tg8Ty1{^i*T3EG7s_v
zR*(IS)Y9gEY~ilmf+AIp0XGO7SAu(Z;(W*t;Pbq
z){;uw+O2~81#dw)`zviFJ_|fGih8x7P}jrG$Bhl}_P{HAb@m7Hm0jkPEzUua?k^A5
zhlQHudTmGE*w{Gxr@XtbKw5vir6`n-w~zQFIB;Jd$iPmT=z6xav1$M9
zef$rWQJc{u;V7F_J~2nqO$nt)9?jx86HoNDYVZMsBRqr->G;HT|C{i?3Z^Mj`WuLF!^YrWOv
ze&f;K){(%I9+@bRiej<+^}(0-u!R@xH@jE@GsB}!QA
z9JP{)2Bfz&Ip7#mX7f84Or3uoB;@lF1$Xg8xZ*HqHA`vvb#qfr;PQn~%f+bITOtF6
zjRL!w0VrO(C8Vt7gfZ(P=Vf6i?Hc2FXAV!Zm#}`o?b=mxFOW|=M7{x*Y#lruvsNZ|
zub;L5ZQk&XhzQj1J)Vd+U!uW!%+w_;&!H${01)S~qBNR0AUQ#lFqVo#_^#e0m5(X{SQiIQuWO?hpDm+HzZc}>idWtZP)glAwBV+t8dwbt#w(@0bLV4Zz*
z75*)%T5^IJ6Sg60x!~Sa8b&?BSP#Sa7nkw-aK2ZDt%q<9&)BlXT=r@D?e75RWhF{M
z!E~EE-%P604v?N6A(X4@xk}Cr-J%gR@vq
zkCZmxv(Lu+s>uWK7jYA?0b+sls{ta(c?2(t#|C_LdTbsi(}4W)d#l-M1j0pZ
z_oo(`=2Q3k_=DM{3C`Ej$hbV-$kXmDxmat}uT~kxfe-F1RH0VN1ULYyP&)(x2%!W$6CY3nyiPoZe7!~eT
z#G7?bZQbj0Yat_J{iX@+AR#|_n6s{=%~-w?#1`$LonudM(0I(6hd3Ug)A*DGeViA+
zBIQ>I)GDJ(bz-%S!v(AM=9_1YS;L54aD8M2DoW!P2N@#cjsw;WIJmfbc+T7z>bRVQ
zSH=keIu&@pAUD&^i^rDMR_|~LqYbJCY`F_&?3ZVjMy(tCHHaq=q9I3n=LqnACTRh=
zJ?2e?Lnsf6PxAE1L~@YM)FK-v>7uDSr%IxDdEBAPoc5i25;Tlb!S>~Z1xNYPnN||n
zd$BahwZsvDO%SJ@hMhY+S*edm-xAecQdItKmu|xKsu6_~iY%fMF0vbn--#7m7$SUd
z&9PH2ZmCRWX+A7BO3ds
z1Q1u?08Ece2$lzM01Js62H@+!*^*~i0RMYCJ1hzcfPrrxiozlNe+~85N%c%}Qd`vh15FI~ST|@Cy3k5Nk3ZMLW8%Hp2NSrB^wG`lpCX`e{WT3F2S}gByY05J>4cw!8
z6+pfW^%HXim3M*Q!U6!D0c**^(MtrFenb=;G8MtnJFj+`Kk@XaLiDlVM#(jTH|#A&
zzi2C8q6s)Mugs_B
zHIYT9!CG>_T_0q>V-Wn#i&B)ZrgpCjFE*P#PC;fW|V(}8#^Ew
zDc{14A!Cjy3A{^Sw<@Ppq<8sk`LL4~sGimSFgu%n%sKfNa40~gM(n7l8>i%}mYXYKKj
zkwHr>zOY$i2r*$RrujZ~=0L{sc?a8gdr890Z{K
z#ORZe<)Eu{WVE$u0dQ05T|@2>^rByL87GgkI-Wf?JnImh*e$2@pY{+@%_bCB#H-CZ
zjN^{!-9d`QpFHk!-r0h_Nqxn%(qZ9DAL?l*#2$HJA8z~e=i6tz4yUsEV}sVqOGWB0
zZcB{sMfdLfohWpqFflMJcSeO&UR+SNhg0NAG|igd!uiA1zG~h|XRSe%v6wn2X=&a~
z8>7`VcQr?;#4XsXo3)0Z!j)?*I|t*c`e*FW$gqM`sX=V|AZLjsi4u@O*n
z>@W7-aAK1KLt^)bHZw0Vy4LpqSwDFM3;D!eQ%*r*h35Mp(aYB5>l0uvQy2p~b9Xi6
zDY*W4L;O?q15%Ze%p_T~kYvb!WC(uTD!EUy=JCIEimz@;=YjYBQu_BVw0MItz)-C;voSeX%H=VBl2P_p@
zb?uTb0ybm&i~}!mSU9W(F1&tf=lJ}-M?^#fz^5V%s^n9x&=6qln~327ybBQCW=_9C
zMil-m^eP=?$&k$#!03QF@#~kQ0(neQR-RURcsT6TzQ?%3J~A4b$8M=k1u`;*hkzyw
zEbP(*P(69PIkp*0$N^m7HgNCS4+fTOjt$_Vrlui_7xW|bj~SvQ;<<`RTS02UQSwFS
zk54c?ool%rcED~gnp5q!G#!_#Ol8+PE?vSgc0NhlvPs|r?}X?hDUZ##`BvGK$I%@wEF#9n(>*GyNnO%z
z?&+x3dx_tF%JVFm41h+AGHvFd*Fd_!$Lrnl(mb;>2e8Z9FX$^jF#zSo_Vk3ci!{=Kuz|HUHhKW|2imcXqo!4oNOuXnuu~i^VUnxlNn0^Q`>X{H}=WwXT6iA;I-*(o89pRchkI2s
z#(rPIlrpRNsVC&6X0lxuGnK=nXWk?@-1uA0}`qH^9q%;8SZS4s@3QA(7fQ-ZIWHei7wa#(j)Rxa4
zAQX%re$e`LjvwY|munNo%d;DI^kuiMeoao6d49NF=(1oC^Sd!$@0A0BWk_^1Ou*GS
z1MB0ncNnb4lVGqo;M`K`>R3i52cw^H7~ZB$z-~w>s6Ihp5&-$eL@`w>1)CfA9Y;C%
z8Q{s@gSNcW?Yi$#@L3gstHk^~N&{N!X-kUF9}dB_=KV^5^q>Yv97H@`tP)S06!A)L
z8BWCe#QdR|2MGajGEtW|i>KU{L+az%
zLa{m(V`3VVEee1mt-6_ECX7K{Do9h$e3R>0LkilvA)3j{lbo6MgwzSj>K17>tRG>h
z%o$$(&8hcW7T(y{EY~j*4o5`K*Q+Zem2eF+^1peY_iXT6_5(DXa;h@;v`UI@M
zPo<21VzwI>vFee84^oqXYStVZGAin&YHvHZvnTx=Xa7oDq5GE3r*`V_8YnS^zrZ3)
z7ukT@JWnB`84ddjMTjLacs=wYl`5*4ygMTt;zhe7901<+Jt$|;@34hVYz8au?g~%U
zn3&w0EGs80?9{H5X?IMQ3IzIl@3yMFzxcN%MJf>#78j?YmMi}I0iA?MB8ZfX!eIi3
z>>s!9G+ebwx4fG@LQEkRK6dY&tA$VNVQhzZ83k}Z>(!TMJ*&3{LX)6#A*F)C+360-|kl^6P2vtKG&kVpm8*E|4P`^*E1S@`G$tw8mo)q&y@yEaX+0F
zleX8@Z5kG$V`2*5=dA#3=q`YYnUs{IsH6nov(&ym*<9bBIKa{dnDL|DJ)tgnO13mDopTS0BU`LgR#JNMU|D8(=0F)s#n#S=5{aBD#bv>
zf0EVHLjus$UKl*!+BA!n{TRSn%$oFigsRvX2BU$Bpo5zZZX^&}p(?p?kvJrQfbjL}
z*P#&OQ^F#F3>8MnD2!u9^?WEG=WUgobY^h5)A#iBY^BGQ(d|tYi4YMHdH5V5uaI9r
z19DFsxmcKae@v29BTyCu@^WP*E0kJ}u$-hM)LV##4qvfcI|RD}aV#l08Kj~lPX~g7
zN7U#F@U>hBhFx*w*ZQtP1e7B{0PbDxtpc{vag&tjts_IFPQ|J_d|3OKQO$jFy=L@;
zie!aXbdG8&@*Mny+p?N0qTCk?z9hTx@1}~lsO`a0&)9r_1A+uNIDE2rErbnHWd8hN
z#sdHm5xv5CyVlK#$S;UiDU)#rApk<*@&gwYkkL>q7jJU9in<*{CmvbYzpBX@**l;x@s1I
zs^n)up&UWsZ~v{lV(%HT;OGUg%MzUe1o154_^xLJEPQ
zRug#ug$lawpmjcW^a8!L;Zy0GE|su01i!zo*w+;TkQIp&C^%{0Mp}<$P6H7S1{S7v
z#7iA_)S8DstB7mu5iO?hOHPhzoq0c@um@6!Qd+Nh-E?=bgs@jY*pXw=CHZCUtvANR
zsxs;Ajn9|X!!YM$C%xlVE!#L9oY`1ybL(Bm)8Atr=_@H*BqS@>#F{dbX{sGD{H|Dt
zJ-s@~8o7HKZB#?{LhdW!PYIoB0~rH9V%03(Lc@i6D386#R3$uSm-`DmU^i{}qp;}K
zQ1S32r;cT5)XTa;kq1}8ZV#t!_x8s+-dj|hGQlArxLy5qH3ps-Q06>8SQE(La$pB^
z(aCyW_pTQ==7IvMlPloYTcuw0P?u-(ki+L>K@Gs@T~B_(iJnJ&y>iMO7q_w(d#)0D
z9NBB*kSa@3^9sgcKT=B+}of9HE~RM`y~P0UP~H@
z8mY(Mm_H0ViDO_)zQZS$H8dp63wjXR-_Njho@vp}ZeR@ycNd#`WnxZ2sX#lNt17jh
zWeyO!w#YrcqHVID^AH@hYb>_e=Je`~T8e9hAf9&r{=_%3zuL`#iqF2W1<@k(u(y$s
zr($G8LS{7j&I|B(kE6d|_f6ES=B_x1#O!Hn0Ls}@2BTM%VCUo=ru=6$=#Xv2|C9`f
z@nS+k^4(fDaJK?oFv0DcL7Ua6ezok;rh&CZo~VS4!U=uZ*0beoe>n7$BbU1^f#+4O
zTPU10ep$PYVV!Gc#H`Iv%^>!MH5JjET~~
zcz|qG>D2j+3D;0i)6=IKwclWoldC;d!QBd(1oOZGJ%t;%0VXQ+H~>GlxtqKte0XV(
zBj$>;(~{Up%L_JNsFBbD${nj(P>jZvjL#1@){w&cO5<~q3GtcFe_MRy6GcOEa~aF&E#m{AA8dE)@K5%f8G52zADXPEL>Bm@eB
z3GW5{8~JaS?Awj#g@sW%)dn#oo`wn}61l-I($*8X;bYeBsPVJ**VttGsX)auebm}s
zJ2=A6^N`zbRPRO9D=9oGfz#tJ;?ZJv-r6syBQFJm_lCFmA3%m}0U4i@zXO~)R&7_T
z)I*VKDy6Z@0d5A=1f@q`VVA%gLG$op!h&Jk@A~Wh
z=2(E3*)nz<5uUiiQWykgDjmg$)2hdSyu8W@OGOj+`$6xFeVI6RldVu$+qvCn6@<&Q*pX_yQ=FmpS8Rj
zm&cjWusi+^n{*V|o2@<&f29nrK}Dd5eeW{uBc3T5ifo~94iqFkZ0A!$LY91QfvP!B
z$Wf`$ML4^}2G=|v%#xd3^ts9^D17~v-5VPILUu;|R!(#zas+zM6UZ;)5lol*AllVB
zSzWLQpJTS5dz<@DYs}SgBhSt_frw@?5VzS$B||7=&kJf&w6G
z18ko@IiuccFG({tKi{Bx
ztI!b``{cT94<~)gj#H~xAL00ZzLiXt!Luu}LLr=;|4S0^UMT>2WV
z;ElaHoNtUe5k#wMrE;-5qnUhJ84cE2-#v)@ZjKU+T(7o@iri0k)c}#|H96%G?$tkF
z#f|l3
zmk#76Ji47ff4J=aN0lB2C>gC$4ia{@
z?YRiAfHpWyEiFLDI3c37ZXimAL;xYrU~gwtcDqi~5JIi-`fv^JjcHOk>EEQeB=+v=
z^0Th3NRfzq1#-?m4Gln;I?}gcW#RZ-HxTE*i)vf
z6OoX-v?rwz{4u@u18<;J6`^2hm>>py%+Pj8m5=DDcSakIt7P-}OMO7i#
z{hg!FKu@lK6lTBktIZtFd?q40=>(O3Mx{{$yP>r=f&H$%Q#F@m$}nHKF=bNryE
z;YiEITPWa5`gT~BYGN?q?~=3YhH@#pZJ02--4`_&*mjXj3t1*~5lcSItarx~2tKb?
zn!J5H@A%Yh;}uw1?XvoK-+YdHr72ewxqTcQQiJsx?7Hn;1NU5=wFJ#9pSGTYkOSeh
z+7&*}&;Q^sS;n{bN4U|x%7hD1QNU`t$+=Vn-#tVwHqB+b*SA;tx9vhl2ACJ>cu_27
z+1ciF<=JuhXSmgfj?3l+9g3{%WF^RAbqlJ|;gJ#WATkl}2B$|gC_syb>2j!#BrhC@o(+d(3(yVP|LkH-O^Lb7M26PiFtRmiFt|V9y0j_%X;GO({Ap5
zU)4usmGq}~%l=)xh%|#P8+}an^VN`}jG4}XlZJ+dx~<~Y(tV^Cfh~Ue0E-vm`PS-l
zt9i2~gUjd?ho^r8?aL?RENNCzcdZv=V6yZ0*94sFE9FB@dHnYWKUyX`LP!!tYUAJ;PGR-aK{NVZa!I|e0sE|XZ3DN^zo&(p|4pC$bS%gnz)_k4?x3eB^u@bMvpJv`HkgVf3eiJK79!XzQ%Z|
zJviw5eMYMb^lKm2f|nThaw+Z9lt#LWHFY8No1`Etex43?bIG;f&SV7YE&z4k`TFBS
zbbLIGD0NIKTc$?$N)Dg!58dF1w`x7mrKHhl`;Pe=heE@5)xE`1f+7WsQjOmTU8P%8
zyu9CbbB|?#7LjuG0#Ser6gw^QqwU?Iyq)7#5@Wo-xdDDhY7p{Wm3XGI{1stDMpe8f
z1FV0+W~eXEV@4%q%XjbZx{4grke1=ZYw`0R5(?*5Ybr-D9>?7&B?z0o0Unfugo%uO
zIsp6YxN$6!7F1kpQ}Cf;((cd6N{cdynEzg`-~O!3#PcA_NpAX*Q85vZ&*kkot5_R;
zxQ;@|KwV&ggbF{8{*I%twlkzrt%#A}!?3_-$+dx1hpfd1PXt9EI)0qH{kL`E3r?c_
z`XxKp25lK9c;dpl6;&VUgvXHHJB3!`hu)P0dG))ez>BZtBJ>hDzlprh{j$>_MoE$-
zUNMiazqf+k!;|g$+{KBZW;DMNu+tjL=~#N$vn9EUNLL(jx~F_*mAdttICCC(+2ecB
zRlz|r1gb5kh*Gzm9H1mcl`%@-p9X}9hn-~cOPp{n5V8QIwh
zAyoDz^+9&_CVTI_qa=jvy^~~syviIKOZO`*~e}CsXf1h)mzq&5HdB4VUJjVTg
zd(u@$yvd_i8Y&y%j+K+FgKahTtTK9DRJ{4eS5a_Kyh;a$c-79^p+NO)&ngbl=Vc>+j
zPldn36ngfxmvQWj(j#yzHp1+8A1~hT+d%*apydzyH1Ia)RnGlGukfa_C6>;evIGT9
zgxpT>tM3R>=dSTrZkIkZ*tLuyS#P7a%~fy--@n*%+drAOE=HT4ZK(c2-%<9Bw5ScA
zlIX>ochs84^69J2W+s^#)!b8vNHjdrD0+j6@z>J58P@wR*HUGMu&%4zRoR}>_Daqn
zqIqJa7Z#41pqPF*h9G;@ln!m-)0_X@0|wl~o_G{}l+sX5Y>IrOdB;oE#;l#!Yn}bN
zny2l8HPKdB)H;+6eATfj680}p+OWkx&79pNOu7gOA5Eq1@GKNX(LdFRpzF-I!WMHo
z8s60z*zNks?LXJ_OCQt9_V&xiPlRGJP;T!_<&AAQ+KR>M{MpthnO2p!Ql%-nM8kXb
zMCxUv2|?6QBzraKw{f1;Ep+~JO?D4Hbfe_M=7a(~^C8MoASsG=DPr;pT+;2>Gh*R#$^(a!~_gvG{
zgV@W#Pu`*EcC`(jE(pi`TanFlj9R;t&1`z9*H1b-IijNCg4-;`)rchP5$7KEcRkwA
zR(9hBrRb`Q-{h&7S6DW`3Sa^=?mJfBjvKOTw245o6jA?^OYPr^q*8nzG?pDhINc*M
z1=Wm*Kzomed@H>0&Ruj*+dX_@D9>ak`J6;}SDuIr{OAP7y0
z!NW#s^Fjo3ho&BFGJ=1Gtt7lP+__IwH7X=@bOB=kGz7zf-CjlR`SkIhR*xLxRig4a
zp!e?XzIQS)VDHQ=TKlNYd
z){5&w8(NIhN&Q>`T9V>vKvWQL!PhC3WBHI-z<@GH;KOr~|!`NXG*SEAhg
zRD+*|pVQxbKz@bar{V;boo`jQ;fnlG?BhK&>rapMVc)h^7C@qV}8>r
ze7T*ndsRGFgIiag;X$midW8udiKmto6Wtx{Hsc7ojkClNs?*&EpU5Tl-h4@lYY!e;
zEg83d9n~5rqh907d7O6mNm#o*EzEe9#RIF>%;*)kOnD~b@r_a`t6%mBF{gFv=^6La`=A*S_%iVFufBK`L$bCIl5x>aT
zZ^)C(teeHRO=BaLN6?1yDY&UEerQ!O$I;`wero*0`I(yC>Fsxnf-~IghqDGr^$Ee~O@A|o
zZ`+i@?i9D_4j;O+K;c>@2zrRb=X-KCcc%Z*)6-Y{F^F<2lA70G>nol6oImsBK$BVi
zK!fBsv%sLzdbTAqn^B|51D)4!0Sdp6Cl}1thh;O$m)mx`TJzMYUsh1CQwlgzzH1K5
z8r*cTo~ca6YxnD+nLI)Hk`~z&q@0U5Dxj$*BMj2ZHQ6lksTVcH(stW9`qMA2a(-J&1CfM{gJ2t1E1K>Z
zT+DqfC5H&RR^Rguc1S8a^h_0$Egq_&8W^^$i04ewDt!F#7l_-B3C!PR{6gWfJff1L
zb(kk`>hCY|BQ~&wnMwV+59}GZj(xU)3W3?~Pb$q$^@nBfblIYl()#9&7@5_-5rt%x
zc-_#>(xasCxx^)mX{!{fq*;yHIUZk%7rUpbg{o!ebjb9xANHyzK3|}E?7jEYvmq^q
z<)0zAQyede>W--vf?W&G4F8xv{_GwfOgAI`((t;!$%red{s8UNrOh*(T2#C#P50FM
zfJr1-D5}fo;};_?cAp&uSQVYM*!)pZ*HT|@gIErl-h}C2{&Bk#$R9Z2yn5UX4
zHgzXw5>AJ$%(>iI)$!jawmB~FXiU1wMy#i5Lk~a8x=rmXn~nReG3{dp!y8PTRV$)<
zyb~vQy%i_}gJt@P?Ct8zdrD`XA1Ky5f)}{d2FTx?sSNEYU@hLfNcvepelJmT{Ib%K
ziq~l2O&(=FZ_c-za`$!V1v`eU5rGeSQS?Nb2GifRTc@S}%Rkav?jr4<@vsHE-ZaC8
zNH9{W6gAcE8c*DRqBqphT`7_Y-cmCCbBJ{(vYSED
z)>-Md@cP(2Hk=m-qY|#C6=2TCrRkX}f`&ooj)Ra`XlZP@uM{=EpNlh^!@rZLlV!AQ2E@W
zKP(K~sXYbOSQ6s*-#&M5YZzE}nDJ_OM*CX~W=Juge)G#$?k5$#&RYW?50<4lEju@V
zTL1gBp~}MUdpfC7tc6)v?(eYIzsRa_Aeb$hA`RnWeJqn3W#os-!el?AVv#j-`V0vcGL7cA
z{H-dq&X3oc*G^{VqJ!y5CbqU_+{UPAD7VHq{(|@g1r;@XcYW(jX3fP@giJK03jN4n
z<14;S6IsW6wnq?}4pev!J*l=QxmNc|qcvDfQE;jFrLxZ}m=%9wsO6uyZS&N41+GNo
zS9>IlQ{B|k9q^!mp3{%gOn6?=%>8`Yy}MdHe!jAA7cVwLzmB@4G}_E!ID-fEuCN@%
zKicQNzT}=X-0UevDJhx5_=}<+{Gmy=V9VecK`KKakQ!Hmh<|RqC0WnwNRZ9w7d~RT
zxJ;T(`zxa(V-#_neB0gWEe$=Uuf`!uF&#ESTL4yYzo
zi8|EMBZMcSUineGC9hOj&&us*1?K6LvTE}4@2D4wr6$Re34VsfD4bHXZGUJL)aG$vhJ>w7-*n^A`dngH}~uci;B)n9b|0
z4(u6|qi(#LinH5)(ryQ_C$jUgbJFL2z4ed<%M0&P>b3p-QQOus
zi^-?(XhBps-Y`3;?VQPkMN9kp!$&mb0&{~juOGLS+i`L{7SDIMz$DZ$S-FJh%1$_*
zH>dXc$&g&Rv$Q!bYFO?iI03?(0ZVS*j(^HSe{0A{chg*51pD;so4*y-@wp!0Un`W3O`N$ey8=mo;UAHscVIqU%!BOrAP#9734Gml@~10Vv0n^TQ||J
zg~?zUqYD4f=hfTSH(y?Cidc^?*Qj$~Nv_%fQBAiE^RMhX8!sIMK2Kx9uHk)nRwa97
zio3~cX9fX_F-4g9WkS0Tv+@r#hEUS^y+Ohh0WZ{7@6s$)pBR*Cc}LIi``QXtJzpXA
z0=cREqN3zd(sYB;X`ABqQu&crGpjrgNp{%R
z!!_yOa0u#3QJnZg7aNxQSAHp
z)DpcLs@0y;4#jQ(y|$83^jcgtzlwa~Zyw;e|>ZS=C$-=+quxB!%hJdZw1P%o@Ta
zp3P1FCVHm!pgc(PT7GZXO@ZcvzIws3ge>KvhE`g<&BI2I9II6j-I!{qk_PXy|xPpE`mYH0~PbK7Y>
z?0?MRG!Z15E)YqY?h(-1x+K)#96ipyvk?(67)iFq`6
zzUMnhZ7y1N=D=}L)^Fm`cOM*{3oTx*lO>vSfxI^W6*(8+T|0Y4-oT=QkBp88Dezvr
zG~`e(o_(=MbaZ$q3o1FRdn6LqSLeqN-Qr5=S?GonvWgOxW!3
zrm7yUkUj=p#U`KZMqkr)Z7)zIT2zltMdvf`J8P^=txqT_C+w+9gTV{H-Sxityf9r5uge@Vd)M#y?q%>qcT^}hZ2d-8UGli@DO19GR
zt$M-cd8_As`y5>4+@Oa>(dbcgbo@-M?w>-LUH4n1%GKph%#+_G4m6yW3o0U4o;(m=
z?c9~@z_saQPjYu_rEm8>(8^3Pa_u^v-T9l;6fwd}2pW}wsR|&8tcsq>Hq^W+$-myQQ=A(0DtXlrI
zPvBO}w>+=G+-F-=e)21QY|EAWUw&-I`^)B>e4R#5pxb3bQa~rf8Y94+?~(Jn=79`s
zNnsSj%k8}yMKhl=eN)N*Bf&V4+Yp!55>PMFW8`E>?)-EM!s5?g-byNPi`oJrX8#X&
zff`F&2+_BfHB+(69OY%mkv*u0Km0>)WK)O~1{ghK$7{$w`TX{=VDcY`P;W|PLrVJ;
ztV7a+j{?8zRYVCs<>U+lXxNV96MbMJW5kg-y{Mih({%R%j!u|Nmbo+dIA*Xf#!{Pi2b}F9R7PE<
z(}mG=^G6K#ER3;`Wry5nI^wyJ7`Qn0TZlQy0p0FK={}!_^>?OAML%Glc#>0(f)nO}
zkXIYnY;B|+inJI7_0JO#BpgmNFZH~?(GmZNb;V;iZLx7|3hSNLPsvt{w8BEzGG6eD
zK~=)6E7ii+EokLGJl+5KV0ww&%-&^-b%!PJIcwbmheESug<+N8$)n?;SL(Lq{Gro3
zDXyzrHLEtVC|I5DTQ02K<`n`scMTjN1;v%ut^TNY`?o*%1p=j`Kn3{v31%#Prt8r^
zaXj6Jo!~B!j%8XQaq_$8-xO*_{dC^dPr`vnNODOR*tZYePv1~BV4z23@9c$Kpo4!$
z2n68Af=Ov^f>U>T#y6X&W~g@>eSe%Vf`WFenh%t0Hx4F_O_0fpy?nWFbHPgrBoo~I
zxG9%FyGTTV(UhMIE_O!t%YA)pOmGA3kTmA}oxa~m;aepoqp*4&MnV7h@tMRlzGMVd
zu3AGovY#lCeR9~0j{NI0-WS42Rko7b=VAPgtZum?{&T)92E9%T*DZ?bQ&M5`#q)qj
zd00*7t<~y_rJTlfb4$=|H&do6?WgC@+xL=xeicu4b>18dx9nfpQ`!H&a!PNZWr>*VC)HnOhf
zhdx>oAD>@0WV}Kx;AUH3Pcbw$jdZ%hHzWfZL+Sflv5B9y$aarLsU!C@*X`eF4IU?D
z{diJQ5P-S;wL0z$U&qgT4|FD2I_)S8%!rNKbf^#Y#09KbnAIchgVm-S6-IJ+6cNvMJ;HY^~b|guC$(R
zUlFa0N?03Pq<#zC;H~kxh`sMwUvqL0-G67HM}rU`1$jj&pa4PoeWkEL^W#
ztZzI&{fMNpJUmT49X)I^Bd?>Vt_){Wu8r}U2>G3{y3MO^c09GaHnYueg6jrO%`5;(
z3|{Z&t{qN=a@kFXpM3P4WB7cXAh68>qoX4_HElJRF+FD)_z>o>qSt3J$)>X>t3|lZ
zb>*gm@;g0Ob+Y4hKQ|Bs37SAUlW*N==Jz-t681b57J4ixOf_l*OSCiBdnuGwv+G
z=dv1)8=Y}S2ldM2HWH2yXET8STE)P8u>4Pp3%>l(f;(@gKZeyKb}r1h$T>JU$)4}I
zJeEoHR+k6L1lEV@H*RM3nK({t80Xj2m~Fdk(Aht$B}*zgw9qX%p!>K
z2$QmyzK?7O&U{_jg;w@>i34ZQjZgr+7%0gjBk`eLqg*9#^F+M}$eIfW%Ph!QU^QB_
z-){AO4ZNG6db-?ORDjAMXuCKeOg$KCZiBcorbt%+cqp1B=InM22$8l>QlrC9214iN
zR>w4atx-8mgIONR(lJbZ{Y|VU16Fp5^&0H$pU>a%6l#~5^^5rGowLYM@P0!e`U%Jh
zn&U((2df?E!0jqln8b~-H(uRoSy5(v_Jn|dpvHcmK#rXEt502}(8M=lq_Jo((&)QV
z4F|Z$vmF*cTF;h76SIsC?C;|uofn`UDsdPhf#f`q8$nU)vi&kMV9>2zxcJ4MUDTJ9
zj}mu03)|T{bfUiK$kcm!tJSPz2;!lK2bV@!$=5n{;!qOzz3M9b@Za)!{5kV%PvR~`
z4pT^$PPMbR#f>$d$^75tM#X>|e5gFCYKe}kuJ7q6C)uz;YKfvc>f%g^WZ5`GV+$YEcXU3mY
z(-}NOY{~aWe@=sGo`C1N>H4@X3mZq>^N4Crei1MwaevF?ycoW|pf%a4rGt`G6qmR)}up1j3NzVdjSpM=YZ&+Ut5EnnHi&3pxp3dR?}Lt$Wp^W1kC=H5a-01sTM$xxZf^+yIY@AD
z7@#$*{v%@g1?Gx<=^L>_s^_2DL~jDr@|SzY5npp5n;?`iHU^F2vTf~9MRzFWL{+Hz
zMboW5woeRQrDwg{K=#{#X-1
z0%VA>N~?6b>-U%iT1{=dGQXQXY2`eo=X;Rf8^S8cqvK#x=GZjHJa!gbm95C?HjWT-?KWm+CfbaJn5a%ZdEgKPu)3R`aOij|$^R9Za?&`vF
zH`oTkYF#XcKz`0;S>aVcm3#J-g@r;~5uy>0p0|L6q{e-n12#X&$)8z;F3g>B|5cW+#NQw=
zaN38_m)i7ME8BD-SD*8=VbJ@0#M-vCH4@qw9r``SzoV8#jHIt4={vMKukE==hQE)5
zv;XjF(I@@o_vdJn*Zih+NN9i9skODewk2QP>jSSo#eZ+!-Ur_xxaYF6vtP^08_eZj
zjh7kRo2;^aySZ{ypjq>oA#{b1n0T2XDLkL`MhKJhVG^OAb!-$0|L9k-xq;
z5o@he6&2Ysi~ho4$C>fI5Yy64`w9(0{j_+S`VB#p5)%E$S1O@LDCOG?s8av??NNJy9Uv4D^lPu1eYQS#Q5*WR<<@Ec;F
zmzeeI8&7=p_?)oEj3BuTfJVc5$K?LXubF!O4AR@4ZaLoLf2}8KLlvXHahM*gLiZqg
zD`hfSW!ei1`a`0=E>ZJYl0&;UfnAJJIWX-8jEMSvmm2KRlhU>$4`DKjF$n3EZky;D69DGmoDT
z`Oo<;*#0BN8?m)A5=m+AP2g)x71+1iwLO9&e~EXm#JA5>(iKnSIn&VD9jZ>1cMQKM>&isfgN>1*t`CvBe0Rn!MqCm;sdl<1mXkg!ciI&L-_Y#~=U0VlMpcs_
zXoJl6eY&5vl=USWG;Eh;;+F!=1e6{M5rvLyxK(kBqiQ;AWj*#d6maPK{)Q+%Z@Ltb
zWMn{gr>-DlXdMHm`l9J9&F6xQZ|xpf)nqDus4}Y+JcuvWnTJ3GS`@t?a`Gtf5d__-
zUBiV)`HHusiZT62zA9ZuLQ7g|9U0fDYU9<43>X$(Ab7UT|CXR`sy$<5V)_KIub~_(
zJZN!=P;
z@RYAoq!S#)5aI+dGmgKU8Wor7T0hO(+d|{bhYN@SU}HW0GcHR!#C`eM{V9bMKEFGu
zT0o_qE8+P;NzyWvI+~J7pjwnGXq#_*t+#_W^0Q*Q?l?LoN;*-Aq4Q54Ei-fA*QMb}
z8s;Yh^uM8gH8_s0d9FOVxa7s2eh=e;cOarY_QJ
z>KfT(hi2U!^4{t6=EDrowLrgzPQ7S0L%%tjK?{IluhFT`ZRey0z0S@1&=%}#`?bM
z|3O=Je<*4e<~*ewIiDvpXb^WvS#!juwT6onV}Bmv@YqbY!2%*p^h`SFUoR#m=5fOv
zd(Q`UvkmEhF)(_*W-(KZ8q2csG}wYGQKQL1P~EQeO{TSlG!aYlx)Z7U^?C;o4pCC-
z+!JjCPat!%cvA&mJaSy!EV_7_SB^u)8K~Av!G5_d);Nd)n1h2eUMKMNKPYzgi-fw5
z@$lC?E-RG?ycw#`^ip~Y%u)mnRRpki;@sQ#XLuF2ed%$CMiW7^k~UOhxGmwUUlCa>
zLM>x%j)AgSWxd!D*tCBZGYF6cTl%j`72eD^eXFbTUTgAVqcYkDDM$Yef!5ikLU8dR(_O&e-?-c3x@>`AHmB9-pbvY@XXwLXurgj_U+
zppP;6=ji+Jlcze3e@3M}607rr$dsLFEPH$=3GSh0$fJ
z=>Ui0ONM_o6B6zk7+uVHpOX*nP74}?Lw8?6G6JJD&fgh+ope3XKw*TsM$^Q
zs(I?Hh9&Sy*>zhOR9sy?EDQN*q~@8bfCR{GK~`@{qd(1l+=WzQ&%|tHByKiS_5|
zPbyZTs90=L7
z%{-efZ~4@^HD+hKRgt=XRl3syCC!T#a}I-e6D$eIGS3zo+4DoI&l1sg9MGfuT}o({
zz;~cK<6XgPcW(<>O@E%)^PRryYIn@Q?r;7kqW)hoI@ruix+|wadAofX2j%*$QrI2IFhp)yGO*eOS)BTc|jb<1*%24((JsJ?v%0s|kyH68AAz#&(
zdJ1h6ko3pc)E(cpKRjg)Pvh&Y#+z9w^l$L6dPAedRRpxUm$@U6DM{^kp}si?PAZQI
z1zt}VpYRjC-TseklV^xA=GpFPb_g#Jq{VP-jiNLWf_k&wmott%I+xvY!3-(hF%zs@
z9hsS)+E--(jl5t`vP1Z8JE>;e^!2?)9&&L-CLN|Es7ZpN|87ItQj7|SfZhW(ihzV5
zpn&gNHxe29z8wO5J{Fs3W;d+9RIr94K8JZ8{8y(Yd*gho_-OO@J3ZY*t_|TLow}~y
zbRH)l1SX(I3o1yG*lBBjsDu0QqXm(>kS0n`bQTlhow{I
zr@A!~uJX9B@ZQRB?lSZia6n@SAvQr&>LTOTrXr1?=`^<|Z(Ln*qeYYZQfT~;8+0op
zy&>?W1bfpYvN7M!OlJ1Gr1QzmdZywQ^0={*J!E>0lFeLfvLGKxk69rdIAYmmib!i$
zho;HlU17lAsuXFYJzwRk!Zr%W2gu3d1+Y-n-m|jEUQMvy+t?N>hOMOZ>o9<@GELnRMeS8*KW)+?WE>FO1&mnqaHHz2gd7fwFVi@tfv0<(JZs(t~;S}
zOy4w|+_?g^RA5B=y~QwfFU|}%^(S#G@5c>MGu}GWcQG^Tr7DGWIG3z-Vw5>KzIN(!
zaK#5vQD(rMhURNr5F7m`DGqpsaQgIZK5Z_GUyw;~?#0HhPcDiV^S#?-4`=YnrbG1o
zS52t1*s9-u?O%P0*6z25s~C9)>@>~8z?-5r|Bx|@N*>mtXw!F@4%(SthNWeW)20N`
zQF;1;ZuhK6VY7O)qjsx%)VkH2Bl=51542IIam5J07*Z3P04|dU3NzI%jN}m(N;xtl
zx#sf$psGmtChsJOY-~K>JaaN!pxkucJQ5hTjGg?v6O43zJqB@6lo6N1S|=thwXpxc
z@oMuoxg=Et(VCz`f-St2zQad43OpY|B~iG~9qT3m@8S54&%!k8?rCWY6pIeI?Uwx+Vh3N&-R?k7oIM&m16Te5zCXCz~z#
zJT*vfG4c=Cs#BJ&c*sd2A8Ql9n;i${N~!G2qffrrgN&-Y1OM!n2tR0NksIC#Xg
z#WvpKrwJhhRM2wMC^e-MJfT`xN<^%=XvvylL*?$jY=<5>E^;}YM%UCv;o54sMd(#N
zdMe_ty2(>+bK647K~T5_8ta?jUXRQ$ejXjg6;9lUzu~*a
zbulT(@St6`CF&frnA@jRrN-Ud;uyqvVANiJ=hEYn2-ymbl_s`j`4vUKzgnscfgeI+
zlEn7ejuE2*vZ;)D4|9Hsp<~M*BJWZI1TJV~+CqtGg*k(o@6ZjNdZ(XE3IWk<@2%sc
z$J!^4HI&b3m;A7~c<&FIzkF5Sp?4DkZDZ4;kD{mcJr};KnTv;6q97WTh)y&V$5w8&
zxZ58=!R`R-fKtJ0+UAy*!C`gc<9`{Zg^v=dwIQrm{Nc`ygX#&9J(JqkFOxzyiwm>J
zM);|q$Et;X9sVmNN33}RgBX_RP4Cr+ZuMelQ!#7Ter?HQ6;53ccWUTXRvN0tCzK2}
z6dx<|!4o{8oC}R;uihQ9F13fK1NL!PVh`(*CPfXdR%~RiRs^5Ku=JKx-36^G`z-z3
zPg7Q%+7uASzJV+Pq=V>%YRSc4o`fu#G{q*!s;QB{uRC|-?^{MsW*N^B9is)Sh
zS1wOE^La0S$CSRx)8j7gIBk-Gx*TJFiV+O$z2iCc@5<##c2RXNO-*_9`_9uI-`h}X
zlE3#
zBP&f5etjX+^gq^}+q?URf^TO6a#%GhL!#P3J;EesF`)|$;Wz~BA>TVOX4m{;8M@UV
zgr}(=SjSBBtuM4Y)NO&5h*7`T^;l!_=l>a+nb@FCxoE8%N3ieF(x=
zd`JnW;dL25etb>hk9t>&$L95}?X&yyItL@*mSb6yUv}xJ!5ww4$<6S>IuO{?mtmyRmk?NIIw=VxLZMtg!xgUeaN`E
zXU(H+o8v3V7
z|1-v@i;-R+<OAT
zo2OD^v=-IG?wtF!4mX|MSsXQ0?Y&;E3x=m>TqI>SX6zfd`sP^@XQH6Bb3*5F=CzPl
z1HC+n2MnPE8Ka&{$oA*`DJprrYH3$BlDnz@Xve4no}Ljp2Yt98hHu8e!g(k}{{~K=
zpnhyiw^p^D+0B!iArror(CR$D4DWx3jImE&tXL7>HCJ!v$D~)y`wv-6aG85=7nldq
zUS37un)Oc|X~GlO;SR~4sfli>>O0`qNyUbCJXoP^oZK6ZgV?7KZ#)G1hrVwx;Y2U0C@(i7mY*?c~l>tQ0e5~)y!!aQP
zN>yLe+$Kmfq|Q)gRow0&?-CureK$!!c6@Mb^=Nimnz5HjnMp^YUe-@B4fC$wBzrOZ&p_gi!f)T!
z`nk};e3&3R{qs_CJhoDHwce+i7khYvR`f|R*mLpz;_Kt|M4@u?EfvhI-^QVbScROE
z)GvG|;>Emwq;~wcv;UhAzi|-aNSa4ddoJpdx6gD^0&{{me4?lR&u5=IvSLXVB@eFC
z*UsK{%6PG--;ojP-e`;A`nI0|4xjJ|g1Ak4?8Rmg~j26x9O#j$kw|z(6N~BsR;$i
z>?Xxg@msDWKCgKKq@Z2#glhGv&dTsOHZU=N>(1-rA6A%E9vr$|xqI4*KDNCK(GM>$
zZK>J5bTsBpw@HWscBfXa+REhy}9*VH*%Hw
zQwo47+L#Cye|(RyF8!dGXEPDS2#KJQ=B5{r+W-Z;Uq$5wFrqF
zh7!|x+TFg=?vsz<8BX!>7SlTpY1>n=5h7=wlX;E2qgT2MKcIc{IlHG@d-PRqvcscn
z2!TV!6X0`!cly|54V^AeEBk42!&$gp%$&ZMBj3NNAkU&9%NqMLEThMMeQQ$6iTrl7
zvwc^=Cmpf|6IHVYT-UCH$b)5exasGXA~zPWwPrWG4X5Y50mw|C*+?xux5~r3?K*p+?K$4i|^kv}-TzydYb>0?yr3&cS;)$ywRUR1O)9CbkpjRF8R
za9SKl3L(5nug7YqH&com6Mtjt)*{-}^~)W)X>=Mq!{m|yi@1d*Abj)a0*~@QdN<;B
z5H6g9kxC}uO%HgMc{tZ)Yoa_Jz8*7jTY;h@7&dV5k^xJ77uPp*kx?GVKvcd7f}uxNY9-d|hMx6P&@`uPS3qJcf~Hpi
zd*=+U7H7l#NIyaa&1jQ5;&H++uTNeR0E(X=D#~O1EZ0J#nCDJ&%O@~a>28_|jn6BB
zF-pc$;^RdMcmdQ3C!0sh{fx)|9MR9N=(-qiC23T72!c$YKguLOxG8om`2*M|;)=&R
zdEsO8e~G7@J!f*ie%l`@pc!k}y{{GaF%JxAmOj@e8c~!K8c1^m2*3^&7ff_&9eY`N
zH;%M58ho+Azmfn_wCl0bQL2;GedWuNHQvV53qp#UG5_%>!7Wp+q|=>Th7BF&W?bkyd)!0^CvO-`9_s=Z
zWbm7d3_U%7C*yP9dN{5h5WDV7yaL9S`Sg!FWxA%zKQ22Cw|N8sSA)d+g8{kd>m|y)EYN
z57Hi@+`Ng5{tgv3f3aeteLI#jhkd)&)@j4daN&C1jaSFiLJRV);05W?u8zS>_wN0t
zd-16*_FbFhawr)hf#XQ~scwUWwf8Nj)n^7%G0$GhIVGHdBpKxShUY0~-rSq$$O7}A
zaxU4${Hk6Uj<{k1EOtmOdH$&FeG0$O{#?I~pLR`77j@Oa7D>jg~%=jVYQsd=z
zqPhKW;uw}ZVRq9k4LDc^j_>#|Xufn1%YyPDkpJH#Pjc_hb5hXsm@d|;T5B~WN!%lM
zZ>s@UCP;Y*F@piNpEW_J+OY6GAYkoZ1$H5|je`H4eaCTXzzuUzd-f_%{t0%-BUrbG
zid;CMrqEN(tdGp?%F3x4S?1?6;Zjk-QPpM$-bZX$kruim+MgS=)_I@p^8q#%IdM8e
zqB@3ct0oh#77bw=PWR&r38tG}&X4F&%F@7J>C;C_?G=eky{mw3+d`^LdFIP*f)o2E
zemT0>l#YeN$E*JJ;(3Ll6v2DFb@{q~z4b+lFJCsB^AIX#pe%lD>TQkO<*@l<4w~h@
z6YRLC#Y1$skXFOegDGXIgo_bLXP;~4qUlfbr(NYZJCmtUI|VPr$pg+UHmGv86#0Z3
zJO{P_7S4aD$Vzv#L_-Iua{HTXEn+C9F1glE*Q`E7=FQsg&-dmNP7=8+F^~mUIJ~UH
zrGpwpP*+d
zB+#9dS%N(@E}aPpa4y^9Paw@-!7om0}5N9pHSPi^4-3-l%_t8UIutW*ibH7}+e2
zf}~4Q=V`?PtJU+wCpJR#Dy7_v>L1h^Uco+KK3LBz9zt~7)hh!FeQ1(90iG*LxZ#=zGTpFXK$=
z8)TiWCj-D81C|oKCGR?C?liiN#kIk0k$_vb0htVU9*=9o=eEz0m$$A{m(~fEwY9T>
ztJ90KThI-6KhD$pY5DJybw^9!2>yJUTeJrvBn#JSYBVn_zc}L;il>|3yUpO>)>MA<
zcR)#$w#GS`9>TSI_Kb`C9{X}P$98`I+Cb%3Sx}7Rt7XZBJ}z=)OX68N%k`@Br3+OR{utLwUb8V=
ztc=|trr>yxj%S2{#=BTKduC^x>-hNW*5gzGTNYY__-*6m)h}kfZmhkyc{OB6kVAS}
z+UpWGlttd&x8uP_rw{633>~$a&CDrHq@$M;uXGL?ZB4tq+Z%Wz;9`yUq62q(VBMua
zvo3sVi?aXmmZ<%g+vs@s_+(-it~RJ^1DRA>VXZ$#taM4O4FClMJSR$F*AzO*2qY|b
z<>rzFj%bBLz*2$K^tZ8LLVcXWBw>FV^gcE%%Pi`r?t6?=7r$B#J+~}Kt{c}B*f#2?
zbd1NtKYSS6Th+t+-E>>rpl$
zSI`VuTAbJ4n`cbtblfs-OgN+(=dW1{q5tD{^51K6vxgawbwlw+In!FRN&ux_=wGV*
zwwC|mxcufm%GV4Kn0;B!q89a^E4H7!Bh1E|`gKd?r`Az(=@?rK=BK%2Jvwvzp?8Ou
zvPw=v7Wy@0PU*<^^-$k7rEe~Falpd4=(T$oeWV?CG=em@giX6K1W-pwTo(T=O58(r
zU&^%oPyPEZ0FjM1W0K
ztQJjAo&0K$$-u{=ms^=Zp3)Ev0lJ;CWkxZR&jv_c5X4s%BE3oInfd>fiI3V|8
z=#CpaIg4Kdv^1rN_i*7&bF~Mrt>44aInhs9OiN4OyHa4(m$DPD9qnEHn5?s87~!@p
zr=3()7;d1N96)4Vti!zXbgqjqqu%^oSKRR8^=tb`bfx?etdN(vu58m2LT76&hkp4q
znY6zxi_kH@3a-gL`BeX`+FU5;MW1eUE1WL(YqmdrRNwof*ltrFx?Q8}yQXJ6$#uUx
zaZ~w3Wul&}m1SiNUZ0&X=cU&@v8bNY?@CYi@xu?J&r`?{EQ#hxGK~{NBOrj^IxijEubTZEa{BU1gt(i}7Mv
zI+XY;2`Vf{z5>e&hx!yh)b}EgIznh^91WCrRp>irD?jZtnoRkJ8dG16{7}_swB)|h
z^NXgC>PnMC+2in_l_GyZ`%J-jnDElhoJ-4Eje@W-b)BR)jP6#QX7=5w*YdP%!tcL#
zK0i1>V-*#6Q-Yt44nvrP5ls8=S=?z5#?~=viXi!*ra~OPIdErIRACYdE0f
z{-FxW!%rNM_2)e5n2N7P|WX|^n5mlw?geQ&wl0!NphS~Ob$pS`M^Lu>~1!^MYcnBFxtV>ZV+ii5NQ!m
z8l<~X5RjJc7LgW^F6k}-5$W#kJa?Y=e?Q%CcMSdD0AZhV_FikQIiKhEkW^G*&jSJ>
zwm?(n?NgK(<~A2z+qs1WDJxxalL0)`d^W9;*iR&Kt4Ecwaeuij?#YDWP!&%2s_}tQW-IW)3
znh^AQ8AZJ|Mi%i>|5>*yeoW_lc28$tA2m0Bd_axJ(*bg<;rtHj!_Dg_Cyr|o<^Q
zMQS6nH0xev-6R&B^O&b;Vrvfw?KI!w5{94380F05+tBlYR5
zq_Uv`9ktS-TYQT9gZ=4Qr8B#I2kEes-dbO2yS;ri-R%ohx~NC&>^Q~sr}w(Lat|r?
zi45ppEFf3+t&nOf32^~|>cy4(5<1|?X{35%>TVZF5)z#bNMHQ?`ud4O$QMW5Dw