From 2709b01108c31aae80a0e2808cdb3d84db7d396b Mon Sep 17 00:00:00 2001 From: Alfred Broda Date: Mon, 19 Apr 2021 18:54:01 +0200 Subject: [PATCH] Fix dependencies after PlatformIO 10 upgrade --- .../Stm32F0_lib/Src/stm32f0xx_ll_dma.c | 412 ------ .../Stm32F0_lib/Src/stm32f0xx_ll_exti.c | 238 ---- .../Stm32F0_lib/Src/stm32f0xx_ll_gpio.c | 279 ---- .../Stm32F0_lib/Src/stm32f0xx_ll_pwr.c | 101 -- .../Stm32F0_lib/Src/stm32f0xx_ll_rcc.c | 599 --------- .../Stm32F0_lib/Src/stm32f0xx_ll_spi.c | 545 -------- .../Stm32F0_lib/Src/stm32f0xx_ll_tim.c | 1175 ----------------- .../Stm32F0_lib/Src/stm32f0xx_ll_usart.c | 529 -------- .../Stm32F0_lib/Src/stm32f0xx_ll_utils.c | 620 --------- .../src/Libraries/cmsis/core_cmFunc.h | 87 ++ .../src/Libraries/cmsis/core_cmInstr.h | 87 ++ .../buildroot/boards/STM32F030C8.json | 3 +- firmware/S42BV1.0/platformio.ini | 14 +- 13 files changed, 183 insertions(+), 4506 deletions(-) delete mode 100644 firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_dma.c delete mode 100644 firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_exti.c delete mode 100644 firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_gpio.c delete mode 100644 firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_pwr.c delete mode 100644 firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_rcc.c delete mode 100644 firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_spi.c delete mode 100644 firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_tim.c delete mode 100644 firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_usart.c delete mode 100644 firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_utils.c create mode 100644 firmware/S42BV1.0/Close_loop/src/Libraries/cmsis/core_cmFunc.h create mode 100644 firmware/S42BV1.0/Close_loop/src/Libraries/cmsis/core_cmInstr.h diff --git a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_dma.c b/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_dma.c deleted file mode 100644 index ac2a89c..0000000 --- a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_dma.c +++ /dev/null @@ -1,412 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_dma.c - * @author MCD Application Team - * @brief DMA LL module driver. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_ll_dma.h" -#include "stm32f0xx_ll_bus.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -#if defined (DMA1) || defined (DMA2) - -/** @defgroup DMA_LL DMA - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup DMA_LL_Private_Macros - * @{ - */ -#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \ - ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \ - ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY)) - -#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \ - ((__VALUE__) == LL_DMA_MODE_CIRCULAR)) - -#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \ - ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT)) - -#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \ - ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT)) - -#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \ - ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \ - ((__VALUE__) == LL_DMA_PDATAALIGN_WORD)) - -#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \ - ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \ - ((__VALUE__) == LL_DMA_MDATAALIGN_WORD)) - -#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) - -#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT)) -#define IS_LL_DMA_PERIPHREQUEST(__VALUE__) (((__VALUE__) == LL_DMA_REQUEST_0) || \ - ((__VALUE__) == LL_DMA_REQUEST_1) || \ - ((__VALUE__) == LL_DMA_REQUEST_2) || \ - ((__VALUE__) == LL_DMA_REQUEST_3) || \ - ((__VALUE__) == LL_DMA_REQUEST_4) || \ - ((__VALUE__) == LL_DMA_REQUEST_5) || \ - ((__VALUE__) == LL_DMA_REQUEST_6) || \ - ((__VALUE__) == LL_DMA_REQUEST_7) || \ - ((__VALUE__) == LL_DMA_REQUEST_8) || \ - ((__VALUE__) == LL_DMA_REQUEST_9) || \ - ((__VALUE__) == LL_DMA_REQUEST_10) || \ - ((__VALUE__) == LL_DMA_REQUEST_11) || \ - ((__VALUE__) == LL_DMA_REQUEST_12) || \ - ((__VALUE__) == LL_DMA_REQUEST_13) || \ - ((__VALUE__) == LL_DMA_REQUEST_14) || \ - ((__VALUE__) == LL_DMA_REQUEST_15)) -#endif - -#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \ - ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \ - ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \ - ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH)) - -#if defined (DMA2) -#if defined (DMA2_Channel6) && defined (DMA2_Channel7) -#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ - (((CHANNEL) == LL_DMA_CHANNEL_1) || \ - ((CHANNEL) == LL_DMA_CHANNEL_2) || \ - ((CHANNEL) == LL_DMA_CHANNEL_3) || \ - ((CHANNEL) == LL_DMA_CHANNEL_4) || \ - ((CHANNEL) == LL_DMA_CHANNEL_5) || \ - ((CHANNEL) == LL_DMA_CHANNEL_6) || \ - ((CHANNEL) == LL_DMA_CHANNEL_7))) || \ - (((INSTANCE) == DMA2) && \ - (((CHANNEL) == LL_DMA_CHANNEL_1) || \ - ((CHANNEL) == LL_DMA_CHANNEL_2) || \ - ((CHANNEL) == LL_DMA_CHANNEL_3) || \ - ((CHANNEL) == LL_DMA_CHANNEL_4) || \ - ((CHANNEL) == LL_DMA_CHANNEL_5) || \ - ((CHANNEL) == LL_DMA_CHANNEL_6) || \ - ((CHANNEL) == LL_DMA_CHANNEL_7)))) -#else -#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ - (((CHANNEL) == LL_DMA_CHANNEL_1) || \ - ((CHANNEL) == LL_DMA_CHANNEL_2) || \ - ((CHANNEL) == LL_DMA_CHANNEL_3) || \ - ((CHANNEL) == LL_DMA_CHANNEL_4) || \ - ((CHANNEL) == LL_DMA_CHANNEL_5) || \ - ((CHANNEL) == LL_DMA_CHANNEL_6) || \ - ((CHANNEL) == LL_DMA_CHANNEL_7))) || \ - (((INSTANCE) == DMA2) && \ - (((CHANNEL) == LL_DMA_CHANNEL_1) || \ - ((CHANNEL) == LL_DMA_CHANNEL_2) || \ - ((CHANNEL) == LL_DMA_CHANNEL_3) || \ - ((CHANNEL) == LL_DMA_CHANNEL_4) || \ - ((CHANNEL) == LL_DMA_CHANNEL_5)))) -#endif -#else -#if defined(DMA1_Channel6) && defined(DMA1_Channel7) -#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ - (((CHANNEL) == LL_DMA_CHANNEL_1)|| \ - ((CHANNEL) == LL_DMA_CHANNEL_2) || \ - ((CHANNEL) == LL_DMA_CHANNEL_3) || \ - ((CHANNEL) == LL_DMA_CHANNEL_4) || \ - ((CHANNEL) == LL_DMA_CHANNEL_5) || \ - ((CHANNEL) == LL_DMA_CHANNEL_6) || \ - ((CHANNEL) == LL_DMA_CHANNEL_7)))) -#elif defined (DMA1_Channel6) -#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ - (((CHANNEL) == LL_DMA_CHANNEL_1)|| \ - ((CHANNEL) == LL_DMA_CHANNEL_2) || \ - ((CHANNEL) == LL_DMA_CHANNEL_3) || \ - ((CHANNEL) == LL_DMA_CHANNEL_4) || \ - ((CHANNEL) == LL_DMA_CHANNEL_5) || \ - ((CHANNEL) == LL_DMA_CHANNEL_6)))) -#else -#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ - (((CHANNEL) == LL_DMA_CHANNEL_1)|| \ - ((CHANNEL) == LL_DMA_CHANNEL_2) || \ - ((CHANNEL) == LL_DMA_CHANNEL_3) || \ - ((CHANNEL) == LL_DMA_CHANNEL_4) || \ - ((CHANNEL) == LL_DMA_CHANNEL_5)))) -#endif /* DMA1_Channel6 && DMA1_Channel7 */ -#endif -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DMA_LL_Exported_Functions - * @{ - */ - -/** @addtogroup DMA_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize the DMA registers to their default reset values. - * @param DMAx DMAx Instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_DMA_CHANNEL_1 - * @arg @ref LL_DMA_CHANNEL_2 - * @arg @ref LL_DMA_CHANNEL_3 - * @arg @ref LL_DMA_CHANNEL_4 - * @arg @ref LL_DMA_CHANNEL_5 - * @arg @ref LL_DMA_CHANNEL_6 (*) - * @arg @ref LL_DMA_CHANNEL_7 (*) - * - * (*) value not defined in all devices - * @retval An ErrorStatus enumeration value: - * - SUCCESS: DMA registers are de-initialized - * - ERROR: DMA registers are not de-initialized - */ -uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel) -{ - DMA_Channel_TypeDef *tmp = (DMA_Channel_TypeDef *)DMA1_Channel1; - ErrorStatus status = SUCCESS; - - /* Check the DMA Instance DMAx and Channel parameters*/ - assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); - - tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel)); - - /* Disable the selected DMAx_Channely */ - CLEAR_BIT(tmp->CCR, DMA_CCR_EN); - - /* Reset DMAx_Channely control register */ - LL_DMA_WriteReg(tmp, CCR, 0U); - - /* Reset DMAx_Channely remaining bytes register */ - LL_DMA_WriteReg(tmp, CNDTR, 0U); - - /* Reset DMAx_Channely peripheral address register */ - LL_DMA_WriteReg(tmp, CPAR, 0U); - - /* Reset DMAx_Channely memory address register */ - LL_DMA_WriteReg(tmp, CMAR, 0U); - -#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT)) - /* Reset Request register field for DMAx Channel */ - LL_DMA_SetPeriphRequest(DMAx, Channel, LL_DMA_REQUEST_0); -#endif - - if (Channel == LL_DMA_CHANNEL_1) - { - /* Reset interrupt pending bits for DMAx Channel1 */ - LL_DMA_ClearFlag_GI1(DMAx); - } - else if (Channel == LL_DMA_CHANNEL_2) - { - /* Reset interrupt pending bits for DMAx Channel2 */ - LL_DMA_ClearFlag_GI2(DMAx); - } - else if (Channel == LL_DMA_CHANNEL_3) - { - /* Reset interrupt pending bits for DMAx Channel3 */ - LL_DMA_ClearFlag_GI3(DMAx); - } - else if (Channel == LL_DMA_CHANNEL_4) - { - /* Reset interrupt pending bits for DMAx Channel4 */ - LL_DMA_ClearFlag_GI4(DMAx); - } - else if (Channel == LL_DMA_CHANNEL_5) - { - /* Reset interrupt pending bits for DMAx Channel5 */ - LL_DMA_ClearFlag_GI5(DMAx); - } - -#if defined(DMA1_Channel6) - else if (Channel == LL_DMA_CHANNEL_6) - { - /* Reset interrupt pending bits for DMAx Channel6 */ - LL_DMA_ClearFlag_GI6(DMAx); - } -#endif -#if defined(DMA1_Channel7) - else if (Channel == LL_DMA_CHANNEL_7) - { - /* Reset interrupt pending bits for DMAx Channel7 */ - LL_DMA_ClearFlag_GI7(DMAx); - } -#endif - else - { - status = ERROR; - } - - return status; -} - -/** - * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct. - * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros : - * @arg @ref __LL_DMA_GET_INSTANCE - * @arg @ref __LL_DMA_GET_CHANNEL - * @param DMAx DMAx Instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_DMA_CHANNEL_1 - * @arg @ref LL_DMA_CHANNEL_2 - * @arg @ref LL_DMA_CHANNEL_3 - * @arg @ref LL_DMA_CHANNEL_4 - * @arg @ref LL_DMA_CHANNEL_5 - * @arg @ref LL_DMA_CHANNEL_6 (*) - * @arg @ref LL_DMA_CHANNEL_7 (*) - * - * (*) value not defined in all devices - * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: DMA registers are initialized - * - ERROR: Not applicable - */ -uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct) -{ - /* Check the DMA Instance DMAx and Channel parameters*/ - assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); - - /* Check the DMA parameters from DMA_InitStruct */ - assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction)); - assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode)); - assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode)); - assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode)); - assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize)); - assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize)); - assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData)); -#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT)) - assert_param(IS_LL_DMA_PERIPHREQUEST(DMA_InitStruct->PeriphRequest)); -#endif - assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority)); - - /*---------------------------- DMAx CCR Configuration ------------------------ - * Configure DMAx_Channely: data transfer direction, data transfer mode, - * peripheral and memory increment mode, - * data size alignment and priority level with parameters : - * - Direction: DMA_CCR_DIR and DMA_CCR_MEM2MEM bits - * - Mode: DMA_CCR_CIRC bit - * - PeriphOrM2MSrcIncMode: DMA_CCR_PINC bit - * - MemoryOrM2MDstIncMode: DMA_CCR_MINC bit - * - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits - * - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits - * - Priority: DMA_CCR_PL[1:0] bits - */ - LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \ - DMA_InitStruct->Mode | \ - DMA_InitStruct->PeriphOrM2MSrcIncMode | \ - DMA_InitStruct->MemoryOrM2MDstIncMode | \ - DMA_InitStruct->PeriphOrM2MSrcDataSize | \ - DMA_InitStruct->MemoryOrM2MDstDataSize | \ - DMA_InitStruct->Priority); - - /*-------------------------- DMAx CMAR Configuration ------------------------- - * Configure the memory or destination base address with parameter : - * - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits - */ - LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress); - - /*-------------------------- DMAx CPAR Configuration ------------------------- - * Configure the peripheral or source base address with parameter : - * - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits - */ - LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress); - - /*--------------------------- DMAx CNDTR Configuration ----------------------- - * Configure the peripheral base address with parameter : - * - NbData: DMA_CNDTR_NDT[15:0] bits - */ - LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData); - -#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT)) - /*--------------------------- DMAx CSELR Configuration ----------------------- - * Configure the DMA request for DMA instance on Channel x with parameter : - * - PeriphRequest: DMA_CSELR[31:0] bits - */ - LL_DMA_SetPeriphRequest(DMAx, Channel, DMA_InitStruct->PeriphRequest); -#endif - - return SUCCESS; -} - -/** - * @brief Set each @ref LL_DMA_InitTypeDef field to default value. - * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure. - * @retval None - */ -void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct) -{ - /* Set DMA_InitStruct fields to default values */ - DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U; - DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U; - DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY; - DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL; - DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT; - DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT; - DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE; - DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE; - DMA_InitStruct->NbData = 0x00000000U; -#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT)) - DMA_InitStruct->PeriphRequest = LL_DMA_REQUEST_0; -#endif - DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* DMA1 || DMA2 */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_exti.c b/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_exti.c deleted file mode 100644 index d9e4253..0000000 --- a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_exti.c +++ /dev/null @@ -1,238 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_exti.c - * @author MCD Application Team - * @brief EXTI LL module driver. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_ll_exti.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -#if defined (EXTI) - -/** @defgroup EXTI_LL EXTI - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup EXTI_LL_Private_Macros - * @{ - */ - -#define IS_LL_EXTI_LINE_0_31(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U) - -#define IS_LL_EXTI_MODE(__VALUE__) (((__VALUE__) == LL_EXTI_MODE_IT) \ - || ((__VALUE__) == LL_EXTI_MODE_EVENT) \ - || ((__VALUE__) == LL_EXTI_MODE_IT_EVENT)) - - -#define IS_LL_EXTI_TRIGGER(__VALUE__) (((__VALUE__) == LL_EXTI_TRIGGER_NONE) \ - || ((__VALUE__) == LL_EXTI_TRIGGER_RISING) \ - || ((__VALUE__) == LL_EXTI_TRIGGER_FALLING) \ - || ((__VALUE__) == LL_EXTI_TRIGGER_RISING_FALLING)) - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup EXTI_LL_Exported_Functions - * @{ - */ - -/** @addtogroup EXTI_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize the EXTI registers to their default reset values. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: EXTI registers are de-initialized - * - ERROR: not applicable - */ -uint32_t LL_EXTI_DeInit(void) -{ - /* Interrupt mask register set to default reset values */ -#if defined(STM32F030x6) || defined(STM32F031x6) ||defined(STM32F038xx) - LL_EXTI_WriteReg(IMR, 0x0FF40000U); -#elif defined(STM32F070x6) || defined(STM32F042x6) || defined(STM32F048xx) - LL_EXTI_WriteReg(IMR, 0x7FF40000U); -#elif defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx) - LL_EXTI_WriteReg(IMR, 0x0F940000U); -#else - LL_EXTI_WriteReg(IMR, 0x7F840000U); -#endif - /* Event mask register set to default reset values */ - LL_EXTI_WriteReg(EMR, 0x00000000U); - /* Rising Trigger selection register set to default reset values */ - LL_EXTI_WriteReg(RTSR, 0x00000000U); - /* Falling Trigger selection register set to default reset values */ - LL_EXTI_WriteReg(FTSR, 0x00000000U); - /* Software interrupt event register set to default reset values */ - LL_EXTI_WriteReg(SWIER, 0x00000000U); - /* Pending register clear */ - LL_EXTI_WriteReg(PR, 0x007BFFFFU); - - return SUCCESS; -} - -/** - * @brief Initialize the EXTI registers according to the specified parameters in EXTI_InitStruct. - * @param EXTI_InitStruct pointer to a @ref LL_EXTI_InitTypeDef structure. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: EXTI registers are initialized - * - ERROR: not applicable - */ -uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct) -{ - ErrorStatus status = SUCCESS; - /* Check the parameters */ - assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31)); - assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand)); - assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode)); - - /* ENABLE LineCommand */ - if (EXTI_InitStruct->LineCommand != DISABLE) - { - assert_param(IS_LL_EXTI_TRIGGER(EXTI_InitStruct->Trigger)); - - /* Configure EXTI Lines in range from 0 to 31 */ - if (EXTI_InitStruct->Line_0_31 != LL_EXTI_LINE_NONE) - { - switch (EXTI_InitStruct->Mode) - { - case LL_EXTI_MODE_IT: - /* First Disable Event on provided Lines */ - LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31); - /* Then Enable IT on provided Lines */ - LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31); - break; - case LL_EXTI_MODE_EVENT: - /* First Disable IT on provided Lines */ - LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31); - /* Then Enable Event on provided Lines */ - LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31); - break; - case LL_EXTI_MODE_IT_EVENT: - /* Directly Enable IT & Event on provided Lines */ - LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31); - LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31); - break; - default: - status = ERROR; - break; - } - if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE) - { - switch (EXTI_InitStruct->Trigger) - { - case LL_EXTI_TRIGGER_RISING: - /* First Disable Falling Trigger on provided Lines */ - LL_EXTI_DisableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); - /* Then Enable Rising Trigger on provided Lines */ - LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); - break; - case LL_EXTI_TRIGGER_FALLING: - /* First Disable Rising Trigger on provided Lines */ - LL_EXTI_DisableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); - /* Then Enable Falling Trigger on provided Lines */ - LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); - break; - case LL_EXTI_TRIGGER_RISING_FALLING: - LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); - LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); - break; - default: - status = ERROR; - break; - } - } - } - } - /* DISABLE LineCommand */ - else - { - /* De-configure EXTI Lines in range from 0 to 31 */ - LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31); - LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31); - } - return status; -} - -/** - * @brief Set each @ref LL_EXTI_InitTypeDef field to default value. - * @param EXTI_InitStruct Pointer to a @ref LL_EXTI_InitTypeDef structure. - * @retval None - */ -void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct) -{ - EXTI_InitStruct->Line_0_31 = LL_EXTI_LINE_NONE; - EXTI_InitStruct->LineCommand = DISABLE; - EXTI_InitStruct->Mode = LL_EXTI_MODE_IT; - EXTI_InitStruct->Trigger = LL_EXTI_TRIGGER_FALLING; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (EXTI) */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_gpio.c b/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_gpio.c deleted file mode 100644 index 3fae50c..0000000 --- a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_gpio.c +++ /dev/null @@ -1,279 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_gpio.c - * @author MCD Application Team - * @brief GPIO LL module driver. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_ll_gpio.h" -#include "stm32f0xx_ll_bus.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) - -/** @addtogroup GPIO_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup GPIO_LL_Private_Macros - * @{ - */ -#define IS_LL_GPIO_PIN(__VALUE__) (((0x00000000U) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL))) - -#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_INPUT) ||\ - ((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\ - ((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\ - ((__VALUE__) == LL_GPIO_MODE_ANALOG)) - -#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\ - ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN)) - -#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\ - ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\ - ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH)) - -#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_NO) ||\ - ((__VALUE__) == LL_GPIO_PULL_UP) ||\ - ((__VALUE__) == LL_GPIO_PULL_DOWN)) - -#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\ - ((__VALUE__) == LL_GPIO_AF_1 ) ||\ - ((__VALUE__) == LL_GPIO_AF_2 ) ||\ - ((__VALUE__) == LL_GPIO_AF_3 ) ||\ - ((__VALUE__) == LL_GPIO_AF_4 ) ||\ - ((__VALUE__) == LL_GPIO_AF_5 ) ||\ - ((__VALUE__) == LL_GPIO_AF_6 ) ||\ - ((__VALUE__) == LL_GPIO_AF_7 )) -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup GPIO_LL_Exported_Functions - * @{ - */ - -/** @addtogroup GPIO_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize GPIO registers (Registers restored to their default values). - * @param GPIOx GPIO Port - * @retval An ErrorStatus enumeration value: - * - SUCCESS: GPIO registers are de-initialized - * - ERROR: Wrong GPIO Port - */ -ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx) -{ - ErrorStatus status = SUCCESS; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - - /* Force and Release reset on clock of GPIOx Port */ - if (GPIOx == GPIOA) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOA); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOA); - } - else if (GPIOx == GPIOB) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOB); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOB); - } - else if (GPIOx == GPIOC) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOC); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOC); - } -#if defined(GPIOD) - else if (GPIOx == GPIOD) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOD); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOD); - } -#endif /* GPIOD */ -#if defined(GPIOE) - else if (GPIOx == GPIOE) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOE); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOE); - } -#endif /* GPIOE */ -#if defined(GPIOF) - else if (GPIOx == GPIOF) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOF); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOF); - } -#endif /* GPIOF */ - else - { - status = ERROR; - } - - return (status); -} - -/** - * @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct. - * @param GPIOx GPIO Port - * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure - * that contains the configuration information for the specified GPIO peripheral. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content - * - ERROR: Not applicable - */ -ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct) -{ - uint32_t pinpos = 0x00000000U; - uint32_t currentpin = 0x00000000U; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin)); - assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode)); - assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull)); - - /* ------------------------- Configure the port pins ---------------- */ - /* Initialize pinpos on first pin set */ - /* pinpos = 0; useless as already done in default initialization */ - - /* Configure the port pins */ - while (((GPIO_InitStruct->Pin) >> pinpos) != 0x00000000U) - { - /* Get current io position */ - currentpin = (GPIO_InitStruct->Pin) & (0x00000001U << pinpos); - - if (currentpin) - { - /* Pin Mode configuration */ - LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode); - - if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) - { - /* Check Speed mode parameters */ - assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed)); - - /* Speed mode configuration */ - LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed); - } - - /* Pull-up Pull down resistor configuration*/ - LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull); - - if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE) - { - /* Check Alternate parameter */ - assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate)); - - /* Speed mode configuration */ - if (currentpin < LL_GPIO_PIN_8) - { - LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate); - } - else - { - LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate); - } - } - } - pinpos++; - } - - if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) - { - /* Check Output mode parameters */ - assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType)); - - /* Output mode configuration*/ - LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType); - - } - return (SUCCESS); -} - -/** - * @brief Set each @ref LL_GPIO_InitTypeDef field to default value. - * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure - * whose fields will be set to default values. - * @retval None - */ - -void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct) -{ - /* Reset GPIO init structure parameters values */ - GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL; - GPIO_InitStruct->Mode = LL_GPIO_MODE_ANALOG; - GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL; - GPIO_InitStruct->Pull = LL_GPIO_PULL_NO; - GPIO_InitStruct->Alternate = LL_GPIO_AF_0; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_pwr.c b/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_pwr.c deleted file mode 100644 index b4bf665..0000000 --- a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_pwr.c +++ /dev/null @@ -1,101 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_pwr.c - * @author MCD Application Team - * @brief PWR LL module driver. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_ll_pwr.h" -#include "stm32f0xx_ll_bus.h" - -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -#if defined(PWR) - -/** @defgroup PWR_LL PWR - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PWR_LL_Exported_Functions - * @{ - */ - -/** @addtogroup PWR_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize the PWR registers to their default reset values. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: PWR registers are de-initialized - * - ERROR: not applicable - */ -ErrorStatus LL_PWR_DeInit(void) -{ - /* Force reset of PWR clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_PWR); - - /* Release reset of PWR clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_PWR); - - return SUCCESS; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined(PWR) */ -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_rcc.c b/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_rcc.c deleted file mode 100644 index 6a244fd..0000000 --- a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_rcc.c +++ /dev/null @@ -1,599 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_rcc.c - * @author MCD Application Team - * @brief RCC LL module driver. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_ll_rcc.h" -#ifdef USE_FULL_ASSERT - #include "stm32_assert.h" -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -#if defined(RCC) - -/** @defgroup RCC_LL RCC - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup RCC_LL_Private_Macros - * @{ - */ -#if defined(RCC_CFGR3_USART2SW) && defined(RCC_CFGR3_USART3SW) -#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \ - || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE) \ - || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE)) -#elif defined(RCC_CFGR3_USART2SW) && !defined(RCC_CFGR3_USART3SW) -#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \ - || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE)) -#elif defined(RCC_CFGR3_USART3SW) && !defined(RCC_CFGR3_USART2SW) -#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \ - || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE)) -#else -#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE)) -#endif /* RCC_CFGR3_USART2SW && RCC_CFGR3_USART3SW */ - -#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) - -#if defined(USB) -#define IS_LL_RCC_USB_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USB_CLKSOURCE)) -#endif /* USB */ - -#if defined(CEC) -#define IS_LL_RCC_CEC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_CEC_CLKSOURCE)) -#endif /* CEC */ - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup RCC_LL_Private_Functions RCC Private functions - * @{ - */ -uint32_t RCC_GetSystemClockFreq(void); -uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency); -uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency); -uint32_t RCC_PLL_GetFreqDomain_SYS(void); -/** - * @} - */ - - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RCC_LL_Exported_Functions - * @{ - */ - -/** @addtogroup RCC_LL_EF_Init - * @{ - */ - -/** - * @brief Reset the RCC clock configuration to the default reset state. - * @note The default reset state of the clock configuration is given below: - * - HSI ON and used as system clock source - * - HSE and PLL OFF - * - AHB and APB1 prescaler set to 1. - * - CSS, MCO OFF - * - All interrupts disabled - * @note This function doesn't modify the configuration of the - * - Peripheral clocks - * - LSI, LSE and RTC clocks - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RCC registers are de-initialized - * - ERROR: not applicable - */ -ErrorStatus LL_RCC_DeInit(void) -{ - uint32_t vl_mask = 0U; - - /* Set HSION bit */ - LL_RCC_HSI_Enable(); - - /* Set HSITRIM bits to the reset value*/ - LL_RCC_HSI_SetCalibTrimming(0x10U); - - /* Reset SW, HPRE, PPRE and MCOSEL bits */ - vl_mask = 0xFFFFFFFFU; - CLEAR_BIT(vl_mask, (RCC_CFGR_SW | RCC_CFGR_HPRE | RCC_CFGR_PPRE | RCC_CFGR_MCOSEL)); - LL_RCC_WriteReg(CFGR, vl_mask); - - /* Reset HSEON, CSSON, PLLON bits */ - vl_mask = 0xFFFFFFFFU; - CLEAR_BIT(vl_mask, (RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_HSEON)); - LL_RCC_WriteReg(CR, vl_mask); - - /* Reset HSEBYP bit */ - LL_RCC_HSE_DisableBypass(); - - /* Reset CFGR register */ - LL_RCC_WriteReg(CFGR, 0x00000000U); - -#if defined(RCC_HSI48_SUPPORT) - /* Reset CR2 register */ - LL_RCC_WriteReg(CR2, 0x00000000U); - - /* Disable HSI48 */ - LL_RCC_HSI48_Disable(); - -#endif /*RCC_HSI48_SUPPORT*/ - /* Set HSI14TRIM/HSI14ON/HSI14DIS bits to the reset value*/ - LL_RCC_HSI14_SetCalibTrimming(0x10U); - LL_RCC_HSI14_Disable(); - LL_RCC_HSI14_EnableADCControl(); - - /* Reset CFGR2 register */ - LL_RCC_WriteReg(CFGR2, 0x00000000U); - - /* Reset CFGR3 register */ - LL_RCC_WriteReg(CFGR3, 0x00000000U); - - /* Clear pending flags */ -#if defined(RCC_HSI48_SUPPORT) - vl_mask = (LL_RCC_CIR_LSIRDYC | LL_RCC_CIR_LSERDYC | LL_RCC_CIR_HSIRDYC | LL_RCC_CIR_HSERDYC | LL_RCC_CIR_PLLRDYC | LL_RCC_CIR_HSI14RDYC | LL_RCC_CIR_HSI48RDYC | LL_RCC_CIR_CSSC); -#else - vl_mask = (LL_RCC_CIR_LSIRDYC | LL_RCC_CIR_LSERDYC | LL_RCC_CIR_HSIRDYC | LL_RCC_CIR_HSERDYC | LL_RCC_CIR_PLLRDYC | LL_RCC_CIR_HSI14RDYC | LL_RCC_CIR_CSSC); -#endif /* RCC_HSI48_SUPPORT */ - SET_BIT(RCC->CIR, vl_mask); - - /* Disable all interrupts */ - LL_RCC_WriteReg(CIR, 0x00000000U); - - return SUCCESS; -} - -/** - * @} - */ - -/** @addtogroup RCC_LL_EF_Get_Freq - * @brief Return the frequencies of different on chip clocks; System, AHB and APB1 buses clocks - * and different peripheral clocks available on the device. - * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(**) - * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***) - * @note If SYSCLK source is PLL, function returns values based on - * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors. - * @note (**) HSI_VALUE is a defined constant but the real value may vary - * depending on the variations in voltage and temperature. - * @note (***) HSE_VALUE is a defined constant, user has to ensure that - * HSE_VALUE is same as the real frequency of the crystal used. - * Otherwise, this function may have wrong result. - * @note The result of this function could be incorrect when using fractional - * value for HSE crystal. - * @note This function can be used by the user application to compute the - * baud-rate for the communication peripherals or configure other parameters. - * @{ - */ - -/** - * @brief Return the frequencies of different on chip clocks; System, AHB and APB1 buses clocks - * @note Each time SYSCLK, HCLK and/or PCLK1 clock changes, this function - * must be called to update structure fields. Otherwise, any - * configuration based on this function will be incorrect. - * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies - * @retval None - */ -void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks) -{ - /* Get SYSCLK frequency */ - RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq(); - - /* HCLK clock frequency */ - RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency); - - /* PCLK1 clock frequency */ - RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency); -} - -/** - * @brief Return USARTx clock frequency - * @param USARTxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_USART1_CLKSOURCE - * @arg @ref LL_RCC_USART2_CLKSOURCE (*) - * @arg @ref LL_RCC_USART3_CLKSOURCE (*) - * - * (*) value not defined in all devices. - * @retval USART clock frequency (in Hz) - * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready - */ -uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource) -{ - uint32_t usart_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_USART_CLKSOURCE(USARTxSource)); -#if defined(RCC_CFGR3_USART1SW) - if (USARTxSource == LL_RCC_USART1_CLKSOURCE) - { - /* USART1CLK clock frequency */ - switch (LL_RCC_GetUSARTClockSource(USARTxSource)) - { - case LL_RCC_USART1_CLKSOURCE_SYSCLK: /* USART1 Clock is System Clock */ - usart_frequency = RCC_GetSystemClockFreq(); - break; - - case LL_RCC_USART1_CLKSOURCE_HSI: /* USART1 Clock is HSI Osc. */ - if (LL_RCC_HSI_IsReady()) - { - usart_frequency = HSI_VALUE; - } - break; - - case LL_RCC_USART1_CLKSOURCE_LSE: /* USART1 Clock is LSE Osc. */ - if (LL_RCC_LSE_IsReady()) - { - usart_frequency = LSE_VALUE; - } - break; - - case LL_RCC_USART1_CLKSOURCE_PCLK1: /* USART1 Clock is PCLK1 */ - default: - usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); - break; - } - } -#endif /* RCC_CFGR3_USART1SW */ - -#if defined(RCC_CFGR3_USART2SW) - if (USARTxSource == LL_RCC_USART2_CLKSOURCE) - { - /* USART2CLK clock frequency */ - switch (LL_RCC_GetUSARTClockSource(USARTxSource)) - { - case LL_RCC_USART2_CLKSOURCE_SYSCLK: /* USART2 Clock is System Clock */ - usart_frequency = RCC_GetSystemClockFreq(); - break; - - case LL_RCC_USART2_CLKSOURCE_HSI: /* USART2 Clock is HSI Osc. */ - if (LL_RCC_HSI_IsReady()) - { - usart_frequency = HSI_VALUE; - } - break; - - case LL_RCC_USART2_CLKSOURCE_LSE: /* USART2 Clock is LSE Osc. */ - if (LL_RCC_LSE_IsReady()) - { - usart_frequency = LSE_VALUE; - } - break; - - case LL_RCC_USART2_CLKSOURCE_PCLK1: /* USART2 Clock is PCLK1 */ - default: - usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); - break; - } - } -#endif /* RCC_CFGR3_USART2SW */ - -#if defined(RCC_CFGR3_USART3SW) - if (USARTxSource == LL_RCC_USART3_CLKSOURCE) - { - /* USART3CLK clock frequency */ - switch (LL_RCC_GetUSARTClockSource(USARTxSource)) - { - case LL_RCC_USART3_CLKSOURCE_SYSCLK: /* USART3 Clock is System Clock */ - usart_frequency = RCC_GetSystemClockFreq(); - break; - - case LL_RCC_USART3_CLKSOURCE_HSI: /* USART3 Clock is HSI Osc. */ - if (LL_RCC_HSI_IsReady()) - { - usart_frequency = HSI_VALUE; - } - break; - - case LL_RCC_USART3_CLKSOURCE_LSE: /* USART3 Clock is LSE Osc. */ - if (LL_RCC_LSE_IsReady()) - { - usart_frequency = LSE_VALUE; - } - break; - - case LL_RCC_USART3_CLKSOURCE_PCLK1: /* USART3 Clock is PCLK1 */ - default: - usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); - break; - } - } - -#endif /* RCC_CFGR3_USART3SW */ - return usart_frequency; -} - -/** - * @brief Return I2Cx clock frequency - * @param I2CxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_I2C1_CLKSOURCE - * @retval I2C clock frequency (in Hz) - * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that HSI oscillator is not ready - */ -uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource) -{ - uint32_t i2c_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_I2C_CLKSOURCE(I2CxSource)); - - /* I2C1 CLK clock frequency */ - if (I2CxSource == LL_RCC_I2C1_CLKSOURCE) - { - switch (LL_RCC_GetI2CClockSource(I2CxSource)) - { - case LL_RCC_I2C1_CLKSOURCE_SYSCLK: /* I2C1 Clock is System Clock */ - i2c_frequency = RCC_GetSystemClockFreq(); - break; - - case LL_RCC_I2C1_CLKSOURCE_HSI: /* I2C1 Clock is HSI Osc. */ - default: - if (LL_RCC_HSI_IsReady()) - { - i2c_frequency = HSI_VALUE; - } - break; - } - } - - return i2c_frequency; -} - -#if defined(USB) -/** - * @brief Return USBx clock frequency - * @param USBxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE - * @retval USB clock frequency (in Hz) - * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI48) or PLL is not ready - * @arg @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected - */ -uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource) -{ - uint32_t usb_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_USB_CLKSOURCE(USBxSource)); - - /* USBCLK clock frequency */ - switch (LL_RCC_GetUSBClockSource(USBxSource)) - { - case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */ - if (LL_RCC_PLL_IsReady()) - { - usb_frequency = RCC_PLL_GetFreqDomain_SYS(); - } - break; - -#if defined(RCC_CFGR3_USBSW_HSI48) - case LL_RCC_USB_CLKSOURCE_HSI48: /* HSI48 clock used as USB clock source */ - default: - if (LL_RCC_HSI48_IsReady()) - { - usb_frequency = HSI48_VALUE; - } - break; -#else - case LL_RCC_USB_CLKSOURCE_NONE: /* No clock used as USB clock source */ - default: - usb_frequency = LL_RCC_PERIPH_FREQUENCY_NA; - break; -#endif /* RCC_CFGR3_USBSW_HSI48 */ - } - - return usb_frequency; -} -#endif /* USB */ - -#if defined(CEC) -/** - * @brief Return CECx clock frequency - * @param CECxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE - * @retval CEC clock frequency (in Hz) - * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillators (HSI or LSE) are not ready - */ -uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource) -{ - uint32_t cec_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_CEC_CLKSOURCE(CECxSource)); - - /* CECCLK clock frequency */ - switch (LL_RCC_GetCECClockSource(CECxSource)) - { - case LL_RCC_CEC_CLKSOURCE_HSI_DIV244: /* HSI / 244 clock used as CEC clock source */ - if (LL_RCC_HSI_IsReady()) - { - cec_frequency = HSI_VALUE / 244U; - } - break; - - case LL_RCC_CEC_CLKSOURCE_LSE: /* LSE clock used as CEC clock source */ - default: - if (LL_RCC_LSE_IsReady()) - { - cec_frequency = LSE_VALUE; - } - break; - } - - return cec_frequency; -} -#endif /* CEC */ - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup RCC_LL_Private_Functions - * @{ - */ - -/** - * @brief Return SYSTEM clock frequency - * @retval SYSTEM clock frequency (in Hz) - */ -uint32_t RCC_GetSystemClockFreq(void) -{ - uint32_t frequency = 0U; - - /* Get SYSCLK source -------------------------------------------------------*/ - switch (LL_RCC_GetSysClkSource()) - { - case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ - frequency = HSI_VALUE; - break; - - case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */ - frequency = HSE_VALUE; - break; - - case LL_RCC_SYS_CLKSOURCE_STATUS_PLL: /* PLL used as system clock source */ - frequency = RCC_PLL_GetFreqDomain_SYS(); - break; - -#if defined(RCC_HSI48_SUPPORT) - case LL_RCC_SYS_CLKSOURCE_STATUS_HSI48:/* HSI48 used as system clock source */ - frequency = HSI48_VALUE; - break; -#endif /* RCC_HSI48_SUPPORT */ - - default: - frequency = HSI_VALUE; - break; - } - - return frequency; -} - -/** - * @brief Return HCLK clock frequency - * @param SYSCLK_Frequency SYSCLK clock frequency - * @retval HCLK clock frequency (in Hz) - */ -uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency) -{ - /* HCLK clock frequency */ - return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler()); -} - -/** - * @brief Return PCLK1 clock frequency - * @param HCLK_Frequency HCLK clock frequency - * @retval PCLK1 clock frequency (in Hz) - */ -uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency) -{ - /* PCLK1 clock frequency */ - return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler()); -} -/** - * @brief Return PLL clock frequency used for system domain - * @retval PLL clock frequency (in Hz) - */ -uint32_t RCC_PLL_GetFreqDomain_SYS(void) -{ - uint32_t pllinputfreq = 0U, pllsource = 0U; - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL divider) * PLL Multiplicator */ - - /* Get PLL source */ - pllsource = LL_RCC_PLL_GetMainSource(); - - switch (pllsource) - { -#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ - pllinputfreq = HSI_VALUE; -#else - case LL_RCC_PLLSOURCE_HSI_DIV_2: /* HSI used as PLL clock source */ - pllinputfreq = HSI_VALUE / 2U; -#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */ - break; - -#if defined(RCC_HSI48_SUPPORT) - case LL_RCC_PLLSOURCE_HSI48: /* HSI48 used as PLL clock source */ - pllinputfreq = HSI48_VALUE; - break; -#endif /* RCC_HSI48_SUPPORT */ - - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - pllinputfreq = HSE_VALUE; - break; - - default: -#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) - pllinputfreq = HSI_VALUE; -#else - pllinputfreq = HSI_VALUE / 2U; -#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */ - break; - } -#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) - return __LL_RCC_CALC_PLLCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetMultiplicator(), LL_RCC_PLL_GetPrediv()); -#else - return __LL_RCC_CALC_PLLCLK_FREQ((pllinputfreq / (LL_RCC_PLL_GetPrediv() + 1U)), LL_RCC_PLL_GetMultiplicator()); -#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */ -} -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(RCC) */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_spi.c b/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_spi.c deleted file mode 100644 index 3005490..0000000 --- a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_spi.c +++ /dev/null @@ -1,545 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_spi.c - * @author MCD Application Team - * @brief SPI LL module driver. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_ll_spi.h" -#include "stm32f0xx_ll_bus.h" -#include "stm32f0xx_ll_rcc.h" - -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -#if defined (SPI1) || defined (SPI2) - -/** @addtogroup SPI_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup SPI_LL_Private_Constants SPI Private Constants - * @{ - */ -/* SPI registers Masks */ -#define SPI_CR1_CLEAR_MASK (SPI_CR1_CPHA | SPI_CR1_CPOL | SPI_CR1_MSTR | \ - SPI_CR1_BR | SPI_CR1_LSBFIRST | SPI_CR1_SSI | \ - SPI_CR1_SSM | SPI_CR1_RXONLY | SPI_CR1_CRCL | \ - SPI_CR1_CRCNEXT | SPI_CR1_CRCEN | SPI_CR1_BIDIOE | \ - SPI_CR1_BIDIMODE) -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup SPI_LL_Private_Macros SPI Private Macros - * @{ - */ -#define IS_LL_SPI_TRANSFER_DIRECTION(__VALUE__) (((__VALUE__) == LL_SPI_FULL_DUPLEX) \ - || ((__VALUE__) == LL_SPI_SIMPLEX_RX) \ - || ((__VALUE__) == LL_SPI_HALF_DUPLEX_RX) \ - || ((__VALUE__) == LL_SPI_HALF_DUPLEX_TX)) - -#define IS_LL_SPI_MODE(__VALUE__) (((__VALUE__) == LL_SPI_MODE_MASTER) \ - || ((__VALUE__) == LL_SPI_MODE_SLAVE)) - -#define IS_LL_SPI_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_SPI_DATAWIDTH_4BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_5BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_6BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_7BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_8BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_9BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_10BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_11BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_12BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_13BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_14BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_15BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_16BIT)) - -#define IS_LL_SPI_POLARITY(__VALUE__) (((__VALUE__) == LL_SPI_POLARITY_LOW) \ - || ((__VALUE__) == LL_SPI_POLARITY_HIGH)) - -#define IS_LL_SPI_PHASE(__VALUE__) (((__VALUE__) == LL_SPI_PHASE_1EDGE) \ - || ((__VALUE__) == LL_SPI_PHASE_2EDGE)) - -#define IS_LL_SPI_NSS(__VALUE__) (((__VALUE__) == LL_SPI_NSS_SOFT) \ - || ((__VALUE__) == LL_SPI_NSS_HARD_INPUT) \ - || ((__VALUE__) == LL_SPI_NSS_HARD_OUTPUT)) - -#define IS_LL_SPI_BAUDRATE(__VALUE__) (((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV2) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV4) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV8) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV16) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV32) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV64) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV128) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV256)) - -#define IS_LL_SPI_BITORDER(__VALUE__) (((__VALUE__) == LL_SPI_LSB_FIRST) \ - || ((__VALUE__) == LL_SPI_MSB_FIRST)) - -#define IS_LL_SPI_CRCCALCULATION(__VALUE__) (((__VALUE__) == LL_SPI_CRCCALCULATION_ENABLE) \ - || ((__VALUE__) == LL_SPI_CRCCALCULATION_DISABLE)) - -#define IS_LL_SPI_CRC_POLYNOMIAL(__VALUE__) ((__VALUE__) >= 0x1U) - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SPI_LL_Exported_Functions - * @{ - */ - -/** @addtogroup SPI_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize the SPI registers to their default reset values. - * @param SPIx SPI Instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: SPI registers are de-initialized - * - ERROR: SPI registers are not de-initialized - */ -ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx) -{ - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_INSTANCE(SPIx)); - -#if defined(SPI1) - if (SPIx == SPI1) - { - /* Force reset of SPI clock */ - LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_SPI1); - - /* Release reset of SPI clock */ - LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_SPI1); - - status = SUCCESS; - } -#endif /* SPI1 */ -#if defined(SPI2) - if (SPIx == SPI2) - { - /* Force reset of SPI clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI2); - - /* Release reset of SPI clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI2); - - status = SUCCESS; - } -#endif /* SPI2 */ - - return status; -} - -/** - * @brief Initialize the SPI registers according to the specified parameters in SPI_InitStruct. - * @note As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0), - * SPI IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. - * @param SPIx SPI Instance - * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure - * @retval An ErrorStatus enumeration value. (Return always SUCCESS) - */ -ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct) -{ - ErrorStatus status = ERROR; - - /* Check the SPI Instance SPIx*/ - assert_param(IS_SPI_ALL_INSTANCE(SPIx)); - - /* Check the SPI parameters from SPI_InitStruct*/ - assert_param(IS_LL_SPI_TRANSFER_DIRECTION(SPI_InitStruct->TransferDirection)); - assert_param(IS_LL_SPI_MODE(SPI_InitStruct->Mode)); - assert_param(IS_LL_SPI_DATAWIDTH(SPI_InitStruct->DataWidth)); - assert_param(IS_LL_SPI_POLARITY(SPI_InitStruct->ClockPolarity)); - assert_param(IS_LL_SPI_PHASE(SPI_InitStruct->ClockPhase)); - assert_param(IS_LL_SPI_NSS(SPI_InitStruct->NSS)); - assert_param(IS_LL_SPI_BAUDRATE(SPI_InitStruct->BaudRate)); - assert_param(IS_LL_SPI_BITORDER(SPI_InitStruct->BitOrder)); - assert_param(IS_LL_SPI_CRCCALCULATION(SPI_InitStruct->CRCCalculation)); - - if (LL_SPI_IsEnabled(SPIx) == 0x00000000U) - { - /*---------------------------- SPIx CR1 Configuration ------------------------ - * Configure SPIx CR1 with parameters: - * - TransferDirection: SPI_CR1_BIDIMODE, SPI_CR1_BIDIOE and SPI_CR1_RXONLY bits - * - Master/Slave Mode: SPI_CR1_MSTR bit - * - ClockPolarity: SPI_CR1_CPOL bit - * - ClockPhase: SPI_CR1_CPHA bit - * - NSS management: SPI_CR1_SSM bit - * - BaudRate prescaler: SPI_CR1_BR[2:0] bits - * - BitOrder: SPI_CR1_LSBFIRST bit - * - CRCCalculation: SPI_CR1_CRCEN bit - */ - MODIFY_REG(SPIx->CR1, - SPI_CR1_CLEAR_MASK, - SPI_InitStruct->TransferDirection | SPI_InitStruct->Mode | - SPI_InitStruct->ClockPolarity | SPI_InitStruct->ClockPhase | - SPI_InitStruct->NSS | SPI_InitStruct->BaudRate | - SPI_InitStruct->BitOrder | SPI_InitStruct->CRCCalculation); - - /*---------------------------- SPIx CR2 Configuration ------------------------ - * Configure SPIx CR2 with parameters: - * - DataWidth: DS[3:0] bits - * - NSS management: SSOE bit - */ - MODIFY_REG(SPIx->CR2, - SPI_CR2_DS | SPI_CR2_SSOE, - SPI_InitStruct->DataWidth | (SPI_InitStruct->NSS >> 16U)); - - /*---------------------------- SPIx CRCPR Configuration ---------------------- - * Configure SPIx CRCPR with parameters: - * - CRCPoly: CRCPOLY[15:0] bits - */ - if (SPI_InitStruct->CRCCalculation == LL_SPI_CRCCALCULATION_ENABLE) - { - assert_param(IS_LL_SPI_CRC_POLYNOMIAL(SPI_InitStruct->CRCPoly)); - LL_SPI_SetCRCPolynomial(SPIx, SPI_InitStruct->CRCPoly); - } - status = SUCCESS; - } - -#if defined (SPI_I2S_SUPPORT) - /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ - CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD); -#endif /* SPI_I2S_SUPPORT */ - return status; -} - -/** - * @brief Set each @ref LL_SPI_InitTypeDef field to default value. - * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure - * whose fields will be set to default values. - * @retval None - */ -void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct) -{ - /* Set SPI_InitStruct fields to default values */ - SPI_InitStruct->TransferDirection = LL_SPI_FULL_DUPLEX; - SPI_InitStruct->Mode = LL_SPI_MODE_SLAVE; - SPI_InitStruct->DataWidth = LL_SPI_DATAWIDTH_8BIT; - SPI_InitStruct->ClockPolarity = LL_SPI_POLARITY_LOW; - SPI_InitStruct->ClockPhase = LL_SPI_PHASE_1EDGE; - SPI_InitStruct->NSS = LL_SPI_NSS_HARD_INPUT; - SPI_InitStruct->BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2; - SPI_InitStruct->BitOrder = LL_SPI_MSB_FIRST; - SPI_InitStruct->CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; - SPI_InitStruct->CRCPoly = 7U; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#if defined(SPI_I2S_SUPPORT) -/** @addtogroup I2S_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2S_LL_Private_Constants I2S Private Constants - * @{ - */ -/* I2S registers Masks */ -#define I2S_I2SCFGR_CLEAR_MASK (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ - SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD | \ - SPI_I2SCFGR_I2SCFG | SPI_I2SCFGR_I2SMOD ) - -#define I2S_I2SPR_CLEAR_MASK 0x0002U -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2S_LL_Private_Macros I2S Private Macros - * @{ - */ - -#define IS_LL_I2S_DATAFORMAT(__VALUE__) (((__VALUE__) == LL_I2S_DATAFORMAT_16B) \ - || ((__VALUE__) == LL_I2S_DATAFORMAT_16B_EXTENDED) \ - || ((__VALUE__) == LL_I2S_DATAFORMAT_24B) \ - || ((__VALUE__) == LL_I2S_DATAFORMAT_32B)) - -#define IS_LL_I2S_CPOL(__VALUE__) (((__VALUE__) == LL_I2S_POLARITY_LOW) \ - || ((__VALUE__) == LL_I2S_POLARITY_HIGH)) - -#define IS_LL_I2S_STANDARD(__VALUE__) (((__VALUE__) == LL_I2S_STANDARD_PHILIPS) \ - || ((__VALUE__) == LL_I2S_STANDARD_MSB) \ - || ((__VALUE__) == LL_I2S_STANDARD_LSB) \ - || ((__VALUE__) == LL_I2S_STANDARD_PCM_SHORT) \ - || ((__VALUE__) == LL_I2S_STANDARD_PCM_LONG)) - -#define IS_LL_I2S_MODE(__VALUE__) (((__VALUE__) == LL_I2S_MODE_SLAVE_TX) \ - || ((__VALUE__) == LL_I2S_MODE_SLAVE_RX) \ - || ((__VALUE__) == LL_I2S_MODE_MASTER_TX) \ - || ((__VALUE__) == LL_I2S_MODE_MASTER_RX)) - -#define IS_LL_I2S_MCLK_OUTPUT(__VALUE__) (((__VALUE__) == LL_I2S_MCLK_OUTPUT_ENABLE) \ - || ((__VALUE__) == LL_I2S_MCLK_OUTPUT_DISABLE)) - -#define IS_LL_I2S_AUDIO_FREQ(__VALUE__) ((((__VALUE__) >= LL_I2S_AUDIOFREQ_8K) \ - && ((__VALUE__) <= LL_I2S_AUDIOFREQ_192K)) \ - || ((__VALUE__) == LL_I2S_AUDIOFREQ_DEFAULT)) - -#define IS_LL_I2S_PRESCALER_LINEAR(__VALUE__) ((__VALUE__) >= 0x2U) - -#define IS_LL_I2S_PRESCALER_PARITY(__VALUE__) (((__VALUE__) == LL_I2S_PRESCALER_PARITY_EVEN) \ - || ((__VALUE__) == LL_I2S_PRESCALER_PARITY_ODD)) -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2S_LL_Exported_Functions - * @{ - */ - -/** @addtogroup I2S_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize the SPI/I2S registers to their default reset values. - * @param SPIx SPI Instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: SPI registers are de-initialized - * - ERROR: SPI registers are not de-initialized - */ -ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx) -{ - return LL_SPI_DeInit(SPIx); -} - -/** - * @brief Initializes the SPI/I2S registers according to the specified parameters in I2S_InitStruct. - * @note As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0), - * SPI IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. - * @param SPIx SPI Instance - * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure - * @retval An ErrorStatus enumeration value: - * - SUCCESS: SPI registers are Initialized - * - ERROR: SPI registers are not Initialized - */ -ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct) -{ - uint16_t i2sdiv = 2U, i2sodd = 0U, packetlength = 1U; - uint32_t tmp = 0U; - LL_RCC_ClocksTypeDef rcc_clocks; - uint32_t sourceclock = 0U; - ErrorStatus status = ERROR; - - /* Check the I2S parameters */ - assert_param(IS_I2S_ALL_INSTANCE(SPIx)); - assert_param(IS_LL_I2S_MODE(I2S_InitStruct->Mode)); - assert_param(IS_LL_I2S_STANDARD(I2S_InitStruct->Standard)); - assert_param(IS_LL_I2S_DATAFORMAT(I2S_InitStruct->DataFormat)); - assert_param(IS_LL_I2S_MCLK_OUTPUT(I2S_InitStruct->MCLKOutput)); - assert_param(IS_LL_I2S_AUDIO_FREQ(I2S_InitStruct->AudioFreq)); - assert_param(IS_LL_I2S_CPOL(I2S_InitStruct->ClockPolarity)); - - if (LL_I2S_IsEnabled(SPIx) == 0x00000000U) - { - /*---------------------------- SPIx I2SCFGR Configuration -------------------- - * Configure SPIx I2SCFGR with parameters: - * - Mode: SPI_I2SCFGR_I2SCFG[1:0] bit - * - Standard: SPI_I2SCFGR_I2SSTD[1:0] and SPI_I2SCFGR_PCMSYNC bits - * - DataFormat: SPI_I2SCFGR_CHLEN and SPI_I2SCFGR_DATLEN bits - * - ClockPolarity: SPI_I2SCFGR_CKPOL bit - */ - - /* Write to SPIx I2SCFGR */ - MODIFY_REG(SPIx->I2SCFGR, - I2S_I2SCFGR_CLEAR_MASK, - I2S_InitStruct->Mode | I2S_InitStruct->Standard | - I2S_InitStruct->DataFormat | I2S_InitStruct->ClockPolarity | - SPI_I2SCFGR_I2SMOD); - - /*---------------------------- SPIx I2SPR Configuration ---------------------- - * Configure SPIx I2SPR with parameters: - * - MCLKOutput: SPI_I2SPR_MCKOE bit - * - AudioFreq: SPI_I2SPR_I2SDIV[7:0] and SPI_I2SPR_ODD bits - */ - - /* If the requested audio frequency is not the default, compute the prescaler (i2sodd, i2sdiv) - * else, default values are used: i2sodd = 0U, i2sdiv = 2U. - */ - if (I2S_InitStruct->AudioFreq != LL_I2S_AUDIOFREQ_DEFAULT) - { - /* Check the frame length (For the Prescaler computing) - * Default value: LL_I2S_DATAFORMAT_16B (packetlength = 1U). - */ - if (I2S_InitStruct->DataFormat != LL_I2S_DATAFORMAT_16B) - { - /* Packet length is 32 bits */ - packetlength = 2U; - } - - /* I2S Clock source is System clock: Get System Clock frequency */ - LL_RCC_GetSystemClocksFreq(&rcc_clocks); - - /* Get the source clock value: based on System Clock value */ - sourceclock = rcc_clocks.SYSCLK_Frequency; - - /* Compute the Real divider depending on the MCLK output state with a floating point */ - if (I2S_InitStruct->MCLKOutput == LL_I2S_MCLK_OUTPUT_ENABLE) - { - /* MCLK output is enabled */ - tmp = (uint16_t)(((((sourceclock / 256U) * 10U) / I2S_InitStruct->AudioFreq)) + 5U); - } - else - { - /* MCLK output is disabled */ - tmp = (uint16_t)(((((sourceclock / (32U * packetlength)) * 10U) / I2S_InitStruct->AudioFreq)) + 5U); - } - - /* Remove the floating point */ - tmp = tmp / 10U; - - /* Check the parity of the divider */ - i2sodd = (uint16_t)(tmp & (uint16_t)0x0001U); - - /* Compute the i2sdiv prescaler */ - i2sdiv = (uint16_t)((tmp - i2sodd) / 2U); - - /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ - i2sodd = (uint16_t)(i2sodd << 8U); - } - - /* Test if the divider is 1 or 0 or greater than 0xFF */ - if ((i2sdiv < 2U) || (i2sdiv > 0xFFU)) - { - /* Set the default values */ - i2sdiv = 2U; - i2sodd = 0U; - } - - /* Write to SPIx I2SPR register the computed value */ - WRITE_REG(SPIx->I2SPR, i2sdiv | i2sodd | I2S_InitStruct->MCLKOutput); - - status = SUCCESS; - } - return status; -} - -/** - * @brief Set each @ref LL_I2S_InitTypeDef field to default value. - * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure - * whose fields will be set to default values. - * @retval None - */ -void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct) -{ - /*--------------- Reset I2S init structure parameters values -----------------*/ - I2S_InitStruct->Mode = LL_I2S_MODE_SLAVE_TX; - I2S_InitStruct->Standard = LL_I2S_STANDARD_PHILIPS; - I2S_InitStruct->DataFormat = LL_I2S_DATAFORMAT_16B; - I2S_InitStruct->MCLKOutput = LL_I2S_MCLK_OUTPUT_DISABLE; - I2S_InitStruct->AudioFreq = LL_I2S_AUDIOFREQ_DEFAULT; - I2S_InitStruct->ClockPolarity = LL_I2S_POLARITY_LOW; -} - -/** - * @brief Set linear and parity prescaler. - * @note To calculate value of PrescalerLinear(I2SDIV[7:0] bits) and PrescalerParity(ODD bit)\n - * Check Audio frequency table and formulas inside Reference Manual (SPI/I2S). - * @param SPIx SPI Instance - * @param PrescalerLinear value: Min_Data=0x02 and Max_Data=0xFF. - * @param PrescalerParity This parameter can be one of the following values: - * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN - * @arg @ref LL_I2S_PRESCALER_PARITY_ODD - * @retval None - */ -void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity) -{ - /* Check the I2S parameters */ - assert_param(IS_I2S_ALL_INSTANCE(SPIx)); - assert_param(IS_LL_I2S_PRESCALER_LINEAR(PrescalerLinear)); - assert_param(IS_LL_I2S_PRESCALER_PARITY(PrescalerParity)); - - /* Write to SPIx I2SPR */ - MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV | SPI_I2SPR_ODD, PrescalerLinear | (PrescalerParity << 8U)); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* SPI_I2S_SUPPORT */ - -#endif /* defined (SPI1) || defined (SPI2) */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_tim.c b/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_tim.c deleted file mode 100644 index fa745e1..0000000 --- a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_tim.c +++ /dev/null @@ -1,1175 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_tim.c - * @author MCD Application Team - * @brief TIM LL module driver. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_ll_tim.h" -#include "stm32f0xx_ll_bus.h" - -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM14) || defined (TIM15) || defined (TIM16) || defined (TIM17) || defined (TIM6) || defined (TIM7) - -/** @addtogroup TIM_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup TIM_LL_Private_Macros - * @{ - */ -#define IS_LL_TIM_COUNTERMODE(__VALUE__) (((__VALUE__) == LL_TIM_COUNTERMODE_UP) \ - || ((__VALUE__) == LL_TIM_COUNTERMODE_DOWN) \ - || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP) \ - || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_DOWN) \ - || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP_DOWN)) - -#define IS_LL_TIM_CLOCKDIVISION(__VALUE__) (((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV1) \ - || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV2) \ - || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV4)) - -#define IS_LL_TIM_OCMODE(__VALUE__) (((__VALUE__) == LL_TIM_OCMODE_FROZEN) \ - || ((__VALUE__) == LL_TIM_OCMODE_ACTIVE) \ - || ((__VALUE__) == LL_TIM_OCMODE_INACTIVE) \ - || ((__VALUE__) == LL_TIM_OCMODE_TOGGLE) \ - || ((__VALUE__) == LL_TIM_OCMODE_FORCED_INACTIVE) \ - || ((__VALUE__) == LL_TIM_OCMODE_FORCED_ACTIVE) \ - || ((__VALUE__) == LL_TIM_OCMODE_PWM1) \ - || ((__VALUE__) == LL_TIM_OCMODE_PWM2)) - -#define IS_LL_TIM_OCSTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCSTATE_DISABLE) \ - || ((__VALUE__) == LL_TIM_OCSTATE_ENABLE)) - -#define IS_LL_TIM_OCPOLARITY(__VALUE__) (((__VALUE__) == LL_TIM_OCPOLARITY_HIGH) \ - || ((__VALUE__) == LL_TIM_OCPOLARITY_LOW)) - -#define IS_LL_TIM_OCIDLESTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCIDLESTATE_LOW) \ - || ((__VALUE__) == LL_TIM_OCIDLESTATE_HIGH)) - -#define IS_LL_TIM_ACTIVEINPUT(__VALUE__) (((__VALUE__) == LL_TIM_ACTIVEINPUT_DIRECTTI) \ - || ((__VALUE__) == LL_TIM_ACTIVEINPUT_INDIRECTTI) \ - || ((__VALUE__) == LL_TIM_ACTIVEINPUT_TRC)) - -#define IS_LL_TIM_ICPSC(__VALUE__) (((__VALUE__) == LL_TIM_ICPSC_DIV1) \ - || ((__VALUE__) == LL_TIM_ICPSC_DIV2) \ - || ((__VALUE__) == LL_TIM_ICPSC_DIV4) \ - || ((__VALUE__) == LL_TIM_ICPSC_DIV8)) - -#define IS_LL_TIM_IC_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_IC_FILTER_FDIV1) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N2) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N4) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N8) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N6) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N8) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N6) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N8) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N6) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N8) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N5) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N6) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N8) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N5) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N6) \ - || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N8)) - -#define IS_LL_TIM_IC_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ - || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING) \ - || ((__VALUE__) == LL_TIM_IC_POLARITY_BOTHEDGE)) - -#define IS_LL_TIM_ENCODERMODE(__VALUE__) (((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI1) \ - || ((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI2) \ - || ((__VALUE__) == LL_TIM_ENCODERMODE_X4_TI12)) - -#define IS_LL_TIM_IC_POLARITY_ENCODER(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ - || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING)) - -#define IS_LL_TIM_OSSR_STATE(__VALUE__) (((__VALUE__) == LL_TIM_OSSR_DISABLE) \ - || ((__VALUE__) == LL_TIM_OSSR_ENABLE)) - -#define IS_LL_TIM_OSSI_STATE(__VALUE__) (((__VALUE__) == LL_TIM_OSSI_DISABLE) \ - || ((__VALUE__) == LL_TIM_OSSI_ENABLE)) - -#define IS_LL_TIM_LOCK_LEVEL(__VALUE__) (((__VALUE__) == LL_TIM_LOCKLEVEL_OFF) \ - || ((__VALUE__) == LL_TIM_LOCKLEVEL_1) \ - || ((__VALUE__) == LL_TIM_LOCKLEVEL_2) \ - || ((__VALUE__) == LL_TIM_LOCKLEVEL_3)) - -#define IS_LL_TIM_BREAK_STATE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_DISABLE) \ - || ((__VALUE__) == LL_TIM_BREAK_ENABLE)) - -#define IS_LL_TIM_BREAK_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_POLARITY_LOW) \ - || ((__VALUE__) == LL_TIM_BREAK_POLARITY_HIGH)) - -#define IS_LL_TIM_AUTOMATIC_OUTPUT_STATE(__VALUE__) (((__VALUE__) == LL_TIM_AUTOMATICOUTPUT_DISABLE) \ - || ((__VALUE__) == LL_TIM_AUTOMATICOUTPUT_ENABLE)) -/** - * @} - */ - - -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup TIM_LL_Private_Functions TIM Private Functions - * @{ - */ -static ErrorStatus OC1Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); -static ErrorStatus OC2Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); -static ErrorStatus OC3Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); -static ErrorStatus OC4Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); -static ErrorStatus IC1Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); -static ErrorStatus IC2Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); -static ErrorStatus IC3Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); -static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIM_LL_Exported_Functions - * @{ - */ - -/** @addtogroup TIM_LL_EF_Init - * @{ - */ - -/** - * @brief Set TIMx registers to their reset values. - * @param TIMx Timer instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx registers are de-initialized - * - ERROR: invalid TIMx instance - */ -ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx) -{ - ErrorStatus result = SUCCESS; - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(TIMx)); - - if (TIMx == TIM1) - { - LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_TIM1); - LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_TIM1); - } -#if defined (TIM2) - else if (TIMx == TIM2) - { - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM2); - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM2); - } -#endif -#if defined(TIM3) - else if (TIMx == TIM3) - { - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM3); - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM3); - } -#endif -#if defined(TIM5) - else if (TIMx == TIM5) - { - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM5); - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM5); - } -#endif -#if defined (TIM6) - else if (TIMx == TIM6) - { - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM6); - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM6); - } -#endif -#if defined (TIM7) - else if (TIMx == TIM7) - { - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM7); - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM7); - } -#endif -#if defined(TIM8) - else if (TIMx == TIM8) - { - LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM8); - LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM8); - } -#endif -#if defined (TIM14) - else if (TIMx == TIM14) - { - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM14); - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM14); - } -#endif -#if defined (TIM15) - else if (TIMx == TIM15) - { - LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_TIM15); - LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_TIM15); - } -#endif -#if defined (TIM16) - else if (TIMx == TIM16) - { - LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_TIM16); - LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_TIM16); - } -#endif -#if defined(TIM17) - else if (TIMx == TIM17) - { - LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_TIM17); - LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_TIM17); - } -#endif - else - { - result = ERROR; - } - - return result; -} - -/** - * @brief Set the fields of the time base unit configuration data structure - * to their default values. - * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (time base unit configuration data structure) - * @retval None - */ -void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct) -{ - /* Set the default configuration */ - TIM_InitStruct->Prescaler = (uint16_t)0x0000U; - TIM_InitStruct->CounterMode = LL_TIM_COUNTERMODE_UP; - TIM_InitStruct->Autoreload = 0xFFFFFFFFU; - TIM_InitStruct->ClockDivision = LL_TIM_CLOCKDIVISION_DIV1; - TIM_InitStruct->RepetitionCounter = (uint8_t)0x00U; -} - -/** - * @brief Configure the TIMx time base unit. - * @param TIMx Timer Instance - * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (TIMx time base unit configuration data structure) - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx registers are de-initialized - * - ERROR: not applicable - */ -ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct) -{ - uint32_t tmpcr1 = 0U; - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(TIMx)); - assert_param(IS_LL_TIM_COUNTERMODE(TIM_InitStruct->CounterMode)); - assert_param(IS_LL_TIM_CLOCKDIVISION(TIM_InitStruct->ClockDivision)); - - tmpcr1 = LL_TIM_ReadReg(TIMx, CR1); - - if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) - { - /* Select the Counter Mode */ - MODIFY_REG(tmpcr1, (TIM_CR1_DIR | TIM_CR1_CMS), TIM_InitStruct->CounterMode); - } - - if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) - { - /* Set the clock division */ - MODIFY_REG(tmpcr1, TIM_CR1_CKD, TIM_InitStruct->ClockDivision); - } - - /* Write to TIMx CR1 */ - LL_TIM_WriteReg(TIMx, CR1, tmpcr1); - - /* Set the Autoreload value */ - LL_TIM_SetAutoReload(TIMx, TIM_InitStruct->Autoreload); - - /* Set the Prescaler value */ - LL_TIM_SetPrescaler(TIMx, TIM_InitStruct->Prescaler); - - if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) - { - /* Set the Repetition Counter value */ - LL_TIM_SetRepetitionCounter(TIMx, TIM_InitStruct->RepetitionCounter); - } - - /* Generate an update event to reload the Prescaler - and the repetition counter value (if applicable) immediately */ - LL_TIM_GenerateEvent_UPDATE(TIMx); - - return SUCCESS; -} - -/** - * @brief Set the fields of the TIMx output channel configuration data - * structure to their default values. - * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (the output channel configuration data structure) - * @retval None - */ -void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) -{ - /* Set the default configuration */ - TIM_OC_InitStruct->OCMode = LL_TIM_OCMODE_FROZEN; - TIM_OC_InitStruct->OCState = LL_TIM_OCSTATE_DISABLE; - TIM_OC_InitStruct->OCNState = LL_TIM_OCSTATE_DISABLE; - TIM_OC_InitStruct->CompareValue = 0x00000000U; - TIM_OC_InitStruct->OCPolarity = LL_TIM_OCPOLARITY_HIGH; - TIM_OC_InitStruct->OCNPolarity = LL_TIM_OCPOLARITY_HIGH; - TIM_OC_InitStruct->OCIdleState = LL_TIM_OCIDLESTATE_LOW; - TIM_OC_InitStruct->OCNIdleState = LL_TIM_OCIDLESTATE_LOW; -} - -/** - * @brief Configure the TIMx output channel. - * @param TIMx Timer Instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (TIMx output channel configuration data structure) - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx output channel is initialized - * - ERROR: TIMx output channel is not initialized - */ -ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) -{ - ErrorStatus result = ERROR; - - switch (Channel) - { - case LL_TIM_CHANNEL_CH1: - result = OC1Config(TIMx, TIM_OC_InitStruct); - break; - case LL_TIM_CHANNEL_CH2: - result = OC2Config(TIMx, TIM_OC_InitStruct); - break; - case LL_TIM_CHANNEL_CH3: - result = OC3Config(TIMx, TIM_OC_InitStruct); - break; - case LL_TIM_CHANNEL_CH4: - result = OC4Config(TIMx, TIM_OC_InitStruct); - break; - default: - break; - } - - return result; -} - -/** - * @brief Set the fields of the TIMx input channel configuration data - * structure to their default values. - * @param TIM_ICInitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (the input channel configuration data structure) - * @retval None - */ -void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) -{ - /* Set the default configuration */ - TIM_ICInitStruct->ICPolarity = LL_TIM_IC_POLARITY_RISING; - TIM_ICInitStruct->ICActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; - TIM_ICInitStruct->ICPrescaler = LL_TIM_ICPSC_DIV1; - TIM_ICInitStruct->ICFilter = LL_TIM_IC_FILTER_FDIV1; -} - -/** - * @brief Configure the TIMx input channel. - * @param TIMx Timer Instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @param TIM_IC_InitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (TIMx input channel configuration data structure) - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx output channel is initialized - * - ERROR: TIMx output channel is not initialized - */ -ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct) -{ - ErrorStatus result = ERROR; - - switch (Channel) - { - case LL_TIM_CHANNEL_CH1: - result = IC1Config(TIMx, TIM_IC_InitStruct); - break; - case LL_TIM_CHANNEL_CH2: - result = IC2Config(TIMx, TIM_IC_InitStruct); - break; - case LL_TIM_CHANNEL_CH3: - result = IC3Config(TIMx, TIM_IC_InitStruct); - break; - case LL_TIM_CHANNEL_CH4: - result = IC4Config(TIMx, TIM_IC_InitStruct); - break; - default: - break; - } - - return result; -} - -/** - * @brief Fills each TIM_EncoderInitStruct field with its default value - * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (encoder interface configuration data structure) - * @retval None - */ -void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) -{ - /* Set the default configuration */ - TIM_EncoderInitStruct->EncoderMode = LL_TIM_ENCODERMODE_X2_TI1; - TIM_EncoderInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; - TIM_EncoderInitStruct->IC1ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; - TIM_EncoderInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; - TIM_EncoderInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; - TIM_EncoderInitStruct->IC2Polarity = LL_TIM_IC_POLARITY_RISING; - TIM_EncoderInitStruct->IC2ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; - TIM_EncoderInitStruct->IC2Prescaler = LL_TIM_ICPSC_DIV1; - TIM_EncoderInitStruct->IC2Filter = LL_TIM_IC_FILTER_FDIV1; -} - -/** - * @brief Configure the encoder interface of the timer instance. - * @param TIMx Timer Instance - * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (TIMx encoder interface configuration data structure) - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx registers are de-initialized - * - ERROR: not applicable - */ -ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) -{ - uint32_t tmpccmr1 = 0U; - uint32_t tmpccer = 0U; - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx)); - assert_param(IS_LL_TIM_ENCODERMODE(TIM_EncoderInitStruct->EncoderMode)); - assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC1Polarity)); - assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC1ActiveInput)); - assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC1Prescaler)); - assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC1Filter)); - assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC2Polarity)); - assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC2ActiveInput)); - assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC2Prescaler)); - assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC2Filter)); - - /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ - TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); - - /* Get the TIMx CCER register value */ - tmpccer = LL_TIM_ReadReg(TIMx, CCER); - - /* Configure TI1 */ - tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); - tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1ActiveInput >> 16U); - tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Filter >> 16U); - tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Prescaler >> 16U); - - /* Configure TI2 */ - tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC); - tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2ActiveInput >> 8U); - tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Filter >> 8U); - tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Prescaler >> 8U); - - /* Set TI1 and TI2 polarity and enable TI1 and TI2 */ - tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC1Polarity); - tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC2Polarity << 4U); - tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); - - /* Set encoder mode */ - LL_TIM_SetEncoderMode(TIMx, TIM_EncoderInitStruct->EncoderMode); - - /* Write to TIMx CCMR1 */ - LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); - - /* Write to TIMx CCER */ - LL_TIM_WriteReg(TIMx, CCER, tmpccer); - - return SUCCESS; -} - -/** - * @brief Set the fields of the TIMx Hall sensor interface configuration data - * structure to their default values. - * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (HALL sensor interface configuration data structure) - * @retval None - */ -void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct) -{ - /* Set the default configuration */ - TIM_HallSensorInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; - TIM_HallSensorInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; - TIM_HallSensorInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; - TIM_HallSensorInitStruct->CommutationDelay = 0U; -} - -/** - * @brief Configure the Hall sensor interface of the timer instance. - * @note TIMx CH1, CH2 and CH3 inputs connected through a XOR - * to the TI1 input channel - * @note TIMx slave mode controller is configured in reset mode. - Selected internal trigger is TI1F_ED. - * @note Channel 1 is configured as input, IC1 is mapped on TRC. - * @note Captured value stored in TIMx_CCR1 correspond to the time elapsed - * between 2 changes on the inputs. It gives information about motor speed. - * @note Channel 2 is configured in output PWM 2 mode. - * @note Compare value stored in TIMx_CCR2 corresponds to the commutation delay. - * @note OC2REF is selected as trigger output on TRGO. - * @note LL_TIM_IC_POLARITY_BOTHEDGE must not be used for TI1 when it is used - * when TIMx operates in Hall sensor interface mode. - * @param TIMx Timer Instance - * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (TIMx HALL sensor interface configuration data structure) - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx registers are de-initialized - * - ERROR: not applicable - */ -ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct) -{ - uint32_t tmpcr2 = 0U; - uint32_t tmpccmr1 = 0U; - uint32_t tmpccer = 0U; - uint32_t tmpsmcr = 0U; - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(TIMx)); - assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_HallSensorInitStruct->IC1Polarity)); - assert_param(IS_LL_TIM_ICPSC(TIM_HallSensorInitStruct->IC1Prescaler)); - assert_param(IS_LL_TIM_IC_FILTER(TIM_HallSensorInitStruct->IC1Filter)); - - /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ - TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); - - /* Get the TIMx CR2 register value */ - tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); - - /* Get the TIMx CCER register value */ - tmpccer = LL_TIM_ReadReg(TIMx, CCER); - - /* Get the TIMx SMCR register value */ - tmpsmcr = LL_TIM_ReadReg(TIMx, SMCR); - - /* Connect TIMx_CH1, CH2 and CH3 pins to the TI1 input */ - tmpcr2 |= TIM_CR2_TI1S; - - /* OC2REF signal is used as trigger output (TRGO) */ - tmpcr2 |= LL_TIM_TRGO_OC2REF; - - /* Configure the slave mode controller */ - tmpsmcr &= (uint32_t)~(TIM_SMCR_TS | TIM_SMCR_SMS); - tmpsmcr |= LL_TIM_TS_TI1F_ED; - tmpsmcr |= LL_TIM_SLAVEMODE_RESET; - - /* Configure input channel 1 */ - tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); - tmpccmr1 |= (uint32_t)(LL_TIM_ACTIVEINPUT_TRC >> 16U); - tmpccmr1 |= (uint32_t)(TIM_HallSensorInitStruct->IC1Filter >> 16U); - tmpccmr1 |= (uint32_t)(TIM_HallSensorInitStruct->IC1Prescaler >> 16U); - - /* Configure input channel 2 */ - tmpccmr1 &= (uint32_t)~(TIM_CCMR1_OC2M | TIM_CCMR1_OC2FE | TIM_CCMR1_OC2PE | TIM_CCMR1_OC2CE); - tmpccmr1 |= (uint32_t)(LL_TIM_OCMODE_PWM2 << 8U); - - /* Set Channel 1 polarity and enable Channel 1 and Channel2 */ - tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= (uint32_t)(TIM_HallSensorInitStruct->IC1Polarity); - tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); - - /* Write to TIMx CR2 */ - LL_TIM_WriteReg(TIMx, CR2, tmpcr2); - - /* Write to TIMx SMCR */ - LL_TIM_WriteReg(TIMx, SMCR, tmpsmcr); - - /* Write to TIMx CCMR1 */ - LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); - - /* Write to TIMx CCER */ - LL_TIM_WriteReg(TIMx, CCER, tmpccer); - - /* Write to TIMx CCR2 */ - LL_TIM_OC_SetCompareCH2(TIMx, TIM_HallSensorInitStruct->CommutationDelay); - - return SUCCESS; -} - -/** - * @brief Set the fields of the Break and Dead Time configuration data structure - * to their default values. - * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration data structure) - * @retval None - */ -void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) -{ - /* Set the default configuration */ - TIM_BDTRInitStruct->OSSRState = LL_TIM_OSSR_DISABLE; - TIM_BDTRInitStruct->OSSIState = LL_TIM_OSSI_DISABLE; - TIM_BDTRInitStruct->LockLevel = LL_TIM_LOCKLEVEL_OFF; - TIM_BDTRInitStruct->DeadTime = (uint8_t)0x00U; - TIM_BDTRInitStruct->BreakState = LL_TIM_BREAK_DISABLE; - TIM_BDTRInitStruct->BreakPolarity = LL_TIM_BREAK_POLARITY_LOW; - TIM_BDTRInitStruct->AutomaticOutput = LL_TIM_AUTOMATICOUTPUT_DISABLE; -} - -/** - * @brief Configure the Break and Dead Time feature of the timer instance. - * @note As the bits AOE, BKP, BKE, OSSR, OSSI and DTG[7:0] can be write-locked - * depending on the LOCK configuration, it can be necessary to configure all of - * them during the first write access to the TIMx_BDTR register. - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides a break input. - * @param TIMx Timer Instance - * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure(Break and Dead Time configuration data structure) - * @retval An ErrorStatus enumeration value: - * - SUCCESS: Break and Dead Time is initialized - * - ERROR: not applicable - */ -ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) -{ - uint32_t tmpbdtr = 0; - - /* Check the parameters */ - assert_param(IS_TIM_BREAK_INSTANCE(TIMx)); - assert_param(IS_LL_TIM_OSSR_STATE(TIM_BDTRInitStruct->OSSRState)); - assert_param(IS_LL_TIM_OSSI_STATE(TIM_BDTRInitStruct->OSSIState)); - assert_param(IS_LL_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->LockLevel)); - assert_param(IS_LL_TIM_BREAK_STATE(TIM_BDTRInitStruct->BreakState)); - assert_param(IS_LL_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->BreakPolarity)); - assert_param(IS_LL_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->AutomaticOutput)); - - /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, - the OSSI State, the dead time value and the Automatic Output Enable Bit */ - - /* Set the BDTR bits */ - MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, TIM_BDTRInitStruct->DeadTime); - MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, TIM_BDTRInitStruct->LockLevel); - MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, TIM_BDTRInitStruct->OSSIState); - MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, TIM_BDTRInitStruct->OSSRState); - MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, TIM_BDTRInitStruct->BreakState); - MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, TIM_BDTRInitStruct->BreakPolarity); - MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, TIM_BDTRInitStruct->AutomaticOutput); - MODIFY_REG(tmpbdtr, TIM_BDTR_MOE, TIM_BDTRInitStruct->AutomaticOutput); - - /* Set TIMx_BDTR */ - LL_TIM_WriteReg(TIMx, BDTR, tmpbdtr); - - return SUCCESS; -} -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup TIM_LL_Private_Functions TIM Private Functions - * @brief Private functions - * @{ - */ -/** - * @brief Configure the TIMx output channel 1. - * @param TIMx Timer Instance - * @param TIM_OCInitStruct pointer to the the TIMx output channel 1 configuration data structure - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx registers are de-initialized - * - ERROR: not applicable - */ -static ErrorStatus OC1Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) -{ - uint32_t tmpccmr1 = 0U; - uint32_t tmpccer = 0U; - uint32_t tmpcr2 = 0U; - - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(TIMx)); - assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); - assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); - assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); - assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); - assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); - - /* Disable the Channel 1: Reset the CC1E Bit */ - CLEAR_BIT(TIMx->CCER, TIM_CCER_CC1E); - - /* Get the TIMx CCER register value */ - tmpccer = LL_TIM_ReadReg(TIMx, CCER); - - /* Get the TIMx CR2 register value */ - tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); - - /* Reset Capture/Compare selection Bits */ - CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC1S); - - /* Set the Output Compare Mode */ - MODIFY_REG(tmpccmr1, TIM_CCMR1_OC1M, TIM_OCInitStruct->OCMode); - - /* Set the Output Compare Polarity */ - MODIFY_REG(tmpccer, TIM_CCER_CC1P, TIM_OCInitStruct->OCPolarity); - - /* Set the Output State */ - MODIFY_REG(tmpccer, TIM_CCER_CC1E, TIM_OCInitStruct->OCState); - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); - assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); - - /* Set the complementary output Polarity */ - MODIFY_REG(tmpccer, TIM_CCER_CC1NP, TIM_OCInitStruct->OCNPolarity << 2U); - - /* Set the complementary output State */ - MODIFY_REG(tmpccer, TIM_CCER_CC1NE, TIM_OCInitStruct->OCNState << 2U); - - /* Set the Output Idle state */ - MODIFY_REG(tmpcr2, TIM_CR2_OIS1, TIM_OCInitStruct->OCIdleState); - - /* Set the complementary output Idle state */ - MODIFY_REG(tmpcr2, TIM_CR2_OIS1N, TIM_OCInitStruct->OCNIdleState << 1U); - } - - /* Write to TIMx CR2 */ - LL_TIM_WriteReg(TIMx, CR2, tmpcr2); - - /* Write to TIMx CCMR1 */ - LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); - - /* Set the Capture Compare Register value */ - LL_TIM_OC_SetCompareCH1(TIMx, TIM_OCInitStruct->CompareValue); - - /* Write to TIMx CCER */ - LL_TIM_WriteReg(TIMx, CCER, tmpccer); - - return SUCCESS; -} - -/** - * @brief Configure the TIMx output channel 2. - * @param TIMx Timer Instance - * @param TIM_OCInitStruct pointer to the the TIMx output channel 2 configuration data structure - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx registers are de-initialized - * - ERROR: not applicable - */ -static ErrorStatus OC2Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) -{ - uint32_t tmpccmr1 = 0U; - uint32_t tmpccer = 0U; - uint32_t tmpcr2 = 0U; - - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(TIMx)); - assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); - assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); - assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); - assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); - assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); - - /* Disable the Channel 2: Reset the CC2E Bit */ - CLEAR_BIT(TIMx->CCER, TIM_CCER_CC2E); - - /* Get the TIMx CCER register value */ - tmpccer = LL_TIM_ReadReg(TIMx, CCER); - - /* Get the TIMx CR2 register value */ - tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); - - /* Reset Capture/Compare selection Bits */ - CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC2S); - - /* Select the Output Compare Mode */ - MODIFY_REG(tmpccmr1, TIM_CCMR1_OC2M, TIM_OCInitStruct->OCMode << 8U); - - /* Set the Output Compare Polarity */ - MODIFY_REG(tmpccer, TIM_CCER_CC2P, TIM_OCInitStruct->OCPolarity << 4U); - - /* Set the Output State */ - MODIFY_REG(tmpccer, TIM_CCER_CC2E, TIM_OCInitStruct->OCState << 4U); - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); - assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); - - /* Set the complementary output Polarity */ - MODIFY_REG(tmpccer, TIM_CCER_CC2NP, TIM_OCInitStruct->OCNPolarity << 6U); - - /* Set the complementary output State */ - MODIFY_REG(tmpccer, TIM_CCER_CC2NE, TIM_OCInitStruct->OCNState << 6U); - - /* Set the Output Idle state */ - MODIFY_REG(tmpcr2, TIM_CR2_OIS2, TIM_OCInitStruct->OCIdleState << 2U); - - /* Set the complementary output Idle state */ - MODIFY_REG(tmpcr2, TIM_CR2_OIS2N, TIM_OCInitStruct->OCNIdleState << 3U); - } - - /* Write to TIMx CR2 */ - LL_TIM_WriteReg(TIMx, CR2, tmpcr2); - - /* Write to TIMx CCMR1 */ - LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); - - /* Set the Capture Compare Register value */ - LL_TIM_OC_SetCompareCH2(TIMx, TIM_OCInitStruct->CompareValue); - - /* Write to TIMx CCER */ - LL_TIM_WriteReg(TIMx, CCER, tmpccer); - - return SUCCESS; -} - -/** - * @brief Configure the TIMx output channel 3. - * @param TIMx Timer Instance - * @param TIM_OCInitStruct pointer to the the TIMx output channel 3 configuration data structure - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx registers are de-initialized - * - ERROR: not applicable - */ -static ErrorStatus OC3Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) -{ - uint32_t tmpccmr2 = 0U; - uint32_t tmpccer = 0U; - uint32_t tmpcr2 = 0U; - - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(TIMx)); - assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); - assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); - assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); - assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); - assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); - - /* Disable the Channel 3: Reset the CC3E Bit */ - CLEAR_BIT(TIMx->CCER, TIM_CCER_CC3E); - - /* Get the TIMx CCER register value */ - tmpccer = LL_TIM_ReadReg(TIMx, CCER); - - /* Get the TIMx CR2 register value */ - tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); - - /* Get the TIMx CCMR2 register value */ - tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); - - /* Reset Capture/Compare selection Bits */ - CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC3S); - - /* Select the Output Compare Mode */ - MODIFY_REG(tmpccmr2, TIM_CCMR2_OC3M, TIM_OCInitStruct->OCMode); - - /* Set the Output Compare Polarity */ - MODIFY_REG(tmpccer, TIM_CCER_CC3P, TIM_OCInitStruct->OCPolarity << 8U); - - /* Set the Output State */ - MODIFY_REG(tmpccer, TIM_CCER_CC3E, TIM_OCInitStruct->OCState << 8U); - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); - assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); - - /* Set the complementary output Polarity */ - MODIFY_REG(tmpccer, TIM_CCER_CC3NP, TIM_OCInitStruct->OCNPolarity << 10U); - - /* Set the complementary output State */ - MODIFY_REG(tmpccer, TIM_CCER_CC3NE, TIM_OCInitStruct->OCNState << 10U); - - /* Set the Output Idle state */ - MODIFY_REG(tmpcr2, TIM_CR2_OIS3, TIM_OCInitStruct->OCIdleState << 4U); - - /* Set the complementary output Idle state */ - MODIFY_REG(tmpcr2, TIM_CR2_OIS3N, TIM_OCInitStruct->OCNIdleState << 5U); - } - - /* Write to TIMx CR2 */ - LL_TIM_WriteReg(TIMx, CR2, tmpcr2); - - /* Write to TIMx CCMR2 */ - LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); - - /* Set the Capture Compare Register value */ - LL_TIM_OC_SetCompareCH3(TIMx, TIM_OCInitStruct->CompareValue); - - /* Write to TIMx CCER */ - LL_TIM_WriteReg(TIMx, CCER, tmpccer); - - return SUCCESS; -} - -/** - * @brief Configure the TIMx output channel 4. - * @param TIMx Timer Instance - * @param TIM_OCInitStruct pointer to the the TIMx output channel 4 configuration data structure - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx registers are de-initialized - * - ERROR: not applicable - */ -static ErrorStatus OC4Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) -{ - uint32_t tmpccmr2 = 0U; - uint32_t tmpccer = 0U; - uint32_t tmpcr2 = 0U; - - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(TIMx)); - assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); - assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); - assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); - assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); - assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); - - /* Disable the Channel 4: Reset the CC4E Bit */ - CLEAR_BIT(TIMx->CCER, TIM_CCER_CC4E); - - /* Get the TIMx CCER register value */ - tmpccer = LL_TIM_ReadReg(TIMx, CCER); - - /* Get the TIMx CR2 register value */ - tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); - - /* Get the TIMx CCMR2 register value */ - tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); - - /* Reset Capture/Compare selection Bits */ - CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC4S); - - /* Select the Output Compare Mode */ - MODIFY_REG(tmpccmr2, TIM_CCMR2_OC4M, TIM_OCInitStruct->OCMode << 8U); - - /* Set the Output Compare Polarity */ - MODIFY_REG(tmpccer, TIM_CCER_CC4P, TIM_OCInitStruct->OCPolarity << 12U); - - /* Set the Output State */ - MODIFY_REG(tmpccer, TIM_CCER_CC4E, TIM_OCInitStruct->OCState << 12U); - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); - assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); - - /* Set the Output Idle state */ - MODIFY_REG(tmpcr2, TIM_CR2_OIS4, TIM_OCInitStruct->OCIdleState << 6U); - } - - /* Write to TIMx CR2 */ - LL_TIM_WriteReg(TIMx, CR2, tmpcr2); - - /* Write to TIMx CCMR2 */ - LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); - - /* Set the Capture Compare Register value */ - LL_TIM_OC_SetCompareCH4(TIMx, TIM_OCInitStruct->CompareValue); - - /* Write to TIMx CCER */ - LL_TIM_WriteReg(TIMx, CCER, tmpccer); - - return SUCCESS; -} - - -/** - * @brief Configure the TIMx input channel 1. - * @param TIMx Timer Instance - * @param TIM_ICInitStruct pointer to the the TIMx input channel 1 configuration data structure - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx registers are de-initialized - * - ERROR: not applicable - */ -static ErrorStatus IC1Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(TIMx)); - assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); - assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); - assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); - assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= (uint32_t)~TIM_CCER_CC1E; - - /* Select the Input and set the filter and the prescaler value */ - MODIFY_REG(TIMx->CCMR1, - (TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC), - (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); - - /* Select the Polarity and set the CC1E Bit */ - MODIFY_REG(TIMx->CCER, - (TIM_CCER_CC1P | TIM_CCER_CC1NP), - (TIM_ICInitStruct->ICPolarity | TIM_CCER_CC1E)); - - return SUCCESS; -} - -/** - * @brief Configure the TIMx input channel 2. - * @param TIMx Timer Instance - * @param TIM_ICInitStruct pointer to the the TIMx input channel 2 configuration data structure - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx registers are de-initialized - * - ERROR: not applicable - */ -static ErrorStatus IC2Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(TIMx)); - assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); - assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); - assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); - assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= (uint32_t)~TIM_CCER_CC2E; - - /* Select the Input and set the filter and the prescaler value */ - MODIFY_REG(TIMx->CCMR1, - (TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC), - (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); - - /* Select the Polarity and set the CC2E Bit */ - MODIFY_REG(TIMx->CCER, - (TIM_CCER_CC2P | TIM_CCER_CC2NP), - ((TIM_ICInitStruct->ICPolarity << 4U) | TIM_CCER_CC2E)); - - return SUCCESS; -} - -/** - * @brief Configure the TIMx input channel 3. - * @param TIMx Timer Instance - * @param TIM_ICInitStruct pointer to the the TIMx input channel 3 configuration data structure - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx registers are de-initialized - * - ERROR: not applicable - */ -static ErrorStatus IC3Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(TIMx)); - assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); - assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); - assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); - assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); - - /* Disable the Channel 3: Reset the CC3E Bit */ - TIMx->CCER &= (uint32_t)~TIM_CCER_CC3E; - - /* Select the Input and set the filter and the prescaler value */ - MODIFY_REG(TIMx->CCMR2, - (TIM_CCMR2_CC3S | TIM_CCMR2_IC3F | TIM_CCMR2_IC3PSC), - (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); - - /* Select the Polarity and set the CC3E Bit */ - MODIFY_REG(TIMx->CCER, - (TIM_CCER_CC3P | TIM_CCER_CC3NP), - ((TIM_ICInitStruct->ICPolarity << 8U) | TIM_CCER_CC3E)); - - return SUCCESS; -} - -/** - * @brief Configure the TIMx input channel 4. - * @param TIMx Timer Instance - * @param TIM_ICInitStruct pointer to the the TIMx input channel 4 configuration data structure - * @retval An ErrorStatus enumeration value: - * - SUCCESS: TIMx registers are de-initialized - * - ERROR: not applicable - */ -static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(TIMx)); - assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); - assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); - assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); - assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= (uint32_t)~TIM_CCER_CC4E; - - /* Select the Input and set the filter and the prescaler value */ - MODIFY_REG(TIMx->CCMR2, - (TIM_CCMR2_CC4S | TIM_CCMR2_IC4F | TIM_CCMR2_IC4PSC), - (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); - - /* Select the Polarity and set the CC2E Bit */ - MODIFY_REG(TIMx->CCER, - (TIM_CCER_CC4P | TIM_CCER_CC4NP), - ((TIM_ICInitStruct->ICPolarity << 12U) | TIM_CCER_CC4E)); - - return SUCCESS; -} - - -/** - * @} - */ - -/** - * @} - */ - -#endif /* TIM1 || TIM2 || TIM3 || TIM14 || TIM15 || TIM16 || TIM17 || TIM6 || TIM7 */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_usart.c b/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_usart.c deleted file mode 100644 index d671b29..0000000 --- a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_usart.c +++ /dev/null @@ -1,529 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_usart.c - * @author MCD Application Team - * @brief USART LL module driver. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_ll_usart.h" -#include "stm32f0xx_ll_rcc.h" -#include "stm32f0xx_ll_bus.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -#if defined (USART1) || defined (USART2) || defined (USART3) || defined (USART4) || defined (USART5) || defined (USART6) || defined (USART7) || defined (USART8) - -/** @addtogroup USART_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @addtogroup USART_LL_Private_Constants - * @{ - */ - -/** - * @} - */ - - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup USART_LL_Private_Macros - * @{ - */ - -/* __BAUDRATE__ The maximum Baud Rate is derived from the maximum clock available - * divided by the smallest oversampling used on the USART (i.e. 8) */ -#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 6000000U) - -/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */ -#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U) - -/* __VALUE__ BRR content must be lower than or equal to 0xFFFF. */ -#define IS_LL_USART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) - -#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \ - || ((__VALUE__) == LL_USART_DIRECTION_RX) \ - || ((__VALUE__) == LL_USART_DIRECTION_TX) \ - || ((__VALUE__) == LL_USART_DIRECTION_TX_RX)) - -#define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \ - || ((__VALUE__) == LL_USART_PARITY_EVEN) \ - || ((__VALUE__) == LL_USART_PARITY_ODD)) - -#if defined(USART_7BITS_SUPPORT) -#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_7B) \ - || ((__VALUE__) == LL_USART_DATAWIDTH_8B) \ - || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) -#else -#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_8B) \ - || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) -#endif - -#define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \ - || ((__VALUE__) == LL_USART_OVERSAMPLING_8)) - -#define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \ - || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT)) - -#define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \ - || ((__VALUE__) == LL_USART_PHASE_2EDGE)) - -#define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \ - || ((__VALUE__) == LL_USART_POLARITY_HIGH)) - -#define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \ - || ((__VALUE__) == LL_USART_CLOCK_ENABLE)) - -#if defined(USART_SMARTCARD_SUPPORT) -#define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \ - || ((__VALUE__) == LL_USART_STOPBITS_1) \ - || ((__VALUE__) == LL_USART_STOPBITS_1_5) \ - || ((__VALUE__) == LL_USART_STOPBITS_2)) -#else -#define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_1) \ - || ((__VALUE__) == LL_USART_STOPBITS_2)) -#endif - -#define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \ - || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \ - || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \ - || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS)) - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup USART_LL_Exported_Functions - * @{ - */ - -/** @addtogroup USART_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize USART registers (Registers restored to their default values). - * @param USARTx USART Instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: USART registers are de-initialized - * - ERROR: USART registers are not de-initialized - */ -ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx) -{ - ErrorStatus status = SUCCESS; - - /* Check the parameters */ - assert_param(IS_UART_INSTANCE(USARTx)); - - if (USARTx == USART1) - { - /* Force reset of USART clock */ - LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_USART1); - - /* Release reset of USART clock */ - LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_USART1); - } -#if defined(USART2) - else if (USARTx == USART2) - { - /* Force reset of USART clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART2); - - /* Release reset of USART clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART2); - } -#endif /* USART2 */ -#if defined(USART3) - else if (USARTx == USART3) - { - /* Force reset of USART clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART3); - - /* Release reset of USART clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART3); - } -#endif /* USART3 */ -#if defined(USART4) - else if (USARTx == USART4) - { - /* Force reset of USART clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART4); - - /* Release reset of USART clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART4); - } -#endif /* USART4 */ -#if defined(USART5) - else if (USARTx == USART5) - { - /* Force reset of USART clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART5); - - /* Release reset of USART clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART5); - } -#endif /* USART5 */ -#if defined(USART6) - else if (USARTx == USART6) - { - /* Force reset of USART clock */ - LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_USART6); - - /* Release reset of USART clock */ - LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_USART6); - } -#endif /* USART6 */ -#if defined(USART7) - else if (USARTx == USART7) - { - /* Force reset of USART clock */ - LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_USART7); - - /* Release reset of USART clock */ - LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_USART7); - } -#endif /* USART7 */ -#if defined(USART8) - else if (USARTx == USART8) - { - /* Force reset of USART clock */ - LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_USART8); - - /* Release reset of USART clock */ - LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_USART8); - } -#endif /* USART8 */ - else - { - status = ERROR; - } - - return (status); -} - -/** - * @brief Initialize USART registers according to the specified - * parameters in USART_InitStruct. - * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0), - * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. - * @note Baud rate value stored in USART_InitStruct BaudRate field, should be valid (different from 0). - * @param USARTx USART Instance - * @param USART_InitStruct pointer to a LL_USART_InitTypeDef structure - * that contains the configuration information for the specified USART peripheral. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: USART registers are initialized according to USART_InitStruct content - * - ERROR: Problem occurred during USART Registers initialization - */ -ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct) -{ - ErrorStatus status = ERROR; - uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO; -#if defined(STM32F030x8) || defined(STM32F030xC) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F051x8) || defined(STM32F058xx) || defined(STM32F070x6) || defined(STM32F070xB) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) - LL_RCC_ClocksTypeDef RCC_Clocks; -#endif - - /* Check the parameters */ - assert_param(IS_UART_INSTANCE(USARTx)); - assert_param(IS_LL_USART_BAUDRATE(USART_InitStruct->BaudRate)); - assert_param(IS_LL_USART_DATAWIDTH(USART_InitStruct->DataWidth)); - assert_param(IS_LL_USART_STOPBITS(USART_InitStruct->StopBits)); - assert_param(IS_LL_USART_PARITY(USART_InitStruct->Parity)); - assert_param(IS_LL_USART_DIRECTION(USART_InitStruct->TransferDirection)); - assert_param(IS_LL_USART_HWCONTROL(USART_InitStruct->HardwareFlowControl)); - assert_param(IS_LL_USART_OVERSAMPLING(USART_InitStruct->OverSampling)); - - /* USART needs to be in disabled state, in order to be able to configure some bits in - CRx registers */ - if (LL_USART_IsEnabled(USARTx) == 0U) - { - /*---------------------------- USART CR1 Configuration --------------------- - * Configure USARTx CR1 (USART Word Length, Parity, Mode and Oversampling bits) with parameters: - * - DataWidth: USART_CR1_M bits according to USART_InitStruct->DataWidth value - * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to USART_InitStruct->Parity value - * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to USART_InitStruct->TransferDirection value - * - Oversampling: USART_CR1_OVER8 bit according to USART_InitStruct->OverSampling value. - */ - MODIFY_REG(USARTx->CR1, - (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | - USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), - (USART_InitStruct->DataWidth | USART_InitStruct->Parity | - USART_InitStruct->TransferDirection | USART_InitStruct->OverSampling)); - - /*---------------------------- USART CR2 Configuration --------------------- - * Configure USARTx CR2 (Stop bits) with parameters: - * - Stop Bits: USART_CR2_STOP bits according to USART_InitStruct->StopBits value. - * - CLKEN, CPOL, CPHA and LBCL bits are to be configured using LL_USART_ClockInit(). - */ - LL_USART_SetStopBitsLength(USARTx, USART_InitStruct->StopBits); - - /*---------------------------- USART CR3 Configuration --------------------- - * Configure USARTx CR3 (Hardware Flow Control) with parameters: - * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to USART_InitStruct->HardwareFlowControl value. - */ - LL_USART_SetHWFlowCtrl(USARTx, USART_InitStruct->HardwareFlowControl); - - /*---------------------------- USART BRR Configuration --------------------- - * Retrieve Clock frequency used for USART Peripheral - */ - if (USARTx == USART1) - { - periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART1_CLKSOURCE); - } -#if defined(USART2) - else if (USARTx == USART2) - { -#if defined (RCC_CFGR3_USART2SW) - periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART2_CLKSOURCE); -#else - /* USART2 clock is PCLK */ - LL_RCC_GetSystemClocksFreq(&RCC_Clocks); - periphclk = RCC_Clocks.PCLK1_Frequency; -#endif - } -#endif /* USART2 */ -#if defined(USART3) - else if (USARTx == USART3) - { -#if defined (RCC_CFGR3_USART3SW) - periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART3_CLKSOURCE); -#else - /* USART3 clock is PCLK */ - LL_RCC_GetSystemClocksFreq(&RCC_Clocks); - periphclk = RCC_Clocks.PCLK1_Frequency; -#endif - } -#endif /* USART3 */ -#if defined(USART4) - else if (USARTx == USART4) - { - /* USART4 clock is PCLK */ - LL_RCC_GetSystemClocksFreq(&RCC_Clocks); - periphclk = RCC_Clocks.PCLK1_Frequency; - } -#endif /* USART4 */ -#if defined(USART5) - else if (USARTx == USART5) - { - /* USART5 clock is PCLK */ - LL_RCC_GetSystemClocksFreq(&RCC_Clocks); - periphclk = RCC_Clocks.PCLK1_Frequency; - } -#endif /* USART5 */ -#if defined(USART6) - else if (USARTx == USART6) - { - /* USART6 clock is PCLK */ - LL_RCC_GetSystemClocksFreq(&RCC_Clocks); - periphclk = RCC_Clocks.PCLK1_Frequency; - } -#endif /* USART6 */ -#if defined(USART7) - else if (USARTx == USART7) - { - /* USART7 clock is PCLK */ - LL_RCC_GetSystemClocksFreq(&RCC_Clocks); - periphclk = RCC_Clocks.PCLK1_Frequency; - } -#endif /* USART7 */ -#if defined(USART8) - else if (USARTx == USART8) - { - /* USART8 clock is PCLK */ - LL_RCC_GetSystemClocksFreq(&RCC_Clocks); - periphclk = RCC_Clocks.PCLK1_Frequency; - } -#endif /* USART8 */ - else - { - /* Nothing to do, as error code is already assigned to ERROR value */ - } - - /* Configure the USART Baud Rate : - - valid baud rate value (different from 0) is required - - Peripheral clock as returned by RCC service, should be valid (different from 0). - */ - if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO) - && (USART_InitStruct->BaudRate != 0U)) - { - status = SUCCESS; - LL_USART_SetBaudRate(USARTx, - periphclk, - USART_InitStruct->OverSampling, - USART_InitStruct->BaudRate); - - /* Check BRR is greater than or equal to 16d */ - assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR)); - - /* Check BRR is greater than or equal to 16d */ - assert_param(IS_LL_USART_BRR_MAX(USARTx->BRR)); - } - } - /* Endif (=> USART not in Disabled state => return ERROR) */ - - return (status); -} - -/** - * @brief Set each @ref LL_USART_InitTypeDef field to default value. - * @param USART_InitStruct pointer to a @ref LL_USART_InitTypeDef structure - * whose fields will be set to default values. - * @retval None - */ - -void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct) -{ - /* Set USART_InitStruct fields to default values */ - USART_InitStruct->BaudRate = 9600U; - USART_InitStruct->DataWidth = LL_USART_DATAWIDTH_8B; - USART_InitStruct->StopBits = LL_USART_STOPBITS_1; - USART_InitStruct->Parity = LL_USART_PARITY_NONE ; - USART_InitStruct->TransferDirection = LL_USART_DIRECTION_TX_RX; - USART_InitStruct->HardwareFlowControl = LL_USART_HWCONTROL_NONE; - USART_InitStruct->OverSampling = LL_USART_OVERSAMPLING_16; -} - -/** - * @brief Initialize USART Clock related settings according to the - * specified parameters in the USART_ClockInitStruct. - * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0), - * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. - * @param USARTx USART Instance - * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure - * that contains the Clock configuration information for the specified USART peripheral. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: USART registers related to Clock settings are initialized according to USART_ClockInitStruct content - * - ERROR: Problem occurred during USART Registers initialization - */ -ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct) -{ - ErrorStatus status = SUCCESS; - - /* Check USART Instance and Clock signal output parameters */ - assert_param(IS_UART_INSTANCE(USARTx)); - assert_param(IS_LL_USART_CLOCKOUTPUT(USART_ClockInitStruct->ClockOutput)); - - /* USART needs to be in disabled state, in order to be able to configure some bits in - CRx registers */ - if (LL_USART_IsEnabled(USARTx) == 0U) - { - /*---------------------------- USART CR2 Configuration -----------------------*/ - /* If Clock signal has to be output */ - if (USART_ClockInitStruct->ClockOutput == LL_USART_CLOCK_DISABLE) - { - /* Deactivate Clock signal delivery : - * - Disable Clock Output: USART_CR2_CLKEN cleared - */ - LL_USART_DisableSCLKOutput(USARTx); - } - else - { - /* Ensure USART instance is USART capable */ - assert_param(IS_USART_INSTANCE(USARTx)); - - /* Check clock related parameters */ - assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity)); - assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase)); - assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse)); - - /*---------------------------- USART CR2 Configuration ----------------------- - * Configure USARTx CR2 (Clock signal related bits) with parameters: - * - Enable Clock Output: USART_CR2_CLKEN set - * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value - * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value - * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value. - */ - MODIFY_REG(USARTx->CR2, - USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, - USART_CR2_CLKEN | USART_ClockInitStruct->ClockPolarity | - USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse); - } - } - /* Else (USART not in Disabled state => return ERROR */ - else - { - status = ERROR; - } - - return (status); -} - -/** - * @brief Set each field of a @ref LL_USART_ClockInitTypeDef type structure to default value. - * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure - * whose fields will be set to default values. - * @retval None - */ -void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct) -{ - /* Set LL_USART_ClockInitStruct fields with default values */ - USART_ClockInitStruct->ClockOutput = LL_USART_CLOCK_DISABLE; - USART_ClockInitStruct->ClockPolarity = LL_USART_POLARITY_LOW; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ - USART_ClockInitStruct->ClockPhase = LL_USART_PHASE_1EDGE; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ - USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* USART1 || USART2|| USART3 || USART4 || USART5 || USART6 || USART7 || USART8 */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_utils.c b/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_utils.c deleted file mode 100644 index 836204a..0000000 --- a/firmware/S42BV1.0/Close_loop/src/Libraries/Stm32F0_lib/Src/stm32f0xx_ll_utils.c +++ /dev/null @@ -1,620 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_utils.c - * @author MCD Application Team - * @brief UTILS LL module driver. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_ll_rcc.h" -#include "stm32f0xx_ll_utils.h" -#include "stm32f0xx_ll_system.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -/** @addtogroup UTILS_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @addtogroup UTILS_LL_Private_Constants - * @{ - */ - -/* Defines used for PLL range */ -#define UTILS_PLL_OUTPUT_MIN 16000000U /*!< Frequency min for PLL output, in Hz */ -#define UTILS_PLL_OUTPUT_MAX 48000000U /*!< Frequency max for PLL output, in Hz */ - -/* Defines used for HSE range */ -#define UTILS_HSE_FREQUENCY_MIN 4000000U /*!< Frequency min for HSE frequency, in Hz */ -#define UTILS_HSE_FREQUENCY_MAX 32000000U /*!< Frequency max for HSE frequency, in Hz */ - -/* Defines used for FLASH latency according to SYSCLK Frequency */ -#define UTILS_LATENCY1_FREQ 24000000U /*!< SYSCLK frequency to set FLASH latency 1 */ -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup UTILS_LL_Private_Macros - * @{ - */ -#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \ - || ((__VALUE__) == LL_RCC_SYSCLK_DIV_512)) - -#define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \ - || ((__VALUE__) == LL_RCC_APB1_DIV_2) \ - || ((__VALUE__) == LL_RCC_APB1_DIV_4) \ - || ((__VALUE__) == LL_RCC_APB1_DIV_8) \ - || ((__VALUE__) == LL_RCC_APB1_DIV_16)) - -#define IS_LL_UTILS_PLLMUL_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLL_MUL_2) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_3) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_4) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_5) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_6) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_7) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_8) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_9) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_10) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_11) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_12) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_13) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_14) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_15) \ - || ((__VALUE__) == LL_RCC_PLL_MUL_16)) - -#define IS_LL_UTILS_PREDIV_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PREDIV_DIV_1) || ((__VALUE__) == LL_RCC_PREDIV_DIV_2) || \ - ((__VALUE__) == LL_RCC_PREDIV_DIV_3) || ((__VALUE__) == LL_RCC_PREDIV_DIV_4) || \ - ((__VALUE__) == LL_RCC_PREDIV_DIV_5) || ((__VALUE__) == LL_RCC_PREDIV_DIV_6) || \ - ((__VALUE__) == LL_RCC_PREDIV_DIV_7) || ((__VALUE__) == LL_RCC_PREDIV_DIV_8) || \ - ((__VALUE__) == LL_RCC_PREDIV_DIV_9) || ((__VALUE__) == LL_RCC_PREDIV_DIV_10) || \ - ((__VALUE__) == LL_RCC_PREDIV_DIV_11) || ((__VALUE__) == LL_RCC_PREDIV_DIV_12) || \ - ((__VALUE__) == LL_RCC_PREDIV_DIV_13) || ((__VALUE__) == LL_RCC_PREDIV_DIV_14) || \ - ((__VALUE__) == LL_RCC_PREDIV_DIV_15) || ((__VALUE__) == LL_RCC_PREDIV_DIV_16)) - -#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((UTILS_PLL_OUTPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLL_OUTPUT_MAX)) - - -#define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \ - || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF)) - -#define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN) && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX)) -/** - * @} - */ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup UTILS_LL_Private_Functions UTILS Private functions - * @{ - */ -static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, - LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct); -#if defined(FLASH_ACR_LATENCY) -static ErrorStatus UTILS_SetFlashLatency(uint32_t Frequency); -#endif /* FLASH_ACR_LATENCY */ -static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); -static ErrorStatus UTILS_PLL_IsBusy(void); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup UTILS_LL_Exported_Functions - * @{ - */ - -/** @addtogroup UTILS_LL_EF_DELAY - * @{ - */ - -/** - * @brief This function configures the Cortex-M SysTick source to have 1ms time base. - * @note When a RTOS is used, it is recommended to avoid changing the Systick - * configuration by calling this function, for a delay use rather osDelay RTOS service. - * @param HCLKFrequency HCLK frequency in Hz - * @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq - * @retval None - */ -void LL_Init1msTick(uint32_t HCLKFrequency) -{ - /* Use frequency provided in argument */ - LL_InitTick(HCLKFrequency, 1000U); -} - -/** - * @brief This function provides accurate delay (in milliseconds) based - * on SysTick counter flag - * @note When a RTOS is used, it is recommended to avoid using blocking delay - * and use rather osDelay service. - * @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which - * will configure Systick to 1ms - * @param Delay specifies the delay time length, in milliseconds. - * @retval None - */ -void LL_mDelay(uint32_t Delay) -{ - __IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */ - /* Add this code to indicate that local variable is not used */ - ((void)tmp); - - /* Add a period to guaranty minimum wait */ - if (Delay < LL_MAX_DELAY) - { - Delay++; - } - - while (Delay) - { - if ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U) - { - Delay--; - } - } -} - -/** - * @} - */ - -/** @addtogroup UTILS_EF_SYSTEM - * @brief System Configuration functions - * - @verbatim - =============================================================================== - ##### System Configuration functions ##### - =============================================================================== - [..] - System, AHB and APB buses clocks configuration - - (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is 48000000 Hz. - @endverbatim - @internal - Depending on the SYSCLK frequency, the flash latency should be adapted accordingly: - (++) +-----------------------------------------------+ - (++) | Latency | SYSCLK clock frequency (MHz) | - (++) |---------------|-------------------------------| - (++) |0WS(1CPU cycle)| 0 < SYSCLK <= 24 | - (++) |---------------|-------------------------------| - (++) |1WS(2CPU cycle)| 24 < SYSCLK <= 48 | - (++) +-----------------------------------------------+ - @endinternal - * @{ - */ - -/** - * @brief This function sets directly SystemCoreClock CMSIS variable. - * @note Variable can be calculated also through SystemCoreClockUpdate function. - * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) - * @retval None - */ -void LL_SetSystemCoreClock(uint32_t HCLKFrequency) -{ - /* HCLK clock frequency */ - SystemCoreClock = HCLKFrequency; -} - -/** - * @brief This function configures system clock with HSI as clock source of the PLL - * @note The application need to ensure that PLL is disabled. - * @note Function is based on the following formula: - * - PLL output frequency = ((HSI frequency / PREDIV) * PLLMUL) - * - PREDIV: Set to 2 for few devices - * - PLLMUL: The application software must set correctly the PLL multiplication factor to - * be in the range 16-48MHz - * @note FLASH latency can be modified through this function. - * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains - * the configuration information for the PLL. - * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains - * the configuration information for the BUS prescalers. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: Max frequency configuration done - * - ERROR: Max frequency configuration not done - */ -ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, - LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) -{ - ErrorStatus status = SUCCESS; - uint32_t pllfreq = 0U; - - /* Check if one of the PLL is enabled */ - if (UTILS_PLL_IsBusy() == SUCCESS) - { -#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) - /* Check PREDIV value */ - assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->PLLDiv)); -#else - /* Force PREDIV value to 2 */ - UTILS_PLLInitStruct->Prediv = LL_RCC_PREDIV_DIV_2; -#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/ - /* Calculate the new PLL output frequency */ - pllfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct); - - /* Enable HSI if not enabled */ - if (LL_RCC_HSI_IsReady() != 1U) - { - LL_RCC_HSI_Enable(); - while (LL_RCC_HSI_IsReady() != 1U) - { - /* Wait for HSI ready */ - } - } - - /* Configure PLL */ -#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) - LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv); -#else - LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI_DIV_2, UTILS_PLLInitStruct->PLLMul); -#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/ - - /* Enable PLL and switch system clock to PLL */ - status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); - } - else - { - /* Current PLL configuration cannot be modified */ - status = ERROR; - } - - return status; -} - -#if defined(RCC_CFGR_SW_HSI48) -/** - * @brief This function configures system clock with HSI48 as clock source of the PLL - * @note The application need to ensure that PLL is disabled. - * @note Function is based on the following formula: - * - PLL output frequency = ((HSI48 frequency / PREDIV) * PLLMUL) - * - PLLMUL: The application software must set correctly the PLL multiplication factor to - * be in the range 16-48MHz - * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains - * the configuration information for the PLL. - * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains - * the configuration information for the BUS prescalers. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: Max frequency configuration done - * - ERROR: Max frequency configuration not done - */ -ErrorStatus LL_PLL_ConfigSystemClock_HSI48(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, - LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) -{ - ErrorStatus status = SUCCESS; - uint32_t pllfreq = 0U; - - /* Check if one of the PLL is enabled */ - if (UTILS_PLL_IsBusy() == SUCCESS) - { - /* Check PREDIV value */ - assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->PLLDiv)); - - /* Calculate the new PLL output frequency */ - pllfreq = UTILS_GetPLLOutputFrequency(HSI48_VALUE, UTILS_PLLInitStruct); - - /* Enable HSI48 if not enabled */ - if (LL_RCC_HSI48_IsReady() != 1U) - { - LL_RCC_HSI48_Enable(); - while (LL_RCC_HSI48_IsReady() != 1U) - { - /* Wait for HSI48 ready */ - } - } - - /* Configure PLL */ - LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI48, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv); - - /* Enable PLL and switch system clock to PLL */ - status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); - } - else - { - /* Current PLL configuration cannot be modified */ - status = ERROR; - } - - return status; -} - -#endif /*RCC_CFGR_SW_HSI48*/ -/** - * @brief This function configures system clock with HSE as clock source of the PLL - * @note The application need to ensure that PLL is disabled. - * @note Function is based on the following formula: - * - PLL output frequency = ((HSE frequency / PREDIV) * PLLMUL) - * - PLLMUL: The application software must set correctly the PLL multiplication factor to - * be in the range 16-48MHz - * @note FLASH latency can be modified through this function. - * @param HSEFrequency Value between Min_Data = 4000000 and Max_Data = 32000000 - * @param HSEBypass This parameter can be one of the following values: - * @arg @ref LL_UTILS_HSEBYPASS_ON - * @arg @ref LL_UTILS_HSEBYPASS_OFF - * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains - * the configuration information for the PLL. - * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains - * the configuration information for the BUS prescalers. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: Max frequency configuration done - * - ERROR: Max frequency configuration not done - */ -ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, - LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) -{ - ErrorStatus status = SUCCESS; - uint32_t pllfreq = 0U; - - /* Check the parameters */ - assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency)); - assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass)); - - /* Check if one of the PLL is enabled */ - if (UTILS_PLL_IsBusy() == SUCCESS) - { - /* Check PREDIV value */ -#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) - assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->PLLDiv)); -#else - assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->Prediv)); -#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/ - - /* Calculate the new PLL output frequency */ - pllfreq = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct); - - /* Enable HSE if not enabled */ - if (LL_RCC_HSE_IsReady() != 1U) - { - /* Check if need to enable HSE bypass feature or not */ - if (HSEBypass == LL_UTILS_HSEBYPASS_ON) - { - LL_RCC_HSE_EnableBypass(); - } - else - { - LL_RCC_HSE_DisableBypass(); - } - - /* Enable HSE */ - LL_RCC_HSE_Enable(); - while (LL_RCC_HSE_IsReady() != 1U) - { - /* Wait for HSE ready */ - } - } - - /* Configure PLL */ -#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) - LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv); -#else - LL_RCC_PLL_ConfigDomain_SYS((RCC_CFGR_PLLSRC_HSE_PREDIV | UTILS_PLLInitStruct->Prediv), UTILS_PLLInitStruct->PLLMul); -#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/ - - /* Enable PLL and switch system clock to PLL */ - status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); - } - else - { - /* Current PLL configuration cannot be modified */ - status = ERROR; - } - - return status; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup UTILS_LL_Private_Functions - * @{ - */ -/** - * @brief Update number of Flash wait states in line with new frequency and current - voltage range. - * @param Frequency SYSCLK frequency - * @retval An ErrorStatus enumeration value: - * - SUCCESS: Latency has been modified - * - ERROR: Latency cannot be modified - */ -#if defined(FLASH_ACR_LATENCY) -static ErrorStatus UTILS_SetFlashLatency(uint32_t Frequency) -{ - ErrorStatus status = SUCCESS; - - uint32_t latency = LL_FLASH_LATENCY_0; /* default value 0WS */ - - /* Frequency cannot be equal to 0 */ - if (Frequency == 0U) - { - status = ERROR; - } - else - { - if (Frequency > UTILS_LATENCY1_FREQ) - { - /* 24 < SYSCLK <= 48 => 1WS (2 CPU cycles) */ - latency = LL_FLASH_LATENCY_1; - } - /* else SYSCLK < 24MHz default LL_FLASH_LATENCY_0 0WS */ - - LL_FLASH_SetLatency(latency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if (LL_FLASH_GetLatency() != latency) - { - status = ERROR; - } - } - return status; -} -#endif /* FLASH_ACR_LATENCY */ - -/** - * @brief Function to check that PLL can be modified - * @param PLL_InputFrequency PLL input frequency (in Hz) - * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains - * the configuration information for the PLL. - * @retval PLL output frequency (in Hz) - */ -static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct) -{ - uint32_t pllfreq = 0U; - - /* Check the parameters */ - assert_param(IS_LL_UTILS_PLLMUL_VALUE(UTILS_PLLInitStruct->PLLMul)); - - /* Check different PLL parameters according to RM */ - /* The application software must set correctly the PLL multiplication factor to - be in the range 16-48MHz */ -#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) - pllfreq = __LL_RCC_CALC_PLLCLK_FREQ(PLL_InputFrequency, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv); -#else - pllfreq = __LL_RCC_CALC_PLLCLK_FREQ(PLL_InputFrequency / (UTILS_PLLInitStruct->Prediv + 1U), UTILS_PLLInitStruct->PLLMul); -#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/ - assert_param(IS_LL_UTILS_PLL_FREQUENCY(pllfreq)); - - return pllfreq; -} - -/** - * @brief Function to check that PLL can be modified - * @retval An ErrorStatus enumeration value: - * - SUCCESS: PLL modification can be done - * - ERROR: PLL is busy - */ -static ErrorStatus UTILS_PLL_IsBusy(void) -{ - ErrorStatus status = SUCCESS; - - /* Check if PLL is busy*/ - if (LL_RCC_PLL_IsReady() != 0U) - { - /* PLL configuration cannot be modified */ - status = ERROR; - } - - return status; -} - -/** - * @brief Function to enable PLL and switch system clock to PLL - * @param SYSCLK_Frequency SYSCLK frequency - * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains - * the configuration information for the BUS prescalers. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: No problem to switch system to PLL - * - ERROR: Problem to switch system to PLL - */ -static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) -{ - ErrorStatus status = SUCCESS; - uint32_t sysclk_frequency_current = 0U; - - assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->AHBCLKDivider)); - assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider)); - - /* Calculate current SYSCLK frequency */ - sysclk_frequency_current = (SystemCoreClock << AHBPrescTable[LL_RCC_GetAHBPrescaler() >> RCC_POSITION_HPRE]); - - /* Increasing the number of wait states because of higher CPU frequency */ - if (sysclk_frequency_current < SYSCLK_Frequency) - { - /* Set FLASH latency to highest latency */ - status = UTILS_SetFlashLatency(SYSCLK_Frequency); - } - - /* Update system clock configuration */ - if (status == SUCCESS) - { - /* Enable PLL */ - LL_RCC_PLL_Enable(); - while (LL_RCC_PLL_IsReady() != 1U) - { - /* Wait for PLL ready */ - } - - /* Sysclk activation on the main PLL */ - LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider); - LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL); - while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) - { - /* Wait for system clock switch to PLL */ - } - - /* Set APB1 & APB2 prescaler*/ - LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider); - } - - /* Decreasing the number of wait states because of lower CPU frequency */ - if (sysclk_frequency_current > SYSCLK_Frequency) - { - /* Set FLASH latency to lowest latency */ - status = UTILS_SetFlashLatency(SYSCLK_Frequency); - } - - /* Update SystemCoreClock variable */ - if (status == SUCCESS) - { - LL_SetSystemCoreClock(__LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->AHBCLKDivider)); - } - - return status; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/firmware/S42BV1.0/Close_loop/src/Libraries/cmsis/core_cmFunc.h b/firmware/S42BV1.0/Close_loop/src/Libraries/cmsis/core_cmFunc.h new file mode 100644 index 0000000..652a48a --- /dev/null +++ b/firmware/S42BV1.0/Close_loop/src/Libraries/cmsis/core_cmFunc.h @@ -0,0 +1,87 @@ +/**************************************************************************//** + * @file core_cmFunc.h + * @brief CMSIS Cortex-M Core Function Access Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CMFUNC_H +#define __CORE_CMFUNC_H + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ +*/ + +/*------------------ RealView Compiler -----------------*/ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + +/*------------------ ARM Compiler V6 -------------------*/ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #include "cmsis_armcc_V6.h" + +/*------------------ GNU Compiler ----------------------*/ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + +/*------------------ ICC Compiler ----------------------*/ +#elif defined ( __ICCARM__ ) + #include + +/*------------------ TI CCS Compiler -------------------*/ +#elif defined ( __TMS470__ ) + #include + +/*------------------ TASKING Compiler ------------------*/ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + +/*------------------ COSMIC Compiler -------------------*/ +#elif defined ( __CSMC__ ) + #include + +#endif + +/*@} end of CMSIS_Core_RegAccFunctions */ + +#endif /* __CORE_CMFUNC_H */ diff --git a/firmware/S42BV1.0/Close_loop/src/Libraries/cmsis/core_cmInstr.h b/firmware/S42BV1.0/Close_loop/src/Libraries/cmsis/core_cmInstr.h new file mode 100644 index 0000000..f474b0e --- /dev/null +++ b/firmware/S42BV1.0/Close_loop/src/Libraries/cmsis/core_cmInstr.h @@ -0,0 +1,87 @@ +/**************************************************************************//** + * @file core_cmInstr.h + * @brief CMSIS Cortex-M Core Instruction Access Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CMINSTR_H +#define __CORE_CMINSTR_H + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/*------------------ RealView Compiler -----------------*/ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + +/*------------------ ARM Compiler V6 -------------------*/ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #include "cmsis_armcc_V6.h" + +/*------------------ GNU Compiler ----------------------*/ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + +/*------------------ ICC Compiler ----------------------*/ +#elif defined ( __ICCARM__ ) + #include + +/*------------------ TI CCS Compiler -------------------*/ +#elif defined ( __TMS470__ ) + #include + +/*------------------ TASKING Compiler ------------------*/ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + +/*------------------ COSMIC Compiler -------------------*/ +#elif defined ( __CSMC__ ) + #include + +#endif + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + +#endif /* __CORE_CMINSTR_H */ diff --git a/firmware/S42BV1.0/buildroot/boards/STM32F030C8.json b/firmware/S42BV1.0/buildroot/boards/STM32F030C8.json index ae4fd63..43ec2a9 100644 --- a/firmware/S42BV1.0/buildroot/boards/STM32F030C8.json +++ b/firmware/S42BV1.0/buildroot/boards/STM32F030C8.json @@ -14,8 +14,9 @@ "0x0004" ] ], - "ldscript": "STM32F030C8_FLASH.ld", + "ldscript": "buildroot/ldscripts/STM32F030C8_FLASH.ld", "mcu": "stm32f030c8t6", + "product_line": "STM32F030X8", "variant": "stm32f0" }, "debug": { diff --git a/firmware/S42BV1.0/platformio.ini b/firmware/S42BV1.0/platformio.ini index 354842e..7832c8a 100644 --- a/firmware/S42BV1.0/platformio.ini +++ b/firmware/S42BV1.0/platformio.ini @@ -10,12 +10,12 @@ [platformio] -src_dir = close_loop -build_dir = .pioenvs -lib_dir = .piolib -libdeps_dir = .piolibdeps -boards_dir = buildroot/boards -env_default = BIGTREE_S42B_V1_0 +src_dir = close_loop +build_dir = .pioenvs +lib_dir = .piolib +libdeps_dir = .piolibdeps +boards_dir = buildroot/boards +default_envs = BIGTREE_S42B_V1_0 [common] #extra_scripts = pre:buildroot/scripts/custom_filename.py @@ -27,7 +27,6 @@ build_flags = -fmax-errors=5 -D USE_FULL_LL_DRIVER #-D __STATIC_INLINE= -I close_loop/src/Libraries/cmsis - -I close_loop/src/Libraries/Stm32f0_lib/inc -I close_loop/src/User -I close_loop/src/Hardware @@ -42,6 +41,7 @@ platform = ststm32 framework = stm32cube board = STM32F030C8 upload_protocol = stlink +; upload_port = /dev/ttyACM0 #extra_scripts = ${common.extra_scripts} build_flags = ${common.build_flags}