ece-deploy - in a newvly and automatically install environment ece-deploy will fails on permissions

[oschon]

In a newly installed (fai) environment ece-deploy will fails on the error below unless a restart is first performed with the 'ece' script where the permissions are corrected:

[ece-deploy-0] Started @ Mon Jan 14 12:39:22 UTC 2013
[ece-deploy-0] This deployment has ID ip-10-58-107-107-1358167162 and is
[ece-deploy-0] logging to /var/log/escenic/ece-deploy.log
[ece-deploy-0] Remembering the deployment states for all instances ...
[ece#engine-engine1] /var/run/escenic/engine1.pid: /var/run/escenic isn't
[ece#engine-engine1] writable for user escenic

[skybert]

Sorry, but I cannot reproduce this. I have a clean system, with no /var/run/escenic at all. Then, I run ece-install with the following configuration:

fai_enabled=1
fai_presentation_install=1

This results in a runing instance with correction permissions on both run directory and PID file:

$ ls -ltra /var/run/escenic
total 12
-rw-r--r-- 1 escenic escenic    6 Jan 14 17:47 engine1.pid
drwxr-xr-x 9 root    root    4096 Jan 14 17:48 ..
drwxr-xr-x 2 escenic escenic 4096 Jan 14 17:52 

What is different in your case?

[skybert]

@mogsie had a hunch that your problems stemmed from that you do a reboot of your machine after running ece-install and that ece-installed didn't add /etc/init.d/ece to the default run levels.

However, I cannot re-produce this on my system, using fai_presentation_install. Do you use a different profile or combination of these? Does ece-install say something about the run levels?

You may have a search for it in the installation log like this:

$ grep -A 8 "run level" /var/log/escenic/ece-install.log 
[ece-install-732] Adding the ece init.d script to the default run levels ...
 Adding system startup for /etc/init.d/ece ...
   /etc/rc0.d/K20ece -> ../init.d/ece
   /etc/rc1.d/K20ece -> ../init.d/ece
   /etc/rc6.d/K20ece -> ../init.d/ece
   /etc/rc2.d/S20ece -> ../init.d/ece
   /etc/rc3.d/S20ece -> ../init.d/ece
   /etc/rc4.d/S20ece -> ../init.d/ece
   /etc/rc5.d/S20ece -> ../init.d/ece

[skybert]

Note: I could re-produce this if I had 4-profiles in the ece-install.conf.

Now fixed with commit 39c8eef.

Can you confirm this fix, @oschon ?