LDMSG.MSG

	.title	LDMSG - Status Codes for the logical disk utility
	.ident	"X-9"
! Author:
!
!	Jur van der Burg
!
! Modified By:
!
!	X-9	JvdB	Jur van der Burg	12-Mar-2009
!		Change SYSINFO to SYSINFO1 and add SYSINFO2
!
!	X-8	JvdB	Jur van der Burg	10-Sep-2006
!		Add options message
!		Add highwatermark warning
!		Change NOWDISCONN to DISCONNECTED
!		Add messages for tape
!
!	X-7	JvdB	Jur van der Burg	24-Feb-2006
!		Add VMS version and info message
!
!	X-6	JvdB	Jur van der Burg	12-Oct-2005
!		Add version messages
!		Correct spelling error
!
!	X-5	JvdB	Jur van der Burg	4-Aug-2005
!		Add NOTSAVED warning
!
!	X-4	JvdB	Jur van der Burg	4-Apr-2005
!		Match ident to VDE.
!		Add messages for LBN mapping
!

	.facility LD,1924/prefix=ld_

	.severity informational

CREATED		<File !AZ created>/fao_count=1
CONNECTED	<Connected !AZ to !AZ>/fao_count=2
DISCONNECTED	<Disconnected !AZ from !AZ>/fao_count=2
STATUS		<Device !AZ has a tracebuffer of !UL entries (!UL valid record!%S)>/fao_count=3
FDTACTIVE	<FDT Tracing is active>
ACCURATE	<Accurate timing is active>
UNIT		<Allocated device is !AZ>/fao_count=1
TRACESTOPPED	<Trace stopped by process !XL (!AZ)>/fao_count=2

	.severity warning

NOTCONNECTED	<Device !AZ is not connected>/fao_count=1
REMOTEALLOC	<Device !AZ is allocated on a remote node>/fao_count=1

	.severity fatal

CREATERR	<Unable to create file !AZ>/fao_count=1
OPENERR		<Unable to open file !AZ>/fao_count=1
CLOSERR		<Unable to close file !AZ>/fao_count=1
INFILERR	<Unable to open input file !AZ>/fao_count=1
OUTFILERR	<Unable to open output file !AZ>/fao_count=1
FILREADERR	<Unable to read input file !AZ>/fao_count=1
FILWRTERR	<Unable to write output file !AZ>/fao_count=1
CANTREADOLDFMT	<Can't read old format datafile (Version !UL)>/fao_count=1
DEVASSIGN	<Device has channels assigned>
ALRDYCONN	<Device already connected>
NOTCONN		<Device not connected>
FILEONVOLSET	<File watchpoint on volumeset not allowed>
FILEINUSE	<File incompatible connected to other LD disk in cluster>
DEVICEINUSE	<Device incompatible connected to other LD disk in cluster>
CONTTRACEACT	<Continuous tracing is already active for device !AZ>/fao_count=1
CONTTRACENOTACT	<Continuous tracing is not active for device !AZ>/fao_count=1
NOTRCDATA	<No trace data available>
TRCDISABL	<Tracing is disabled>
TRCENABL	<Tracing is already enabled>
BADENTPARAM	<Bad /ENTRIES parameter(s)>
PASTDATA	<Requested entry(s) past end of data>
CONFQUAL	<Conflicting qualifiers>
DUPUNIT		<Duplicate unitnumber>
BADUNIT		<Bad unit number !AZ>/fao_count=1
NOUNITSFOUND	<No usable logical disk units found>
BADDEVSYNTAX	<Bad device syntax (!AZ)>/fao_count=1
DETECTEDERR	<Detected fatal error>
NOWORLDPRIV	<No privilege to stop trace of device !AZ>/fao_count=1
NOGROUPPRIV	<No privilege to stop trace of device !AZ>/fao_count=1
NOWATCHDATA	<No watchpoint data available>
WPTNOTFOUND	<Watchpoint not found>
NOREADWRITE	<No read or write function specified for file mode>
VBNERROR	<Illegal virtual block number specified>
FILEONOTHER	<File not allowed to be on other device>
NOCLUSTER	<No cluster code loaded>
NOTVISIBLE	<Device is not visible on other nodes>
INVGEOMETRY	<Invalid geometry specified>
BADALLOCLASS	<Bad allocation class specified>
DEVCONNECTED	<Cannot set allocation class with active LD devices>
UNSUPPORTEDFS	<Unsupported filesystem>
CLONENOTMOUNTED	<Clone device must be mounted>
NOTSHARED	<File is not shared on other node>
NOSHARE		<No sharing specified for file on this node>
ALLOCLASS	<Allocation class mismatch>
UNITNUMBER	<Unitnumber mismatch>
TRACKS		<Tracks mismatch>
SECTORS		<Sectors mismatch>
CYLINDERS	<Cylinders mismatch>
MAXBLOCK	<Maximum blocknumber mismatch>
NOTADISK	<Clone device must be a disk>
BLKOUTOFRANGE	<Blocks out of range>
NOLBNMAP	<No lbn mapping specified>
STARTLBN	<Starting lbn mismatch>
DEVICENAME	<Devicename mismatch>
NOTREPLACED	<Device was not connected as replaced on other node>
RANGEINUSE	<LBN range already in use>
FILEIDINUSE	<File ID in use>
INCMPPROT	<Incompatible locking protocol in use>
INVVERSIONFMT	<Invalid driver version format>
INVOKESTARTUP	<LD has not been setup correctly, invoke @SYS$STARTUP:LD$STARTUP.COM>

	.severity warning

NOTSAVED	<Container file metadata has not been saved>
HIGHWATER	<Highwater marking is enabled on device, be patient>
NOSYSNAM	<SYSNAM privilege needed to define an EXEC logical name>

	.severity informational

VERSION		<LD version !AZ, module !AZ built on !AZ !AZ>/fao_count=4
DRIVERVERSION	<Driver version: !AZ>/fao_count=1
EXTENDED	<File !AZ extended to !UL blocks>/fao_count=2
SYSINFO1	<Node: !AZ, Hardware: !AZ, VMS version: !AZ>/fao_count=3
SYSINFO2	<Memory size: !AZ MBytes, Boot time: !AZ>/fao_count=2
OPTIONS		<!AZ>/fao_count=1
ANALYZEOK	<Container file structure successfully verified>
NOMETADATA	<No metadata available>
METADATA	<Metadata available>
BLANKTAPE	<Blank tape detected>

	.severity fatal

INCMPDEVTYPE	<Incompatible device type>
LOGICALNAMEERR	<Error defining locical name>
ANALYZEERR	<Container file structure error at logical block !UL>/fao_count=1
CONTTOOSMALL	<Container file too small (5000 blocks minimum)>
NEEDDEVICE	<Device name needed>

	.end