MMA7660FC datasheet 4k7 pull-up resistors for I2C

[gentunian]

Hi,

MMA7660FC datasheet recommends 4k7 pull-up resistors

Is there any reason to use 1K instead of 4k7?

Cheers!

[wicker]

Good catch! In my case, I think I had internal pullups on the MCU that I was using for testing (or I was just using a ton of 1K and no 4K7 in that design) so I'll leave this open and adjust the design to call out the 4K7 resistors from the datasheet.