GNU Screen terminates after starting up

[IgorTodorovskiIBM]

Type: screen

It will then terminate a few seconds later.

[mgrossmann]

On our system I get an CEEDUMP (0C4).....

[netskink]

Same here.

$ screen
CEE3204S The system detected a protection exception (System Completion Code=0C4).
         From compile unit zopen-ci2:./misc.c at entry point SaveStr at statement 60 at compile unit offset +000000003B42E21A at entry offset +0000000000000022 at address 000000003B42E21A.
SIGSEGV

[IgorTodorovskiIBM]

Once #2 lands, this should be resolved.

[AnthonyGiorgio]

I see this on my test system:

/global/zopen/prod/screen/bin> ./screen
[screen is terminating]

[IgorTodorovskiIBM]

I see this on my test system:

/global/zopen/prod/screen/bin> ./screen
[screen is terminating]

Interesting, I saw that early when it wasn't able to open a /dev/ptyp* device. Can you check if those devices exist?
I also enabled logging under /tmp/debug/, are you able to send those files to me?

[netskink]

Hello Igor,

I have a lot in /dev/. See here:

$ ls /dev/ptyp*
/dev/ptyp0000  /dev/ptyp0033  /dev/ptyp0066  /dev/ptyp0099  /dev/ptyp0132  /dev/ptyp0165  /dev/ptyp0198  /dev/ptyp0231
/dev/ptyp0001  /dev/ptyp0034  /dev/ptyp0067  /dev/ptyp0100  /dev/ptyp0133  /dev/ptyp0166  /dev/ptyp0199  /dev/ptyp0232
/dev/ptyp0002  /dev/ptyp0035  /dev/ptyp0068  /dev/ptyp0101  /dev/ptyp0134  /dev/ptyp0167  /dev/ptyp0200  /dev/ptyp0233
/dev/ptyp0003  /dev/ptyp0036  /dev/ptyp0069  /dev/ptyp0102  /dev/ptyp0135  /dev/ptyp0168  /dev/ptyp0201  /dev/ptyp0234
/dev/ptyp0004  /dev/ptyp0037  /dev/ptyp0070  /dev/ptyp0103  /dev/ptyp0136  /dev/ptyp0169  /dev/ptyp0202  /dev/ptyp0235
/dev/ptyp0005  /dev/ptyp0038  /dev/ptyp0071  /dev/ptyp0104  /dev/ptyp0137  /dev/ptyp0170  /dev/ptyp0203  /dev/ptyp0236
/dev/ptyp0006  /dev/ptyp0039  /dev/ptyp0072  /dev/ptyp0105  /dev/ptyp0138  /dev/ptyp0171  /dev/ptyp0204  /dev/ptyp0237
/dev/ptyp0007  /dev/ptyp0040  /dev/ptyp0073  /dev/ptyp0106  /dev/ptyp0139  /dev/ptyp0172  /dev/ptyp0205  /dev/ptyp0238
/dev/ptyp0008  /dev/ptyp0041  /dev/ptyp0074  /dev/ptyp0107  /dev/ptyp0140  /dev/ptyp0173  /dev/ptyp0206  /dev/ptyp0239
/dev/ptyp0009  /dev/ptyp0042  /dev/ptyp0075  /dev/ptyp0108  /dev/ptyp0141  /dev/ptyp0174  /dev/ptyp0207  /dev/ptyp0240
/dev/ptyp0010  /dev/ptyp0043  /dev/ptyp0076  /dev/ptyp0109  /dev/ptyp0142  /dev/ptyp0175  /dev/ptyp0208  /dev/ptyp0241
/dev/ptyp0011  /dev/ptyp0044  /dev/ptyp0077  /dev/ptyp0110  /dev/ptyp0143  /dev/ptyp0176  /dev/ptyp0209  /dev/ptyp0242
/dev/ptyp0012  /dev/ptyp0045  /dev/ptyp0078  /dev/ptyp0111  /dev/ptyp0144  /dev/ptyp0177  /dev/ptyp0210  /dev/ptyp0243
/dev/ptyp0013  /dev/ptyp0046  /dev/ptyp0079  /dev/ptyp0112  /dev/ptyp0145  /dev/ptyp0178  /dev/ptyp0211  /dev/ptyp0244
/dev/ptyp0014  /dev/ptyp0047  /dev/ptyp0080  /dev/ptyp0113  /dev/ptyp0146  /dev/ptyp0179  /dev/ptyp0212  /dev/ptyp0245
/dev/ptyp0015  /dev/ptyp0048  /dev/ptyp0081  /dev/ptyp0114  /dev/ptyp0147  /dev/ptyp0180  /dev/ptyp0213  /dev/ptyp0246
/dev/ptyp0016  /dev/ptyp0049  /dev/ptyp0082  /dev/ptyp0115  /dev/ptyp0148  /dev/ptyp0181  /dev/ptyp0214  /dev/ptyp0247
/dev/ptyp0017  /dev/ptyp0050  /dev/ptyp0083  /dev/ptyp0116  /dev/ptyp0149  /dev/ptyp0182  /dev/ptyp0215  /dev/ptyp0248
/dev/ptyp0018  /dev/ptyp0051  /dev/ptyp0084  /dev/ptyp0117  /dev/ptyp0150  /dev/ptyp0183  /dev/ptyp0216  /dev/ptyp0249
/dev/ptyp0019  /dev/ptyp0052  /dev/ptyp0085  /dev/ptyp0118  /dev/ptyp0151  /dev/ptyp0184  /dev/ptyp0217  /dev/ptyp0250
/dev/ptyp0020  /dev/ptyp0053  /dev/ptyp0086  /dev/ptyp0119  /dev/ptyp0152  /dev/ptyp0185  /dev/ptyp0218  /dev/ptyp0251
/dev/ptyp0021  /dev/ptyp0054  /dev/ptyp0087  /dev/ptyp0120  /dev/ptyp0153  /dev/ptyp0186  /dev/ptyp0219  /dev/ptyp0252
/dev/ptyp0022  /dev/ptyp0055  /dev/ptyp0088  /dev/ptyp0121  /dev/ptyp0154  /dev/ptyp0187  /dev/ptyp0220  /dev/ptyp0253
/dev/ptyp0023  /dev/ptyp0056  /dev/ptyp0089  /dev/ptyp0122  /dev/ptyp0155  /dev/ptyp0188  /dev/ptyp0221  /dev/ptyp0254
/dev/ptyp0024  /dev/ptyp0057  /dev/ptyp0090  /dev/ptyp0123  /dev/ptyp0156  /dev/ptyp0189  /dev/ptyp0222  /dev/ptyp0255
/dev/ptyp0025  /dev/ptyp0058  /dev/ptyp0091  /dev/ptyp0124  /dev/ptyp0157  /dev/ptyp0190  /dev/ptyp0223  /dev/ptyp0256
/dev/ptyp0026  /dev/ptyp0059  /dev/ptyp0092  /dev/ptyp0125  /dev/ptyp0158  /dev/ptyp0191  /dev/ptyp0224
/dev/ptyp0027  /dev/ptyp0060  /dev/ptyp0093  /dev/ptyp0126  /dev/ptyp0159  /dev/ptyp0192  /dev/ptyp0225
/dev/ptyp0028  /dev/ptyp0061  /dev/ptyp0094  /dev/ptyp0127  /dev/ptyp0160  /dev/ptyp0193  /dev/ptyp0226
/dev/ptyp0029  /dev/ptyp0062  /dev/ptyp0095  /dev/ptyp0128  /dev/ptyp0161  /dev/ptyp0194  /dev/ptyp0227
/dev/ptyp0030  /dev/ptyp0063  /dev/ptyp0096  /dev/ptyp0129  /dev/ptyp0162  /dev/ptyp0195  /dev/ptyp0228
/dev/ptyp0031  /dev/ptyp0064  /dev/ptyp0097  /dev/ptyp0130  /dev/ptyp0163  /dev/ptyp0196  /dev/ptyp0229
/dev/ptyp0032  /dev/ptyp0065  /dev/ptyp0098  /dev/ptyp0131  /dev/ptyp0164  /dev/ptyp0197  /dev/ptyp0230

How to enable logging?

[IgorTodorovskiIBM]

I have a fix coming for this soon

Logs are enabled by default, for now, and available under /tmp/debug/*

[netskink]

Wow Igor, you must have already put in a fix. I've done a few $ zopen update since this issue was opened. I've not done screen since then. With that said, the original issue is not there. I can create two screen's and cycle between them. The column spacing is off, but it is functional.

Anyway, I started screen up to get you a log file.

$ ls -ld /tmp/d*

Does not show /tmp/debug or anything related.

When I do start up screen though, it shows a brief message which says,

SetTTY (fd 0): ioctl failed: EDC5139I Operation not permitted

[IgorTodorovskiIBM]

Interesting, the latest build should emit logs to /tmp/debug/*. You ran zopen upgrade screen? You can confirm you're on the latest by checking the .releaseinfo file in zopen/prod/screen. It should match the tag of the latest build.

Also, the ioctl and prompt issues should have be resolved in that build as well.

[netskink]

Wow, you rock the roll!

After doing the upgrade, the SeTTY ioctl message went away, the screen works, even when splitting the screen. And the /tmp/debug directory contains three files:

$ ls /tmp/debug
SCREEN.17105941  screen.33883557  screen.child

I will close this issue.

[netskink]

Ahh, you opened it. Never mind. Thanks again.

[zlabs-github]

Is this issue still being worked on or fixed?

I get [screen is terminating] when I run screen with the latest version