t8122/t603[0124] PMP support#525
Open
yuyuyureka wants to merge 208 commits into
Open
Conversation
Signed-off-by: Hector Martin <marcan@marcan.st> Co-developed-by: Janne Grunau <j@jannau.net> Signed-off-by: Janne Grunau <j@jannau.net>
t8103: - WLAN (SMC PMU GPIO AsahiLinux#13) Signed-off-by: Hector Martin <marcan@marcan.st>
- WLAN (SMC PMU GPIO AsahiLinux#13) - SD (SMC PMU GPIO AsahiLinux#26) Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
This causes flakiness if shut down; don't do it until we find out what's going on. Signed-off-by: Hector Martin <marcan@marcan.st>
This should now work properly with power domain dependencies. With "apple,always-on" removed from ps_pmp add it as dependency for the dcp* power-domains. Fixes dcp crashes on power state changes. TODO: investigate if it is enough to power ps_pmp on during SetPowerState calls. Signed-off-by: Janne Grunau <j@jannau.net>
Enables keyboard and touchpad input on MacBook Air (M1, 2020) and MacBook Pro (13-inch, M1, 2020). Signed-off-by: Janne Grunau <j@jannau.net>
Enables keyboard and touchpad input on MacBook Pro (14/16-inch, M1 Pro/Max, 2021). Signed-off-by: Janne Grunau <j@jannau.net>
Those provide trackpad and keyboard for j413/j493. Add keyboard alias & layout props for t8112 laptops Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
arm64: dts: apple: t8103-j274: Add speaker I/V sense slots Specify TDM slots for the speaker amp IC to transmit I/V sense measurements in. arm64: dts: apple: j293/j313: Model SDZ GPIO as a regulator Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Co-developed-by: Hector Martin <marcan@marcan.st> Signed-off-by: Hector Martin <marcan@marcan.st>
arm64: dts: apple: t600x-j314-j316: Add speaker I/V sense slots Specify TDM slots for the speaker amp IC to transmit I/V sense measurements in. Make sure the channel order mirrors that of the playback PCM. arm64: dts: apple: t600x-j314-j316: Zero out unused speaker sense slots Make one left codec and one right codec zero out the unused slots on their respective speaker sense buses. Internally, inside the SoC, the left and right sense buses are ORed, and zeroing-out the unused slots on one bus is required so as not to corrupt the data on the other. arm64: dts: apple: t600x: describe shared SDZ GPIO for tas2764 machines with the tas2764 amp codec share a GPIO line for asserting/deasserting the SDZ pin on the chips. describe this as a regulator to facilitate chip reset on suspend/resume Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Co-developed-by: Hector Martin <marcan@marcan.st> Signed-off-by: Hector Martin <marcan@marcan.st> Co-developed-by: James Calligeros <jcalligeros99@gmail.com> Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
arm64: dts: apple: t8112: describe shared SDZ GPIO for tas2764 machines with the tas2764 amp codec share a GPIO line for asserting/deasserting the SDZ pin on the chips. describe this as a regulator to facilitate chip reset on suspend/resume Co-developed-by: Hector Martin <marcan@marcan.st> Signed-off-by: Hector Martin <marcan@marcan.st> Co-developed-by: James Calligeros <jcalligeros99@gmail.com> Signed-off-by: James Calligeros <jcalligeros99@gmail.com> Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
The Mac Studio M1 Max (t6001) model has a built-in USB3 hub. This hub has a firmware flash which is also connected to an AP SPI controller. The hub starts out in reset and the host is expected to bring it out of reset, potentially after upgrading/validating the firmware. We won't be doing anything with the firmware, so just use gpio-hog to flip the two GPIOs needed to bring up the hub chip. Signed-off-by: Hector Martin <marcan@marcan.st>
The dcp co-processor crashes on HDMI unplug while it apparently tries to notify pmp. Handle "notify_pmp" as a parent dependency for "ps_disp0_fe" and "ps_dispext_fe". Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
The display system is initialized by the bootloader to provide a simple framebuffer at startup. Memory for the framebuffer and heap for the display co-processor are alreay mapped through the IOMMU. IOMMU intialization must preserve this mappings to avoid crashing the display co-processor. The exisitng mappings are caried in the devicetree. They are applied during device attach to ensure the IOMMU framework is aware of these mapping. Mappings are filled by m1n1 during boot. Based on https://lore.kernel.org/asahi/20220923123557.866972-1-thierry.reding@gmail.com arch: arm64: apple: t8103: Add connector type property for DCP* arch: arm64: apple: Add dcp panel node for t8103 based laptops and imacs The panel node will contain among other properties backlight control related properties from the "backlight" node in the ADT. arm64: dts: apple: t8103: Add "ps_disp0_cpu0" as resets for dcp Signed-off-by: Janne Grunau <j@jannau.net>
The display system is initialized by the bootloader to provide a simple framebuffer at startup. Memory for the framebuffer and heap for the display co-processor are alreay mapped through the IOMMU. IOMMU intialization must preserve this mappings to avoid crashing the display co-processor. The exisitng mappings are caried in the devicetree. They are applied during device attach to ensure the IOMMU framework is aware of these mapping. Mappings are filled by m1n1 during boot. Based on https://lore.kernel.org/asahi/20220923123557.866972-1-thierry.reding@gmail.com arch: arm64: apple: t600x: Add connector type property for DCP* arch: arm64: apple: Add dcp panel node for t600x based laptops The panel node will contain among other properties backlight control related properties from the "backlight" node in the ADT. arm64: dts: apple: t600x: Add "ps_disp0_cpu0" as resets for dcp Signed-off-by: Janne Grunau <j@jannau.net>
arm64: dts: apple: t8112: Add "ps_disp0_cpu0" as resets for dcp arm64: dts: apple: t8112-j473: Add dptx-phy power-domain The HDMI output used by framebuffer0 requires the display controller and external DP phy power-domains to remain active. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
Removes the "apple,always-on" property from ps_disp0_fe/cpu0. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Asahi Lina <lina@asahilina.net>
to be dropped Signed-off-by: Asahi Lina <lina@asahilina.net>
Apple M3 Pro and Max devices are using 'gp00' keys for GPIO in addition to 'gP00' keys. Add a second compatible to handle this keys with an additional macsmc-gpio instance. Signed-off-by: Janne Grunau <j@jannau.net>
Add support for SMC GPIO keys with a lower letter 'p' via the "apple,smc-low-gpio" compatible. This adds support for a second macsmc-gpio controller using 'gp00' keys. These keys are used on Apple M3 Pro and Max MacBooks in the controller for keyboard and trackpad and for the built-in DisplayPort to HDMI converter. Signed-off-by: Janne Grunau <j@jannau.net>
Apple M3 Pro and Max devices are using 'gp00' keys for GPIO in addition to 'gP00' keys. These keys are handled by an additional macsmc-gpio instance using the "apple,smc-low-gpio" compatible. Signed-off-by: Janne Grunau <j@jannau.net>
- WLAN/BT (SMC PMU GPIO AsahiLinux#13) (all devices) - ASM3142 (SMC PMU GPIO AsahiLinux#14) (j434, iMac with 4 USB-C ports) - SD card reader (SMC PMU GPIO AsahiLinux#23) (j504, 14-inch MacBook Pro) Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Yureka <yuka@yuka.dev>
The internal keyboard and trackpad HID on MacBook variants of the Apple M3 (t8122) SoC are connected through a Apple -developed protocol called DockChannel and mediated by a coprocessor known as the Multi-Touch Processor (MTP). This commit adds the nessecary device tree nodes to the M3's device tree for internal HID to work. It is disabled by default, to be enabled only in MacBook board files where it is tested and confirmed to work. Co-developed-by: Alyssa Milburn <amilburn@zall.org> Signed-off-by: Alyssa Milburn <amilburn@zall.org> Signed-off-by: Michael Reeves <michael.reeves077@gmail.com>
Add mtp device nodes for t8122 (M3) based MacBooks. Signed-off-by: Michael Reeves <michael.reeves077@gmail.com>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
List trackpad firmware files and activate MTP devices nodes on all t6030, t6031 and t6034 based MacBooks. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sasha Finkelstein <k@chaosmail.tech>
…g cycles Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
…ration Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
jannau
reviewed
Jun 29, 2026
| #else | ||
| power-domains = <&ps_ans>, | ||
| #endif | ||
| <&ps_apcie_sys_st>; |
Member
There was a problem hiding this comment.
does moving ps_apcie_sys_st to the pmp_report subnode causes any issues? Even if I think I'd still prefer
#if defined(APPLE_USE_PMP)
power-domains = <&pmp_report_ans>, <&ps_apcie_sys_st>;
#else
power-domains = <&ps_ans>, <&ps_apcie_sys_st>;
#endif
| power-domains = <&ps_ans_die1>; | ||
| }; | ||
| &nvme_die1 { | ||
| power-domains = <&ps_ans_die1>; |
Member
There was a problem hiding this comment.
this misses ps_apcie_sys_st and ps_apcie_sys_st1
yuyuyureka
force-pushed
the
m3-pmp
branch
2 times, most recently
from
f559f81 to
b236a4c
Compare
t6031/t6034 continue using the same offsets as t602x Signed-off-by: Yureka Lilian <yureka@cyberchaos.dev>
Signed-off-by: Yureka <yuka@yuka.dev>
Signed-off-by: Yureka <yuka@yuka.dev>
Tested on t6034 Signed-off-by: Yureka <yuka@yuka.dev>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
10 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Only T6034 is tested.