Redefine command-buffer simultaneous-use

api/cl_khr_command_buffer.asciidoc

@@ -3,16 +3,14 @@
 
 include::{generated}/meta/{refprefix}cl_khr_command_buffer.txt[]
 
-// *Revision*::
-//    0.9.6
 // *Extension and Version Dependencies*::
 //     This extension requires OpenCL 1.2 or later.
 //     Buffering of SVM commands requires OpenCL 2.0 or later.
 
 === Other Extension Metadata
 
 *Last Modified Date*::
-    2024-12-13
+    2025-07-10
 *IP Status*::
     No known IP claims.
 *Contributors*::
@@ -124,14 +122,6 @@ There are no gurantees made around the values of sync-points returned from
 adding commands to a command-buffer. Any semantics that a could be inferred
 from the sync-point values returned is implementation defined.
 
-==== Simultaneous Use
-
-The optional simultaneous use capability was added to the extension so that
-vendors can support pipelined workflows, where command-buffers are repeatedly
-enqueued without blocking in user code. However, simultaneous use may result in
-command-buffers being more expensive to enqueue than in a sequential model, so
-the capability is optional to enable optimizations on command-buffer recording.
-
 === Interactions With Other Extensions
 
 The introduction of the command-buffer abstraction enables functionality
@@ -242,11 +232,8 @@ features:
   * {cl_device_command_buffer_capabilities_khr_TYPE}
   ** {CL_COMMAND_BUFFER_CAPABILITY_KERNEL_PRINTF_KHR}
   ** {CL_COMMAND_BUFFER_CAPABILITY_DEVICE_SIDE_ENQUEUE_KHR}
-  ** {CL_COMMAND_BUFFER_CAPABILITY_SIMULTANEOUS_USE_KHR}
   * {cl_command_buffer_properties_khr_TYPE}
   ** {CL_COMMAND_BUFFER_FLAGS_KHR}
-  * {cl_command_buffer_flags_khr_TYPE}
-  ** {CL_COMMAND_BUFFER_SIMULTANEOUS_USE_KHR}
   * {cl_command_buffer_info_khr_TYPE}
   ** {CL_COMMAND_BUFFER_QUEUES_KHR}
   ** {CL_COMMAND_BUFFER_NUM_QUEUES_KHR}
@@ -257,7 +244,6 @@ features:
   * {cl_command_buffer_state_khr_TYPE}
   ** {CL_COMMAND_BUFFER_STATE_RECORDING_KHR}
   ** {CL_COMMAND_BUFFER_STATE_EXECUTABLE_KHR}
-  ** {CL_COMMAND_BUFFER_STATE_PENDING_KHR}
   * {cl_command_type_TYPE}
   ** {CL_COMMAND_COMMAND_BUFFER_KHR}
   * New Error Codes
@@ -470,3 +456,6 @@ features:
   * 0.9.7, 2024-12-13
   ** Refactor queue compatability between command-buffer creation and enqueue
      (experimental).
+  * 0.9.8, 2025-07-10
+  ** Rework simultaneous use definition and remove pending state
+     (experimental).

api/cl_khr_command_buffer_mutable_dispatch.asciidoc

@@ -6,7 +6,7 @@ include::{generated}/meta/{refprefix}cl_khr_command_buffer_mutable_dispatch.txt[
 === Other Extension Metadata
 
 *Last Modified Date*::
-    2024-09-05
+    2025-08-08
 *IP Status*::
     No known IP claims.
 *Contributors*::
@@ -41,6 +41,15 @@ This allows inputs and outputs to the kernel, as well as work-item sizes and
 offsets, to change without having to re-record the entire command sequence
 in a new command-buffer.
 
+==== Simultaneous Use
+
+The optional <<simultaneous-use, simultaneous use>> capability was added to the
+extension so that vendors could support concurrent execution of the same
+command-buffer object which has been updated between submissions. However,
+simultaneous use may result in command-buffers having a larger overhead to
+implement, so the capability is optional to enable optimizations when this
+usage isn't required by a user.
+
 === Interactions With Other Extensions
 
 The {clUpdateMutableCommandsKHR} entry-point has been designed for the purpose
@@ -72,6 +81,8 @@ void pointer using {cl_command_buffer_update_type_khr_TYPE}.
 
   * {cl_device_info_TYPE}
   ** {CL_DEVICE_MUTABLE_DISPATCH_CAPABILITIES_KHR}
+  * {cl_device_command_buffer_capabilities_khr_TYPE}
+  ** {CL_COMMAND_BUFFER_CAPABILITY_SIMULTANEOUS_USE_KHR}
   * {cl_command_properties_khr_TYPE}
   ** {CL_MUTABLE_DISPATCH_ASSERTS_KHR}
   ** {CL_MUTABLE_DISPATCH_UPDATABLE_FIELDS_KHR}
@@ -95,6 +106,7 @@ void pointer using {cl_command_buffer_update_type_khr_TYPE}.
   ** {CL_MUTABLE_COMMAND_COMMAND_TYPE_KHR}
   * {cl_command_buffer_flags_khr_TYPE}
   ** {CL_COMMAND_BUFFER_MUTABLE_KHR}
+  ** {CL_COMMAND_BUFFER_SIMULTANEOUS_USE_KHR}
   * {cl_command_buffer_properties_khr_TYPE}
   ** {CL_COMMAND_BUFFER_MUTABLE_DISPATCH_ASSERTS_KHR}
   * {cl_command_buffer_update_type_khr_TYPE}
@@ -363,3 +375,7 @@ may be a introduced as a stand alone extension.
   * Revision 0.9.3, 2024-09-05
   ** Rename `CL_MUTABLE_DISPATCH_PROPERTIES_ARRAY_KHR` to
      `CL_MUTABLE_COMMAND_PROPERTIES_ARRAY_KHR` (experimental).
+  * Revision 0.9.4, 2025-08-08
+    **  Move `CL_COMMAND_BUFFER_SIMULTANEOUS_USE_KHR` and
+        `CL_COMMAND_BUFFER_CAPABILITY_SIMULTANEOUS_USE_KHR` in this
+        extension from the base extension (experimental).

api/opencl_platform_layer.asciidoc

@@ -1790,11 +1790,13 @@ include::{generated}/api/version-notes/CL_COMMAND_BUFFER_CAPABILITY_KERNEL_PRINT
 
 include::{generated}/api/version-notes/CL_COMMAND_BUFFER_CAPABILITY_DEVICE_SIDE_ENQUEUE_KHR.asciidoc[]
 
+ifdef::cl_khr_command_buffer_mutable_dispatch[]
         {CL_COMMAND_BUFFER_CAPABILITY_SIMULTANEOUS_USE_KHR_anchor} Device
-        supports the command-buffers having a <<pending_count, Pending
-        Count>> that exceeds 1.
+        supports enqueueing command-buffers with a <<simultaneous-use,
+        simultaneous use>> usage pattern.
 
 include::{generated}/api/version-notes/CL_COMMAND_BUFFER_CAPABILITY_SIMULTANEOUS_USE_KHR.asciidoc[]
+endif::cl_khr_command_buffer_mutable_dispatch[]
 
 ifdef::cl_khr_command_buffer_multi_device[]
         {CL_COMMAND_BUFFER_CAPABILITY_MULTIPLE_QUEUE_KHR_anchor} Device

api/opencl_runtime_layer.asciidoc

@@ -14618,13 +14618,14 @@ on one or more command-queues without any application code interaction.
 Grouping the operations together allows efficient enqueuing of repetitive
 operations, as well as enabling driver optimizations.
 
-Command-buffers are _sequential use_ by default, but may also be set to
-_simultaneous use_ on creation if the device optionally supports this
-capability.
-A sequential use command-buffer must have a <<pending_count, Pending Count>>
-of 0 or 1.
-The simultaneous use capability removes this restriction and allows
-command-buffers to have a <<pending_count, Pending Count>> greater than 1.
+Upon creation a command-buffer is in the <<recording, Recording>> state. In
+order for the command-buffer to be enqueued it must first be finalized using
+{clFinalizeCommandBufferKHR}, after which no further commands can be recorded.
+A command-buffer is enqueued for execution on command-queues with a call to
+{clEnqueueCommandBufferKHR}. It is always valid to call
+{clEnqueueCommandBufferKHR} with a command-buffer that has previously been
+enqueued, provided the call doesn't violate the definition of
+<<simultaneous-use, simultaneous use>>.
 
 Command-buffers are created using an ordered list of command-queues that
 commands are recorded to and execute on by default. All these queue objects
@@ -14690,6 +14691,32 @@ If using layered extension {cl_khr_command_buffer_mutable_dispatch_EXT},
 usage>>.
 ====
 
+Simultaneous use is defined using the _prerequisite_ terminology from the
+<<_execution_model, execution model>>.
+ifndef::cl_khr_command_buffer_multi_device[]
+A command-buffer exhibits undefined behavior if a simultaneous use
+pattern occurs.
+endif::cl_khr_command_buffer_multi_device[]
+ifdef::cl_khr_command_buffer_multi_device[]
+Simultaneous use is an optional feature for devices to support concurrent
+executions of a command-buffer which have been updated between submissions.
+A command-buffer must be created with {CL_COMMAND_BUFFER_SIMULTANEOUS_USE_KHR}
+to avoid undefined behavior if a simultaneous use pattern occurs.
+endif::cl_khr_command_buffer_multi_device[]
+
+[[simultaneous-use]]
+Simultaneous Use:: When a command-buffer is submitted for
+execution without a prerequisite on all the previous submissions of the same
+command-buffer which are not in the {CL_COMPLETE} state.
+
+[NOTE]
+====
+An example of simultaneous use would be two submissions of the same
+command-buffer to a single out-of-order queue, without any events or barriers
+used to express a dependency between the two enqueue calls. Using a single
+in-order queue, events, or barriers to express dependencies between submissions
+of the same command-buffer would each be ways to avoid simultaneous use.
+====
 
 ifdef::cl_khr_command_buffer_multi_device[]
 === Command-Buffers and Multiple Devices
@@ -14733,7 +14760,9 @@ endif::cl_khr_command_buffer_multi_device[]
 
 === Command-Buffer Lifecycle
 
-A command-buffer is always in one of the following states:
+A command-buffer is created in the recording state and transitions to the
+executable state when finalized, at which point it cannot move back to
+the recording state.
 
 [[recording]]
 Recording:: Initial state of a command-buffer on creation, where commands can be
@@ -14743,11 +14772,6 @@ recorded to the command-buffer.
 Executable:: State after command recording has finished with
 {clFinalizeCommandBufferKHR} and the command-buffer may be enqueued.
 
-[[pending]]
-Pending:: Once a command-buffer has been enqueued to a command-queue it enters
-the Pending state until completion, at which point it moves back to the
-<<executable, Executable>> state.
-
 // Image generated from the following mermaid diagram description using https://mermaid.live
 // Ideally we'd use the asciidoctor-diagram extension to generate the rendered diagram, but
 // there are issues installing the gem with ruby 2.3.3
@@ -14757,21 +14781,10 @@ the Pending state until completion, at which point it moves back to the
 // stateDiagram-v2
 //     [*] --> Recording: Create
 //     Recording -->Executable: Finalize
-//     Executable --> Pending: Enqueue
-//     Pending --> Executable: Completion
 // ....
 
 image::images/commandbuffer_lifecycle.png[align="center", title="Lifecycle of a command-buffer."]
 
-[[pending_count]]
-The Pending Count is the number of copies of the command
-buffer in the <<pending, Pending>> state.
-By default a command-buffer's Pending Count must be 0 or 1.
-If the command-buffer was created with
-{CL_COMMAND_BUFFER_SIMULTANEOUS_USE_KHR} then the command-buffer may have a
-Pending Count greater than 1.
-
-
 === Creating Command-Buffer Objects
 
 [open,refpage='clCreateCommandBufferKHR',desc='Create a command-buffer',type='protos']
@@ -14812,13 +14825,15 @@ include::{generated}/api/version-notes/CL_COMMAND_BUFFER_FLAGS_KHR.asciidoc[]
   | {cl_command_buffer_flags_khr_TYPE}
       | This is a bitfield and can be set to a combination of the following values:
 
+ifdef::cl_khr_command_buffer_mutable_dispatch[]
         {CL_COMMAND_BUFFER_SIMULTANEOUS_USE_KHR_anchor} - Allow multiple
-        instances of the command-buffer to be submitted to the device for
-        execution.
-        If set, devices must support
+        instances of the command-buffer to be scheduled for execution on the
+        device in a usage pattern that exhibits <<simultaneous-use,
+        simultaneous use>>. If set, devices must support
         {CL_COMMAND_BUFFER_CAPABILITY_SIMULTANEOUS_USE_KHR}.
 
 include::{generated}/api/version-notes/CL_COMMAND_BUFFER_SIMULTANEOUS_USE_KHR.asciidoc[]
+endif::cl_khr_command_buffer_mutable_dispatch[]
 
 ifdef::cl_khr_command_buffer_multi_device[]
       {CL_COMMAND_BUFFER_DEVICE_SIDE_SYNC_KHR_anchor} - All commands in the
@@ -14898,16 +14913,6 @@ ifdef::cl_khr_command_buffer_multi_device[]
 |====
 endif::cl_khr_command_buffer_multi_device[]
 
-[NOTE]
-====
-Upon creation the command-buffer is defined as being in the
-<<recording, Recording>> state, in order for the command-buffer to be enqueued
-it must first be finalized using {clFinalizeCommandBufferKHR} after which no
-further commands can be recorded.
-A command-buffer is submitted for execution on command-queues with a call to
-{clEnqueueCommandBufferKHR}.
-====
-
 // refError
 
 {clCreateCommandBufferKHR} returns a valid non-zero command-buffer and
@@ -15089,9 +15094,6 @@ execution was successfully queued, or one of the errors below:
   * {CL_INVALID_COMMAND_BUFFER_KHR} if _command_buffer_ is not a valid
     command-buffer.
   * {CL_INVALID_OPERATION} if _command_buffer_ has not been finalized.
-  * {CL_INVALID_OPERATION} if _command_buffer_ was not created with the
-    {CL_COMMAND_BUFFER_SIMULTANEOUS_USE_KHR} flag and is in the <<pending,
-    Pending>> state.
   * {CL_INVALID_VALUE} if _queues_ is `NULL` and _num_queues_ is > 0, or
     _queues_ is not `NULL` and _num_queues_ is 0.
   * {CL_INVALID_VALUE} if _num_queues_ is > 0 and not the same value as
@@ -15125,6 +15127,17 @@ execution was successfully queued, or one of the errors below:
     required by the OpenCL implementation on the host.
 --
 
+ifndef::cl_khr_command_buffer_mutable_dispatch[]
+Calling {clEnqueueCommandBufferKHR} in a usage pattern that exhbits
+<<simultaneous-use, simultaneous use>> results in undefined behavior.
+endif::cl_khr_command_buffer_mutable_dispatch[]
+
+ifdef::cl_khr_command_buffer_mutable_dispatch[]
+Calling {clEnqueueCommandBufferKHR} in a usage pattern that exhbits
+<<simultaneous-use, simultaneous use>> when _command_buffer_ was not created
+with the {CL_COMMAND_BUFFER_SIMULTANEOUS_USE_KHR} flag results in undefined
+behavior.
+endif::cl_khr_command_buffer_mutable_dispatch[]
 
 === Recording Commands to a Command-Buffer
 
@@ -16553,9 +16566,7 @@ include::{generated}/api/version-notes/clRemapCommandBufferKHR.asciidoc[]
   * _errcode_ret_ returns an appropriate error code.
     If _errcode_ret_ is `NULL`, no error code is returned.
 
-The returned command-buffer has the same state as the input command-buffer,
-unless the input command-buffer is in the <<pending, Pending>> state, in
-which case the returned command-buffer has state <<executable, Executable>>.
+The returned command-buffer has the same state as the input command-buffer.
 
 // refError
 
@@ -16682,10 +16693,6 @@ one of the errors below is returned:
   * {CL_OUT_OF_HOST_MEMORY} if there is a failure to allocate resources
     required by the OpenCL implementation on the host.
 
-Using this function when _command_buffer_ is in the <<pending, pending>>
-state and not created with the {CL_COMMAND_BUFFER_SIMULTANEOUS_USE_KHR} flag
-causes undefined behavior.
-
 [NOTE]
 ====
 Performant usage is to call {clUpdateMutableCommandsKHR} only when the
@@ -16903,18 +16910,10 @@ include::{generated}/api/version-notes/CL_COMMAND_BUFFER_STATE_KHR.asciidoc[]
 include::{generated}/api/version-notes/CL_COMMAND_BUFFER_STATE_RECORDING_KHR.asciidoc[]
 
         {CL_COMMAND_BUFFER_STATE_EXECUTABLE_KHR_anchor} is returned when
-        _command_buffer_ has been finalized and there is not a <<pending,
-        Pending>> instance of _command_buffer_ awaiting completion on a
-        command_queue.
+        _command_buffer_ has been finalized.
 
 include::{generated}/api/version-notes/CL_COMMAND_BUFFER_STATE_EXECUTABLE_KHR.asciidoc[]
 
-        {CL_COMMAND_BUFFER_STATE_PENDING_KHR_anchor} is returned when an
-        instance of _command_buffer_ has been enqueued for execution but not
-        yet completed.
-
-include::{generated}/api/version-notes/CL_COMMAND_BUFFER_STATE_PENDING_KHR.asciidoc[]
-
 | {CL_COMMAND_BUFFER_PROPERTIES_ARRAY_KHR_anchor}
 
 include::{generated}/api/version-notes/CL_COMMAND_BUFFER_PROPERTIES_ARRAY_KHR.asciidoc[]

xml/cl.xml

@@ -1371,7 +1371,6 @@ server's OpenCL/api-docs repository.
     <enums name="cl_command_buffer_state_khr" vendor="Khronos">
         <enum value="0"            name="CL_COMMAND_BUFFER_STATE_RECORDING_KHR"/>
         <enum value="1"            name="CL_COMMAND_BUFFER_STATE_EXECUTABLE_KHR"/>
-        <enum value="2"            name="CL_COMMAND_BUFFER_STATE_PENDING_KHR"/>
     </enums>
     <enums name="cl_mutable_dispatch_fields_khr" vendor="Khronos" type="bitmask">
         <enum bitpos="0"            name="CL_MUTABLE_DISPATCH_GLOBAL_OFFSET_KHR"/>
@@ -7324,7 +7323,7 @@ server's OpenCL/api-docs repository.
                 <enum name="CL_KERNEL_EXEC_INFO_DEVICE_PTRS_EXT"/>
             </require>
         </extension>
-        <extension name="cl_khr_command_buffer" revision="0.9.7" supported="opencl" depends="CL_VERSION_1_2" ratified="opencl" experimental="true">
+        <extension name="cl_khr_command_buffer" revision="0.9.8" supported="opencl" depends="CL_VERSION_1_2" ratified="opencl" experimental="true">
             <require>
                 <type name="CL/cl.h"/>
             </require>
@@ -7347,14 +7346,10 @@ server's OpenCL/api-docs repository.
             <require comment="cl_device_command_buffer_capabilities_khr - bitfield">
                 <enum name="CL_COMMAND_BUFFER_CAPABILITY_KERNEL_PRINTF_KHR"/>
                 <enum name="CL_COMMAND_BUFFER_CAPABILITY_DEVICE_SIDE_ENQUEUE_KHR"/>
-                <enum name="CL_COMMAND_BUFFER_CAPABILITY_SIMULTANEOUS_USE_KHR"/>
             </require>
             <require comment="cl_command_buffer_properties_khr">
                <enum name="CL_COMMAND_BUFFER_FLAGS_KHR"/>
             </require>
-            <require comment="cl_command_buffer_flags_khr - bitfield">
-               <enum name="CL_COMMAND_BUFFER_SIMULTANEOUS_USE_KHR"/>
-            </require>
             <require comment="Error codes">
                 <enum name="CL_INVALID_COMMAND_BUFFER_KHR"/>
                 <enum name="CL_INVALID_SYNC_POINT_WAIT_LIST_KHR"/>
@@ -7371,7 +7366,6 @@ server's OpenCL/api-docs repository.
             <require comment="cl_command_buffer_state_khr">
                <enum name="CL_COMMAND_BUFFER_STATE_RECORDING_KHR"/>
                <enum name="CL_COMMAND_BUFFER_STATE_EXECUTABLE_KHR"/>
-               <enum name="CL_COMMAND_BUFFER_STATE_PENDING_KHR"/>
             </require>
             <require comment="cl_command_type">
                 <enum name="CL_COMMAND_COMMAND_BUFFER_KHR"/>
@@ -7471,7 +7465,7 @@ server's OpenCL/api-docs repository.
                 <enum name="CL_QUEUE_JOB_SLOT_ARM"/>
             </require>
         </extension>
-        <extension name="cl_khr_command_buffer_mutable_dispatch" revision="0.9.3" supported="opencl" depends="cl_khr_command_buffer" ratified="opencl" experimental="true" comment="requires cl_khr_command_buffer 0.9.5 or later">
+        <extension name="cl_khr_command_buffer_mutable_dispatch" revision="0.9.4" supported="opencl" depends="cl_khr_command_buffer" ratified="opencl" experimental="true" comment="requires cl_khr_command_buffer 0.9.8 or later">
             <require>
                 <type name="CL/cl.h"/>
             </require>
@@ -7485,8 +7479,14 @@ server's OpenCL/api-docs repository.
                 <type name="cl_mutable_dispatch_asserts_khr"/>
             </require>
             <require comment="cl_command_buffer_flags_khr - bitfield">
+               <enum name="CL_COMMAND_BUFFER_SIMULTANEOUS_USE_KHR"/>
                <enum name="CL_COMMAND_BUFFER_MUTABLE_KHR"/>
             </require>
+
+            <require comment="cl_device_command_buffer_capabilities_khr - bitfield">
+                <enum name="CL_COMMAND_BUFFER_CAPABILITY_SIMULTANEOUS_USE_KHR"/>
+            </require>
+
             <require comment="Error codes">
                 <enum name="CL_INVALID_MUTABLE_COMMAND_KHR"/>
             </require>