Add Sweep Pipe Network example with legend and FPS monitor

.gitignore

@@ -26,6 +26,7 @@ node_modules/
 # JS/TS build artifacts
 dist/
 main/opengeometry-three/examples-dist/
+main/opengeometry-three/examples-vite/.generated/
 main/opengeometry/pkg/
 
 .DS_Store

AI-DOCs/2026-03-11-sweep-pipe-network-example.md

@@ -0,0 +1,35 @@
+# Sweep Pipe Network Example Handoff
+
+## What changed
+- Added a new operation example page: `main/opengeometry-three/examples-vite/operations/sweep-pipe-network.html`.
+- The example builds a building-like routed pipe network using `Sweep` with explicit path + profile.
+- Added 4 pipe types (Supply Air, Return Air, Chilled Water, Drain), each with color, dimensions, elevation, cap settings, and multiple routes.
+- Added cuboid-based walls and a control toggle for outlines.
+- Added on-screen legend that maps colors to pipe types and profile sizes.
+- Added FPS monitor via Three.js `Stats` module.
+- Added console config dump (`console.groupCollapsed`) for the full network setup.
+- Registered the example in `main/opengeometry-three/examples-vite/index.html` and updated operations count.
+
+## Why it changed
+- To provide a closer real-world routing sample that combines sweep path/profile with visualization controls and diagnostics.
+- To support performance visibility (FPS) and quick configuration inspection in the browser console.
+
+## How to test locally
+1. Ensure wasm bindings are built for `main/opengeometry/pkg` (not available in this environment run).
+2. Run examples dev server:
+   - `npm --prefix main/opengeometry-three run dev-example-three -- --host 0.0.0.0 --port 4173`
+3. Open:
+   - `http://localhost:4173/operations/sweep-pipe-network.html`
+4. Validate:
+   - Toggle outlines in the control panel.
+   - Confirm 4 pipe legend entries and color correspondence.
+   - Confirm FPS panel appears at top-left.
+   - Confirm network config prints in browser console.
+
+## Backward compatibility
+- Existing examples remain untouched.
+- Only added one new example page and one index card entry.
+
+## Known caveats / follow-ups
+- This environment did not contain generated wasm assets under `main/opengeometry/pkg`, so vite build/dev fails import resolution here.
+- After generating wasm bindings, the example should run as expected with the existing architecture.

AI-DOCs/opengeometry/2026-03-04-halfedge-brep-migration-handoff.md

@@ -0,0 +1,99 @@
+# Half-Edge BREP Migration Handoff
+
+## What Changed
+
+- Replaced the BREP core model with a half-edge-first topology schema.
+- Added canonical topology entities:
+  - `Vertex { outgoing_halfedge }`
+  - `HalfEdge`
+  - `Edge { halfedge, twin_halfedge }`
+  - `Loop`
+  - `Face { outer_loop, inner_loops, shell_ref }`
+  - `Wire`
+  - `Shell`
+- Added `BrepBuilder` for deterministic topology construction.
+- Added `Brep::validate_topology() -> Result<(), BrepError>` with manifold and linkage checks.
+- Reworked projection/HLR to derive visibility from half-edge adjacency.
+- Migrated primitives and sweep/extrude operations to builder-based half-edge output.
+- Updated wasm mutating methods to checked APIs (`Result<(), JsValue>`) for invalid topology/input states.
+- Updated three integration (`shapes/sphere.ts`) to consume outline buffers from kernel instead of legacy edge endpoint fields.
+
+## Breaking Changes
+
+- `get_brep_serialized()` now emits the new half-edge schema.
+- Removed legacy fields from serialized BREP:
+  - `edges[].v1`
+  - `edges[].v2`
+  - `faces[].face_indices`
+  - root `holes`
+  - root `hole_edges`
+- Mutating methods such as `set_config` / `generate_geometry` now return `Result<(), JsValue>` at wasm boundaries.
+
+## Legacy Cleanup
+
+- Removed:
+  - `main/opengeometry/src/utility/geometry.rs`
+  - `main/opengeometry/src/primitives/cylinderOld.rs`
+- Removed stale commented legacy BREP scaffolding from `main/opengeometry/src/lib.rs`.
+- Replaced old extrude geometry dependency with local `Geometry` in `operations/extrude.rs`.
+
+## Implementation Notes
+
+- `BrepBuilder` enforces:
+  - canonical undirected edge mapping
+  - twin linking of opposite directed halfedges
+  - non-manifold rejection (`> 2` halfedges per edge)
+  - loop closure and link consistency
+- Face triangulation inputs now come from `outer_loop` and `inner_loops` via `Brep::get_vertices_and_holes_by_face_id`.
+- Wire primitives (`line`, `curve`, `polyline`, `arc`) are represented as `wires` and edge-backed halfedges.
+- Solid primitives (`cuboid`, `cylinder`, `wedge`, `sphere`, `sweep`) assign shell topology.
+
+## Files Added
+
+- `main/opengeometry/src/brep/error.rs`
+- `main/opengeometry/src/brep/builder.rs`
+- `main/opengeometry/src/brep/loop.rs`
+- `main/opengeometry/src/brep/wire.rs`
+- `main/opengeometry/src/brep/shell.rs`
+
+## Files Reworked (Core)
+
+- `main/opengeometry/src/brep/mod.rs`
+- `main/opengeometry/src/brep/vertex.rs`
+- `main/opengeometry/src/brep/halfedge.rs`
+- `main/opengeometry/src/brep/edge.rs`
+- `main/opengeometry/src/brep/face.rs`
+- `main/opengeometry/src/export/projection.rs`
+- `main/opengeometry/src/operations/extrude.rs`
+- `main/opengeometry/src/operations/sweep.rs`
+
+## Files Reworked (Primitives)
+
+- `main/opengeometry/src/primitives/line.rs`
+- `main/opengeometry/src/primitives/curve.rs`
+- `main/opengeometry/src/primitives/polyline.rs`
+- `main/opengeometry/src/primitives/arc.rs`
+- `main/opengeometry/src/primitives/rectangle.rs`
+- `main/opengeometry/src/primitives/polygon.rs`
+- `main/opengeometry/src/primitives/cuboid.rs`
+- `main/opengeometry/src/primitives/cylinder.rs`
+- `main/opengeometry/src/primitives/wedge.rs`
+- `main/opengeometry/src/primitives/sphere.rs`
+- `main/opengeometry/src/primitives/sweep.rs`
+
+## Validation Run
+
+- `cargo fmt --manifest-path main/opengeometry/Cargo.toml`
+- `cargo check --manifest-path main/opengeometry/Cargo.toml`
+- `cargo test --manifest-path main/opengeometry/Cargo.toml`
+- `cargo test --examples --manifest-path main/opengeometry/Cargo.toml`
+- `npm run build-three`
+
+All commands above completed successfully.
+
+## Known Caveats / Follow-ups
+
+- Existing non-critical warnings still present in unrelated legacy code:
+  - `operations/windingsort.rs` (`ccw_and_flag` naming)
+  - `geometry/triangle.rs` (`crso` unused variable)
+- Consumers that deserialize old BREP JSON must migrate to the new half-edge schema.

AI-DOCs/opengeometry/2026-03-04-stl-export-handoff.md

@@ -0,0 +1,106 @@
+# STL Export Handoff (Binary STL + Three.js Validation)
+
+## What Changed
+
+- Added binary STL export support in the Rust core:
+  - `main/opengeometry/src/export/stl.rs`
+  - best-effort and strict policies
+  - single-BREP and multi-BREP export APIs
+  - native file output helpers (`cfg(not(target_arch = "wasm32"))`)
+- Wired STL export through `scenegraph`:
+  - `exportBrepToStl(...)`
+  - `exportSceneToStl(...)`
+  - `exportCurrentSceneToStl(...)`
+  - wasm return payload includes bytes + report metadata (`OGStlExportResult`)
+- Hardened incoming serialized BREP handling:
+  - `addBrepEntityToScene(...)` now validates topology before storing.
+- Fixed stale half-edge usage in native sandbox:
+  - `main/opengeometry/sandbox-native/src/main.rs` now resolves endpoints via `get_edge_endpoints(...)`.
+- Added Three.js validation examples:
+  - Legacy page: `main/opengeometry-three/examples/stl-export.html`
+  - Vite page: `main/opengeometry-three/examples-vite/operations/stl-export.html`
+  - Vite script: `main/opengeometry-three/examples-vite/src/pages/operations-stl-export.ts`
+  - Vite specs index updated to include STL export card.
+  - Vite STL page now includes a shape dropdown (`Cuboid`, `Cylinder`, `Sphere`, `Wedge`) with per-shape parameter groups and shape-specific STL filenames (`opengeometry-<shape>.stl`).
+  - Vite STL controls were consolidated into a single panel to prevent control container overlap.
+- Exposed STL-related wasm types from package entry:
+  - `main/opengeometry-three/index.ts` now re-exports `OGSceneManager` and `OGStlExportResult`.
+
+## API Summary
+
+- Rust core:
+  - `export_brep_to_stl_bytes(&Brep, &StlExportConfig) -> Result<(Vec<u8>, StlExportReport), StlExportError>`
+  - `export_breps_to_stl_bytes(...) -> Result<(Vec<u8>, StlExportReport), StlExportError>`
+  - `export_brep_to_stl_file(...)` and `export_breps_to_stl_file(...)` for native file output
+- Wasm scenegraph:
+  - `OGSceneManager.exportBrepToStl(brep_serialized, config_json?)`
+  - `OGSceneManager.exportSceneToStl(scene_id, config_json?)`
+  - `OGSceneManager.exportCurrentSceneToStl(config_json?)`
+  - return type: `OGStlExportResult` with:
+    - `bytes: Uint8Array`
+    - `reportJson: string`
+
+## Config Defaults
+
+- Binary STL only.
+- Default policy is best-effort.
+- Units are preserved as-is (`scale: 1.0` by default).
+- Topology validation is enabled by default (`validate_topology: true`).
+
+## How To Test Locally
+
+### Rust quality gates
+
+```bash
+cargo fmt --manifest-path main/opengeometry/Cargo.toml
+cargo check --manifest-path main/opengeometry/Cargo.toml
+cargo test --manifest-path main/opengeometry/Cargo.toml
+cargo test --examples --manifest-path main/opengeometry/Cargo.toml
+cargo check --target wasm32-unknown-unknown --manifest-path main/opengeometry/Cargo.toml
+```
+
+### Native sandbox check
+
+```bash
+cargo check --offline --manifest-path main/opengeometry/sandbox-native/Cargo.toml
+```
+
+Note: online `cargo check` for `sandbox-native` may fail in restricted environments that cannot reach `index.crates.io`.
+
+### Regenerate wasm package and build examples
+
+```bash
+npm run build-core
+npm --prefix main/opengeometry-three run build-example-three
+```
+
+### Run examples
+
+- Legacy page (static host):
+  - `main/opengeometry-three/examples/stl-export.html`
+- Vite built page:
+  - `main/opengeometry-three/examples-dist/operations/stl-export.html`
+  - Use the Shape dropdown and export button to verify shape-specific downloads (`opengeometry-cuboid.stl`, `opengeometry-cylinder.stl`, etc.).
+
+## STL Validation Notes
+
+- Binary STL writer uses `stl_io::write_stl` (spec-compliant binary structure).
+- Unit tests cover:
+  - expected binary size (`84 + 50 * triangle_count`)
+  - triangle count consistency with STL header
+  - custom header injection
+  - best-effort skip behavior and strict failure behavior
+
+## Backward Compatibility
+
+- Existing primitive generation, projection, and PDF APIs remain intact.
+- STL functionality is additive.
+- One behavior hardening change:
+  - serialized BREPs added through scene manager are now topology-validated before insertion.
+
+## Known Caveats / Follow-ups
+
+- Existing non-critical warnings remain:
+  - `operations/windingsort.rs` (`ccw_and_flag` naming)
+  - `geometry/triangle.rs` (`crso` unused variable)
+- `sandbox-native` still has pre-existing `unused_must_use` warnings in some call sites (not introduced by STL work).

main/opengeometry-three/examples-vite/.generated/operations/offset.html

@@ -0,0 +1,12 @@
+<!doctype html>
+<html lang="en">
+  <head>
+    <meta charset="UTF-8" />
+    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
+    <title>OpenGeometry Example</title>
+  </head>
+  <body data-example-slug="operations/offset">
+    <div id="app"></div>
+    <script type="module" src="../../src/example-page.ts"></script>
+  </body>
+</html>

main/opengeometry-three/examples-vite/.generated/operations/sweep-path-profile.html

@@ -0,0 +1,12 @@
+<!doctype html>
+<html lang="en">
+  <head>
+    <meta charset="UTF-8" />
+    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
+    <title>OpenGeometry Example</title>
+  </head>
+  <body data-example-slug="operations/sweep-path-profile">
+    <div id="app"></div>
+    <script type="module" src="../../src/example-page.ts"></script>
+  </body>
+</html>

main/opengeometry-three/examples-vite/.generated/operations/wall-from-offsets.html

@@ -0,0 +1,12 @@
+<!doctype html>
+<html lang="en">
+  <head>
+    <meta charset="UTF-8" />
+    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
+    <title>OpenGeometry Example</title>
+  </head>
+  <body data-example-slug="operations/wall-from-offsets">
+    <div id="app"></div>
+    <script type="module" src="../../src/example-page.ts"></script>
+  </body>
+</html>

main/opengeometry-three/examples-vite/.generated/primitives/arc.html

@@ -0,0 +1,12 @@
+<!doctype html>
+<html lang="en">
+  <head>
+    <meta charset="UTF-8" />
+    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
+    <title>OpenGeometry Example</title>
+  </head>
+  <body data-example-slug="primitives/arc">
+    <div id="app"></div>
+    <script type="module" src="../../src/example-page.ts"></script>
+  </body>
+</html>

main/opengeometry-three/examples-vite/.generated/primitives/curve.html

@@ -0,0 +1,12 @@
+<!doctype html>
+<html lang="en">
+  <head>
+    <meta charset="UTF-8" />
+    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
+    <title>OpenGeometry Example</title>
+  </head>
+  <body data-example-slug="primitives/curve">
+    <div id="app"></div>
+    <script type="module" src="../../src/example-page.ts"></script>
+  </body>
+</html>

main/opengeometry-three/examples-vite/.generated/primitives/line.html

@@ -0,0 +1,12 @@
+<!doctype html>
+<html lang="en">
+  <head>
+    <meta charset="UTF-8" />
+    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
+    <title>OpenGeometry Example</title>
+  </head>
+  <body data-example-slug="primitives/line">
+    <div id="app"></div>
+    <script type="module" src="../../src/example-page.ts"></script>
+  </body>
+</html>

main/opengeometry-three/examples-vite/.generated/primitives/polyline.html

@@ -0,0 +1,12 @@
+<!doctype html>
+<html lang="en">
+  <head>
+    <meta charset="UTF-8" />
+    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
+    <title>OpenGeometry Example</title>
+  </head>
+  <body data-example-slug="primitives/polyline">
+    <div id="app"></div>
+    <script type="module" src="../../src/example-page.ts"></script>
+  </body>
+</html>

main/opengeometry-three/examples-vite/.generated/primitives/rectangle.html

@@ -0,0 +1,12 @@
+<!doctype html>
+<html lang="en">
+  <head>
+    <meta charset="UTF-8" />
+    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
+    <title>OpenGeometry Example</title>
+  </head>
+  <body data-example-slug="primitives/rectangle">
+    <div id="app"></div>
+    <script type="module" src="../../src/example-page.ts"></script>
+  </body>
+</html>

main/opengeometry-three/examples-vite/.generated/shapes/cuboid.html

@@ -0,0 +1,12 @@
+<!doctype html>
+<html lang="en">
+  <head>
+    <meta charset="UTF-8" />
+    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
+    <title>OpenGeometry Example</title>
+  </head>
+  <body data-example-slug="shapes/cuboid">
+    <div id="app"></div>
+    <script type="module" src="../../src/example-page.ts"></script>
+  </body>
+</html>

main/opengeometry-three/examples-vite/.generated/shapes/cylinder.html

@@ -0,0 +1,12 @@
+<!doctype html>
+<html lang="en">
+  <head>
+    <meta charset="UTF-8" />
+    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
+    <title>OpenGeometry Example</title>
+  </head>
+  <body data-example-slug="shapes/cylinder">
+    <div id="app"></div>
+    <script type="module" src="../../src/example-page.ts"></script>
+  </body>
+</html>

main/opengeometry-three/examples-vite/.generated/shapes/opening.html

@@ -0,0 +1,12 @@
+<!doctype html>
+<html lang="en">
+  <head>
+    <meta charset="UTF-8" />
+    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
+    <title>OpenGeometry Example</title>
+  </head>
+  <body data-example-slug="shapes/opening">
+    <div id="app"></div>
+    <script type="module" src="../../src/example-page.ts"></script>
+  </body>
+</html>