This mod of the original Ratrig V-Core 4 vertical tool board mount allows mounting of the O2 tool board from LDO by Robert Lorincz. It retains the same mounting pattern on the VC4 toolhead but requires the 18mm standoff that comes with the O2 tool board to mount (if using the filament sensor). The motor also should be rotated back to the original position, opposite the Ratrig VC4 instructions, in order for the stepper motor cable to reach the connector on the tool board. Clearance is provided for the Orbiter filament sensor also. This model requires (2) M3x4x4.6 brass heatpress inserts, same as used on the Ratrig toolhead.#1
Draft
Artemis-CNC wants to merge 4 commits intoRat-Rig:mainfrom
Draft
This mod of the original Ratrig V-Core 4 vertical tool board mount allows mounting of the O2 tool board from LDO by Robert Lorincz. It retains the same mounting pattern on the VC4 toolhead but requires the 18mm standoff that comes with the O2 tool board to mount (if using the filament sensor). The motor also should be rotated back to the original position, opposite the Ratrig VC4 instructions, in order for the stepper motor cable to reach the connector on the tool board. Clearance is provided for the Orbiter filament sensor also. This model requires (2) M3x4x4.6 brass heatpress inserts, same as used on the Ratrig toolhead.#1Artemis-CNC wants to merge 4 commits intoRat-Rig:mainfrom
Artemis-CNC wants to merge 4 commits intoRat-Rig:mainfrom
Conversation
…lows mounting of the O2 tool board from LDO by Robert Lorincz. It retains the same mounting pattern on the VC4 toolhead but requires the 18mm standoff that comes with the O2 tool board to mount (if using the filament sensor). The motor also should be rotated back to the original position, opposite the Ratrig VC4 instructions, in order for the stepper motor cable to reach the connector on the tool board. Clearance is provided for the Orbiter filament sensor also. This model requires (2) M3x4x4.6 brass heatpress inserts, same as used on the Ratrig toolhead.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.