ci(qemu): 统一 setup 流程并提升测试稳定性 by yoinspiration · Pull Request #363 · arceos-hypervisor/axvisor

yoinspiration · 2026-02-05T06:43:00Z

概述

本 PR 增强了 AxVisor 的 QEMU 测试流程，统一环境准备入口，并提升 CI 对 NimbOS 场景的稳定性与失败可观测性。

主要改动

1) 统一 QEMU 环境准备入口

新增 scripts/setup_qemu.sh，统一支持 arceos / linux / nimbos
自动完成镜像下载、VM 配置 patch、rootfs 准备
移除冗余的旧 wrapper 脚本，减少重复逻辑与维护成本

2) NimbOS x86_64 配置与流程对齐

configs/vms/nimbos-x86_64-qemu-smp1.toml 对齐镜像下载目录
使用 image_location = "memory"，从宿主机镜像目录加载 kernel
CI 中自动下载并配置 axvm-bios.bin 以满足 NimbOS 引导要求

3) CI 失败检测增强

在 qemu-aarch64.toml 增加 fail_regex（如 panicked at），更早暴露 guest panic

4) NimbOS CI 自动输入与退出码修复

scripts/ci_run_qemu_nimbos.py 使用 PTY 启动子进程，确保输入可正确传递
检测到 shell 提示后自动发送 usertests
检测到 usertests passed! 后返回 0，避免“成功后主动终止 QEMU”导致 CI 误报失败

支持的测试组合

架构	Guest 系统	成功标志	特殊要求
aarch64	ArceOS	`Hello, world!`	-
aarch64	Linux	`test pass!`	-
x86_64	NimbOS	`usertests passed!`	Intel VT-x/KVM

测试结果

✅ 本地验证 setup_qemu.sh 在 ArceOS / Linux / NimbOS 三类 Guest 的环境准备流程可执行
✅ NimbOS CI 自动输入可触发 usertests
✅ NimbOS 成功标志命中后退出码已修正，不再出现“测试通过但 Job 失败”误报
✅ CI 配置更新已生效（含 fail_regex）

Out of Scope / Known Issues

⚠️ PhytiumPi 实机曾出现 EXT4-fs error / No working init found，更偏向实验环境 SD 卡 / rootfs 镜像问题；当前未在本 PR 改动路径中复现，后续单独跟进。

检查清单

本地测试通过（覆盖本 PR 改动路径）
文档与脚本说明已更新
CI 配置已更新

- switch x86_64 qemu to TCG with generic cpu - adjust linux and nimbos VM kernel image paths for qemu tests - refresh Cargo.lock after dependency updates

- 上游 https://github.com/YanQD/phytium-mci 仓库已删除 (Repository not found) - 注释 modules/driver 中的 phytium-blk 功能及 phytium-mci 依赖 - 更新 configs/board/phytiumpi.toml 禁用 phytium-blk - 从 Cargo.lock 移除 phytium-mci - 添加 .cargo/config.toml 中 git-fetch-with-cli 配置 Phytium Pi 板卡构建暂不可用，QEMU aarch64 等场景可正常使用 Co-authored-by: Cursor <cursoragent@cursor.com>

- Add setup_qemu_linux.sh: prepare Linux guest for aarch64 QEMU test - Add setup_qemu_nimbos.sh: prepare NimbOS guest for x86_64 QEMU test - Inject kernel into rootfs for image_location=fs mode - Support mount/guestmount for rootfs modification - Add qemu-x86_64-kvm.toml: KVM config for VT-x capable hosts - Use -accel kvm -cpu host for hardware virtualization Co-authored-by: Cursor <cursoragent@cursor.com>

- 新增 setup_qemu.sh 统一入口，支持 --guest arceos|linux|nimbos - 原 setup_qemu_*.sh 改为调用统一脚本的包装 - 简化多 Guest 环境准备流程 Co-authored-by: Cursor <cursoragent@cursor.com>

Align with uboot.toml, detect 'panicked at' as failure pattern. Co-authored-by: Cursor <cursoragent@cursor.com>

- 恢复 modules/driver 中 phytium-mci 依赖（使用 crates.io v0.1.1） - 恢复 phytiumpi 板级配置中的 driver/phytium-blk - 原 git 仓库已不可用，改为 crates.io 发布版本 Co-authored-by: Cursor <cursoragent@cursor.com>

Co-authored-by: Cursor <cursoragent@cursor.com>

- point nimbos kernel_path to xtask image extract directory - simplify setup_qemu.sh to stop injecting kernel into rootfs - make nimbos config and setup script consistent with image_location=memory Co-authored-by: Cursor <cursoragent@cursor.com>

NimbOS x86_64 requires axvm-bios at 0x8000 to bootstrap the guest. Revert the incorrect removal in ab5d1d8 that assumed QEMU's default BIOS would run inside the nested guest (it does not). - Restore bios_path and bios_load_addr in nimbos-x86_64-qemu-smp1.toml - Add axvm-bios.bin download in setup_qemu.sh for nimbos - Add axvm-bios download in CI test-qemu workflow for x86_64 nimbos Co-authored-by: Cursor <cursoragent@cursor.com>

- Add scripts/ci_run_qemu_nimbos.py to automatically send 'usertests' command when 'Rust user shell' appears, so CI doesn't hang waiting for input - Update test-qemu.yml to use the wrapper script only for NimbOS tests - Other guests (ArceOS, Linux) continue to run directly without wrapper Co-authored-by: Cursor <cursoragent@cursor.com>

Replace subprocess.PIPE with pty so the child sees a real TTY. With PIPE the child may treat stdin as non-interactive and not forward input to QEMU, causing CI to hang waiting for 'usertests' input. Also add fallback trigger '>>' in addition to 'Rust user shell'. Co-authored-by: Cursor <cursoragent@cursor.com>

setup_qemu.sh already supports direct guest argument, making the per-guest wrappers unnecessary. Co-authored-by: Cursor <cursoragent@cursor.com>

Add bilingual documentation covering environment setup, Rust toolchain installation, KVM configuration, and running guest OSes on QEMU. Co-authored-by: Cursor <cursoragent@cursor.com>

Return zero when `usertests passed!` is detected so CI doesn't fail when QEMU is intentionally terminated after success pattern matching. Co-authored-by: Cursor <cursoragent@cursor.com>

yoinspiration · 2026-02-26T09:02:59Z

CI 在 cargo xtask image download qemu_aarch64_linux 步骤访问
https://raw.githubusercontent.com/arceos-hypervisor/axvisor-guest/refs/heads/main/registry/default.toml 超时，看起来是 CI runner 的网络问题，与本 PR 改动无关。
本地构建与相关测试已通过，麻烦维护者帮忙看下 CI 网络或考虑在 CI 中预置 /tmp/.axvisor-images。

Made-with: Cursor

Adjust U-Boot CI success regex to match the full Phytium Pi welcome banner instead of the generic board string, preventing premature success while still letting Linux boots finish promptly. Made-with: Cursor

Made-with: Cursor

Clarify that NimbOS requires VT-x/VMX and KVM, and can also run on WSL2 when KVM is available (e.g. Intel CPUs with nested virtualization enabled). Made-with: Cursor

ZR233 · 2026-02-27T09:20:12Z

飞腾派镜像存在问题，正在修复

Wrap cargo xtask uboot in script -q -c ... so ostool gets a TTY and crossterm can initialize (avoids 'reader source not set' panic when running without interactive terminal). Made-with: Cursor

Improve setup_qemu.sh resilience for flaky GitHub Raw access by adding registry bootstrap fallback, clearer retry logs, and centralized registry constants. Update EN/CN quickstart troubleshooting with timeout recovery and fallback override guidance. Made-with: Cursor

Avoid mutating tracked VM config templates by generating per-guest vmconfigs under tmp/vmconfigs and patching paths there. Update EN/CN quickstart commands and setup flow docs to use generated vmconfig files. Made-with: Cursor

Align uboot workflow success detection with upstream Phytium Pi boot banner. Made-with: Cursor

* chore(scripts): add qemu arceos setup helper * chore(qemu): update qemu configs and VM images - switch x86_64 qemu to TCG with generic cpu - adjust linux and nimbos VM kernel image paths for qemu tests - refresh Cargo.lock after dependency updates * fix: 禁用 phytium-mci 依赖以解决上游仓库不可用问题 - 上游 https://github.com/YanQD/phytium-mci 仓库已删除 (Repository not found) - 注释 modules/driver 中的 phytium-blk 功能及 phytium-mci 依赖 - 更新 configs/board/phytiumpi.toml 禁用 phytium-blk - 从 Cargo.lock 移除 phytium-mci - 添加 .cargo/config.toml 中 git-fetch-with-cli 配置 Phytium Pi 板卡构建暂不可用，QEMU aarch64 等场景可正常使用 Co-authored-by: Cursor <cursoragent@cursor.com> * feat(qemu): add setup scripts and KVM config for QEMU testing - Add setup_qemu_linux.sh: prepare Linux guest for aarch64 QEMU test - Add setup_qemu_nimbos.sh: prepare NimbOS guest for x86_64 QEMU test - Inject kernel into rootfs for image_location=fs mode - Support mount/guestmount for rootfs modification - Add qemu-x86_64-kvm.toml: KVM config for VT-x capable hosts - Use -accel kvm -cpu host for hardware virtualization Co-authored-by: Cursor <cursoragent@cursor.com> * scripts: 统一 setup_qemu 脚本用法 - 新增 setup_qemu.sh 统一入口，支持 --guest arceos|linux|nimbos - 原 setup_qemu_*.sh 改为调用统一脚本的包装 - 简化多 Guest 环境准备流程 Co-authored-by: Cursor <cursoragent@cursor.com> * ci: add fail_regex for qemu-aarch64 to detect panic Align with uboot.toml, detect 'panicked at' as failure pattern. Co-authored-by: Cursor <cursoragent@cursor.com> * restore phytium-mci: 改用 crates.io 版本恢复 Phytium Pi 构建支持 - 恢复 modules/driver 中 phytium-mci 依赖（使用 crates.io v0.1.1） - 恢复 phytiumpi 板级配置中的 driver/phytium-blk - 原 git 仓库已不可用，改为 crates.io 发布版本 Co-authored-by: Cursor <cursoragent@cursor.com> * ci(qemu-x86_64): use kvm accel only for nested virt Co-authored-by: Cursor <cursoragent@cursor.com> * ci(qemu-x86_64): align nimbos vmconfig with image downloader Co-authored-by: Cursor <cursoragent@cursor.com> * ci(qemu-x86_64): load nimbos kernel from memory without BIOS Co-authored-by: Cursor <cursoragent@cursor.com> * ci(qemu-x86_64): load nimbos kernel from host image dir - point nimbos kernel_path to xtask image extract directory - simplify setup_qemu.sh to stop injecting kernel into rootfs - make nimbos config and setup script consistent with image_location=memory Co-authored-by: Cursor <cursoragent@cursor.com> * fix(nimbos-x86_64): restore axvm-bios for bootstrapping NimbOS x86_64 requires axvm-bios at 0x8000 to bootstrap the guest. Revert the incorrect removal in ab5d1d8 that assumed QEMU's default BIOS would run inside the nested guest (it does not). - Restore bios_path and bios_load_addr in nimbos-x86_64-qemu-smp1.toml - Add axvm-bios.bin download in setup_qemu.sh for nimbos - Add axvm-bios download in CI test-qemu workflow for x86_64 nimbos Co-authored-by: Cursor <cursoragent@cursor.com> * ci(qemu-x86_64): add auto-input script for NimbOS usertests - Add scripts/ci_run_qemu_nimbos.py to automatically send 'usertests' command when 'Rust user shell' appears, so CI doesn't hang waiting for input - Update test-qemu.yml to use the wrapper script only for NimbOS tests - Other guests (ArceOS, Linux) continue to run directly without wrapper Co-authored-by: Cursor <cursoragent@cursor.com> * fix(ci): use PTY for NimbOS auto-input to fix stdin not reaching QEMU Replace subprocess.PIPE with pty so the child sees a real TTY. With PIPE the child may treat stdin as non-interactive and not forward input to QEMU, causing CI to hang waiting for 'usertests' input. Also add fallback trigger '>>' in addition to 'Rust user shell'. Co-authored-by: Cursor <cursoragent@cursor.com> * chore(scripts): remove redundant wrapper scripts setup_qemu.sh already supports direct guest argument, making the per-guest wrappers unnecessary. Co-authored-by: Cursor <cursoragent@cursor.com> * docs: add QEMU quickstart guide (EN/CN) and link from READMEs Add bilingual documentation covering environment setup, Rust toolchain installation, KVM configuration, and running guest OSes on QEMU. Co-authored-by: Cursor <cursoragent@cursor.com> * fix(ci): treat NimbOS success marker as passing Return zero when `usertests passed!` is detected so CI doesn't fail when QEMU is intentionally terminated after success pattern matching. Co-authored-by: Cursor <cursoragent@cursor.com> * fix(qemu-nimbos): avoid duplicate BIOS download Made-with: Cursor * fix(board-ci): treat Phytium boot banner as success Made-with: Cursor * fix(board-ci): refine Phytium Pi success marker Adjust U-Boot CI success regex to match the full Phytium Pi welcome banner instead of the generic board string, preventing premature success while still letting Linux boots finish promptly. Made-with: Cursor * chore(ci): trigger board test Made-with: Cursor * fix(qemu-nimbos): clarify kvm requirement Clarify that NimbOS requires VT-x/VMX and KVM, and can also run on WSL2 when KVM is available (e.g. Intel CPUs with nested virtualization enabled). Made-with: Cursor * ci(board): use script PTY for uboot test to fix crossterm panic in CI Wrap cargo xtask uboot in script -q -c ... so ostool gets a TTY and crossterm can initialize (avoids 'reader source not set' panic when running without interactive terminal). Made-with: Cursor * fix(qemu): harden setup_qemu registry bootstrap and retries Improve setup_qemu.sh resilience for flaky GitHub Raw access by adding registry bootstrap fallback, clearer retry logs, and centralized registry constants. Update EN/CN quickstart troubleshooting with timeout recovery and fallback override guidance. Made-with: Cursor * fix(qemu): generate temporary vmconfigs in setup script Avoid mutating tracked VM config templates by generating per-guest vmconfigs under tmp/vmconfigs and patching paths there. Update EN/CN quickstart commands and setup flow docs to use generated vmconfig files. Made-with: Cursor * ci(uboot): update Phytium Pi success regex Align uboot workflow success detection with upstream Phytium Pi boot banner. Made-with: Cursor --------- Co-authored-by: Cursor <cursoragent@cursor.com>

* ci: add comprehensive CI workflows for check, deploy, and release * chore: reorder imports in xtask image registry * ci: skip build step in check workflow * ci: remove unused custom actions for guest image and QEMU setup * ci: support preview tag in release workflow * refactor: inline vm_fdt module and remove unused components - Move vm_fdt crate as a submodule under kernel/src/vmm/fdt/ - Remove deprecated modules: axconfig, axfs, axruntime - Remove x86-qemu-q35 platform support - Update dependencies from git sources to crates.io registry This consolidates the vm_fdt functionality directly into the kernel codebase and removes obsolete modules that are no longer needed. * style: reorder imports and fix missing newline * chore: exclude xtask from workspace members and update Cargo.lock * chore: remove all-features flag from clippy check * chore: decouple xtask from workspace dependencies * Update dependencies and board configurations for axruntime support * fix: correct spelling of 'axruntime' in board configuration files * Enhance kernel functionality and code quality * fix: refine feature flags for rk3588 and rk3568 clock modules * docs: add module documentation for Axvisor Driver Module * docs: enhance documentation for Axvisor kernel and fix comments in device parsing * restruct axvisor code organization (#374) * feat: restruct axvisor * refactor: remove unnecessary blank lines in driver files and workflow * fix: fix dirver feature about phytiumpi and rk3568 * version: publish 0.1.0-preview.2 * version: publish axvisor-build (xtask) 0.1.0-preview.2 * fix: rename xtask to axvisor-build and publish 0.1.0-preview.3 * merge xtask into axvisor (#376) * fix: merge xtask into axvisor * version: publish 0.1.0-preview.4 * upgrade to ArceOS 0.3.0-preview.2 and refactor dependencies * chore: remove `autobins` config from Cargo.toml * feat: enable shell console initialization * fix: resolve cargo doc build errors * ci(qemu): 统一 setup 流程并提升测试稳定性 (#363) * chore(scripts): add qemu arceos setup helper * chore(qemu): update qemu configs and VM images - switch x86_64 qemu to TCG with generic cpu - adjust linux and nimbos VM kernel image paths for qemu tests - refresh Cargo.lock after dependency updates * fix: 禁用 phytium-mci 依赖以解决上游仓库不可用问题 - 上游 https://github.com/YanQD/phytium-mci 仓库已删除 (Repository not found) - 注释 modules/driver 中的 phytium-blk 功能及 phytium-mci 依赖 - 更新 configs/board/phytiumpi.toml 禁用 phytium-blk - 从 Cargo.lock 移除 phytium-mci - 添加 .cargo/config.toml 中 git-fetch-with-cli 配置 Phytium Pi 板卡构建暂不可用，QEMU aarch64 等场景可正常使用 Co-authored-by: Cursor <cursoragent@cursor.com> * feat(qemu): add setup scripts and KVM config for QEMU testing - Add setup_qemu_linux.sh: prepare Linux guest for aarch64 QEMU test - Add setup_qemu_nimbos.sh: prepare NimbOS guest for x86_64 QEMU test - Inject kernel into rootfs for image_location=fs mode - Support mount/guestmount for rootfs modification - Add qemu-x86_64-kvm.toml: KVM config for VT-x capable hosts - Use -accel kvm -cpu host for hardware virtualization Co-authored-by: Cursor <cursoragent@cursor.com> * scripts: 统一 setup_qemu 脚本用法 - 新增 setup_qemu.sh 统一入口，支持 --guest arceos|linux|nimbos - 原 setup_qemu_*.sh 改为调用统一脚本的包装 - 简化多 Guest 环境准备流程 Co-authored-by: Cursor <cursoragent@cursor.com> * ci: add fail_regex for qemu-aarch64 to detect panic Align with uboot.toml, detect 'panicked at' as failure pattern. Co-authored-by: Cursor <cursoragent@cursor.com> * restore phytium-mci: 改用 crates.io 版本恢复 Phytium Pi 构建支持 - 恢复 modules/driver 中 phytium-mci 依赖（使用 crates.io v0.1.1） - 恢复 phytiumpi 板级配置中的 driver/phytium-blk - 原 git 仓库已不可用，改为 crates.io 发布版本 Co-authored-by: Cursor <cursoragent@cursor.com> * ci(qemu-x86_64): use kvm accel only for nested virt Co-authored-by: Cursor <cursoragent@cursor.com> * ci(qemu-x86_64): align nimbos vmconfig with image downloader Co-authored-by: Cursor <cursoragent@cursor.com> * ci(qemu-x86_64): load nimbos kernel from memory without BIOS Co-authored-by: Cursor <cursoragent@cursor.com> * ci(qemu-x86_64): load nimbos kernel from host image dir - point nimbos kernel_path to xtask image extract directory - simplify setup_qemu.sh to stop injecting kernel into rootfs - make nimbos config and setup script consistent with image_location=memory Co-authored-by: Cursor <cursoragent@cursor.com> * fix(nimbos-x86_64): restore axvm-bios for bootstrapping NimbOS x86_64 requires axvm-bios at 0x8000 to bootstrap the guest. Revert the incorrect removal in ab5d1d8 that assumed QEMU's default BIOS would run inside the nested guest (it does not). - Restore bios_path and bios_load_addr in nimbos-x86_64-qemu-smp1.toml - Add axvm-bios.bin download in setup_qemu.sh for nimbos - Add axvm-bios download in CI test-qemu workflow for x86_64 nimbos Co-authored-by: Cursor <cursoragent@cursor.com> * ci(qemu-x86_64): add auto-input script for NimbOS usertests - Add scripts/ci_run_qemu_nimbos.py to automatically send 'usertests' command when 'Rust user shell' appears, so CI doesn't hang waiting for input - Update test-qemu.yml to use the wrapper script only for NimbOS tests - Other guests (ArceOS, Linux) continue to run directly without wrapper Co-authored-by: Cursor <cursoragent@cursor.com> * fix(ci): use PTY for NimbOS auto-input to fix stdin not reaching QEMU Replace subprocess.PIPE with pty so the child sees a real TTY. With PIPE the child may treat stdin as non-interactive and not forward input to QEMU, causing CI to hang waiting for 'usertests' input. Also add fallback trigger '>>' in addition to 'Rust user shell'. Co-authored-by: Cursor <cursoragent@cursor.com> * chore(scripts): remove redundant wrapper scripts setup_qemu.sh already supports direct guest argument, making the per-guest wrappers unnecessary. Co-authored-by: Cursor <cursoragent@cursor.com> * docs: add QEMU quickstart guide (EN/CN) and link from READMEs Add bilingual documentation covering environment setup, Rust toolchain installation, KVM configuration, and running guest OSes on QEMU. Co-authored-by: Cursor <cursoragent@cursor.com> * fix(ci): treat NimbOS success marker as passing Return zero when `usertests passed!` is detected so CI doesn't fail when QEMU is intentionally terminated after success pattern matching. Co-authored-by: Cursor <cursoragent@cursor.com> * fix(qemu-nimbos): avoid duplicate BIOS download Made-with: Cursor * fix(board-ci): treat Phytium boot banner as success Made-with: Cursor * fix(board-ci): refine Phytium Pi success marker Adjust U-Boot CI success regex to match the full Phytium Pi welcome banner instead of the generic board string, preventing premature success while still letting Linux boots finish promptly. Made-with: Cursor * chore(ci): trigger board test Made-with: Cursor * fix(qemu-nimbos): clarify kvm requirement Clarify that NimbOS requires VT-x/VMX and KVM, and can also run on WSL2 when KVM is available (e.g. Intel CPUs with nested virtualization enabled). Made-with: Cursor * ci(board): use script PTY for uboot test to fix crossterm panic in CI Wrap cargo xtask uboot in script -q -c ... so ostool gets a TTY and crossterm can initialize (avoids 'reader source not set' panic when running without interactive terminal). Made-with: Cursor * fix(qemu): harden setup_qemu registry bootstrap and retries Improve setup_qemu.sh resilience for flaky GitHub Raw access by adding registry bootstrap fallback, clearer retry logs, and centralized registry constants. Update EN/CN quickstart troubleshooting with timeout recovery and fallback override guidance. Made-with: Cursor * fix(qemu): generate temporary vmconfigs in setup script Avoid mutating tracked VM config templates by generating per-guest vmconfigs under tmp/vmconfigs and patching paths there. Update EN/CN quickstart commands and setup flow docs to use generated vmconfig files. Made-with: Cursor * ci(uboot): update Phytium Pi success regex Align uboot workflow success detection with upstream Phytium Pi boot banner. Made-with: Cursor --------- Co-authored-by: Cursor <cursoragent@cursor.com> * ci: update Phytium success regex in uboot workflow (#370) --------- Co-authored-by: ZCShou <72115@163.com> Co-authored-by: Josen-B <65878371+Josen-B@users.noreply.github.com> Co-authored-by: yoinspiration <92397019+yoinspiration@users.noreply.github.com> Co-authored-by: Cursor <cursoragent@cursor.com>

ZR233 requested changes Feb 6, 2026

View reviewed changes

Comment thread modules/driver/Cargo.toml Outdated

yoinspiration requested a review from ZR233 February 6, 2026 22:41

yoinspiration force-pushed the dev/qemu-test-enhancement branch from 20756b2 to 37ae893 Compare February 6, 2026 22:49

ZR233 requested changes Feb 9, 2026

View reviewed changes

Comment thread .github/workflows/qemu-x86_64.toml Outdated

yoinspiration requested a review from ZR233 February 9, 2026 13:24

yoinspiration and others added 13 commits February 15, 2026 07:07

chore(scripts): add qemu arceos setup helper

c3123d5

chore(qemu): update qemu configs and VM images

0401570

- switch x86_64 qemu to TCG with generic cpu - adjust linux and nimbos VM kernel image paths for qemu tests - refresh Cargo.lock after dependency updates

scripts: 统一 setup_qemu 脚本用法

c1c47ac

- 新增 setup_qemu.sh 统一入口，支持 --guest arceos|linux|nimbos - 原 setup_qemu_*.sh 改为调用统一脚本的包装 - 简化多 Guest 环境准备流程 Co-authored-by: Cursor <cursoragent@cursor.com>

ci: add fail_regex for qemu-aarch64 to detect panic

ebbd625

Align with uboot.toml, detect 'panicked at' as failure pattern. Co-authored-by: Cursor <cursoragent@cursor.com>

ci(qemu-x86_64): use kvm accel only for nested virt

16e09f0

Co-authored-by: Cursor <cursoragent@cursor.com>

ci(qemu-x86_64): align nimbos vmconfig with image downloader

a7f5c07

Co-authored-by: Cursor <cursoragent@cursor.com>

ci(qemu-x86_64): load nimbos kernel from memory without BIOS

e380d97

Co-authored-by: Cursor <cursoragent@cursor.com>

yoinspiration force-pushed the dev/qemu-test-enhancement branch from 3c598ee to 9b83866 Compare February 15, 2026 01:57

yoinspiration and others added 4 commits February 15, 2026 17:18

chore(scripts): remove redundant wrapper scripts

9603f61

setup_qemu.sh already supports direct guest argument, making the per-guest wrappers unnecessary. Co-authored-by: Cursor <cursoragent@cursor.com>

docs: add QEMU quickstart guide (EN/CN) and link from READMEs

80b1c5e

Add bilingual documentation covering environment setup, Rust toolchain installation, KVM configuration, and running guest OSes on QEMU. Co-authored-by: Cursor <cursoragent@cursor.com>

fix(ci): treat NimbOS success marker as passing

988f37a

Return zero when `usertests passed!` is detected so CI doesn't fail when QEMU is intentionally terminated after success pattern matching. Co-authored-by: Cursor <cursoragent@cursor.com>

yoinspiration changed the title ~~feat: QEMU 测试环境增强 - 统一 setup 脚本和 CI 改进~~ ci(qemu): 统一 setup 流程并提升测试稳定性 Feb 24, 2026

ZR233 requested changes Feb 26, 2026

View reviewed changes

Comment thread scripts/setup_qemu.sh

yoinspiration added 2 commits February 26, 2026 22:37

fix(qemu-nimbos): avoid duplicate BIOS download

1a2132a

Made-with: Cursor

fix(board-ci): treat Phytium boot banner as success

2b10cd5

Made-with: Cursor

yoinspiration requested a review from ZR233 February 26, 2026 14:46

ZR233 requested changes Feb 27, 2026

View reviewed changes

Comment thread .github/workflows/uboot.toml Outdated

fix(board-ci): refine Phytium Pi success marker

5fb78f1

Adjust U-Boot CI success regex to match the full Phytium Pi welcome banner instead of the generic board string, preventing premature success while still letting Linux boots finish promptly. Made-with: Cursor

yoinspiration requested a review from ZR233 February 27, 2026 06:32

yoinspiration added 2 commits February 27, 2026 16:01

chore(ci): trigger board test

ec9c7a1

Made-with: Cursor

fix(qemu-nimbos): clarify kvm requirement

796213a

Clarify that NimbOS requires VT-x/VMX and KVM, and can also run on WSL2 when KVM is available (e.g. Intel CPUs with nested virtualization enabled). Made-with: Cursor

ZR233 previously approved these changes Feb 27, 2026

View reviewed changes

ci(board): use script PTY for uboot test to fix crossterm panic in CI

5c807a8

Wrap cargo xtask uboot in script -q -c ... so ostool gets a TTY and crossterm can initialize (avoids 'reader source not set' panic when running without interactive terminal). Made-with: Cursor

yoinspiration dismissed ZR233’s stale review via 5c807a8 February 28, 2026 02:32

yoinspiration requested a review from ZR233 March 1, 2026 05:45

yoinspiration added 2 commits March 1, 2026 14:14

fix(qemu): generate temporary vmconfigs in setup script

ebcc249

Avoid mutating tracked VM config templates by generating per-guest vmconfigs under tmp/vmconfigs and patching paths there. Update EN/CN quickstart commands and setup flow docs to use generated vmconfig files. Made-with: Cursor

ZR233 requested changes Mar 3, 2026

View reviewed changes

Comment thread .github/workflows/uboot.toml Outdated

ci(uboot): update Phytium Pi success regex

913cce0

Align uboot workflow success detection with upstream Phytium Pi boot banner. Made-with: Cursor

yoinspiration requested a review from ZR233 March 5, 2026 06:00

ZR233 approved these changes Mar 5, 2026

View reviewed changes

ZR233 merged commit 09a79ff into arceos-hypervisor:master Mar 5, 2026
13 of 15 checks passed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

ci(qemu): 统一 setup 流程并提升测试稳定性#363

ci(qemu): 统一 setup 流程并提升测试稳定性#363
ZR233 merged 26 commits intoarceos-hypervisor:masterfrom
yoinspiration:dev/qemu-test-enhancement

yoinspiration commented Feb 5, 2026 •

edited

Loading

Uh oh!

Uh oh!

Uh oh!

yoinspiration commented Feb 26, 2026

Uh oh!

Uh oh!

Uh oh!

ZR233 commented Feb 27, 2026

Uh oh!

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Conversation

yoinspiration commented Feb 5, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

概述

主要改动

1) 统一 QEMU 环境准备入口

2) NimbOS x86_64 配置与流程对齐

3) CI 失败检测增强

4) NimbOS CI 自动输入与退出码修复

支持的测试组合

测试结果

Out of Scope / Known Issues

检查清单

Uh oh!

Uh oh!

Uh oh!

yoinspiration commented Feb 26, 2026

Uh oh!

Uh oh!

Uh oh!

ZR233 commented Feb 27, 2026

Uh oh!

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

yoinspiration commented Feb 5, 2026 •

edited

Loading