bug fixes and cmake version improvements

.github/workflows/cmake.yml

@@ -1,29 +1,24 @@
-name: Build C++ Project
-
-on: [push]
-
+name: Build and Test
+on: [push, pull_request]
 jobs:
   build:
-    name: Build on Ubuntu with GCC
-    runs-on: ubuntu-latest # For Gitea, ensure you have a runner with the 'ubuntu-latest' label
-
-    # Environment variables for the C/C++ compiler
-    env:
-      CC: gcc
-      CXX: g++
-
+    runs-on: ubuntu-latest
+    strategy:
+      matrix: {compiler: [gcc, clang], build_type: [Release, Debug]}
     steps:
-      # Step 1: Check out the repository code
-      - name: Checkout repository
-        uses: actions/checkout@v4 # Updated to the latest version for best practice
-        # Note for Gitea: Ensure your instance can access this action or use a native 'git clone' command.
-
-      # Step 2: Configure the project and build it
-      - name: Configure and Build
-        run: |
-          # Configure using CMake. The -B flag creates the 'build' directory.
-          # The build type is now hardcoded to 'Debug'.
-          cmake -B build -DCMAKE_BUILD_TYPE=Debug -DCMAKE_VERBOSE_MAKEFILE=ON .
-
-          # Build the project using the generated configuration.
-          cmake --build build --config Debug
+      - uses: actions/checkout@v4
+      - name: Install deps
+        run: sudo apt-get update && sudo apt-get install -y build-essential cmake
+      - name: Configure
+        run: cmake -S . -B build -DCMAKE_BUILD_TYPE=${{ matrix.build_type }}
+      - name: Build
+        run: cmake --build build -j
+      - name: Run tests
+        run: ctest --output-on-failure -C ${{ matrix.build_type }} -V
+  sanitize:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - run: cmake -S . -B build -DCMAKE_BUILD_TYPE=Debug -DCMAKE_CXX_FLAGS="-fsanitize=address,undefined -fno-omit-frame-pointer"
+      - run: cmake --build build -j
+      - run: ctest --output-on-failure -C Debug -V

.gitignore

@@ -36,3 +36,4 @@
 cmake-build-debug
 build
 .vscode
+.cache

CMakeLists.txt

@@ -1,53 +1,54 @@
-cmake_minimum_required(VERSION 3.1)
+cmake_minimum_required(VERSION 3.30)
 project(blowfish VERSION 1.0.0 LANGUAGES CXX)
 
+message(STATUS "CMake version: ${CMAKE_VERSION}")
+message(STATUS "Project version: ${PROJECT_VERSION}")
 
-if (NOT CMAKE_CXX_STANDARD)
-    set(CMAKE_CXX_STANDARD 14)
-elseif (CMAKE_CXX_STANDARD LESS 11)
-    message(WARNING "CMAKE_CXX_STANDARD has been set to '${CMAKE_CXX_STANDARD}' which is lower than the minimum required standard (c++14).")
-endif ()
+# ===== compiler settings =====
+set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
 
-message(STATUS "Using C++ standard c++${CMAKE_CXX_STANDARD}")
+set(CMAKE_CXX_STANDARD 17)
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
+message(STATUS "Using C++ standard c++${CMAKE_CXX_STANDARD}")
 
-message (STATUS "CMake version: ${CMAKE_VERSION}")
-message (STATUS "Project version: ${PROJECT_VERSION}")
-
-set(BLOWFISH_SRC ${PROJECT_SOURCE_DIR}/src/blowfish.cc)
-set(BLOWFISH2_SRC ${PROJECT_SOURCE_DIR}/src/blowfish2.cc)
-source_group(src FILES ${BLOWFISH_SRC} ${BLOWFISH2_SRC})
-
-set(BLOWFISH_TEST ${PROJECT_SOURCE_DIR}/tests/Main.cpp)
-set(BLOWFISH2_TEST ${PROJECT_SOURCE_DIR}/tests/Main2.cpp)
-source_group(tests FILES ${BLOWFISH_TEST} ${BLOWFISH2_TEST})
+set(BF_INCLUDE_DIR ${PROJECT_SOURCE_DIR}/include)
 
-set(BLOWFISH_INC ${PROJECT_SOURCE_DIR}/include/blowfish/blowfish.h)
-set(BLOWFISH2_INC ${PROJECT_SOURCE_DIR}/include/blowfish/blowfish2.h)
-source_group(include FILES ${BLOWFISH_INC} ${BLOWFISH2_INC})
+# ===== blowfish library =====
+add_library(blowfish)
+target_compile_features(blowfish PUBLIC cxx_std_17)
 
-set(BLOWFISH_DOC 
-    README.md
-    LICENSE
+target_sources(blowfish
+    PRIVATE
+        src/blowfish.cc
+    PUBLIC FILE_SET HEADERS
+        BASE_DIRS ${BF_INCLUDE_DIR}
+        FILES include/blowfish/blowfish.h
 )
-source_group(doc FILES ${BLOWFISH_DOC})
 
-set(BLOWFISH_SCRIPTS
-    .gitattributes
-    .gitignore
-    build.sh
-)
-source_group(scripts FILES ${BLOWFISH_SCRIPTS})
+target_include_directories(blowfish PUBLIC ${BF_INCLUDE_DIR})
 
-add_library(blowfish ${BLOWFISH_SRC} ${BLOWFISH_INC} ${BLOWFISH_SCRIPTS} ${BLOWFISH_DOC})
-add_library(blowfish2 ${BLOWFISH2_SRC} ${BLOWFISH2_INC} ${BLOWFISH_SCRIPTS} ${BLOWFISH_DOC})
+# ===== blowfish2 library =====
+add_library(blowfish2)
+target_compile_features(blowfish2 PUBLIC cxx_std_14)
 
-target_include_directories(blowfish PUBLIC ${PROJECT_SOURCE_DIR}/include)
-target_include_directories(blowfish2 PUBLIC ${PROJECT_SOURCE_DIR}/include)
+target_sources(blowfish2
+    PRIVATE
+        src/blowfish2.cc
+    PUBLIC FILE_SET HEADERS
+        BASE_DIRS ${BF_INCLUDE_DIR}
+        FILES include/blowfish/blowfish2.h
+)
 
-add_executable(bf_test ${BLOWFISH_TEST} ${BLOWFISH_SRC} ${BLOWFISH_INC})
-add_executable(bf2_test ${BLOWFISH2_TEST} ${BLOWFISH2_SRC} ${BLOWFISH2_INC})
+target_include_directories(blowfish2 PUBLIC ${BF_INCLUDE_DIR})
 
-target_include_directories(bf_test PUBLIC ${PROJECT_SOURCE_DIR}/include)
-target_include_directories(bf2_test PUBLIC ${PROJECT_SOURCE_DIR}/include)
+# ===== Tests =====
+include(CTest)
+if(BUILD_TESTING)
+    add_executable(bf_test tests/Main.cpp)
+    target_link_libraries(bf_test PRIVATE blowfish)
+    add_test(NAME bf_test COMMAND bf_test)
 
+    add_executable(bf2_test tests/Main2.cpp)
+    target_link_libraries(bf2_test PRIVATE blowfish2)
+    add_test(NAME bf2_test COMMAND bf2_test)
+endif()

README.md

@@ -1,29 +1,68 @@
 # Blowfish and Blowfish2 Encryption Algorithm
 
-<p align=center><a href="https://github.com/avinal/blowfish/actions"><img alt="build" src="https://github.com/avinal/blowfish/workflows/build/badge.svg?branch=main"></a><a href="https://github.com/avinal/blowfish/blob/main/LICENSE"><img src="https://img.shields.io/github/license/avinal/blowfish" alt="license"></a></p>
+[![Build Status](https://github.com/avinal/blowfish/actions/workflows/cmake.yml/badge.svg)](https://github.com/avinal/blowfish/actions/workflows/cmake.yml)
 
-Blowfish is a symmetric block cipher that can be used as a drop-in replacement for DES or IDEA. It takes a variable-length key, from 32 bits to 448 bits, making it ideal for both domestic and exportable use. Blowfish was designed in 1993 by Bruce Schneier as a fast, free alternative to existing encryption algorithms. Since then it has been analyzed considerably, and it is slowly gaining acceptance as a strong encryption algorithm. Blowfish is unpatented and license-free, and is available free for all uses.
+Blowfish is a symmetric block cipher that can be used as a drop-in replacement for DES or IDEA. It
+takes a variable-length key, from 32 bits to 448 bits, making it ideal for both domestic and
+exportable use. Blowfish was designed in 1993 by Bruce Schneier as a fast, free alternative to
+existing encryption algorithms. Since then it has been analyzed considerably, and it is slowly
+gaining acceptance as a strong encryption algorithm. Blowfish is not patented and license-free,
+and is available free for all uses.
 
-Blowfish 2 was released in 2005. It has exactly the same design but has twice as many S tables and uses 64-bit integers instead of 32-bit integers. It no longer works on 64-bit blocks but on 128-bit blocks like AES. 128-bit block, 64 rounds, key up to 4224 bits.
+Blowfish 2 was released in 2005. It has exactly the same design but has twice as many S tables and
+uses 64-bit integers instead of 32-bit integers. It no longer works on 64-bit blocks but on 128-bit
+blocks like AES. 128-bit block, 64 rounds, key up to 4224 bits.
 
 ## About this project
 
 This is a C++ implementation of the encryption algorithm.
 
 ## How to use this in your project?
 
-1. You may fork it and use it like any other source file in your project. You only need [blowfish.hpp](include/blowfish/blowfish.hpp) and [blowfish.cpp](src/blowfish.cpp) files. Just modify the header as per your convienence. 
-2. If you are using CMake, the work is lot easier. You can add this as a git submodule. It isolates your project from this dependency.
+1. You may fork it and use it like any other source file in your project. You only need
+[blowfish.hpp](include/blowfish/blowfish.hpp) and [blowfish.cpp](src/blowfish.cpp) files. Just
+modify the header as per your convenience.
+
+2. If you are using CMake, the work is lot easier. You can add this as a git submodule. It isolates
+your project from this dependency.
 
   ```bash
     # In your project root type these commands
     git submodule add https://github.com/avinal/blowfish
     # considering this addition is your only change
     git commit -m "blowfish submodule added"
     git push origin main
- ```
+  ```
+
+Add this to your CMakeLists.txt as well.
+
+## Building
+
+This library has no dependencies on any other code. Just a C++ compiler should be enough to build
+this. Although this library is supposed to be used under some other project, sometimes you may need
+to build this. Here are the prerequisites:
+
+- [CMake](https://cmake.org/download/)
+- [G++](https://gcc.gnu.org/) or [Clang](https://clang.llvm.org/)
+- [Make](https://www.gnu.org/software/make/) or [Ninja Build](https://ninja-build.org/) or any other CMake compatible generator.
+
+Here is how I install them on Fedora:
+
+```shell
+  sudo dnf install clang cmake g++ make ninja-build
+```
+
+Configure CMake, enabled debug for development purposes:
+
+```shell
+  cmake -B build -G Ninja -DCMAKE_BUILD_TYPE=Debug 
+```
+
+Build using configured generator:
 
- Add this to your CMakeLists.txt as well.
+```shell
+  cmake --build build --config Debug
+```
 
 ## References
 

include/blowfish/blowfish.h

@@ -4,32 +4,34 @@
 // Original Blowfish Algorithm copyright:
 // SPDX-FileCopyrightText: 1997 Paul Kocher
 
-#include <algorithm>
+#pragma once
 #include <array>
 #include <cstdint>
 #include <string>
 
 #define MAXKEYBYTES 56 // 448 bits max
-#define N 16
+static constexpr uint32_t N = 16;
 
 #if !defined(BLOWFISH_BLOWFISH_H_)
 #define BLOWFISH_BLOWFISH_H_
 
 class Blowfish {
 private:
-  std::array<uint32_t, N + 2> PArray;
-  std::array<std::array<uint32_t, 256>, 4> Sboxes;
-  uint32_t F(uint32_t x);
+  std::array<uint32_t, N + 2> PArray{};
+  std::array<std::array<uint32_t, 256>, 4> Sboxes{};
+  uint32_t F(uint32_t x) const noexcept;
 
 public:
-  Blowfish() {}
-  Blowfish(std::string const &key);
+  Blowfish() = default;
+  explicit Blowfish(std::string const &key);
   Blowfish(Blowfish const &) = delete;
 
-  void initialize(std::string const &key);
+  void initialize(const uint8_t *key, size_t keylen);
+  void initialize(const std::string &key);
 
-  void encrypt(uint32_t &xl, uint32_t &xr);
-  void decrypt(uint32_t &xl, uint32_t &xr);
+  void encrypt(uint32_t &xl, uint32_t &xr) noexcept;
+  void decrypt(uint32_t &xl, uint32_t &xr) noexcept;
+  ~Blowfish();
 };
 
 #endif // BLOWFISH_BLOWFISH_H_

include/blowfish/blowfish2.h

@@ -4,32 +4,35 @@
 // Original Blowfish 2 Algorithm copyright:
 // SPDX-FileCopyrightText: 2005 Alexander Pukall
 
-#include <algorithm>
+#pragma once
 #include <array>
 #include <cstdint>
 #include <string>
 
-#define MAXKEYBYTES 56 // 4224 bits max
-#define N 64
+#define MAXKEYBYTES 56 // 448 bits max
 
 #if !defined(BLOWFISH_BLOWFISH2_H_)
 #define BLOWFISH_BLOWFISH2_H_
 
 class Blowfish2 {
 private:
-  std::array<uint64_t, N + 2> PArray;
-  std::array<std::array<uint64_t, 256>, 8> Sboxes;
-  uint64_t F(uint64_t x);
+  static constexpr uint64_t N = 64;
+  std::array<uint64_t, N + 2> PArray{};
+  std::array<std::array<uint64_t, 256>, 8> Sboxes{};
+  uint64_t F(uint64_t x) const noexcept;
 
 public:
-  Blowfish2() {}
-  Blowfish2(std::string const &key);
-  Blowfish2(Blowfish2 const &) = delete;
+  Blowfish2() = default;
+  explicit Blowfish2(const std::string &key) { initialize(key); }
+
+  Blowfish2(const Blowfish2 &) = delete;
+  Blowfish2 &operator=(const Blowfish2 &) = delete;
 
   void initialize(std::string const &key);
+  void initialize(const uint8_t *key, size_t keylen);
 
-  void encrypt(uint64_t &xl, uint64_t &xr);
-  void decrypt(uint64_t &xl, uint64_t &xr);
+  void encrypt(uint64_t &xl, uint64_t &xr) noexcept;
+  void decrypt(uint64_t &xl, uint64_t &xr) noexcept;
 };
 
 #endif // BLOWFISH_BLOWFISH2_H_