Add support for BCM43143;

sd/test/equip_test.sh

@@ -69,10 +69,13 @@ get_config() {
 ### first we assume that this script is started from /home/init.sh and will replace it from the below lines (which are not commented in init.sh :
 
 #if [ -f "/home/hd1/test/equip_test.sh" ]; then
-#	/home/hd1/test/equip_test.sh
-#	exit
+# /home/hd1/test/equip_test.sh
+# exit
 #fi
 
+### Init logs
+log_init
+
 ######################################################
 # start of our custom script !!!!!!
 ######################################################
@@ -82,8 +85,9 @@ log "Start telnet server..."
 telnetd &
 
 
-### configure timezone                                                                                                                                                                               
-echo "$(get_config TIMEZONE)" > /etc/TZ             
+### configure timezone
+
+echo "$(get_config TIMEZONE)" > /etc/TZ
 
 ### get time is done after wifi configuration!
 
@@ -113,13 +117,41 @@ cd /home/3518
 # added :
 himm 0x20050074 0x06802424
 
+### Let ppl hear that we start
+/home/rmm "/home/hd1/test/voice/welcome.g726" 1
+/home/rmm "/home/hd1/test/voice/wait.g726" 1
+
 ### start blinking blue led for configuration in progress
 #/home/led_ctl -boff -yon &
 led -yoff -bfast
 
 
-insmod /home/mtprealloc7601Usta.ko
-insmod /home/mt7601Usta.ko
+bcmver="bd1e"
+bcmver1="0bdc"
+bcmcmd=$(lsusb|grep "0a5c"|cut -d':' -f3)
+
+if [ $bcmver = $bcmcmd ];then
+    echo 1 > /tmp/isbcm
+    #/home/bcm/nvram set /home/bcm/nvram.bin
+    /home/bcm/nvram get
+    mount -t usbfs none /proc/bus/usb
+    /home/bcm/bcmdl -n /tmp/nvram.bin /home/bcm/fw_bcmdhd_xy_r2.bin.trx -C 5 
+    insmod /home/bcm/bcmdhd.ko iface_name=ra0
+    log "BCM 43143:bd1e"
+elif [ $bcmver1 = $bcmcmd ];then
+    echo 1 > /tmp/isbcm
+    #/home/bcm/nvram set /home/bcm/nvram.bin
+    /home/bcm/nvram get
+    mount -t usbfs none /proc/bus/usb
+    /home/bcm/bcmdl -n /tmp/nvram.bin /home/bcm/fw_bcmdhd_xy_r2.bin.trx -C 5 
+    insmod /home/bcm/bcmdhd.ko iface_name=ra0
+    log "BCM 43143:0bdc"
+else
+    echo 1 > /tmp/ismtk
+    insmod /home/mtprealloc7601Usta.ko
+    insmod /home/mt7601Usta.ko
+    log "MTK 7601"
+fi
 
 ifconfig ra0 up
 
@@ -165,19 +197,19 @@ cd /home/3518
 
 
 himm 0x20050074 0x06802424
-   
+
 ### what is this ?
-cd /home                  
-./peripheral &   
+cd /home
+./peripheral &
 ./dispatch &
 ./exnet &
 #./mysystem &
-	
+
 count=5
 
 while [ $count -gt 0 ]
 do
-if [ -f "/tmp/init_finish" ]; then         
+if [ -f "/tmp/init_finish" ]; then
         break
 else
         count=`expr $count - 1`
@@ -193,8 +225,6 @@ done
 cp /home/hd1/test/wpa_supplicant.conf /home/wpa_supplicant.conf
 
 
-### Init logs
-log_init
 # Put version informations in logs and a file which will be included in the http server default page
 TMP_VERSION_FILE=/tmp/version_information
 rm -f ${TMP_VERSION_FILE}
@@ -216,6 +246,12 @@ case ${FIRMWARE_LETTER} in
         HTTP_VERSION='M'
         ;;
 
+    # 1.8.6.1
+    Q)  # Tested :)
+        RTSP_VERSION='M'
+        HTTP_VERSION='M'
+        ;;
+
     # 1.8.5.1
     M)  # Tested :)
         RTSP_VERSION='M'
@@ -247,7 +283,6 @@ log "The RTSP server binary version which will be used is the '${RTSP_VERSION}'"
 log "The HTTP server binary version which will be used is the '${HTTP_VERSION}'"
 
 
-
 log "Check for some files size..."
 ls -l /home/hd1/test/rtspsvr* /home/hd1/test/http/server* | sed "s/^/    /" >> ${LOG_FILE}
 
@@ -256,12 +291,16 @@ log "Debug mode = $(get_config DEBUG)"
 
 # first, configure wifi
 
+### Let ppl hear that we start connect wifi
+/home/rmm "/home/hd1/test/voice/connectting.g726" 1
+
 log "Check for wifi configuration file...*"
 log $(find /home -name "wpa_supplicant.conf")
 
 log "Start wifi configuration..."
-log $(/home/wpa_supplicant -B -i ra0 -c /home/wpa_supplicant.conf )
+res=$(/home/wpa_supplicant -B -i ra0 -c /home/wpa_supplicant.conf )
 log "Status for wifi configuration=$?  (0 is ok)"
+log "Wifi configuration answer: $res"
 
 log "Do network configuration 1/2 (ip and gateway)"
 #ifconfig ra0 192.168.1.121 netmask 255.255.255.0
@@ -273,14 +312,14 @@ log "Done"
 log "Configuration is :"
 ifconfig | sed "s/^/    /" >> ${LOG_FILE}
 
-### configure DNS (google one)
+### configure DNS
 log "Do network configuration 2/2 (DNS)"
-echo "nameserver 8.8.8.8" > /etc/resolv.conf
+echo "nameserver $(get_config NAMESERVER)" > /etc/resolv.conf
 log "Done"
 
-### configure time on a NTP server                    
+### configure time on a NTP server
 log "Get time from a NTP server..."
-NTP_SERVER=$(get_config NTP_SERVER)                  
+NTP_SERVER=$(get_config NTP_SERVER)
 log "But first, test the NTP server '${NTP_SERVER}':"
 ping -c1 ${NTP_SERVER} >> ${LOG_FILE}
 log "Previous datetime is $(date)"
@@ -289,6 +328,12 @@ log "Done"
 log "New datetime is $(date)"
 
 
+### Check if reach gateway and notify
+ping -c1 -W2 $(get_config GATEWAY) > /dev/null
+if [ 0 -eq $? ]; then
+    /home/rmm "/home/hd1/test/voice/wifi_connected.g726" 1
+fi
+
 ### set the root password
 root_pwd=$(get_config ROOT_PASSWORD)
 [ $? -eq 0 ] &&  echo "root:$root_pwd" | chpasswd
@@ -297,17 +342,10 @@ root_pwd=$(get_config ROOT_PASSWORD)
 log "Start blue led on"
 led -yoff -bon
 
-	
+
 ### Rename the timeout sound file to avoid being spammed with chinese audio stuff...
 [ -f /home/timeout.g726 ] && mv /home/timeout.g726 /home/timeout.g726.OFF
 
-### Rmm stuff
-# without this, most things does not work (http server, rtsp)
-# It starts to use the cloud (which is no more launched) so you will find timeout in the logs
-cd /home  
-./rmm &
-
-
 sync
 
 ### Launch FTP server
@@ -355,23 +393,6 @@ cd /home
 ./record_event &
 ./mp4record 60 &
 
-### Launch script to check for motion the last minute
-/home/hd1/test/check_motion.sh &
-
-### Rtsp server
-cd /home/hd1/test/
-log "Start rtsp server : rtspsvr${RTSP_VERSION}..."
-if [[ $(get_config DEBUG) == "yes" ]] ; then
-    ./rtspsvr${RTSP_VERSION} > /${LOG_DIR}/log_rtsp.txt 2>&1 &
-else
-    ./rtspsvr${RTSP_VERSION} &
-fi
-sleep 1
-log "Check for rtsp process : "
-ps | grep rtspsvr | grep -v grep >> ${LOG_FILE}
-
-sleep 5
-
 ### Some configuration
 
 himm 0x20050068 0x327c2c
@@ -395,14 +416,56 @@ himm 0x20030048 0x302
 
 rm /home/hd1/FSCK*
 
+# Check and create crontabs folder
+crontab_folder="/var/spool/cron/crontabs"
+if [ ! -r "$crontab_folder" ]; then
+    mkdir -p "$crontab_folder"
+fi
+# Start crond daemon
+/usr/sbin/crond -b
+
 ### Final led color
 
-led $(get_config LED_WHEN_READY)
+### Check if reach gateway and notify
+ping -c1 -W2 $(get_config GATEWAY) > /dev/null
+if [ 0 -eq $? ]; then
+    led $(get_config LED_WHEN_READY)
+    /home/rmm "/home/hd1/test/voice/success.g726" 1
+else
+    led -boff -yfast
+fi
+
+### Rmm stuff
+# without this, most things does not work (http server, rtsp)
+# It starts to use the cloud (which is no more launched) so you will find timeout in the logs
+# This must be launched after all "/home/rmm" command calls
+cd /home
+./rmm &
+
+
+### Rtsp server
+cd /home/hd1/test/
+log "Start rtsp server : rtspsvr${RTSP_VERSION}..."
+if [[ $(get_config DEBUG) == "yes" ]] ; then
+    ./rtspsvr${RTSP_VERSION} > /${LOG_DIR}/log_rtsp.txt 2>&1 &
+else
+    ./rtspsvr${RTSP_VERSION} &
+fi
+sleep 1
+log "Check for rtsp process : "
+ps | grep rtspsvr | grep -v grep >> ${LOG_FILE}
+
+sleep 5
+
 
 ### List the processes after startup
 log "Processes after startup :"
 ps >> ${LOG_FILE}
 
+### List storage status
+log "Storage status :"
+df -h >> ${LOG_FILE}
+
 ### to make sure log are written...
 
 sync

sd/test/yi-hack.cfg

@@ -6,6 +6,7 @@ ROOT_PASSWORD=1234qwer
 IP=192.168.1.121
 NETMASK=255.255.255.0
 GATEWAY=192.168.1.254
+NAMESERVER=192.168.1.254
 
 ### Led color after full boot
 # The sequence will be :