Bump coverage[toml] from 5.3 to 7.0.3

[dependabot]

Bumps coverage[toml] from 5.3 to 7.0.3.

Release notes

Sourced from coverage[toml]'s releases.

7.0.3

• Fix: when using pytest-cov or pytest-xdist, or perhaps both, the combining step could fail with assert row is not None using 7.0.2. This was due to a race condition that has always been possible and is still possible. In 7.0.1 and before, the error was silently swallowed by the combining code. Now it will produce a message “Couldn’t combine data file” and ignore the data file as it used to do before 7.0.2. Closes issue 1522.

➡️  PyPI page: coverage 7.0.3. :arrow_right:  To install: python3 -m pip install coverage==7.0.3

7.0.2

• Fix: when using the [run] relative_files = True setting, a relative [paths] pattern was still being made absolute. This is now fixed, closing issue 1519.
• Fix: if Python doesn’t provide tomllib, then TOML configuration files can only be read if coverage.py is installed with the [toml] extra. Coverage.py will raise an error if TOML support is not installed when it sees your settings are in a .toml file. But it didn’t understand that [tools.coverage] was a valid section header, so the error wasn’t reported if you used that header, and settings were silently ignored. This is now fixed, closing issue 1516.
• Fix: adjusted how decorators are traced on PyPy 7.3.10, fixing issue 1515.
• Fix: the coverage lcov report did not properly implement the --fail-under=MIN option. This has been fixed.
• Refactor: added many type annotations, including a number of refactorings. This should not affect outward behavior, but they were a bit invasive in some places, so keep your eyes peeled for oddities.
• Refactor: removed the vestigial and long untested support for Jython and IronPython.

➡️  PyPI page: coverage 7.0.2. :arrow_right:  To install: python3 -m pip install coverage==7.0.2

7.0.1

• When checking if a file mapping resolved to a file that exists, we weren’t considering files in .whl files. This is now fixed, closing issue 1511.
• File pattern rules were too strict, forbidding plus signs and curly braces in directory and file names. This is now fixed, closing issue 1513.
• Unusual Unicode or control characters in source files could prevent reporting. This is now fixed, closing issue 1512.
• The PyPy wheel now installs on PyPy 3.7, 3.8, and 3.9, closing issue 1510.

➡️  PyPI page: coverage 7.0.1. :arrow_right:  To install: python3 -m pip install coverage==7.0.1

7.0.0

Nothing new beyond 7.0.0b1.

➡️  PyPI page: coverage 7.0.0. :arrow_right:  To install: python3 -m pip install coverage==7.0.0

7.0.0b1

A number of changes have been made to file path handling, including pattern matching and path remapping with the [paths] setting (see [paths]). These changes might affect you, and require you to update your settings.

(This release includes the changes from 6.6.0b1

, since 6.6.0 was never released.)

• Changes to file pattern matching, which might require updating your configuration:
  • Previously, * would incorrectly match directory separators, making precise matching difficult. This is now fixed, closing issue 1407.
  • Now ** matches any number of nested directories, including none.
• Improvements to combining data files when using the [run] relative_files setting, which might require updating your configuration:
  • During coverage combine, relative file paths are implicitly combined without needing a [paths] configuration setting. This also fixed issue 991.
  • A [paths] setting like */foo will now match foo/bar.py so that relative file paths can be combined more easily.
  • The [run] relative_files setting is properly interpreted in more places, fixing issue 1280.
• When remapping file paths with [paths], a path will be remapped only if the resulting path exists. The documentation has long said the prefix had to exist, but it was never enforced. This fixes issue 608, improves issue 649, and closes issue 757.
• Reporting operations now implicitly use the [paths] setting to remap file paths within a single data file. Combining multiple files still requires the coverage combine step, but this simplifies some single-file situations. Closes issue 1212 and issue 713.
• The coverage report command now has a --format= option. The original style is now --format=text, and is the default.
  • Using --format=markdown will write the table in Markdown format, thanks to Steve Oswald, closing issue 1418.

... (truncated)

Changelog

Sourced from coverage[toml]'s changelog.

Version 7.0.3 — 2023-01-03

• Fix: when using pytest-cov or pytest-xdist, or perhaps both, the combining step could fail with assert row is not None using 7.0.2. This was due to a race condition that has always been possible and is still possible. In 7.0.1 and before, the error was silently swallowed by the combining code. Now it will produce a message "Couldn't combine data file" and ignore the data file as it used to do before 7.0.2. Closes issue 1522_.

.. _issue 1522: nedbat/coveragepy#1522

.. _changes_7-0-2:

Version 7.0.2 — 2023-01-02

• Fix: when using the [run] relative_files = True setting, a relative [paths] pattern was still being made absolute. This is now fixed, closing issue 1519_.

• Fix: if Python doesn't provide tomllib, then TOML configuration files can only be read if coverage.py is installed with the [toml] extra. Coverage.py will raise an error if TOML support is not installed when it sees your settings are in a .toml file. But it didn't understand that [tools.coverage] was a valid section header, so the error wasn't reported if you used that header, and settings were silently ignored. This is now fixed, closing issue 1516_.

• Fix: adjusted how decorators are traced on PyPy 7.3.10, fixing issue 1515_.

• Fix: the coverage lcov report did not properly implement the --fail-under=MIN option. This has been fixed.

• Refactor: added many type annotations, including a number of refactorings. This should not affect outward behavior, but they were a bit invasive in some places, so keep your eyes peeled for oddities.

• Refactor: removed the vestigial and long untested support for Jython and IronPython.

.. _issue 1515: nedbat/coveragepy#1515 .. _issue 1516: nedbat/coveragepy#1516 .. _issue 1519: nedbat/coveragepy#1519

.. _changes_7-0-1:

Version 7.0.1 — 2022-12-23

... (truncated)

Commits

• 2ff9098 docs: prep for 7.0.3
• 1f34d8b fix: race condition on data file shouldn't break combining. #1522
• 85170bf build: two-step combines for speed
• 1605f07 mypy: misc.py, test_misc.py
• 4f3ccf2 refactor: a better way to have maybe-importable third-party modules
• 98301ed mypy: test_config.py, test_context.py
• 9d2e1b0 mypy: test_concurrency.py, test_python.py
• c3ee30c refactor(test): use tmp_path instead of tmpdir
• 0b05b45 mypy: test_annotate.py test_arcs.py test_collector.py
• 2090f79 style: better
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[dependabot]

Superseded by #417.