[PW_SID:1079648] Add interrupt controller for JHB100 SoC

Documentation/devicetree/bindings/interrupt-controller/starfive,jh8100-intc.yaml → Documentation/devicetree/bindings/interrupt-controller/starfive,jhb100-intc.yaml

@@ -1,13 +1,13 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/interrupt-controller/starfive,jh8100-intc.yaml#
+$id: http://devicetree.org/schemas/interrupt-controller/starfive,jhb100-intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: StarFive External Interrupt Controller
 
 description:
-  StarFive SoC JH8100 contain a external interrupt controller. It can be used
+  StarFive SoC JHB100 contain a external interrupt controller. It can be used
   to handle high-level input interrupt signals. It also send the output
   interrupt signal to RISC-V PLIC.
 
@@ -16,7 +16,7 @@ maintainers:
 
 properties:
   compatible:
-    const: starfive,jh8100-intc
+    const: starfive,jhb100-intc
 
   reg:
     maxItems: 1
@@ -40,8 +40,6 @@ properties:
 required:
   - compatible
   - reg
-  - clocks
-  - resets
   - interrupts
   - interrupt-controller
   - "#interrupt-cells"
@@ -51,10 +49,8 @@ additionalProperties: false
 examples:
   - |
     interrupt-controller@12260000 {
-      compatible = "starfive,jh8100-intc";
+      compatible = "starfive,jhb100-intc";
       reg = <0x12260000 0x10000>;
-      clocks = <&syscrg_ne 76>;
-      resets = <&syscrg_ne 13>;
       interrupts = <45>;
       interrupt-controller;
       #interrupt-cells = <1>;

MAINTAINERS

@@ -25300,11 +25300,11 @@ F:	Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
 F:	drivers/phy/starfive/phy-jh7110-pcie.c
 F:	drivers/phy/starfive/phy-jh7110-usb.c
 
-STARFIVE JH8100 EXTERNAL INTERRUPT CONTROLLER DRIVER
+STARFIVE JHB100 EXTERNAL INTERRUPT CONTROLLER DRIVER
 M:	Changhuang Liang <changhuang.liang@starfivetech.com>
 S:	Supported
-F:	Documentation/devicetree/bindings/interrupt-controller/starfive,jh8100-intc.yaml
-F:	drivers/irqchip/irq-starfive-jh8100-intc.c
+F:	Documentation/devicetree/bindings/interrupt-controller/starfive,jhb100-intc.yaml
+F:	drivers/irqchip/irq-starfive-jhb100-intc.c
 
 STATIC BRANCH/CALL
 M:	Peter Zijlstra <peterz@infradead.org>

drivers/irqchip/Kconfig

@@ -651,13 +651,13 @@ config SIFIVE_PLIC
 	select IRQ_DOMAIN_HIERARCHY
 	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 
-config STARFIVE_JH8100_INTC
-	bool "StarFive JH8100 External Interrupt Controller"
+config STARFIVE_JHB100_INTC
+	bool "StarFive JHB100 External Interrupt Controller"
 	depends on ARCH_STARFIVE || COMPILE_TEST
 	default ARCH_STARFIVE
 	select IRQ_DOMAIN_HIERARCHY
 	help
-	  This enables support for the INTC chip found in StarFive JH8100
+	  This enables support for the INTC chip found in StarFive JHB100
 	  SoC.
 
 	  If you don't know what to do here, say Y.

drivers/irqchip/Makefile

@@ -108,7 +108,7 @@ obj-$(CONFIG_RISCV_APLIC_MSI)		+= irq-riscv-aplic-msi.o
 obj-$(CONFIG_RISCV_IMSIC)		+= irq-riscv-imsic-state.o irq-riscv-imsic-early.o irq-riscv-imsic-platform.o
 obj-$(CONFIG_RISCV_RPMI_SYSMSI)		+= irq-riscv-rpmi-sysmsi.o
 obj-$(CONFIG_SIFIVE_PLIC)		+= irq-sifive-plic.o
-obj-$(CONFIG_STARFIVE_JH8100_INTC)	+= irq-starfive-jh8100-intc.o
+obj-$(CONFIG_STARFIVE_JHB100_INTC)	+= irq-starfive-jhb100-intc.o
 obj-$(CONFIG_ACLINT_SSWI)		+= irq-aclint-sswi.o
 obj-$(CONFIG_IMX_IRQSTEER)		+= irq-imx-irqsteer.o
 obj-$(CONFIG_IMX_INTMUX)		+= irq-imx-intmux.o