[PW_SID:1095950] riscv: spacemit: Add PCIe RC controller support for K3

Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml

@@ -27,8 +27,11 @@ allOf:
   - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
   - if:
       not:
-        required:
-          - msi-map
+        anyOf:
+          - required:
+              - msi-map
+          - required:
+              - msi-parent
     then:
       properties:
         interrupt-names:

Documentation/devicetree/bindings/pci/spacemit,k3-pcie-host.yaml

@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/spacemit,k3-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT K3 PCI Express Host Controller
+
+maintainers:
+  - Inochi Amaoto <inochiama@gmail.com>
+
+description:
+  The SpacemiT K3 SoC PCIe host controller is based on the Synopsys
+  DesignWare PCIe IP. The controller uses the external MSI interrupt
+  controller.
+
+allOf:
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: spacemit,k3-pcie
+
+  reg:
+    items:
+      - description: DesignWare PCIe registers
+      - description: Data Bus Interface (DBI) shadow registers
+      - description: ATU address space
+      - description: PCIe configuration space
+      - description: Link control registers
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: atu
+      - const: config
+      - const: link
+
+  clocks:
+    items:
+      - description: DWC PCIe Data Bus Interface (DBI) clock
+      - description: DWC PCIe application AXI-bus master interface clock
+      - description: DWC PCIe application AXI-bus slave interface clock
+
+  clock-names:
+    items:
+      - const: dbi
+      - const: mstr
+      - const: slv
+
+  resets:
+    items:
+      - description: DWC PCIe Data Bus Interface (DBI) reset
+      - description: DWC PCIe application AXI-bus master interface reset
+      - description: DWC PCIe application AXI-bus slave interface reset
+
+  reset-names:
+    items:
+      - const: dbi
+      - const: mstr
+      - const: slv
+
+  msi-parent: true
+
+  phys:
+    description:
+      PHY phandle from the Combo PHY, the lane number does not depends
+      on this, since the number of lanes provided by Combo PHY can be
+      1 or 2.
+    minItems: 1
+    maxItems: 6
+
+  phy-names:
+    minItems: 1
+    maxItems: 6
+
+  spacemit,apmu:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      A phandle that refers to the APMU system controller, whose regmap is
+      used in managing resets and link state, along with and offset of its
+      reset control register.
+    items:
+      - items:
+          - description: phandle to APMU system controller
+          - description: register offset
+
+required:
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - msi-parent
+  - spacemit,apmu
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie@80000000 {
+        compatible = "spacemit,k3-pcie";
+        reg = <0x0  0x80000000 0x0 0x00001000>,
+              <0x0  0x80100000 0x0 0x00001000>,
+              <0x0  0x80300000 0x0 0x00003f20>,
+              <0x11 0x00000000 0x0 0x00010000>,
+              <0x0  0x82900000 0x0 0x00001000>;
+        reg-names = "dbi", "dbi2", "atu", "config", "link";
+        device_type = "pci";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        clocks = <&syscon_apmu 89>,
+                 <&syscon_apmu 56>,
+                 <&syscon_apmu 57>;
+        clock-names = "dbi", "mstr", "slv";
+        msi-parent = <&simsic>;
+        ranges = <0x01000000 0x00 0x00010000 0x11 0x00010000 0x0 0x00100000>,
+                 <0x02000000 0x0  0x00110000 0x11 0x00110000 0x0 0x7fef0000>,
+                 <0x43000000 0x18 0x00000000 0x18 0x00000000 0x1 0x00000000>;
+        resets = <&syscon_apmu 76>,
+                 <&syscon_apmu 78>,
+                 <&syscon_apmu 77>;
+        reset-names = "dbi", "mstr", "slv";
+        linux,pci-domain = <0>;
+        spacemit,apmu = <&syscon_apmu 0x1f0>;
+      };
+    };
+

drivers/pci/controller/dwc/Kconfig

@@ -439,15 +439,15 @@ config PCIE_SOPHGO_DW
 	  Sophgo SoCs.
 
 config PCIE_SPACEMIT_K1
-	tristate "SpacemiT K1 PCIe controller (host mode)"
+	tristate "SpacemiT K1/K3 PCIe controller (host mode)"
 	depends on ARCH_SPACEMIT || COMPILE_TEST
 	depends on HAS_IOMEM
 	select PCIE_DW_HOST
 	select PCI_PWRCTRL_GENERIC
 	default ARCH_SPACEMIT
 	help
 	  Enables support for the DesignWare based PCIe controller in
-	  the SpacemiT K1 SoC operating in host mode.  Three controllers
+	  the SpacemiT K1/K3 SoC operating in host mode. Three controllers
 	  are available on the K1 SoC; the first of these shares a PHY
 	  with a USB 3.0 host controller (one or the other can be used).