[PW_SID:966651] Add USB2.0 PHY and USB3.0 PHY support for SpacemiT K1 by linux-riscv-bot · Pull Request #448 · linux-riscv/linux

linux-riscv-bot · 2025-05-27T12:30:37Z

PR for series 966651 applied to workflow__riscv__fixes

Name: Add USB2.0 PHY and USB3.0 PHY support for SpacemiT K1
URL: https://patchwork.kernel.org/project/linux-riscv/list/?series=966651
Version: 5

Add support for USB2 PHY found on SpacemiT K1 SoC. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Ze Huang <huangze@whut.edu.cn> Signed-off-by: Linux RISC-V bot <linux.riscv.bot@gmail.com>

Introduce support for SpacemiT K1 PCIe/USB3 combo PHY controller. PCIe portA and USB3 controller share this phy, only one of them can work at any given application scenario. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Co-developed-by: Junzhong Pan <junzhong.pan@spacemit.com> Signed-off-by: Junzhong Pan <junzhong.pan@spacemit.com> Signed-off-by: Ze Huang <huangze@whut.edu.cn> Signed-off-by: Linux RISC-V bot <linux.riscv.bot@gmail.com>

The SpacemiT K1 SoC includes three USB ports: - One USB2.0 OTG port - One USB2.0 host-only port - One USB3.0 port with an integrated USB2.0 DRD interface Each of these ports is connected to a USB2.0 PHY responsible for USB2 transmission. This commit adds support for the SpacemiT K1 USB2.0 PHY, which is compliant with the USB 2.0 specification and supports both 8-bit 60MHz and 16-bit 30MHz parallel interfaces. Signed-off-by: Ze Huang <huangze@whut.edu.cn> Signed-off-by: Linux RISC-V bot <linux.riscv.bot@gmail.com>

Add support for USB 3.0 mode on the K1 PCIe/USB3 combo PHY which implements PIPE3(125MHz) interface for USB3.0. Currently, only USB mode is supported; PCIe support is not included in this change. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Ze Huang <huangze@whut.edu.cn> Signed-off-by: Linux RISC-V bot <linux.riscv.bot@gmail.com>

linux-riscv-bot · 2025-05-27T12:35:54Z

Patch 1: "[v5,1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY"
build-rv32-defconfig
Desc: Builds riscv32 defconfig
Duration: 105.56 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T12:50:41Z

Patch 1: "[v5,1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY"
build-rv64-clang-allmodconfig
Desc: Builds riscv64 allmodconfig with Clang, and checks for errors and added warnings
Duration: 885.81 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:09:50Z

Patch 1: "[v5,1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY"
build-rv64-gcc-allmodconfig
Desc: Builds riscv64 allmodconfig with GCC, and checks for errors and added warnings
Duration: 1147.40 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:10:12Z

Patch 1: "[v5,1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY"
build-rv64-nommu-k210-defconfig
Desc: Builds riscv64 defconfig with NOMMU for K210
Duration: 20.51 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:10:35Z

Patch 1: "[v5,1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY"
build-rv64-nommu-k210-virt
Desc: Builds riscv64 defconfig with NOMMU for the virt platform
Duration: 21.60 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:10:38Z

Patch 1: "[v5,1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY"
checkpatch
Desc: Runs checkpatch.pl on the patch
Duration: 1.76 seconds
Result: WARNING
Output:

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#17: 
new file mode 100644

total: 0 errors, 1 warnings, 0 checks, 40 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

Commit cce9a3038301 ("dt-bindings: phy: spacemit: add K1 USB2 PHY") has style problems, please review.

NOTE: Ignored message types: ALLOC_SIZEOF_STRUCT CAMELCASE COMMIT_LOG_LONG_LINE GIT_COMMIT_ID MACRO_ARG_REUSE NO_AUTHOR_SIGN_OFF

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.
total: 0 errors, 1 warnings, 0 checks, 40 lines checked
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?

linux-riscv-bot · 2025-05-27T13:11:47Z

Patch 1: "[v5,1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY"
dtb-warn-rv64
Desc: Checks for Device Tree warnings/errors
Duration: 66.83 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:11:48Z

Patch 1: "[v5,1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY"
header-inline
Desc: Detects static functions without inline keyword in header files
Duration: 0.23 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:11:51Z

Patch 1: "[v5,1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY"
kdoc
Desc: Detects for kdoc errors
Duration: 0.91 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:11:52Z

Patch 1: "[v5,1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY"
module-param
Desc: Detect module_param changes
Duration: 0.24 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:11:54Z

Patch 1: "[v5,1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY"
verify-fixes
Desc: Verifies that the Fixes: tags exist
Duration: 0.22 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:11:56Z

Patch 1: "[v5,1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY"
verify-signedoff
Desc: Verifies that Signed-off-by: tags are correct
Duration: 0.29 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:13:56Z

Patch 2: "[v5,2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY"
build-rv32-defconfig
Desc: Builds riscv32 defconfig
Duration: 105.16 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:28:45Z

Patch 2: "[v5,2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY"
build-rv64-clang-allmodconfig
Desc: Builds riscv64 allmodconfig with Clang, and checks for errors and added warnings
Duration: 887.93 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:47:58Z

Patch 2: "[v5,2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY"
build-rv64-gcc-allmodconfig
Desc: Builds riscv64 allmodconfig with GCC, and checks for errors and added warnings
Duration: 1151.47 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:48:21Z

Patch 2: "[v5,2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY"
build-rv64-nommu-k210-defconfig
Desc: Builds riscv64 defconfig with NOMMU for K210
Duration: 20.66 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:48:44Z

Patch 2: "[v5,2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY"
build-rv64-nommu-k210-virt
Desc: Builds riscv64 defconfig with NOMMU for the virt platform
Duration: 21.39 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:48:47Z

Patch 2: "[v5,2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY"
checkpatch
Desc: Runs checkpatch.pl on the patch
Duration: 1.72 seconds
Result: WARNING
Output:

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#22: 
new file mode 100644

total: 0 errors, 1 warnings, 0 checks, 72 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

Commit 23f644df1bcd ("dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY") has style problems, please review.

NOTE: Ignored message types: ALLOC_SIZEOF_STRUCT CAMELCASE COMMIT_LOG_LONG_LINE GIT_COMMIT_ID MACRO_ARG_REUSE NO_AUTHOR_SIGN_OFF

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.
total: 0 errors, 1 warnings, 0 checks, 72 lines checked
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?

linux-riscv-bot · 2025-05-27T13:49:56Z

Patch 2: "[v5,2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY"
dtb-warn-rv64
Desc: Checks for Device Tree warnings/errors
Duration: 66.91 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:49:57Z

Patch 2: "[v5,2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY"
header-inline
Desc: Detects static functions without inline keyword in header files
Duration: 0.23 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:50:00Z

Patch 2: "[v5,2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY"
kdoc
Desc: Detects for kdoc errors
Duration: 0.90 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:50:02Z

Patch 2: "[v5,2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY"
module-param
Desc: Detect module_param changes
Duration: 0.24 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:50:04Z

Patch 2: "[v5,2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY"
verify-fixes
Desc: Verifies that the Fixes: tags exist
Duration: 0.22 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:50:06Z

Patch 2: "[v5,2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY"
verify-signedoff
Desc: Verifies that Signed-off-by: tags are correct
Duration: 0.30 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T13:52:07Z

Patch 3: "[v5,3/4] phy: spacemit: support K1 USB2.0 PHY controller"
build-rv32-defconfig
Desc: Builds riscv32 defconfig
Duration: 105.60 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T14:08:26Z

Patch 3: "[v5,3/4] phy: spacemit: support K1 USB2.0 PHY controller"
build-rv64-clang-allmodconfig
Desc: Builds riscv64 allmodconfig with Clang, and checks for errors and added warnings
Duration: 977.12 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T14:29:36Z

Patch 3: "[v5,3/4] phy: spacemit: support K1 USB2.0 PHY controller"
build-rv64-gcc-allmodconfig
Desc: Builds riscv64 allmodconfig with GCC, and checks for errors and added warnings
Duration: 1268.26 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T14:29:57Z

Patch 3: "[v5,3/4] phy: spacemit: support K1 USB2.0 PHY controller"
build-rv64-nommu-k210-defconfig
Desc: Builds riscv64 defconfig with NOMMU for K210
Duration: 20.25 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T14:30:20Z

Patch 3: "[v5,3/4] phy: spacemit: support K1 USB2.0 PHY controller"
build-rv64-nommu-k210-virt
Desc: Builds riscv64 defconfig with NOMMU for the virt platform
Duration: 21.23 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T14:30:25Z

Patch 3: "[v5,3/4] phy: spacemit: support K1 USB2.0 PHY controller"
checkpatch
Desc: Runs checkpatch.pl on the patch
Duration: 2.84 seconds
Result: WARNING
Output:

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#57: 
new file mode 100644

WARNING: please write a help paragraph that fully describes the config symbol with at least 4 lines
#66: FILE: drivers/phy/spacemit/Kconfig:5:
+config PHY_SPACEMIT_K1_USB2
+	tristate "SpacemiT K1 USB 2.0 PHY support"
+	depends on (ARCH_SPACEMIT || COMPILE_TEST) && OF
+	depends on COMMON_CLK
+	depends on USB_COMMON
+	select GENERIC_PHY
+	help
+	  Enable this to support K1 USB 2.0 PHY driver. This driver takes care of
+	  enabling and clock setup and will be used by K1 udc/ehci/otg/xhci driver.

total: 0 errors, 2 warnings, 0 checks, 173 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

Commit a2831822aaba ("phy: spacemit: support K1 USB2.0 PHY controller") has style problems, please review.

NOTE: Ignored message types: ALLOC_SIZEOF_STRUCT CAMELCASE COMMIT_LOG_LONG_LINE GIT_COMMIT_ID MACRO_ARG_REUSE NO_AUTHOR_SIGN_OFF

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.
total: 0 errors, 2 warnings, 0 checks, 173 lines checked
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
WARNING: please write a help paragraph that fully describes the config symbol with at least 4 lines

linux-riscv-bot · 2025-05-27T14:31:33Z

Patch 3: "[v5,3/4] phy: spacemit: support K1 USB2.0 PHY controller"
dtb-warn-rv64
Desc: Checks for Device Tree warnings/errors
Duration: 67.31 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T14:31:35Z

Patch 3: "[v5,3/4] phy: spacemit: support K1 USB2.0 PHY controller"
header-inline
Desc: Detects static functions without inline keyword in header files
Duration: 0.30 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T14:31:38Z

Patch 3: "[v5,3/4] phy: spacemit: support K1 USB2.0 PHY controller"
kdoc
Desc: Detects for kdoc errors
Duration: 0.85 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T14:31:39Z

Patch 3: "[v5,3/4] phy: spacemit: support K1 USB2.0 PHY controller"
module-param
Desc: Detect module_param changes
Duration: 0.26 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T14:31:41Z

Patch 3: "[v5,3/4] phy: spacemit: support K1 USB2.0 PHY controller"
verify-fixes
Desc: Verifies that the Fixes: tags exist
Duration: 0.22 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T14:31:43Z

Patch 3: "[v5,3/4] phy: spacemit: support K1 USB2.0 PHY controller"
verify-signedoff
Desc: Verifies that Signed-off-by: tags are correct
Duration: 0.29 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T14:33:43Z

Patch 4: "[v5,4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY"
build-rv32-defconfig
Desc: Builds riscv32 defconfig
Duration: 105.92 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T14:49:07Z

Patch 4: "[v5,4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY"
build-rv64-clang-allmodconfig
Desc: Builds riscv64 allmodconfig with Clang, and checks for errors and added warnings
Duration: 922.30 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T15:09:03Z

Patch 4: "[v5,4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY"
build-rv64-gcc-allmodconfig
Desc: Builds riscv64 allmodconfig with GCC, and checks for errors and added warnings
Duration: 1194.78 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T15:09:25Z

Patch 4: "[v5,4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY"
build-rv64-nommu-k210-defconfig
Desc: Builds riscv64 defconfig with NOMMU for K210
Duration: 20.71 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T15:09:48Z

Patch 4: "[v5,4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY"
build-rv64-nommu-k210-virt
Desc: Builds riscv64 defconfig with NOMMU for the virt platform
Duration: 21.37 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T15:09:52Z

Patch 4: "[v5,4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY"
checkpatch
Desc: Runs checkpatch.pl on the patch
Duration: 2.24 seconds
Result: WARNING
Output:

WARNING: please write a help paragraph that fully describes the config symbol with at least 4 lines
#29: FILE: drivers/phy/spacemit/Kconfig:15:
+config PHY_SPACEMIT_K1_COMBPHY
+	tristate "SpacemiT K1 PCIe/USB3 combo PHY support"
+	depends on (ARCH_SPACEMIT || COMPILE_TEST) && OF
+	depends on COMMON_CLK
+	select GENERIC_PHY
+	help
+	  USB3/PCIe Combo PHY Support for SpacemiT K1 SoC

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#45: 
new file mode 100644

total: 0 errors, 2 warnings, 0 checks, 280 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

Commit c0b00e090832 ("phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY") has style problems, please review.

NOTE: Ignored message types: ALLOC_SIZEOF_STRUCT CAMELCASE COMMIT_LOG_LONG_LINE GIT_COMMIT_ID MACRO_ARG_REUSE NO_AUTHOR_SIGN_OFF

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.
total: 0 errors, 2 warnings, 0 checks, 280 lines checked
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
WARNING: please write a help paragraph that fully describes the config symbol with at least 4 lines

linux-riscv-bot · 2025-05-27T15:11:00Z

Patch 4: "[v5,4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY"
dtb-warn-rv64
Desc: Checks for Device Tree warnings/errors
Duration: 66.97 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T15:11:02Z

Patch 4: "[v5,4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY"
header-inline
Desc: Detects static functions without inline keyword in header files
Duration: 0.22 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T15:11:05Z

Patch 4: "[v5,4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY"
kdoc
Desc: Detects for kdoc errors
Duration: 0.87 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T15:11:08Z

Patch 4: "[v5,4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY"
module-param
Desc: Detect module_param changes
Duration: 1.44 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T15:11:09Z

Patch 4: "[v5,4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY"
verify-fixes
Desc: Verifies that the Fixes: tags exist
Duration: 0.22 seconds
Result: PASS

linux-riscv-bot · 2025-05-27T15:11:11Z

Patch 4: "[v5,4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY"
verify-signedoff
Desc: Verifies that Signed-off-by: tags are correct
Duration: 0.30 seconds
Result: PASS

Sutter099 added 4 commits May 27, 2025 12:30

dt-bindings: phy: spacemit: add K1 USB2 PHY

cce9a30

Add support for USB2 PHY found on SpacemiT K1 SoC. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Ze Huang <huangze@whut.edu.cn> Signed-off-by: Linux RISC-V bot <linux.riscv.bot@gmail.com>

linux-riscv-bot closed this May 28, 2025

linux-riscv-bot deleted the pw966651 branch May 28, 2025 13:54

Conversation

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025

Uh oh!

linux-riscv-bot commented May 27, 2025