Bump github/codeql-action/init from 4.36.2 to 4.37.6

[dependabot]

Bumps github/codeql-action/init from 4.36.2 to 4.37.6.

Release notes

Sourced from github/codeql-action/init's releases.

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

v4.37.3

No user facing changes.

v4.37.2

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

v4.37.1

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

v4.37.0

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

v4.36.3

No user facing changes.

Changelog

Sourced from github/codeql-action/init's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

... (truncated)

Commits

• 5595cca Merge pull request #4071 from github/update-v4.37.6-6a9359a1b
• ec9c757 Add change note for PR 4070
• 45c8742 Update changelog for v4.37.6
• 6a9359a Merge pull request #4070 from github/mbg/remote-address/change-file-default
• 065cdc0 Change DEFAULT_CONFIG_FILE_NAME
• f99dd5a Merge pull request #4066 from github/dependabot/npm_and_yarn/js-yaml-5.2.2
• 1804b21 Merge pull request #4068 from github/mergeback/v4.37.5-to-main-d1ba80a1
• 3020a2f Rebuild
• 93c3a5a Update changelog and version after v4.37.5
• d1ba80a Merge pull request #4067 from github/update-v4.37.5-1cd4d01d5
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[github-advanced-security]

You are seeing this message because GitHub Code Scanning has recently been set up for this repository, or this pull request contains the workflow file for the Code Scanning tool.

What Enabling Code Scanning Means:

• The 'Security' tab will display more code scanning analysis results (e.g., for the default branch).
• Depending on your configuration and choice of analysis tool, future pull requests will be annotated with code scanning analysis results.
• You will be able to see the analysis results for the pull request's branch on this overview once the scans have completed and the checks have passed.

For more information about GitHub Code Scanning, check out the documentation.

[dependabot]

OK, I won't notify you again about this release, but will get in touch when a new version is available. If you'd rather skip all updates until the next major or minor version, let me know by commenting @dependabot ignore this major version or @dependabot ignore this minor version. You can also ignore all major, minor, or patch releases for a dependency by adding an ignore condition with the desired update_types to your config file.

If you change your mind, just re-open this PR and I'll resolve any conflicts on it.