New Crowdin updates

docs/CROWDIN/cs/SettingUpAaps/CompletingTheObjectives.md

@@ -153,7 +153,7 @@ This means that when you are on **Objective 6**, if sensor glucose levels are dr
 
 **As a consequence, you have to handle high glucose values with manual insulin bolus corrections.**
 
-- If your basal IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
+- If your IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
 
 ![Example negative IOB](../images/Objective6_negIOB.png)
 
@@ -240,4 +240,4 @@ For example, if you eat the same thing for breakfast at the same time every morn
 
 If you wish to go back in the **Objectives** for whatever reason you can do so by clicking at "clear finished".
 
-![Návrat k předchozímu cíli](../images/Objective_ClearFinished.png)
+![Návrat k předchozímu cíli](../images/Objective_ClearFinished.png)

docs/CROWDIN/cs/SettingUpAaps/Preferences.md

@@ -321,7 +321,7 @@ Closed Loop is only possible if you are in **[Objective 6](#objectives-objective
 
 In this mode, [maxIOB](#Open-APS-features-maximum-total-iob-openaps-cant-go-over) is set to zero.
 
-This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if basal IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
+This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
 
 (Preferences-minimal-request-change)=
 ### Minimal request change
@@ -505,4 +505,4 @@ Můžete pomoci komunitě tím, že daruje vaše data do výzkumných projektů!
 
 In Preferences, you can define when data shall be uploaded
 - only if connected to Wi-Fi
-- pouze při nabíjení
+- pouze při nabíjení

docs/CROWDIN/de/SettingUpAaps/CompletingTheObjectives.md

@@ -153,7 +153,7 @@ Das heißt, während Du Dich im **Ziel 6** befindest, wird **AAPS** bei fallende
 
 **Hohe Werte müssen deshalb von Dir manuell mit einem Korrekturbolus korrigiert werden.**
 
-- Wenn Dein Basal-IOB negativ ist (siehe Screenshot unten), kann auch in **Ziel 6** eine temporäre Basalrate (TBR) > 100% gesetzt werden.
+- If your IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
 
 ![Example negative IOB](../images/Objective6_negIOB.png)
 
@@ -240,4 +240,4 @@ Wenn Du beispielsweise jeden Morgen vor der Arbeit/Schule das Gleiche isst, kann
 
 Wenn Du, aus welchem Grund auch immer, ein **Ziel** neu starten willst, klicke auf „Ziel neu starten“.
 
-![Objective (Ziel) neu starten](../images/Objective_ClearFinished.png)
+![Objective (Ziel) neu starten](../images/Objective_ClearFinished.png)

docs/CROWDIN/de/SettingUpAaps/Preferences.md

@@ -321,7 +321,7 @@ Der Closed Loop steht ab dem **[Ziel 6 ](#objectives-objective6)** (oder darübe
 
 In diesem Modus ist [maxIOB](#Open-APS-features-maximum-total-iob-openaps-cant-go-over) auf Null gesetzt.
 
-Das bedeutet, dass bei fallenden Glukosewerten, **AAPS** das Basal für Dich reduzieren kann. Wenn aber die Glukosewerte steigen, wird keine automatische Korrektur vorgenommen. Die Basalrate wird genauso so bleiben, wie sie im aktuellen **Profil** hinterlegt ist. Nur wenn das Basal-IOB negativ ist (wegen einer vorangegangenen Abschaltung der Basalrate bei niedrigen Werten) wird, um den **Glukosewert** zu senken, zusätzliches Insulin abgegeben.
+Das bedeutet, dass bei fallenden Glukosewerten, **AAPS** das Basal für Dich reduzieren kann. Wenn aber die Glukosewerte steigen, wird keine automatische Korrektur vorgenommen. Die Basalrate wird genauso so bleiben, wie sie im aktuellen **Profil** hinterlegt ist. Only if IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
 
 (Preferences-minimal-request-change)=
 ### Minimal request change
@@ -505,4 +505,4 @@ Du kannst die Community unterstützen, indem Du Deine Daten für Forschungsproje
 
 In den Einstellungen kannst Du festlegen, wann Daten hochgeladen werden sollen
 - nur über WLAN-Verbindungen
-- nur während des Ladens
+- nur während des Ladens

docs/CROWDIN/el/SettingUpAaps/CompletingTheObjectives.md

@@ -153,7 +153,7 @@ This means that when you are on **Objective 6**, if sensor glucose levels are dr
 
 **As a consequence, you have to handle high glucose values with manual insulin bolus corrections.**
 
-- If your basal IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
+- If your IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
 
 ![Example negative IOB](../images/Objective6_negIOB.png)
 
@@ -240,4 +240,4 @@ For example, if you eat the same thing for breakfast at the same time every morn
 
 If you wish to go back in the **Objectives** for whatever reason you can do so by clicking at "clear finished".
 
-![Go back in objectives](../images/Objective_ClearFinished.png)
+![Go back in objectives](../images/Objective_ClearFinished.png)

docs/CROWDIN/el/SettingUpAaps/Preferences.md

@@ -321,7 +321,7 @@ Closed Loop is only possible if you are in **[Objective 6](#objectives-objective
 
 In this mode, [maxIOB](#Open-APS-features-maximum-total-iob-openaps-cant-go-over) is set to zero.
 
-This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if basal IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
+This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
 
 (Preferences-minimal-request-change)=
 ### Minimal request change
@@ -505,4 +505,4 @@ You can help the community by donating your data to research projects! Details a
 
 In Preferences, you can define when data shall be uploaded
 - only if connected to Wi-Fi
-- only if charging
+- only if charging

docs/CROWDIN/es/SettingUpAaps/CompletingTheObjectives.md

@@ -153,7 +153,7 @@ This means that when you are on **Objective 6**, if sensor glucose levels are dr
 
 **As a consequence, you have to handle high glucose values with manual insulin bolus corrections.**
 
-- If your basal IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
+- If your IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
 
 ![Example negative IOB](../images/Objective6_negIOB.png)
 
@@ -240,4 +240,4 @@ For example, if you eat the same thing for breakfast at the same time every morn
 
 If you wish to go back in the **Objectives** for whatever reason you can do so by clicking at "clear finished".
 
-![Go back in objectives](../images/Objective_ClearFinished.png)
+![Go back in objectives](../images/Objective_ClearFinished.png)

docs/CROWDIN/es/SettingUpAaps/Preferences.md

@@ -321,7 +321,7 @@ Closed Loop is only possible if you are in **[Objective 6](#objectives-objective
 
 In this mode, [maxIOB](#Open-APS-features-maximum-total-iob-openaps-cant-go-over) is set to zero.
 
-This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if basal IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
+This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
 
 (Preferences-minimal-request-change)=
 ### Minimal request change
@@ -505,4 +505,4 @@ After enabling this option, make sure to perform a manual settings export, where
 
 In Preferences, you can define when data shall be uploaded
 - only if connected to Wi-Fi
-- only if charging
+- only if charging

docs/CROWDIN/fr/SettingUpAaps/CompletingTheObjectives.md

@@ -153,7 +153,7 @@ This means that when you are on **Objective 6**, if sensor glucose levels are dr
 
 **As a consequence, you have to handle high glucose values with manual insulin bolus corrections.**
 
-- If your basal IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
+- If your IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
 
 ![Example negative IOB](../images/Objective6_negIOB.png)
 
@@ -240,4 +240,4 @@ For example, if you eat the same thing for breakfast at the same time every morn
 
 If you wish to go back in the **Objectives** for whatever reason you can do so by clicking at "clear finished".
 
-![Retour arrière dans les Objectifs](../images/Objective_ClearFinished.png)
+![Retour arrière dans les Objectifs](../images/Objective_ClearFinished.png)

docs/CROWDIN/fr/SettingUpAaps/Preferences.md

@@ -321,7 +321,7 @@ Closed Loop is only possible if you are in **[Objective 6](#objectives-objective
 
 In this mode, [maxIOB](#Open-APS-features-maximum-total-iob-openaps-cant-go-over) is set to zero.
 
-This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if basal IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
+This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
 
 (Preferences-minimal-request-change)=
 ### Minimal request change
@@ -505,4 +505,4 @@ Vous pouvez aider la communauté en faisant don de vos données à des projets d
 
 In Preferences, you can define when data shall be uploaded
 - only if connected to Wi-Fi
-- uniquement si en charge
+- uniquement si en charge

docs/CROWDIN/he/SettingUpAaps/CompletingTheObjectives.md

@@ -153,7 +153,7 @@ This means that when you are on **Objective 6**, if sensor glucose levels are dr
 
 **As a consequence, you have to handle high glucose values with manual insulin bolus corrections.**
 
-- If your basal IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
+- If your IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
 
 ![Example negative IOB](../images/Objective6_negIOB.png)
 
@@ -240,4 +240,4 @@ For example, if you eat the same thing for breakfast at the same time every morn
 
 If you wish to go back in the **Objectives** for whatever reason you can do so by clicking at "clear finished".
 
-![חזרה על משימות](../images/Objective_ClearFinished.png)
+![חזרה על משימות](../images/Objective_ClearFinished.png)

docs/CROWDIN/he/SettingUpAaps/Preferences.md

@@ -321,7 +321,7 @@ Closed Loop is only possible if you are in **[Objective 6](#objectives-objective
 
 In this mode, [maxIOB](#Open-APS-features-maximum-total-iob-openaps-cant-go-over) is set to zero.
 
-This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if basal IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
+This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
 
 (Preferences-minimal-request-change)=
 ### Minimal request change
@@ -505,4 +505,4 @@ You can help the community by donating your data to research projects! Details a
 
 In Preferences, you can define when data shall be uploaded
 - only if connected to Wi-Fi
-- only if charging
+- only if charging

docs/CROWDIN/ko/SettingUpAaps/CompletingTheObjectives.md

@@ -153,7 +153,7 @@ This means that when you are on **Objective 6**, if sensor glucose levels are dr
 
 **As a consequence, you have to handle high glucose values with manual insulin bolus corrections.**
 
-- If your basal IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
+- If your IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
 
 ![Example negative IOB](../images/Objective6_negIOB.png)
 
@@ -240,4 +240,4 @@ For example, if you eat the same thing for breakfast at the same time every morn
 
 If you wish to go back in the **Objectives** for whatever reason you can do so by clicking at "clear finished".
 
-![Go back in objectives](../images/Objective_ClearFinished.png)
+![Go back in objectives](../images/Objective_ClearFinished.png)

docs/CROWDIN/ko/SettingUpAaps/Preferences.md

@@ -321,7 +321,7 @@ Closed Loop is only possible if you are in **[Objective 6](#objectives-objective
 
 In this mode, [maxIOB](#Open-APS-features-maximum-total-iob-openaps-cant-go-over) is set to zero.
 
-This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if basal IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
+This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
 
 (Preferences-minimal-request-change)=
 ### Minimal request change
@@ -505,4 +505,4 @@ You can help the community by donating your data to research projects! Details a
 
 In Preferences, you can define when data shall be uploaded
 - only if connected to Wi-Fi
-- only if charging
+- only if charging

docs/CROWDIN/lt/SettingUpAaps/CompletingTheObjectives.md

@@ -153,7 +153,7 @@ This means that when you are on **Objective 6**, if sensor glucose levels are dr
 
 **As a consequence, you have to handle high glucose values with manual insulin bolus corrections.**
 
-- If your basal IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
+- If your IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
 
 ![Example negative IOB](../images/Objective6_negIOB.png)
 
@@ -240,4 +240,4 @@ For example, if you eat the same thing for breakfast at the same time every morn
 
 If you wish to go back in the **Objectives** for whatever reason you can do so by clicking at "clear finished".
 
-![Grįžti į tikslus](../images/Objective_ClearFinished.png)
+![Grįžti į tikslus](../images/Objective_ClearFinished.png)

docs/CROWDIN/lt/SettingUpAaps/Preferences.md

@@ -321,7 +321,7 @@ Closed Loop is only possible if you are in **[Objective 6](#objectives-objective
 
 In this mode, [maxIOB](#Open-APS-features-maximum-total-iob-openaps-cant-go-over) is set to zero.
 
-This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if basal IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
+This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
 
 (Preferences-minimal-request-change)=
 ### Minimal request change
@@ -505,4 +505,4 @@ You can help the community by donating your data to research projects! Details a
 
 In Preferences, you can define when data shall be uploaded
 - only if connected to Wi-Fi
-- only if charging
+- only if charging

docs/CROWDIN/nl/SettingUpAaps/CompletingTheObjectives.md

@@ -153,7 +153,7 @@ This means that when you are on **Objective 6**, if sensor glucose levels are dr
 
 **As a consequence, you have to handle high glucose values with manual insulin bolus corrections.**
 
-- If your basal IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
+- If your IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
 
 ![Example negative IOB](../images/Objective6_negIOB.png)
 
@@ -240,4 +240,4 @@ For example, if you eat the same thing for breakfast at the same time every morn
 
 If you wish to go back in the **Objectives** for whatever reason you can do so by clicking at "clear finished".
 
-![Teruggaan in doelen](../images/Objective_ClearFinished.png)
+![Teruggaan in doelen](../images/Objective_ClearFinished.png)

docs/CROWDIN/nl/SettingUpAaps/Preferences.md

@@ -321,7 +321,7 @@ Closed Loop is only possible if you are in **[Objective 6](#objectives-objective
 
 In this mode, [maxIOB](#Open-APS-features-maximum-total-iob-openaps-cant-go-over) is set to zero.
 
-This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if basal IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
+This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.
 
 (Preferences-minimal-request-change)=
 ### Minimal request change
@@ -505,4 +505,4 @@ Je kunt de community verder helpen door jouw gegevens te doneren aan wetenschapp
 
 In Preferences, you can define when data shall be uploaded
 - only if connected to Wi-Fi
-- only if charging
+- only if charging

docs/CROWDIN/pb/SettingUpAaps/CompletingTheObjectives.md

@@ -153,7 +153,7 @@ This means that when you are on **Objective 6**, if sensor glucose levels are dr
 
 **As a consequence, you have to handle high glucose values with manual insulin bolus corrections.**
 
-- If your basal IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
+- If your IOB is negative (see screenshot below) a temporary basal rate (TBR) > 100% can be triggered in **Objective 6**.
 
 ![Example negative IOB](../images/Objective6_negIOB.png)
 
@@ -240,4 +240,4 @@ For example, if you eat the same thing for breakfast at the same time every morn
 
 If you wish to go back in the **Objectives** for whatever reason you can do so by clicking at "clear finished".
 
-![Go back in objectives](../images/Objective_ClearFinished.png)
+![Go back in objectives](../images/Objective_ClearFinished.png)