DS 102
DS-102 is a smart lightswitch.
By default, it runs Tuya proprietary firmware.
The following models are available (with or without neutral requirement):
- 1 channel
- 2 channels
- 3 channels
Provisioning configuration names:
espqtoggle/various/ds-102/1-channelespqtoggle/various/ds-102/2-channelespqtoggle/various/ds-102/3-channel
- flash mode: QIO
- flash frequency: 40MHz
| Number | Function | Remarks |
|---|---|---|
| 0 | status LED | active low |
| 1 | LED 2 | active low |
| 3 | push button 1 | active low |
| 4 | relay 2 | active high |
| 5 | push button 2 | active low |
| 13 | relay 1 | active high |
| 14 | LED 1 | active low |
| Number | Function | Remarks |
|---|---|---|
| 0 | status LED | active low |
| 1 | LED 3 | active low |
| 3 | push button 2 | active low |
| 4 | relay 2 | active high |
| 5 | push button 3 | active low |
| 12 | push button 1 | active low |
| 13 | relay 1 | active high |
| 14 | LED 2 | active low |
| 15 | relay 3 | active high |
| 16 | LED 1 | active low |
| Id | Type | Description | Range/Unit | Remarks |
|---|---|---|---|---|
push_button1 |
boolean | on/off button 1, setup button | ||
push_button2 |
boolean | on/off button 2 | only models with 2 and 3 channels | |
push_button3 |
boolean | on/off button 3 | only models with 3 channels | |
led1 |
boolean | on/off LED 1 | ||
led2 |
boolean | on/off LED 2 | ||
led3 |
boolean | on/off LED 3 | only models with 3 channels | |
relay1 |
boolean | relay 1 | ||
relay2 |
boolean | relay 2 | only models with 2 and 3 channels | |
relay3 |
boolean | relay 3 | only models with 3 channels | |
button_held |
button_held | button held status |
Follow the Tuya Convert OS procedure.
You can now power your device by connecting it to mains. Follow the initial setup instructions to connect the device to Wi-Fi and add it to your qToggle system.