🔥 infernoflow

Every new AI session starts cold — the gotchas you found, the decisions you made, don't survive. infernoflow makes them stick.

Persistent memory for AI coding sessions. Captures the gotchas, decisions and dead ends your code can't tell an agent — and replays them into your next Cursor / Claude Code / Copilot chat so the same wrong turn never happens twice.

You spent 90 minutes yesterday teaching Claude that your auth API returns 200 even on errors — check the response body, not the status code. Today you ask the same kind of question and watch it write if (response.ok) { return data } all over again. The AI didn't get worse overnight. It just doesn't have memory.

infernoflow is a local-first CLI + VS Code extension + open protocol (AMP) that gives your AI persistent context across sessions. No SaaS. JSONL on disk. Three rule files your IDE already reads.

What's new — 🆕 v0.44.10: session bookmarks

Drop a named resume point mid-session. When the context window fills up or you're about to make a risky change, one command captures the current session's transcript and stores it as a jumpable checkpoint:

infernoflow bookmark "before the SP refactor"

Or just say it in chat — the Cursor beforeSubmitPrompt hook catches phrases like "bookmark this" / "mark this point" / "save this checkpoint" and drops the bookmark itself, no AI cooperation required. Or let the AI do it via the amp_bookmark MCP tool when it notices the session is getting long.

No --note? infernoflow reads Claude Code's own on-disk transcript (~/.claude/projects/…/*.jsonl), distills the last 40 turns to markdown, and stores it as the bookmark's context. Fully deterministic — no model call. Recall any time:

infernoflow bookmark list                # ● has context, ○ marker only
infernoflow bookmark show "SP refactor"  # jump back — see the whole snapshot

Bookmarks are never auto-pruned, and they surface in infernoflow switch under a ## 🔖 Bookmarks — Resume Points section so the next session opens right where work paused.

The loop

Every new AI session today starts cold. The agent re-reads your code, re-derives the obvious, and re-makes the same wrong move someone else made yesterday. infernoflow closes that loop in four stages:

Capture — while you and the agent work, moments worth saving get logged automatically: a gotcha hit, a decision made, an attempted fix that failed, a pattern noticed, a resume point marked. The AI writes them via the amp_write MCP tool. A protocol block injected into the rule files teaches it exactly when. A Cursor beforeSubmitPrompt hook backstops the AI by scanning your prompt for triggers (!!, retry, not working, still broken, bookmark this) and writing the entry deterministically when the AI doesn't.
Link — each captured moment becomes a structured AMP entry (gotcha | decision | attempt | note | detection | pattern | bookmark) with timestamp, file:line, tags, and a stable AMP id.
Persist — entries land in .ai-memory/branches/<branch>.jsonl (git-tracked, travels with your branch — teammates inherit it) plus .ai-memory/global.jsonl (personal preferences, gitignored, synced across your machines via any OS-synced folder).
Restore — when a new session starts, the agent reads CLAUDE.md / .cursorrules / copilot-instructions.md at boot. The most relevant entries are already there. Warm start; no cold derivation.

No service to log into. No SaaS. JSONL on disk, an MCP server, and three rule files your IDE already reads.

Install

npm install -g infernoflow
infernoflow init --yes

Zero runtime dependencies. Works on Node ≥ 18 — macOS, Linux, Windows.

init --yes does the whole setup: creates .ai-memory/, writes rule files for every supported IDE, wires the MCP server for Cursor / VS Code Copilot / Claude Code in one shot, applies the clean-tree git policy, and drops a visible demo entry so you can confirm the loop is alive with:

infernoflow status

The 5-command core + 4

These cover 95% of usage:

Command	What it does
`infernoflow log "..."`	Remember a gotcha / decision / attempt / note. `--type gotcha\|decision\|attempt\|preference`
`infernoflow ask "..."`	Search your memory by keyword — gotchas surface first
`infernoflow switch`	Generate a handoff for the next session. `--copy` puts it on your clipboard
`infernoflow recap`	End-of-session summary with health score + unlogged-change detection
`infernoflow status`	Quick health check — entries, gotchas, decisions, last activity
`infernoflow bookmark "..."`	🆕 Drop a named resume point — auto-captures the session transcript as its context. `list` / `show <id\|label>` / `rm` round it out. Surfaces in `switch`. Never auto-pruned.
`infernoflow refresh`	Manually rebuild `CLAUDE.md` / `.cursorrules` / `copilot-instructions.md` from memory
`infernoflow forget <id\|prefix>`	Delete a memory entry without hand-editing JSONL. `--last` for the newest
`infernoflow prune`	Archive stale `note` / `attempt` entries older than 30 days. Gotchas/decisions/bookmarks never auto-pruned. Default dry-run; `--apply` to act

In practice you barely run any of these — the MCP-aware AI does it for you. The CLI is for grep-style introspection.

infernoflow commands shows the full list (~23 commands, grouped by purpose).

Works with GitHub Copilot Chat — via LMT + MCP

Copilot Chat has supported MCP servers since VS Code 1.102 (GA July 2025), so any MCP-based memory tool can plug in. infernoflow ships two transports side by side so Copilot picks up the same six amp_* tools whichever path is available:

VS Code Language Model Tools (LMT). The infernoflow VS Code extension registers amp_write and amp_read as native LMT tools. No per-project config, no MCP client setup — install the extension and Copilot's tool picker shows 🔥 amp_write. Call by hand with #amp_write / #amp_read in the chat box.
MCP server. infernoflow init wires the MCP server into .vscode/mcp.json too, so Copilot's MCP client can call the same tools if you prefer that route (or want them available to agent mode).

Cursor, Claude Code, and any MCP-capable client use the same MCP server. One product, one disk file, multiple transports — pick whichever fits your setup; both write to the same .ai-memory/.

Keeping it lean: token budget + rotation

The injected memory block is paid for on every AI turn (and twice when a tool loads both CLAUDE.md and copilot-instructions.md). infernoflow ships lean defaults — 4 entries, 5 commits, 200-char truncation, and a compact ~3-line protocol (the full trigger table is redundant with the amp_* tool descriptions, so it's off by default: ~430 tokens/file/turn saved). Tune further in .ai-memory/amp.json:

"config": {
  "injection": {
    "maxEntries": 4,                          // memory entries injected
    "maxCommits": 5,                          // git commits injected
    "maxEntryChars": 200,                     // per-entry truncation
    "targets": ["CLAUDE.md", ".cursorrules"], // drop a file from the list and its stale block is stripped automatically
    "protocolStyle": "compact"                // "compact" (default) · "full" (restore the trigger table) · "off"
  },
  "rotation": {
    "archiveAfterDays": 30,
    "archivableTypes": ["note", "attempt", "detection"],
    "auto": false                             // true → silent prune on every `log`
  }
}

Or write the same values via CLI flags:

infernoflow setup   --max-memory 3 --max-commits 5 --max-entry-chars 200 --protocol-style compact
infernoflow refresh --targets CLAUDE.md,.cursorrules # only these get the block; the rest are stripped
infernoflow refresh --targets auto                   # canonical file for the IDE you're in (kills Copilot's double-load)
infernoflow prune --apply --max-age-days 14          # one-off cleanup

Rotation archives stale note / attempt / detection entries to .ai-memory/archive/sessions-YYYY-MM.jsonl — invisible to the merged read (so the AI, sidebar, ask, and refresh stop surfacing them) but still on disk if you want them back. gotcha, decision, pattern, and bookmark entries are never auto-pruned — that's the knowledge you logged infernoflow FOR.

Two-tier bodies (new in 0.44.10): any entry can carry a rich detail — stored in .ai-memory/details/<id>.md, loaded on demand via readDetail(), and never injected into rule files. The lean index stays lean; you pay for the body only when you open it. log --detail, --detail-file, MCP amp_write detail, and the new amp_bookmark tool all feed it.

Branch-aware memory + cross-machine sync

Your teammate takes your branch — they inherit your memory.

.ai-memory/
├── branches/
│   ├── main.jsonl              ← project-wide truths (git-tracked)
│   └── feature-auth.jsonl      ← your current branch's work (git-tracked)
├── details/                    ← Tier-2 rich bodies (loaded on demand)
│   └── amp_01HXYZ....md
├── global.jsonl                ← your personal preferences (gitignored)
└── sessions.jsonl              ← legacy flat file (still read)

Captures on a feature branch travel with that branch via git. When a teammate runs git checkout feature-auth, the JSONL is there. Their MCP server boots, reads it, regenerates their rule files — their AI is warm-started on your findings without you sending a message.
Personal preferences travel between your own machines. Point at any OS-synced folder once:
```
infernoflow sync set ~/Dropbox/infernoflow-memory
```
Home → work → home. No infra to stand up; the OS does the sync.
merge=union on branch JSONLs means concurrent commits from different machines merge cleanly — no manual conflict resolution.
Branch switching never blocked. Rule files refresh only at MCP server boot or via explicit infernoflow refresh, not on every entry — your working tree stays clean while you log.

Cross-IDE — same memory, every tool

Tool	Reads from	Writes via
Claude Code	`CLAUDE.md`	MCP (`amp_write`)
Cursor	`.cursorrules`	MCP (`amp_write`) + `beforeSubmitPrompt` hook
GitHub Copilot Chat (VS Code)	`.github/copilot-instructions.md`	VS Code LMT (from the extension) + MCP (from `init`) — both wired
GitHub Copilot (JetBrains)	`.github/copilot-instructions.md`	rule files only (read-only surface)
Windsurf	`.windsurfrules`	MCP (planned)

The MCP server is wired by infernoflow setup / init into each tool's config file. No per-tool setup.

MCP tools (for AI agents)

When the MCP server is wired, your AI agent can call these directly in chat:

Tool	What it does
`amp_write`	Log an entry (`type`, `msg`, optional `file` / `line` / `tags` / `detail`)
`amp_read`	Read entries with optional filters
`amp_search`	Keyword search across entries
`amp_bookmark`	🆕 Drop a named resume point — auto-captures the current session transcript when no `note` is given
`amp_handoff`	Generate the handoff document for the next AI session
`amp_health`	Session health score (A–F)
`infernoflow_status`	Memory + project health at a glance
`infernoflow_check`	Validate the capability contract (read-only)
`infernoflow_context`	Generate AI-ready context for a task
`infernoflow_git_drift`	Detect which capabilities recent commits affected

The amp_* tools follow the AMP MCP spec §7.3 — vendor-neutral. Any AMP-Full client only needs to know those six names. The same six are also available as CLI aliases (infernoflow amp read | write | search | bookmark | handoff | health) so the CLI and MCP surfaces match name-for-name.

Every memory line injected into the rule files is prefixed with 🔥 so the AI (and you) can tell at a glance that a line came from infernoflow even when it's quoted out of the managed block. When the AI uses one, the protocol tells it to briefly cite the source — e.g. 🔥 (from infernoflow memory) gotcha at src/api.js:42: API returns 202 not 200.

What it has caught (real dogfood)

infernoflow was developed by building a multi-tenant kanban (infernotest_01) and capturing what it surfaced. A sample of real entries from that dogfood:

gotcha (vite.config.ts): "Vite proxy with changeOrigin: true rewrites the Host header — server-side URL construction produces URLs pointing at the BACKEND port. Build user-facing URLs client-side via window.location.origin."
gotcha (server/prisma/schema.prisma): "Prisma 6 query_engine.dll.node is locked while tsx watch is running; prisma migrate dev fails with EPERM on rename. Stop the dev server before migrating."
gotcha (server/src/routes/members.ts): "Invite accept must NOT burn the token when the caller is already a member of the workspace — return early with the existing membership before marking acceptedAt."
pattern (server/src/routes/columns.ts): "Position assignment for ordered children: next position = max(existing) + 1024. The 1024 step leaves room for ~10 inserts between two siblings without renumbering."
pattern (server/src/access.ts): "Cross-entity auth helpers do where: { memberships: { where: { userId } } } via Prisma nested-select — one DB hop per assertion. Return 404 not 403 when not a member to avoid leaking existence."
decision (server/src/auth.ts): "Opaque session tokens in a Session table (not JWTs) — chosen so we can revoke per-session (deleteMany on Session). bcryptjs over native bcrypt to avoid platform-specific binaries."

These are the things you'd otherwise forget by next Tuesday and re-derive at 11pm on a Friday. They live in .ai-memory/branches/*.jsonl forever.

VS Code extension

The companion extension is the visual surface over your memory:

Live sidebar — ranked-by-relevance gotchas / decisions / attempts for whatever file you're editing.
Gotchas as Problems — logged with a file:line? They appear as yellow squigglies in the editor and rows in the Problems panel, right next to your TypeScript errors. Both you and Copilot see the warning before making the same mistake again.
Status bar health score — always visible: 🔥 B 65 · ⚠3 · ✓2 · ❌1 · 📋 Switch. Click Switch to copy the handoff.
Copilot Chat integration — #amp_write / #amp_read in the chat box; Copilot picks them up via VS Code Language Model Tools registered by the extension (works even without an MCP client configured).
Keyboard-first logging — Ctrl+Alt+G (gotcha) / Ctrl+Alt+D (decision) / Ctrl+Alt+A (ask) / Ctrl+Alt+S (switch) / Ctrl+Alt+R (recap). Right-click in the editor to log a gotcha for the current line.

ext install infernoflow.infernoflow

Or in the Marketplace: infernoflow.infernoflow. Activates on any project with .ai-memory/ (or legacy inferno/).

The extension is window only in v0.7.9+ — the CLI is the single canonical writer of rule files. No race between extension and CLI; the extension watches .ai-memory/**/*.jsonl and renders.

Troubleshooting

I upgraded infernoflow but amp_write entries still look wrong. Your IDE's MCP server is loaded into memory at session start and doesn't reload from disk. Quit and reopen Cursor / Claude Code / VS Code. infernoflow doctor will flag this with a "MCP runtime v… but CLI v…" warning.
infernoflow not found. Use npx infernoflow until the global install resolves on your PATH.
PowerShell script execution blocked. Set-ExecutionPolicy -Scope Process -ExecutionPolicy Bypass.
Box-drawing chars look broken. Force UTF-8 first: [Console]::OutputEncoding = [System.Text.Encoding]::UTF8. Should auto-fall-back to ASCII on legacy PowerShell. If not, open an issue.
infernoflow doctor — full diagnostic if anything looks wrong. Includes the MCP runtime stamp check + AI provider detection + git hooks status.

Why this matters

Code changes daily. What the system actually does under all those edits — the invariants, the constraints, the things that bit you last week — code can't tell you. infernoflow keeps that current and feeds it to the agent so the agent stops re-deriving from scratch.

That's the whole product. No vendor lock-in (it's JSONL on disk). No SaaS. One CLI, one VS Code extension, one open protocol, three rule files your IDE was reading anyway.

Security & privacy

Local-first by design:

🚫 No telemetry. No analytics, no error reporting, no install pings.
🚫 No postinstall script. npm install -g infernoflow runs no code — it only copies files.
🚫 No network calls in any default command path. Everything runs on your machine.
🚫 No auto-updates, no background processes, no cloud sync.
✅ Reads and writes only inside your project directory (.ai-memory/, plus the three rule files at repo root).
✅ Auto-injected content is wrapped in markers ( / ) — your manual edits outside the block are never touched.
✅ Secret patterns rejected on capture — entries matching sk-, ghp_, -----BEGIN are refused at the AMP writer.

The optional infernoflow ai setup command wires an AI provider (Anthropic / OpenAI / Google / Ollama) for a few enrichment commands — same trust model as using that provider directly. Off by default.

Full policy: SECURITY.md. Vulnerability reports: hello@infernoflow.dev or GitHub Security Advisory.

Community

💬 GitHub Discussions — Q&A, ideas, show and tell. First stop for questions.
🐛 Issues — bugs only. Feature requests go in Discussions → Ideas.
🔒 Security Advisories — private disclosure for vulnerabilities.

License

MIT — see LICENSE.

Links

GitHub · Discussions · npm · VS Code Marketplace · infernoflow.dev
AMP protocol spec — vendor-neutral memory format
Dogfood: what infernoflow caught while building infernotest_01
Why your AI coding assistant has amnesia — the case for the protocol

Name		Name	Last commit message	Last commit date
Latest commit History 200 Commits
.github/workflows		.github/workflows
action		action
bin		bin
dist		dist
docs		docs
legacy		legacy
lib		lib
scripts		scripts
templates		templates
tests		tests
vscode-extension		vscode-extension
.agent.md		.agent.md
.gitattributes		.gitattributes
.gitignore		.gitignore
.npmignore		.npmignore
CHANGELOG.md		CHANGELOG.md
INFERNOFLOW_FIXES.md		INFERNOFLOW_FIXES.md
INFERNOFLOW_OUTSTANDING_PLAN.md		INFERNOFLOW_OUTSTANDING_PLAN.md
LICENSE		LICENSE
README.md		README.md
SECURITY.md		SECURITY.md
build.mjs		build.mjs
package-lock.json		package-lock.json
package.json		package.json
tsconfig.json		tsconfig.json
vitest.config.mjs		vitest.config.mjs

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

🔥 infernoflow

What's new — 🆕 v0.44.10: session bookmarks

The loop

Install

The 5-command core + 4

Works with GitHub Copilot Chat — via LMT + MCP

Keeping it lean: token budget + rotation

Branch-aware memory + cross-machine sync

Cross-IDE — same memory, every tool

MCP tools (for AI agents)

What it has caught (real dogfood)

VS Code extension

Troubleshooting

Why this matters

Security & privacy

Community

License

Links

About

Uh oh!

Releases

Packages

Uh oh!

Contributors

Uh oh!

Languages

Folders and files

Latest commit

History

Repository files navigation

🔥 infernoflow

What's new — 🆕 v0.44.10: session bookmarks

The loop

Install

The 5-command core + 4

Works with GitHub Copilot Chat — via LMT + MCP

Keeping it lean: token budget + rotation

Branch-aware memory + cross-machine sync

Cross-IDE — same memory, every tool

MCP tools (for AI agents)

What it has caught (real dogfood)

VS Code extension

Troubleshooting

Why this matters

Security & privacy

Community

License

Links

About

Topics

Resources

License

Security policy

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Uh oh!

Contributors

Uh oh!

Languages

Packages